This hanging holder stacks three small round baskets on soft cream straps. Each basket holds one standard toilet roll, and the whole piece hangs from a single wall hook. It’s a simple way to add storage and some color to a small bathroom.
Each basket has a solid lavender base and lavender shell-stitch walls. A row of cream shells at the top makes a band of little cream fans, and a cream rim with a corded edge finishes it off. The colors are soft and calm, and the shells give the baskets a slightly rounded look.
The pattern uses US crochet terms. Each basket is about 5.5 in (14.0 cm) across and 4.25 in (10.8 cm) tall. Once it’s assembled and hung, the holder measures about 24.25 in (61.6 cm) from the hook to the bottom of the lowest basket.
You’ll make three identical baskets, all worked in joined rounds. Each one starts with a flat single crochet circle, turns upward with a back-loop round, and then builds shell rounds and a cream rim. After that you make one long hanging cord and four short connector straps, then sew everything together.
Finished Size and Construction
- Finished size (hung): about 24.25 in (61.6 cm) from hook to bottom
- Skill level: Easy (confident beginner)
- Terminology: US crochet terms
- Yarn weight: worsted (#4) cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 8 (3 baskets, 1 hanging cord, 4 connector straps)
- Layout: 3 baskets stacked in one vertical column
- Piece size (one basket): 5.5 in (14.0 cm) across x 4.25 in (10.8 cm) tall
- Size before border: 5.5 in (14.0 cm) across x 3.5 in (8.9 cm) wall height
- Border depth: 0.75 in (1.9 cm), worked as 3 rim rounds
Materials
Use a smooth worsted cotton or cotton blend. Cotton holds its shape, handles bathroom humidity well, and shows off the shell texture. Avoid very soft, drapey acrylic, because the baskets will sag under the weight of the rolls.
- Color A – Lavender: 110 g, about 187 m
- Color B – Cream: 60 g, about 102 m
These amounts assume a yarn of about 85 m per 50 g. They include a margin of roughly 10–15 percent for your test basket and for differences in tension.
Tools:
- 5.0 mm (H-8) crochet hook
- Stitch markers (at least 4)
- Tapestry needle
- Scissors
- Measuring tape
- One wall hook with hardware, rated for at least 1 lb (0.5 kg)
- Three toilet rolls or small rolled towels, for blocking
Abbreviations (US Terms)
- MR – magic ring
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- BLO – back loop only
- rsc – reverse single crochet (crab stitch)
- st(s) – stitch(es)
Special stitches:
- Shell: 5 dc in the same stitch. The center stitch is the 3rd dc.
- Split shell: At the start of a round, ch 3 (counts as 1 dc) and work 2 dc in the same stitch. At the end of that round, work 2 dc in the same first stitch, then join to the top of the ch-3. The two halves together make one full 5-stitch shell.
- Reverse single crochet (rsc): Work from left to right (right to left if you’re left-handed). Insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops. This makes the corded edge.
Gauge and Checkpoints
Gauge: 14 sc and 16 rounds = 4 in (10.2 cm). In the shell pattern, 2 shell rounds = 1 in (2.5 cm) tall.
Make one complete basket before you start the other two. It’s your real gauge swatch, and it’s the best way to check that a roll fits.
Checkpoints:
- After Rnd 5 (30 sts): the base is about 2.75 in (7.0 cm) across.
- After Rnd 10 (60 sts): the base is about 5.5 in (14.0 cm) across and lies flat.
- After Rnd 18: the walls are about 3.5 in (8.9 cm) tall, measured from the Rnd 11 ridge.
- After Rnd 21: the walls are about 4.25 in (10.8 cm) tall.
If your basket comes out too big, switch to a 4.5 mm hook. If it’s too small and a roll (about 4.5 in / 11.4 cm across) won’t drop in easily, switch to a 5.5 mm hook. Don’t change the stitch count. The shell pattern needs a multiple of 6, so the round must stay at 60 stitches.

Basket (Make 3)
Base
Use Color A. Join every round with a sl st to the first stitch. The ch 1 at the start of a round doesn’t count as a stitch.
Rnd 1: MR, ch 1, 6 sc in ring, join. (6 sts)
Rnd 2: Ch 1, inc in each st around, join. (12 sts)
Rnd 3: Ch 1, [sc in next st, inc] 6 times, join. (18 sts)
Rnd 4: Ch 1, [sc in next st, inc, sc in next st] 6 times, join. (24 sts)
Rnd 5: Ch 1, [sc in next 3 sts, inc] 6 times, join. (30 sts)
Rnd 6: Ch 1, [sc in next 2 sts, inc, sc in next 2 sts] 6 times, join. (36 sts)
Rnd 7: Ch 1, [sc in next 5 sts, inc] 6 times, join. (42 sts)
Rnd 8: Ch 1, [sc in next 3 sts, inc, sc in next 3 sts] 6 times, join. (48 sts)
Rnd 9: Ch 1, [sc in next 7 sts, inc] 6 times, join. (54 sts)
Rnd 10: Ch 1, [sc in next 4 sts, inc, sc in next 4 sts] 6 times, join. (60 sts)
Moving the increases around from round to round keeps the circle round instead of hexagonal. Check the 5.5 in (14.0 cm) base measurement now.
Walls
Rnd 11 (turning round): Ch 1, sc in BLO of each st around, join. (60 sts)
This round leaves a ridge on the outside and makes the work turn upward to start the walls.
Rnd 12: Ch 1, sc in first st, [skip 2 sts, shell in next st, skip 2 sts, sc in next st] 9 times, skip 2 sts, shell in next st, skip 2 sts, join to first sc. (10 shells + 10 sc = 60 sts)
Rnd 13: Start a split shell in the joining sc. Sc in the center dc of the next shell, [shell in next sc, sc in center dc of next shell] 9 times. Finish the split shell with 2 dc in the first st, then join to the top of the ch-3. (9 full shells + 1 split shell + 10 sc = 60 sts)
This round moves the shells half a repeat, so each new shell sits above an sc from the round below.
Rnd 14: Ch 1, sc in the joining st (the center of the split shell), [shell in next sc, sc in center dc of next shell] 9 times, shell in last sc, join to first sc. (10 shells + 10 sc = 60 sts)
Rnds 15–16: Repeat Rnds 13–14. (60 sts in each round)
On the last sl st of Rnd 16, pull through Color B. Fasten off Color A, leaving a 6 in (15.2 cm) tail.
Rnd 17 (Color B): Repeat Rnd 13. (60 sts)
This is the band of cream fans just below the rim.
Rnd 18 (Color B, leveling round): Ch 1, sc in the top of the ch-3 and in the next 2 dc, dc in next sc, [sc in next 5 dc, dc in next sc] 9 times, sc in the last 2 dc, join. (60 sts worked 1 per existing stitch + 0 added = 60 sts: 50 sc + 10 dc)
The dc stitches fill the low spots between the fans, so the top edge comes out level for the rim. The walls should now measure 3.5 in (8.9 cm).
Make All Pieces
Baskets: Make 3, each in Color A (Rnds 1–16) and Color B (Rnds 17–21). Work the rim (Rnds 19–21, below) on every basket.
Hanging cord (make 1, Color B): Ch 81. Sc in the back bump of the 2nd ch from the hook and in each ch across. (80 sc, about 20 in / 50.8 cm). Fasten off, leaving 10 in (25.4 cm) tails at both ends.
Connector straps (make 4, Color B): Ch 25. Sc in the back bump of the 2nd ch from the hook and in each ch across. (24 sc, about 6 in / 15.2 cm). Fasten off, leaving 10 in (25.4 cm) tails at both ends.
Working into the back bumps gives a neat, braid-like cord that won’t stretch much.
Color totals: Color A covers 3 bases plus walls up to Rnd 16. Color B covers 3 sets of Rnds 17–21, 1 hanging cord, and 4 straps.
Layout (front view):
[ HOOK ]
/ \
hanging cord (1)
/ \
[ BASKET 1 ] (top)
| |
strap strap
| |
[ BASKET 2 ] (middle)
| |
strap strap
| |
[ BASKET 3 ] (bottom)
Joining
Method: Whipstitch each strap end to the rim with the tail and a tapestry needle.
Stitch-to-stitch logic: On each basket, mark rim st 1 and st 31. They sit exactly opposite each other, with 30 stitches on each side. Every strap end covers 2 rim stitches (the marked st plus the next one) and overlaps the rim by 0.5 in (1.3 cm), which is the depth of Rnds 19–20.
- Basket 1 to Basket 2: Sew the top end of one strap to the outside of Basket 1 at st 1–2. Let it run down the outside wall and tack it once at the Rnd 11 ridge. Sew the bottom end to the outside of Basket 2’s rim at st 1–2. Do the same with a second strap at st 31–32.
- Basket 2 to Basket 3: Repeat step 1 with the remaining two straps.
- Hanging cord: Sew one end inside Basket 1’s rim at st 1–2 and the other end at st 31–32. The center of the cord is the hook loop.
Strap math: Each 6 in (15.2 cm) strap = 0.5 in (1.3 cm) top overlap + 3.75 in (9.5 cm) down the upper wall + 1.25 in (3.2 cm) gap + 0.5 in (1.3 cm) bottom overlap.
Tension: Sew firmly through both the rim stitches and the strap. Make 3 passes per end, but don’t pull so hard that the rim puckers. Weave each tail back through the strap.
Size checkpoint: The stack of 3 baskets should measure 15.25 in (38.7 cm): 3 x 4.25 in plus 2 x 1.25 in gaps. The hanging cord leaves 19 in (48.3 cm) free, or 9.5 in (24.1 cm) per side, which gives a drop of about 9 in (22.9 cm). That brings the total to about 24.25 in (61.6 cm).
Border
Work this rim on each basket before joining. It uses Color B and continues from Rnd 18.
Border gauge: 60 sts around a 17.1 in (43.4 cm) circumference = 3.5 sts per inch (2.5 cm). That matches the base gauge.
Rnd 19: Ch 1, sc in each st around, join. (60 sts: 30 on the front half, 30 on the back half)
Rnd 20: Ch 1, sc in each st around, join. (60 sts: 30 + 30). Place markers in st 1 and st 31 for the straps.
Rnd 21: Ch 1, rsc in each st around, join. (60 sts: 30 + 30). Fasten off and weave in the ends.
Why the math works: The base finishes at 60 stitches, and every wall and rim round also has exactly 60. With no increases above the base, the walls rise straight up from a base of the same size. Since 60 is 10 repeats of 6, the shells close evenly, and the 30 + 30 split puts the strap points directly opposite each other. That’s why the baskets hang level.
Final Blocking
- Lightly spray each basket with water until it’s damp but not soaked.
- Put a toilet roll or a rolled towel inside to shape the walls.
- Press the base flat on a towel and smooth the rim into a circle.
- Pull each shell gently so its 5 dc fan out evenly.
- Lay the straps and cord out straight and pin them if they twist.
- Let everything dry completely, about 24 hours, before you join or hang it.
Final Quality-Control Checklist
- Every base measures 5.5 in (14.0 cm) and lies flat.
- Every round has 60 stitches from Rnd 10 to Rnd 21.
- The shells alternate cleanly, with 10 per round.
- The cream band has 10 even fans on every basket.
- Every wall measures 4.25 in (10.8 cm).
- The straps are attached at st 1–2 and st 31–32, directly opposite each other.
- The gaps between baskets are 1.25 in (3.2 cm).
- The whole piece hangs level from the hook.
- All ends are woven in and secure.
Troubleshooting
- Base cups or ruffles: A base that cups means your tension is too tight. One that ruffles means it’s too loose or the increases are stacking up. Re-count each round against 6 x the round number.
- Shells lean or overlap: Check that you skipped exactly 2 stitches on each side of every shell.
- Basket tilts when hung: Re-sew the straps exactly 30 stitches apart.
- Roll won’t fit: Go up half a hook size and make the basket again.
- Rim flares: Work Rnd 21 with a slightly tighter hand, or use a 4.5 mm hook for the rim only.
- Straps stretch: Make sure you worked into the back bumps, not the top loops.
Care
Hand wash in cool water and lay flat to dry, with a roll inside each basket to keep the shape. Don’t hang it to dry while it’s wet, because the weight will stretch the straps.

Final Notes
Here’s how the measurements build on each other. A 60-stitch base 5.5 in (14.0 cm) across goes up through 3.5 in (8.9 cm) of shell walls and a 0.75 in (1.9 cm) rim, for a 4.25 in (10.8 cm) basket. Three baskets with 1.25 in (3.2 cm) gaps make a 15.25 in (38.7 cm) stack, and the 9 in (22.9 cm) hanging drop brings the total to 24.25 in (61.6 cm). If your first basket hits its checkpoints, the other two and the finished holder will come out right too.
Happy crocheting!