This hanging holder stacks three small oval baskets between two crocheted straps and hangs from one wooden ring. A tall, pointed back panel rises from each basket, so every tier has a teardrop silhouette. The baskets nest neatly, with each point tucked just under the basket above it.
Everything is worked in one soft sage green cotton. Each basket has a firm single crochet base, a wall with two tiers of open arches between solid bands, and a solid point with three rows of small eyelets. A reverse single crochet edge finishes the rim and the point. The look is clean and calm, which suits a bathroom.
The pattern uses US crochet terms. The finished holder measures about 24 in (61.0 cm) from the top of the ring to the bottom of the lowest basket and 6 in (15.2 cm) wide. Each basket is 5.75 in (14.6 cm) wide, 5 in (12.7 cm) deep, and 6 in (15.2 cm) tall at the back point. Each one holds a standard toilet roll standing upright.
You make three baskets in the round, from the base up through the arches to the rim. Then you work the point in rows off the back of the rim and add a border. Finally, you make two flat straps, wrap them over the ring, and sew the baskets between them.
Finished Size and Construction
- Finished size: about 24 in (61.0 cm) tall × 6 in (15.2 cm) wide
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 5 crocheted pieces (3 baskets, 2 straps), plus 1 wooden ring
- Layout: 3 baskets stacked vertically between 2 straps
- Basket base: 5.75 in × 5 in (14.6 cm × 12.7 cm)
- Basket wall before border: 2.25 in (5.7 cm) tall
- Border depth: 0.25 in (0.6 cm)
- Basket side height with border: 2.5 in (6.4 cm)
- Strap: 24 in × 0.5 in (61.0 cm × 1.3 cm)
Materials
Choose a smooth worsted-weight cotton or cotton blend. Cotton holds its shape, so the walls stand up and the points stay upright. Avoid soft acrylic, because the baskets will slump. These amounts assume 100 g = 170 m (186 yd).
Yarn: Sage Green
- Baskets: 3 × 60 g (102 m) = 180 g (306 m)
- Straps: 2 × 10 g (17 m) = 20 g (34 m)
- Sewing and joining: 10 g (17 m)
- Total: 210 g (357 m), so buy 3 skeins
These quantities already include a margin of about 15%.
Tools
- 4.5 mm (US 7) crochet hook
- Wooden ring, 2.75 in (7.0 cm) outer diameter
- Tapestry needle
- 4 stitch markers
- Measuring tape
- Spray bottle and rustproof pins for blocking
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- BLO – back loop only
- RS / WS – right side / wrong side
- sc2tog – single crochet 2 together: (insert hook in next st, yarn over, pull up a loop) 2 times, yarn over, draw through all 3 loops.
- sc3tog – single crochet 3 together: same as sc2tog, but pull up a loop in each of 3 sts and draw through all 4 loops.
- rev sc (reverse single crochet / crab stitch) – work sc from left to right (right to left if you crochet left-handed): insert hook in the next st to the right, pull up a loop, yarn over, draw through both loops.
Gauge and Checkpoints
Gauge: 16 sc × 16 rounds = 4 in (10.2 cm), worked firmly in the round.
That gives 4 sts and 4 rounds per 1 in (2.5 cm). At this gauge, single crochet stitches and rows are nearly square, which matters for the border.
Make one complete basket first and check it at every checkpoint before you start the second.
- After Rnd 10: base measures 5.75 in × 5 in (14.6 cm × 12.7 cm), with a 16.5 in (41.9 cm) perimeter.
- After Rnd 18: wall measures 2.25 in (5.7 cm) tall.
- After point Row 14: point stands 3.5 in (8.9 cm) above Rnd 18.
- After border: side height is 2.5 in (6.4 cm) and total back height is 6 in (15.2 cm).
If the base is too big, change to a 4 mm (US G-6) hook. If it is too small, or a toilet roll won’t fit, change to a 5 mm (US H-8) hook. Don’t add rounds, because the arch round needs exactly 66 stitches.

Basket (Make 3)
Base
Ch 6.
Rnd 1: 3 sc in 2nd ch from hook, sc in next 3 ch, 3 sc in last ch. Rotate the work and continue along the underside of the foundation chain: sc in next 3 ch. Don’t join. Work in a spiral, moving a marker up each round. (12 sts: 3 at each end, 3 along each straight side)
From here on, each round adds 3 increases at each curved end. The 3 stitches on each straight side stay the same.
Rnd 2: [2 sc in each of next 3 sts, sc in next 3 sts] 2 times. (18 sts)
Rnd 3: [(sc in next st, 2 sc in next st) 3 times, sc in next 3 sts] 2 times. (24 sts)
Rnds 4–10: For round number n, work [(sc in next n − 2 sts, 2 sc in next st) 3 times, sc in next 3 sts] 2 times.
- Rnd 4: 30 sts
- Rnd 5: 36 sts
- Rnd 6: 42 sts
- Rnd 7: 48 sts
- Rnd 8: 54 sts
- Rnd 9: 60 sts
- Rnd 10: 66 sts (30 at each curved end + 3 on each straight side)
Sl st in the next st to smooth out the step. Check the base against the checkpoint.
Wall
Rnd 11 (turning round): Ch 1, sc in BLO of each st around, then join with a sl st in the first sc. (66 sc worked 1 per st + 0 added = 66 sts) The unused front loops make a crisp ridge where the wall turns up.
Rnds 12–13: Ch 1, sc in each st around, then join. (66 sts)
Rnd 14 (first arches): Ch 1, sc in next st, ch 3, sk 2 sts; rep from * 21 more times, then join with a sl st in the first sc. (22 sc + 22 ch-3 loops)*
Rnd 15 (second arches): Sl st in first ch-3 loop, ch 1, sc in same loop, ch 3, sc in next ch-3 loop, ch 3; rep from * around, then join. (22 sc + 22 ch-3 loops)* These arches sit offset from the first tier, which creates the scalloped look.
Rnd 16 (conversion round): Sl st in first ch-3 loop, ch 1, 3 sc in each ch-3 loop around, then join. (22 loops × 3 sc = 66 sts; the 22 sc of Rnd 15 are skipped)
Rnds 17–18: Ch 1, sc in each st around, then join. (66 sts) Fasten off.
The wall now measures 2.25 in (5.7 cm).
Back Point
Flatten the basket so the two straight sides of the base are at the front and back, and choose one to be the back. Place a marker in the Rnd 18 st directly above the middle of that straight side. Count 13 sts to the right and 13 to the left, and mark both outer sts. (13 + 1 + 13 = 27 sts for the point; 39 sts remain for the front rim)
With RS facing, join yarn in the first marked outer st.
Row 1 (RS): Ch 1, sc in each of the 27 marked sts, then turn. (27 sts)
Rows 2–3: Ch 1, sc2tog, sc to last 2 sts, sc2tog, then turn. (Row 2: 25 sts; Row 3: 23 sts)
Row 4 (eyelet row): Ch 1, sc2tog, sc in next st, ch 1, sk 1, sc in next st; rep from * 8 more times, sc2tog, then turn. (1 + 1 + 9 sc + 9 ch-1 + 1 = 21 sts; each ch-1 sp counts as a st)*
Rows 5–6: Repeat Row 2. (Row 5: 19 sts; Row 6: 17 sts)
Row 7 (eyelet row): Ch 1, sc2tog, sc in next st, ch 1, sk 1, sc in next st; rep from * 5 more times, sc2tog, then turn. (15 sts)*
Rows 8–9: Repeat Row 2. (Row 8: 13 sts; Row 9: 11 sts)
Row 10 (eyelet row): Ch 1, sc2tog, sc in next st, ch 1, sk 1, sc in next st; rep from * 2 more times, sc2tog, then turn. (9 sts)*
Rows 11–13: Repeat Row 2. (Row 11: 7 sts; Row 12: 5 sts; Row 13: 3 sts)
Row 14: Ch 1, sc3tog, then turn. (1 st) Don’t fasten off.
The finished point is 14 rows, or 3.5 in (8.9 cm), tall.
Border (Each Basket)
Border gauge: 4 sc per 1 in (2.5 cm) along the rim, and 1 sc per row-end along the point. At this gauge, 4 rows also equal 1 in (2.5 cm), so 1 sc per row-end lies flat.
Border Rnd 1: Ch 1. Work 3 sc in the Row 14 st (the tip). Work 13 sc down the side of the point (1 sc in each row-end, Rows 13 to 1). Work 1 sc in each of the 39 front rim sts. Work 13 sc up the other side of the point (1 sc in each row-end, Rows 1 to 13). Join with a sl st in the first sc. (39 sc worked 1 per st + 26 row-end sts + 3 tip sts = 68 sts)
Count per section: tip 3, first point side 13, front rim 39, second point side 13.
Border Rnd 2: Ch 1, rev sc in each st around, then join. (68 sts) Fasten off and weave in the ends.
Why the math works: The rim keeps its 39 sts one-to-one, so the front opening doesn’t flare. Each side of the point has 13 row-ends, and with stitches and rows at a 1:1 ratio, 13 sc match the edge length exactly. The 3 sc at the tip turn the corner without cupping. Rev sc adds no stitches, so Rnd 2 also has 68 sts.
Check that the side height is 2.5 in (6.4 cm) and the back height is 6 in (15.2 cm).
Strap (Make 2)
Ch 97.
Row 1: Sc in 2nd ch from hook and in each ch across, then turn. (96 sts)
Row 2: Ch 1, sc in each st across. (96 sts) Fasten off, leaving a 24 in (61.0 cm) tail for sewing.
Each strap should measure 24 in × 0.5 in (61.0 cm × 1.3 cm). Number the stitches 1 to 96 from one end and mark these sections:
- Sts 1–8: ring wrap, 2 in (5.1 cm)
- Sts 33–42: Basket 1
- Sts 59–68: Basket 2
- Sts 85–94: Basket 3
Make All Pieces
All pieces use Sage Green:
- 3 baskets, about 60 g (102 m) each
- 2 straps, about 10 g (17 m) each
Layout (measured along each strap from the top end):
[ RING ]
/ \
sts 1-16 ring wrap (sts 1-8 folded onto 9-16)
sts 17-32 free strap ........ 4 in (10.2 cm)
| sts 33-42 BASKET 1 2.5 in (6.4 cm) |
| sts 43-58 gap ...... 4 in (10.2 cm) |
| sts 59-68 BASKET 2 2.5 in (6.4 cm) |
| sts 69-84 gap ...... 4 in (10.2 cm) |
| sts 85-94 BASKET 3 2.5 in (6.4 cm) |
sts 95-96 tucked under Basket 3 base
Joining
Ring: Fold sts 1–8 of one strap over the ring and lay them flat against sts 9–16 on the WS. Whipstitch through both layers, sewing st 1 to st 16, st 2 to st 15, and so on. Repeat with the second strap on the opposite side of the ring, keeping the RS of both straps facing out.
Baskets: Each basket attaches at the midpoints of its two curved ends, which are its widest points. Each midpoint sits 3 sts in front of the edge of the point. Pin a strap vertically over each midpoint, with the first stitch of the basket section level with the top of Border Rnd 2.
Stitch-to-stitch logic: The side of each basket has 10 rounds, from Rnd 11 through Border Rnd 2. That matches the 10 strap stitches in each basket section. Whipstitch 1 strap st to 1 wall round, working from top to bottom. Then stitch the last 2 sts of each strap (sts 95–96) flat under the base of Basket 3.
Tension: Pull each whipstitch just snug, so the yarn sinks in without dimpling the wall. If you pull too tight, you’ll pinch the arches closed.
Size checkpoint: Hang the holder from the ring. It should measure about 24 in (61.0 cm) from the top of the ring to the base of Basket 3. Each point should sit about 0.25 in (0.6 cm) below the base of the basket above it.
Final Blocking
- Put a toilet roll wrapped in a plastic bag in each basket and fill any gaps with a small towel.
- Spray the baskets evenly until they’re damp but not dripping.
- Shape the oval bases flat and the walls straight. Gently open each arch with your fingertips.
- Stand each point upright and pin its tip to a rolled towel behind the basket. Press the eyelets open.
- Lay the straps flat and pin them to 24 in (61.0 cm) without stretching.
- Let everything dry completely, about 24 hours, before hanging.
Final Quality-Control Checklist
- Each base measures 5.75 in × 5 in (14.6 cm × 12.7 cm), and Rnd 10 has 66 sts.
- Rnds 14 and 15 each have 22 loops.
- Point rows decrease from 27 sts to 1, with eyelets on Rows 4, 7, and 10.
- Each border has 68 sts: 3 at the tip, 13 on each point side, 39 on the front rim.
- All three baskets match within 0.25 in (0.6 cm).
- Each strap measures 24 in (61.0 cm) and has 96 sts.
- The baskets hang level, with the straps at their widest points.
- All ends are woven in securely.
Troubleshooting
- Base cups upward: Your increases are too tight. Loosen your tension or go up a hook size.
- Base ruffles: The increases have drifted out of place. Recount to 66 sts at Rnd 10 and keep 3 straight sts on each side.
- Arches don’t line up: Rnd 14 must start with exactly 66 sts. Rework Rnds 11–13 if your count is off.
- Point leans or twists: Check that it’s centered (13 + 1 + 13) and block it upright.
- Point border ruffles: You worked more than 1 sc per row-end. Rework with 13 sc on each side.
- Basket tilts forward: The straps are sewn too far back. Move them to the true midpoints of the curved ends.
Care
Hand wash in cool water, then reshape and dry each basket over a wrapped roll. Don’t tumble dry.

Final Notes
The measurement chain is simple. A 66-stitch base at 4 sts per inch gives a 16.5 in (41.9 cm) perimeter. Those 66 sts carry straight up the wall, divide evenly into 22 arches, and return to 66. Next, 27 of them form the 3.5 in (8.9 cm) point. The 39 front sts, 26 row-ends, and 3 tip sts then make a 68-stitch border. Finally, the 96-stitch straps space the 2.5 in (6.4 cm) baskets exactly 4 in (10.2 cm) apart. Check your gauge once and measure at every checkpoint, and the three tiers will hang straight and even.
Happy crocheting!