Lavender Bloom Letter X Keychain Crochet Pattern

This Lavender Bloom Letter X is a soft, puffy initial keychain. The lavender letter body has a small white-and-yellow flower spray across it, and a tiny heart charm swings beside it on a gold chain. It works well as a bag charm, a gift tag that someone can keep, or a personalized key fob.

The colors are calm spring shades: lavender for the letter and heart, white petals with sunny yellow centers, and sage-green leaves and stem. The style is clean amigurumi. Tight single crochet hides the stuffing, and the flat appliqués add texture on the front only.

The finished letter is 4 in (10.2 cm) tall, 3.5 in (8.9 cm) wide and ¾ in (1.9 cm) thick. With the hardware attached, the whole keychain is about 6.5 in (16.5 cm) long. All terms are US crochet terms.

Construction is seamless for the body. You crochet two top arms as closed tubes, join them into one round, shape a pinched waist, and then split the round into two bottom arms. After that you sew on the flowers, leaves, buds and stem, and attach the hardware.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) tall × 3.5 in (8.9 cm) wide × ¾ in (1.9 cm) thick
  • Skill level: Easy-intermediate (working in the round, joining and splitting tubes)
  • Terminology: US crochet terms
  • Yarn weight: Light / DK (#3) cotton
  • Hook: 2.5 mm (US C-2)
  • Number of pieces: 1 stuffed letter body, plus 2 flowers, 5 leaves, 1 stem, 2 buds and 1 two-layer heart charm
  • Layout: Single piece; the floral spray runs from the upper-left arm to the lower-right arm
  • Arm size: 1¼ in (3.2 cm) wide when flattened, about 1¾ in (4.4 cm) long
  • Size before border: Same as the finished size, because there is no added border
  • Border depth: 0 in (0 cm); the rounded tube edge is the finished edge

Materials

Use a smooth, mercerized or combed cotton in DK weight. Cotton keeps the stitches crisp and resists the pilling a keychain gets from daily handling. The yardages below assume about 123 m per 50 g (2.46 m per gram).

  • Lavender (body and heart): 15 g, 37 m (40 yd)
  • White (petals and buds): 3 g, 7 m (8 yd)
  • Sage green (leaves and stem): 3 g, 7 m (8 yd)
  • Yellow (flower centers): 2 g, 5 m (5 yd)

These quantities include a margin of roughly 30% for a gauge swatch and sewing tails.

Tools:

  • 2.5 mm (US C-2) crochet hook
  • Polyester fiberfill, a small handful
  • Tapestry needle
  • 4 stitch markers
  • Gold split ring, 1 in (2.5 cm)
  • Gold curb chain: one length of 1.5 in (3.8 cm) and one of 0.5 in (1.3 cm)
  • 3 gold jump rings and 2 pairs of flat-nose pliers
  • Scissors and a few pins

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • inc – 2 sc in the same stitch
  • dec – invisible decrease: insert hook in the front loop of the next 2 sts, yarn over, pull through both front loops, yarn over, pull through 2 loops
  • MR – magic ring
  • st(s) – stitch(es)
  • ( ) × n – repeat the bracketed steps n times

Special stitch – Petal: (sl st, ch 2, 2 dc, ch 2, sl st) all in the same stitch.

Gauge and Checkpoints

Gauge: 6 sc and 6 rounds = 1 in (2.5 cm) in continuous rounds.

Test one arm first, because the whole letter is built from the same 15-stitch tube. Check these measurements as you go:

  • After Arm Rnd 3 (15 sts): the circle is 0.8 in (2.0 cm) across.
  • After a finished top arm (10 rnds): the tube is 1¼ in (3.2 cm) wide when flattened and about 1¾ in (4.4 cm) long.
  • After Join Rnd 1 (30 sts): the center is 2.5 in (6.4 cm) wide when flattened.
  • After Join Rnd 3 (24 sts): the waist is 2 in (5.1 cm) wide when flattened.
  • Finished letter: 4 in (10.2 cm) tall.

If your arm is too big, go down to a 2.25 mm hook. If it is too small or stiff, go up to a 2.75 mm hook. Keep the fabric tight enough that no stuffing shows through when you stretch the tube gently.

Crocheted lavender heart charm featuring a white daisy with yellow center and green leaves, suspended from a delicate gold chain.

Pattern: Letter Body

Work in continuous spiral rounds without joining unless told otherwise. Move a marker up to the first stitch of each round.

Arm 1 (Top Left)

With lavender:

  • Rnd 1: 6 sc in MR. (6)
  • Rnd 2: inc in each st around. (12)
  • Rnd 3: (sc 3, inc) × 3. (15)
  • Rnds 4–10: sc in each st around. (15)

Sl st in the next st and fasten off. Leave a 4 in (10.2 cm) tail.

Arm 2 (Top Right)

Work as for Arm 1, Rnds 1–10. Do not fasten off.

Joining the Top Arms and Shaping the Waist

Lay the arms side by side with their tips angled outward in a V.

  • Join Rnd 1: With the loop from Arm 2, sc into the inside-edge stitch of Arm 1 where the arms touch, and mark this st as st 1. Sc in the next 14 sts of Arm 1, then sc in all 15 sts of Arm 2. (30)

Stitches 1–15 now sit over Arm 1 (left), and stitches 16–30 sit over Arm 2 (right).

  • Join Rnd 2: (sc 3, dec) × 6. (24)
  • Join Rnd 3: sc in each st around. (24)
  • Join Rnd 4: (sc 3, inc) × 6. (30)

Stuff both top arms and the waist lightly through the opening. Press the work flat as you stuff: the letter should be plump but have a flat front for the appliqués. Use the Arm 1 tail to close the small gap where the arms meet.

The decrease in Rnd 2 and the increase in Rnd 4 balance each other: 30 − 6 = 24, and 24 + 6 = 30. That leaves exactly two 15-stitch halves for the bottom arms.

Arm 3 (Bottom Left)

  • Rnd 1: Sc in Join Rnd 4 sts 1–15, the left half only. Close the loop by working the first sc of the next round into the first sc of this round. (15)
  • Rnds 2–8: sc in each st around. (15)
  • Rnd 9: (sc 3, dec) × 3. (12)
  • Rnd 10: dec × 6. (6)

Add a little more stuffing. Fasten off, weave the tail through the front loops of the last 6 sts, pull it closed and hide the end.

Arm 4 (Bottom Right)

  • Rnd 1: Join lavender in Join Rnd 4 st 16. Sc in sts 16–30, then close the loop as for Arm 3. (15)
  • Rnds 2–10: work as for Arm 3. Finish with 6 sts and close the tip the same way.

Sew the small gap between the bottom arms closed. Each arm has 10 rounds, so the top and bottom halves match and the X stays symmetrical.

Pattern: Floral Spray

Flowers (Make 2)

  • Center: With yellow, 6 sc in MR, sl st to the first sc to join. (6) Fasten off.
  • Petals: Join white in any st. Work 1 Petal in each st around. (6 petals) Sl st to the first sl st and fasten off. Leave a 6 in (15.2 cm) tail for sewing.

Each flower measures 1 in (2.5 cm) across.

Leaves (Make 5)

With sage green, ch 6.

  • Side 1: sc in the 2nd ch from hook, hdc in the next ch, dc in the next ch, hdc in the next ch. Work (sc, ch 1, sc) in the last ch for the base.
  • Side 2: Working along the opposite side of the foundation chain: hdc in the next ch, dc in the next ch, hdc in the next ch, sc in the next ch.
  • Tip: (sl st, ch 2, sl st) in the skipped first chain for the pointed tip.

Fasten off and leave a tail. Each leaf is 0.8 in (2.0 cm) long.

Stem

With sage green, ch 9, which is about 1.5 in (3.8 cm). Fasten off and leave tails at both ends.

Buds (Make 2)

With white, 5 sc in MR. Pull the ring tight so it puffs into a tiny ball, then sl st to the first sc. Each bud is 0.25 in (0.6 cm) across.

Pattern: Heart Charm

Make 2 layers in lavender.

  • Into a MR work: ch 3, 3 tr, 3 dc, ch 1, tr (this is the point), ch 1, 3 dc, 3 tr, ch 3, sl st in the ring. (13 sts plus chains)
  • Pull the ring closed.

Place the two layers back to back. Whipstitch around the edge, adding a pinch of fiberfill before you close it. The heart is 0.6 in (1.5 cm) wide. Sew a ch-4 loop to the top dip of the heart.

Assembly

  1. Pin the stem diagonally from the upper-left arm toward the lower-right arm, crossing the waist. Sew it down along its center.
  2. Pin the upper flower at the inner edge of the upper-left arm, just left of center. Pin the lower flower on the lower-right arm, just below center.
  3. Arrange 3 leaves around the upper flower, fanning toward the arm tip. Tuck 2 leaves along the right side of the lower flower.
  4. Sew down the leaves first, then the flowers, then the 2 buds along the stem between the flowers. Stitch only through the front layer of the letter.
  5. On the top inner edge of the upper-left arm, beside the V, sew a sturdy ch-6 lavender loop through several stitches.
  6. Open a jump ring and link it through the letter loop and the 1.5 in (3.8 cm) chain. Attach the 0.5 in (1.3 cm) chain to the heart loop the same way. Join both chains to the split ring with the last jump ring.

Border

This piece has no border. The edge of each stuffed tube rolls naturally toward the back, which gives the letter its rounded outline. An added edging round would flatten that curve and add width.

So the “border math” is the body math itself: every arm stays at 15 stitches, and the two halves of the 30-stitch join each feed exactly 15 stitches into a bottom arm. If an edge looks uneven, the fix is to adjust the stuffing, not to add stitches.

Final Blocking

  1. Lightly mist the finished letter with water. Avoid soaking it, because wet fiberfill dries slowly.
  2. Lay it face up on a towel and gently press each arm into its diagonal so the tips line up: the top arms angle outward, and so do the bottom arms.
  3. Press the front flat with your palm so the appliqués lie smoothly.
  4. Shape each petal and leaf tip with your fingers.
  5. Let it dry completely, about 6 hours, before you attach the hardware or use it.

Final Quality-Control Checklist

  • The letter measures 4 in (10.2 cm) tall and 3.5 in (8.9 cm) wide.
  • All four arms are the same length and firmness.
  • No fiberfill shows through the stitches.
  • The center gaps are sewn closed.
  • The flowers, leaves and buds are secure, with no loose edges.
  • All yarn tails are woven in and hidden inside the stuffing.
  • The jump rings are fully closed with no gaps.
  • The hanging loop holds firmly when you tug the chain.

Troubleshooting

  • The arms twist when stuffed: This is normal spiral drift. Align the arm when you join, and block it straight.
  • The waist looks too thick: Check that you worked the Join Rnd 2 decreases, and use less stuffing at the center.
  • There are holes at the crotch: Close them with the leftover tail using two or three small stitches.
  • The petals curl: Steam them lightly from a distance, or loosen your tension on the dc.
  • The letter tilts when it hangs: Move the hanging loop closer to the V.
  • The leaves look too short: Add one more starting chain and one more dc on each side.

Care

Spot clean with mild soap and cool water, then press the letter into shape and let it air dry. Do not machine wash it or soak the hardware.

Cream quilted tote bag with crocheted pink flower keychain attached hanging on wooden rod indoors.

Final Notes

The measurement chain is simple. A 15-stitch arm, 1¼ in (3.2 cm) wide, joins into a 30-stitch center, 2.5 in (6.4 cm) wide. That center pinches to a 24-stitch waist, 2 in (5.1 cm) wide, then opens back to 30 stitches and splits into two matching 15-stitch arms. If your first arm matches gauge, the finished letter will come out at 4 in (10.2 cm) tall. The flowers and heart charm then finish the keychain.

Happy crocheting!

Leave a Comment