This hanging toilet paper holder stacks four small round baskets on two long cords. Spare rolls stay visible and easy to reach. Each basket has a solid cream base, an open wall of radiating fans and a lilac rim with a rope-like finish.
The colors are soft and calm. Cream cotton is used for the bases, walls and straps, and dusty lilac for the rims. The style is vintage lace with a practical job, and it suits a small bathroom with warm wood and plants.
The pattern uses US crochet terms. The finished holder hangs about 25.5 in (64.8 cm) from the wall knob to the bottom basket. Each basket is about 5.5 in (14.0 cm) across and 2.9 in (7.4 cm) tall, which holds a standard roll of about 4.5 in (11.4 cm) diameter.
The construction is simple. You crochet four identical baskets in joined rounds from the base up, then two straps that each have a hanging loop at one end. You sew the straps to opposite sides of each basket, and both loops go over a single wall knob or hook.
Finished Size and Construction
- Finished size: about 25.5 in (64.8 cm) hanging length; the basket stack is 18.3 in (46.5 cm)
- Skill level: Easy-Intermediate
- Terminology: US terms
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 6 (4 baskets, 2 straps)
- Layout: 4 baskets in one vertical column, with 2 straps running up opposite sides
- Piece size: each basket is 5.5 in (14.0 cm) in diameter x 2.9 in (7.4 cm) tall; each strap is 26 in (66.0 cm) long x 0.6 in (1.5 cm) wide
- Size before border: the basket wall is 2.3 in (5.8 cm) tall before the lilac rim
- Border depth: the lilac rim is about 0.6 in (1.5 cm)
Materials
Choose a smooth, firm cotton or cotton blend in worsted weight. Cotton holds the basket shape and shows the fan spokes clearly. Avoid fuzzy or very soft acrylic, which makes the walls slump.
- Cream: 170 g, about 289 m (316 yd)
- Lilac: 30 g, about 51 m (56 yd)
These amounts include a margin of roughly 15 percent to cover a gauge swatch and small differences in tension.
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- 4 locking stitch markers
- Scissors
- Measuring tape
- Pins and a blocking surface
- A wall knob or hook to hang the finished holder
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- tr: treble crochet
- inc: 2 sc in the same stitch
- BLO: back loop only
- sp: space
- MR: magic ring
- rev sc: reverse single crochet (crab stitch)
- st(s): stitch(es)
Fan: (dc, ch 1) 6 times, then dc, all in the same stitch. This makes 7 dc spokes with 6 ch-1 spaces between them. The 4th dc is the center dc.
Reverse sc: Work from left to right (for right-handers). Insert the hook in the next stitch to the right, yarn over and pull up a loop. Yarn over again and pull through both loops.
Gauge and Checkpoints
Gauge: 14 sc x 15 rounds = 4 in (10.2 cm) in sc worked in joined rounds. That equals 3.5 sc per inch.
Make one basket first as your test. The base is the best place to check gauge, because every later count depends on it.
Checkpoints:
- After Round 5 (30 sts), the base should measure about 2.6 in (6.6 cm) across.
- After Round 10 (60 sts), the base should measure 5.25 in (13.3 cm) across and lie flat.
- After Round 14, the wall should measure about 2.3 in (5.8 cm) up from the base edge.
- After Round 17, the finished basket should measure 5.5 in (14.0 cm) across and 2.9 in (7.4 cm) tall.
If your base is too big or ruffles, go down to a 4.5 mm hook. If it is too small or curves upward before Round 11, go up to a 5.5 mm hook. Change the hook, not the stitch counts, because the fan repeat needs exactly 60 stitches.

Basket (Make 4)
Join every round with a sl st to the first sc. The ch 1 at the start of each round does not count as a stitch.
Base
With cream, make a MR.
Round 1: Ch 1, 6 sc in ring, join. (6 sts)
Round 2: Ch 1, inc in each st around, join. (12 sts)
Round 3: Ch 1, (sc, inc) 6 times, join. (18 sts)
Round 4: Ch 1, (2 sc, inc) 6 times, join. (24 sts)
Round 5: Ch 1, (3 sc, inc) 6 times, join. (30 sts)
Round 6: Ch 1, (4 sc, inc) 6 times, join. (36 sts)
Round 7: Ch 1, (5 sc, inc) 6 times, join. (42 sts)
Round 8: Ch 1, (6 sc, inc) 6 times, join. (48 sts)
Round 9: Ch 1, (7 sc, inc) 6 times, join. (54 sts)
Round 10: Ch 1, (8 sc, inc) 6 times, join. (60 sts)
Check the base now. It should be 5.25 in (13.3 cm) across and lie flat.
Wall
Round 11 (turning round): Ch 1, sc in BLO of each st around, join. (60 sts)
The unused front loops form a neat ridge, and the wall starts to rise straight up.
Round 12: Ch 1, sc in each st around, join. (60 sts)
Put a marker in stitch 1 and another in stitch 31. These mark the two strap positions, exactly opposite each other.
Round 13 (fan round): Ch 1, sc in first st, *skip 4 sts, Fan in next st, skip 4 sts, sc in next st; repeat from * 4 more times, skip 4 sts, Fan in next st, skip 4 sts, join to first sc. (6 sc and 6 Fans)
Each repeat uses 10 stitches: 1 sc + 4 skipped + 1 Fan + 4 skipped. Six repeats use all 60 stitches. The sc stitches sit in the low “valleys” between the fans, so stitch 1 and stitch 31 are both valley points.
Round 14 (leveling round): Sl st in each of the next 7 sts and spaces to reach the center dc of the first Fan. Ch 1, sc in the same center dc, *ch 2, (tr, ch 1, tr, ch 1, tr) in next valley sc, ch 2, sc in center dc of next Fan; repeat from * around, leaving out the last sc on the final repeat, join to first sc.
Each repeat counts as 10 stitches: 1 sc + 2 ch + 3 tr + 2 ch-1 + 2 ch. That makes 60 sts in total, counting each chain as one stitch.
The tr groups fill the valleys and form a second band of small upward spokes, offset from the fans below. The top edge is now level. Fasten off cream.
Lilac Rim (Border)
The rim rounds are written out in the Border section below. Finish them on each basket before joining.
Strap (Make 2)
With cream, ch 10 and sl st in the first ch to form the hanging loop ring.
Ch 92.
Round 1: Work back toward the ring: 3 sc in 2nd ch from hook, then sc in each of the next 90 ch. Work 14 sc in the ring. Then, along the opposite side of the foundation chain, sc in each of the next 90 ch, and join to the first sc. (197 sts: 3 + 90 + 14 + 90)
The 3 sc make a rounded bottom end. The 14 sc around the ring make a firm loop about 1 in (2.5 cm) across.
Round 2: Sl st loosely in each st around, join. (197 sl sts)
The slip stitches give the strap its braided, rope-like surface. Fasten off, leaving an 8 in (20.3 cm) tail.
Checkpoint: The straight part of the strap, from the bottom end to the ring, should measure 26 in (66.0 cm). That is 91 stitches along each long edge at 3.5 sts per inch. If yours is off by more than 1 in (2.5 cm), change the chain count and make it again. Make the second strap at the same tension so the holder hangs level.
Make All Pieces
Cream: 4 bases and walls, 2 straps
Lilac: 4 rims
Count the stitches along each strap edge from the bottom end, 91 stitches in total. Mark the sections with pins or scrap yarn:
( wall knob )
/ \
strap sts 65-91 strap sts 65-91 free hanging section
| |
+----[ Basket 4 ]----+ strap sts 55-64
| gap | strap sts 47-54
+----[ Basket 3 ]----+ strap sts 37-46
| gap | strap sts 29-36
+----[ Basket 2 ]----+ strap sts 19-28
| gap | strap sts 11-18
+----[ Basket 1 ]----+ strap sts 1-10
Each basket section is 10 strap stitches, about 2.9 in (7.4 cm), which matches the basket height. Each gap is 8 strap stitches, about 2.3 in (5.8 cm). The free section is 27 stitches, about 7.7 in (19.6 cm).
Stack check: 4 x 10 + 3 x 8 = 64 stitches, or 18.3 in (46.5 cm). Add the 27 free stitches for 91 in total.
Joining
Method: whipstitch, using a cream yarn tail or a separate length of cream.
Lay the first strap flat against the outside of Basket 1, centered over the column at marked stitch 1. The rounded bottom end sits level with the base edge (the ridge between Rounds 10 and 11).
Stitch-to-stitch logic: Sew along both long edges of the strap section. Make one whipstitch through each strap edge stitch, catching a strand of the basket wall in the same column directly beneath it. That gives 10 whipstitches per edge, or 20 per basket for each strap. On the fan rounds, catch the valley sc and the base of the tr group, which both sit on the marked column.
Attach the second strap the same way at stitch 31. Then repeat for Baskets 2, 3 and 4, using the strap sections shown in the grid.
Tension advice: Pull each whipstitch snug enough that the strap lies flat, but not tight. Tight seams pucker the wall and shorten the gaps. Keep both straps straight and parallel, and lay the work flat on a table while you sew.
Size checkpoint: Measure from the bottom of Basket 1 to the top of Basket 4’s rim. It should be 18.3 in (46.5 cm) along both straps. If the two sides differ by more than 0.5 in (1.3 cm), one seam is pulled too tight, so sew it again.
Border: Lilac Rim
Work the rim on each basket after Round 14. It uses the same gauge as the base: 3.5 sc per inch.
Border gauge: The rim has 60 sts. The basket’s outer diameter is 5.5 in (14.0 cm), so its circumference is about 17.3 in (43.9 cm). At 3.5 sts per inch, 17.3 in needs about 60 sts. The rim matches the wall exactly, so it stands straight without flaring out or pulling in.
Round 15 (conversion round): Join lilac in the first sc of Round 14. Ch 1, sc in each sc and each tr, 1 sc in each ch-1 sp, and 2 sc in each ch-2 sp, join.
Count: 60 sts worked one for each existing stitch (counting each chain as one) + 0 extra stitches = 60 sc. Per repeat: 1 (sc) + 2 (ch-2 sp) + 3 (tr) + 2 (ch-1 sps) + 2 (ch-2 sp) = 10. Six repeats = 60 sc.
Round 16: Ch 1, sc in each st around, join. (60 sts)
Round 17: Ch 1, rev sc in each st around, join. (60 sts)
The reverse sc rolls into a twisted, rope-like edge. Fasten off and weave in the ends.
Why the math works: The base ends at 60 sts and the wall stays at 60 sts through Round 12. The fan round and the leveling round each use a 10-stitch repeat 6 times, and the rim comes back to 60 sc. No stitches are added or lost between the base and the rim, so the basket stays a straight-sided cylinder.
Final Blocking
- Soak all pieces in cool water with a little wool wash or mild soap.
- Roll them in a towel and press out the extra water. Do not wring.
- Slide each basket over a jar, or over a toilet roll wrapped in plastic, about 5 in (12.7 cm) across.
- Gently push the fans upward and open the ch-1 spaces with your fingers.
- Lay the joined holder flat with the baskets on their sides, and pin the straps straight.
- Check that the baskets are 2.9 in (7.4 cm) tall and the gaps are 2.3 in (5.8 cm).
- Let everything dry completely, usually about 24 hours.
Final Quality-Control Checklist
- Every base lies flat and measures 5.25 in (13.3 cm).
- Every rim has 60 sts and measures 5.5 in (14.0 cm) across.
- All four baskets have 6 fans with open, even spokes.
- Both straps measure 26 in (66.0 cm) along the straight section.
- The straps are sewn at stitch 1 and stitch 31, exactly opposite each other.
- The stack measures 18.3 in (46.5 cm) on both sides.
- The holder hangs level from the knob.
- All ends are woven in securely.
Troubleshooting
Base curves upward: Your tension is too tight for this stitch count. Go up a hook size.
Base ruffles: Your tension is too loose. Go down a hook size.
Fans crowd or overlap: You skipped fewer than 4 sts. Recount so each repeat uses 10 stitches.
Top edge is wavy before the rim: The tr groups are too short. Pull the loops up a little taller.
Rim flares: You probably worked 3 sc in a ch-2 space. Recount Round 15 so it has 60 sts.
Holder tilts: One strap is longer or one seam is tighter. Measure again and re-sew.
Basket sags under a roll: The wall is too loose. Use cotton and a smaller hook.
Care
Hand wash in cool water, then reshape the baskets over a jar and lay flat to dry. Don’t tumble dry, because heat can shrink cotton and pull the fans out of shape.

Final Notes
The measurements build on each other. Gauge sets 3.5 sts per inch, which gives a 60-stitch base 5.25 in (13.3 cm) across. The wall keeps those 60 stitches as six 10-stitch fan repeats, and the 60-stitch lilac rim brings each basket to 5.5 in (14.0 cm) across and 2.9 in (7.4 cm) tall. Two 91-stitch straps carry the four baskets on 10-stitch sections with 8-stitch gaps. That gives an 18.3 in (46.5 cm) stack and a 25.5 in (64.8 cm) hanging length.
Check each stage before moving on, and the holder will hang straight and hold rolls neatly.
Happy crocheting!