Lavender Lace Shell Tree Ornament Crochet Pattern

This little ornament is a flat, lacy Christmas tree made of soft lavender shell fans stacked in three tiers above a sturdy brown trunk. Three fans form the base, two sit above them, and a single fan makes the top. Small open diamonds form between the tiers, so the tree looks light and airy when it hangs on a branch.

The palette is simple: one pastel lavender for the tree and loop, and one warm chocolate brown for the trunk. It’s a nice change from traditional red and green, and it works well in a pastel or Scandinavian-style holiday scheme.

The pattern uses US crochet terms. The finished ornament measures about 4.25 in (10.8 cm) wide by 4.25 in (10.8 cm) tall without the loop, and about 6.75 in (17.1 cm) tall including the hanging loop.

You work the tree flat in rows, from the bottom tier up to the top. Each tier is a row of chain loops followed by a row of shells. Then you add the hanging loop at the tip and work the trunk downward from the underside of the foundation chain. It’s all one piece, so there’s no sewing beyond weaving in ends.

Finished Size and Construction

  • Finished size: 4.25 in (10.8 cm) wide x 4.25 in (10.8 cm) tall, plus a 2.5 in (6.4 cm) hanging loop
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted, #3), cotton or cotton blend
  • Hook: 3.5 mm (US E-4)
  • Number of pieces: 1
  • Layout: Single piece with shell tiers of 3–2–1 and a centered trunk
  • Piece size: Tree 4.25 in (10.8 cm) wide x 2.75 in (7.0 cm) tall; trunk 1.2 in (3.0 cm) wide x 1.5 in (3.8 cm) tall
  • Size before border: 4.25 in (10.8 cm) x 4.25 in (10.8 cm)
  • Border depth: None, 0 in (0 cm). The shell scallops form the finished edge.

Materials

Yarn advice: Choose a smooth DK cotton or cotton blend. Cotton shows off the shell stitches clearly and holds a crisp triangle after blocking. Fuzzy or very soft acrylic will blur the open diamonds.

  • Color A, Lavender: 10 g / about 24 m (for the tree and hanging loop)
  • Color B, Chocolate Brown: 4 g / about 10 m (for the trunk)

These quantities include a margin of roughly 20% for your gauge swatch and for weaving in ends. They’re small enough that leftovers from other projects work well.

Tools:

  • 3.5 mm (US E-4) crochet hook
  • Tapestry needle
  • Scissors
  • 2 stitch markers
  • Blocking mat or folded towel
  • Rust-proof pins
  • Spray bottle with water (optional: light spray starch)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • sh – shell

Special stitch: Shell (sh)
Work 9 dc into the indicated ch-6 space. The 5th dc is the center of the shell, and each new tier is anchored there.

Gauge and Checkpoints

Gauge: 20 sc and 21 rows = 4 in (10.2 cm) in Color B with a 3.5 mm hook. That works out to 5 sc and 5.25 rows per 1 in (2.5 cm).

Because this is one small piece, the best test is simply to make the bottom tier first (Rows 1–2) and measure it before you go on.

Measurement checkpoints:

  • After Row 2 (bottom tier): 4.25 in (10.8 cm) wide x 0.9 in (2.3 cm) tall
  • After Row 4 (two tiers): 1.8 in (4.6 cm) tall from the foundation chain
  • After Row 6 (all three tiers): 2.75 in (7.0 cm) tall
  • Trunk after 8 rows: 1.2 in (3.0 cm) wide x 1.5 in (3.8 cm) tall
  • Whole ornament: 4.25 in (10.8 cm) x 4.25 in (10.8 cm), plus the loop

If your tier is too big: Go down to a 3.25 mm hook, or make the ch-6 loops a little firmer.
If your tier is too small or the shells cup: Go up to a 3.75 mm hook. Make sure each ch-6 loop is loose enough to hold 9 dc without bunching.

Lavender crocheted tree with airy lace pattern and tan trunk on a warm wooden surface.

Tree Body (Color A, Lavender)

Rows alternate between a loop row (odd rows) and a shell row (even rows). Each shell row has 1 fewer shell than the shell row below it.

Foundation: With Color A, ch 23.

Row 1 (loop row): Sc in 2nd ch from hook. Ch 6, sk next 6 ch, sc in next ch. Repeat from * 2 more times.
(4 sc, 3 ch-6 sps)

Check: 1 sc uses 1 ch, and each repeat uses 7 ch. That’s 1 + (3 x 7) = 22 ch, plus the 1 skipped ch = 23. ✓

Row 2 (shell row, bottom tier): Ch 1, turn. Sc in first sc. Work 1 sh (9 dc) in next ch-6 sp, sc in next sc. Repeat from * 2 more times.
(31 sts: 3 shells of 9 dc = 27 dc, plus 4 sc)

Each shell fans up and out from its loop, and the sc between shells pinches the fabric to make the scalloped base. Measure here: 4.25 in (10.8 cm) wide.

Row 3 (loop row): Turn. Do not ch. Sl st in each of the first 5 sts (the end sc and dc 1–4 of the first shell). Ch 1, sc in next dc (the 5th dc, center of the first shell). Ch 6, sc in center (5th) dc of next shell. Repeat from * once more.
(3 sc, 2 ch-6 sps; the slip stitches are not counted)

The slip stitches move the yarn to the first shell’s center without adding height, which starts the sloping edge. The last 4 dc and the end sc of the third shell stay unworked, mirroring the first side.

Row 4 (shell row, middle tier): Ch 1, turn. Sc in first sc. Work 1 sh in next ch-6 sp, sc in next sc. Repeat from * once more.
(21 sts: 2 shells of 9 dc = 18 dc, plus 3 sc)

Each new shell sits centered over the sc between two bottom shells. Its ch-6 loop arches over that sc, which leaves the open diamond-shaped holes. Measure: 1.8 in (4.6 cm) tall.

Row 5 (loop row): Turn. Sl st in each of the first 5 sts. Ch 1, sc in next dc (center of the first shell). Ch 6, sc in center (5th) dc of the next shell.
(2 sc, 1 ch-6 sp)

Row 6 (shell row, top tier): Ch 1, turn. Sc in first sc. Work 1 sh in the ch-6 sp, sc in last sc.
(11 sts: 1 shell of 9 dc, plus 2 sc)

Measure: 2.75 in (7.0 cm) tall.

Hanging Loop (Color A)

Row 7 (loop): Turn. Sl st in each of the first 5 sts. Ch 1, sc in next dc (the 5th dc, the tip of the tree). Ch 30. Sl st in the same sc to close the loop. Sl st in the back bump of each of the 30 ch around the loop, then sl st in the sc again. Fasten off, leaving a 6 in (15.2 cm) tail.
(1 sc, 30 ch, 31 sl sts)

The slip stitches turn a floppy chain into a firm, slightly twisted cord. Without stretching, the loop stands about 2.5 in (6.4 cm) tall.

Trunk (Color B, Brown)

Turn the tree upside down so the foundation chain faces up. Find the 6 chains directly under the middle ch-6 space of Row 1. They’re the chains between the 2nd and 3rd sc of Row 1, centered under the middle bottom shell. Put a marker in the first and last of these 6 chains.

Row 1: Join Color B with a sl st in the free loop of the first marked ch. Ch 1, sc in the same ch and in each of the next 5 free loops.
(6 sc)

Rows 2–8: Ch 1, turn, sc in each st across.
(6 sc per row)

Fasten off, leaving a 6 in (15.2 cm) tail. The trunk measures 1.2 in (3.0 cm) wide x 1.5 in (3.8 cm) tall.

Because all 6 trunk stitches come from the chains under one shell, the trunk is centered automatically. It’s slightly narrower than the 1.4 in (3.6 cm) span of the middle shell’s base, which is the look you want.

Border

This ornament has no added border. The edge you see is the natural outline of the shells, and the border depth is 0 in (0 cm).

Border gauge: Not applicable. The edge stitches are the shell stitches themselves, at the gauge above.

Edge counts per side:

  • Bottom edge: 3 shell bases, with the trunk centered under the middle one
  • Left sloping edge: 3 shell outer halves (4 dc + end sc each), one per tier
  • Right sloping edge: 3 shell outer halves, mirroring the left
  • Tip: 1 sc at the top shell’s center, carrying the hanging loop

Why the math works: Each shell has 9 dc with its center at dc 5. Every loop row slips across exactly 5 sts (1 sc + 4 dc) and anchors at a shell center. That means each tier steps in by exactly half a shell on each side: 3 shells, then 2, then 1. Both sides lose the same amount on every tier, so the sloping edges are straight and symmetric, and the tip lands exactly at the center. Adding a border would fill in the scallops and soften the stepped tree silhouette, which is why the design leaves the edge plain.

Final Blocking

  1. Weave in all ends first, except the trunk tail. Run each tail through stitches of its own color so nothing shows through the open diamonds.
  2. Weave in the brown tail up the trunk side so it doesn’t show on the lavender.
  3. Lightly mist the ornament with water until it’s damp but not dripping.
  4. Lay it flat on the blocking mat, right side up.
  5. Pin the tip, then the two bottom outer corners of the bottom tier, to make a triangle 4.25 in (10.8 cm) wide and 2.75 in (7.0 cm) tall.
  6. Gently open each shell into an even fan. Push a pin through each open diamond to keep it open.
  7. Square the trunk to 1.2 in (3.0 cm) x 1.5 in (3.8 cm) and pin its two bottom corners.
  8. Pin the hanging loop flat in a teardrop shape about 2.5 in (6.4 cm) tall.
  9. Optional: give a light spray of starch for a crisper hanging shape.
  10. Leave it to dry completely, usually 4–6 hours, before unpinning.

Final Quality-Control Checklist

  • [ ] Shell rows count 31, 21 and 11 sts (3, 2 and 1 shells).
  • [ ] Every shell has exactly 9 dc.
  • [ ] Each upper shell is centered over the sc between two lower shells.
  • [ ] There are 3 open diamond holes: 2 between the bottom and middle tiers, and 1 between the middle and top tiers.
  • [ ] Both sloping sides step in evenly and look like mirror images.
  • [ ] The trunk is 6 sc wide x 8 rows, centered under the middle bottom shell.
  • [ ] The tree measures 4.25 in (10.8 cm) wide and the ornament 4.25 in (10.8 cm) tall.
  • [ ] The hanging loop is firm, about 2.5 in (6.4 cm) tall, and attached at the exact tip.
  • [ ] All ends are hidden in matching colors.
  • [ ] The piece lies flat with no cupping or ruffling.

Troubleshooting

Shells ruffle or curl: The ch-6 loops are too tight for 9 dc. Loosen your chains, or go up a hook size for the chain loops only.

Shells look gappy and flat: The loops are too loose. Chain more firmly, or go down a hook size.

Tree leans to one side: You probably slipped across 4 or 6 sts instead of 5 on a loop row. Count the sl sts again so every tier anchors at dc 5.

Diamonds closed up: You may have worked the shell into the sc instead of the ch-6 space. Each shell goes into the space so the loop arches over the sc below.

Trunk off-center: Count from the sc on each side of the middle loop. There should be exactly 6 free chain loops between them.

Loop stretches out: Make sure you worked the return sl sts through the back bumps of the chain. That doubles the cord’s strength.

Edges won’t block straight: Re-wet the piece and pin the three tree corners first, then the shells in between.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, reshaping as you did for blocking. Store flat or hanging, away from direct sunlight, so the lavender doesn’t fade.

Purple crocheted tree ornament with brown trunk hanging from evergreen branch against twinkling golden Christmas lights.

Final Notes

Here’s the measurement chain that makes the ornament: 20 sc = 4 in (10.2 cm) gauge, then a 23-ch foundation and a bottom tier 4.25 in (10.8 cm) wide at 0.9 in (2.3 cm) tall. The middle tier brings it to 1.8 in (4.6 cm), and the top tier to 2.75 in (7.0 cm). The 6-st x 8-row trunk adds 1.5 in (3.8 cm), for a 4.25 in (10.8 cm) square outline, and the 2.5 in (6.4 cm) loop brings the full hanging height to 6.75 in (17.1 cm).

Check your size at each tier and keep every shell at 9 dc, and the tree shapes itself. Make one in an evening, then make a few more for the tree, gift tags or a garland of your own.

Happy crocheting!

Leave a Comment