This door curtain is made from six long lace strips that hang separately from a rod. Each strip has a column of open diamonds outlined in thick double crochet lines. A small fan sits at each point where the diamonds cross, and a six-petal flower is sewn into the middle of every diamond.
The strips alternate between soft lilac and cream. The lilac strips have cream fans and flowers, and the cream strips have lilac ones. Every flower center is worked in the strip’s main color, so the two colors tie together. Because the strips aren’t joined, the curtain moves easily and you can push one strip aside to walk through.
The pattern uses US crochet terms. Each finished strip measures 5.75 in (14.6 cm) wide by 74.5 in (189.2 cm) long, plus a 2 in (5.1 cm) hanging loop. Six strips placed edge to edge span 34.5 in (87.6 cm).
Here’s how it’s built. You work each strip flat in rows from the bottom up, using a 19-position grid of double crochet and chains. Next you add the contrast fans and work a two-round single crochet border with a hanging loop. Finally, you make the flowers and sew them into the diamonds.
Finished Size and Construction
- Finished strip size: 5.75 × 74.5 in (14.6 × 189.2 cm), plus a 2 in (5.1 cm) loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 5 mm (H-8)
- Number of pieces: 6 strips, plus 72 flower appliqués (12 per strip)
- Layout: 6 strips hung side by side from one rod, alternating lilac and cream, not joined
- Strip size before border: 4.75 × 73.5 in (12.1 × 186.7 cm)
- Border depth: 0.5 in (1.3 cm) on every side
- Diamonds per strip: 12, each 6 in (15.2 cm) tall
Materials
Yarn: Use a smooth worsted-weight cotton or cotton blend with about 170 m per 100 g. Cotton keeps the strips from stretching under their own weight and shows the lattice clearly. Avoid fuzzy yarns, because they blur the diamond lines.
- Lilac: 800 g (approx. 1,360 m). This is the main color for 3 strips and the accent color for the other 3.
- Cream: 800 g (approx. 1,360 m). This is the main color for 3 strips and the accent color for the other 3.
These quantities include a margin of about 10% for gauge differences and swatching. Buy all of each color from one dye lot.
Tools:
- 5 mm (H-8) crochet hook
- Tapestry needle
- Stitch markers
- Measuring tape, at least 80 in (203.2 cm) long
- Rust-proof pins and a long blocking surface
- Spray bottle
- Curtain rod up to 1.25 in (3.2 cm) in diameter
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- sp: space
- st(s): stitch(es)
- RS / WS: right side / wrong side
- MC: main color of the strip
- CC: contrast color of the strip
Special stitch: Fan. Work (ch 3, 4 dc) into one space. That makes 5 sts, with the ch-3 counting as the first dc.
The position rule. Every body row covers exactly 19 positions. Where the pattern says “dc,” work a dc into the stitch or chain directly below. Where it says “ch,” chain that number and skip the same number of positions below. A beginning ch 3 always counts as a dc. Work the last dc of each row into the top of the turning chain.
Gauge and Checkpoints
Gauge: 16 dc and 8 rows = 4 in (10.2 cm) in solid dc. Each dc is 0.25 in (0.6 cm) wide and each row is 0.5 in (1.3 cm) tall.
Test one piece first. Work Rows 1–14 below as a swatch. That gives you one full diamond.
- Width across 19 positions: 4.75 in (12.1 cm)
- Height after Row 2: 1 in (2.5 cm)
- Height after Row 14: 7 in (17.8 cm)
If your swatch is too wide or too tall, go down a half size in hook. If it’s too small, go up a half size. Keep your chains at the same tension as your dc, because tight chains make the diamonds pucker.
Checkpoints during the strip:
- After Row 74 (6 repeats): 37 in (94.0 cm)
- After Row 147 (body complete): 73.5 in (186.7 cm)
- After the border: 5.75 × 74.5 in (14.6 × 189.2 cm)
Measure flat on a table, without stretching.

The Strip Body (make 6: 3 in lilac, 3 in cream)
Each row has 2 side-bar dc at each edge (positions 1–2 and 18–19). The 15 center positions (3–17) make up the lattice.
Foundation: With MC, ch 21.
Row 1 (RS): Dc in 4th ch from hook and in each ch across. Turn. (19 dc)
Row 2 (waist row): Ch 3, dc in next st, ch 4, dc in next 3 positions, ch 1, dc in next 3 positions, ch 4, dc in last 2 sts. Turn. (10 dc + 9 ch = 19 positions)
A fan goes into the center ch-1 of every waist row later on.
Diamond Repeat (Rows 3–14)
Each lattice row below has 8 dc + 11 ch = 19 positions. The two 2-dc blocks move 1 position outward per row through Row 8, then move back inward 1 position per row.
Row 3: Ch 3, dc in next st, ch 5, dc in next 2, ch 1, dc in next 2, ch 5, dc in last 2. Turn.
Row 4: Ch 3, dc in next st, ch 4, dc in next 2, ch 3, dc in next 2, ch 4, dc in last 2. Turn.
Row 5: Ch 3, dc in next st, ch 3, dc in next 2, ch 5, dc in next 2, ch 3, dc in last 2. Turn.
Row 6: Ch 3, dc in next st, ch 2, dc in next 2, ch 7, dc in next 2, ch 2, dc in last 2. Turn.
Row 7: Ch 3, dc in next st, ch 1, dc in next 2, ch 9, dc in next 2, ch 1, dc in last 2. Turn.
Row 8 (widest row): Ch 3, dc in next 3 positions, ch 11, dc in last 4 positions. Turn. (8 dc + 11 ch) The diamond lines meet the side bars here.
Row 9: Repeat Row 7.
Row 10: Repeat Row 6.
Row 11: Repeat Row 5.
Row 12: Repeat Row 4.
Row 13: Repeat Row 3.
Row 14 (waist row): Repeat Row 2. (10 dc + 9 ch)
Rows 3–14 make one diamond, 12 rows or 6 in (15.2 cm) tall. The 3-dc blocks of each waist row form the X where the lines cross.
Rows 15–146: Repeat Rows 3–14 eleven more times, for 12 diamonds in total. Row 146 is a waist row.
Row 147 (top row): Ch 3, dc in each st and each ch across. (19 dc) Don’t fasten off.
The strip now measures 4.75 × 73.5 in (12.1 × 186.7 cm). In total it has 147 rows, 12 diamonds, and 13 waist rows.
Border and Hanging Loop
Border gauge: 4 sc = 1 in (2.5 cm) along every edge. Each border round adds 0.25 in (0.6 cm) per side.
Round 1: Ch 1 and work 3 sc in the last dc of Row 147 for the corner. Rotate the strip:
- Along the long side, work 2 sc in each row end (147 rows = 294 sc).
- Along the bottom, work 3 sc in the first foundation ch, sc in the next 17 ch, and 3 sc in the last ch.
- Along the second long side, work 294 sc.
- Across the top, work 3 sc in the first st of Row 147 and sc in the next 17 sts.
- Sl st to the first sc.
Count: 23 + 294 + 23 + 294 = 634 sc. With both corner sts included, that’s 21 per short side and 298 per long side.
Round 2: Ch 1, sc in each st around, with 3 sc in each center corner sc. Sl st to the first sc. (642 sc: 23 per short side and 300 per long side, corners included)
Hanging loop: Don’t fasten off. Sl st along the top edge to the 12th of its 23 sc, which is the center. Ch 16 and sl st in the same sc. Work 22 sc into the loop and sl st to the base, then fasten off. The loop hangs about 2 in (5.1 cm) tall.
Why the math works: The dc rows are 0.5 in (1.3 cm) tall, and 2 sc cover 0.5 in at 4 sc per inch, so the sides lie flat. The 19 sts across the top and bottom match the 19-position body. The 3-sc corners add exactly 2 sts per corner each round, so the corners stay square without ruffling.
Contrast Fans (13 per strip)
With the RS facing, join CC with a sl st in the center ch-1 sp of a waist row. The waist rows are Row 2, Row 14, and every 12th row after that. Work a Fan, then fasten off, leaving a 4 in (10.2 cm) tail. Each fan is about 1 in (2.5 cm) wide and opens upward into the diamond tip.
Repeat in all 13 waist rows. Weave the tails in through the dc blocks of the waist row.
Flowers (make 12 per strip: 72 total)
Each flower uses both colors. Work the center in the strip’s MC and the petals in its CC.
Round 1 (MC): In a magic ring, work 6 sc. Pull the ring closed, sl st to the first sc, and fasten off. (6 sc)
Round 2 (CC): Join in any sc. In each sc, work (sl st, ch 3, 2 dc, ch 3, sl st). Join and fasten off, leaving a 10 in (25.4 cm) tail. (6 petals)
Each flower measures 2 in (5.1 cm) across.
- For the lilac strips: 36 flowers with lilac centers and cream petals
- For the cream strips: 36 flowers with cream centers and lilac petals
Attaching: Center one flower in each diamond, level with that diamond’s widest row (Rows 8, 20, 32, and so on). The opening there is 11 positions, or 2.75 in (7.0 cm) wide, so the flower fits with a small gap. Using the CC tail, tack each petal tip to the chain bar or dc line beneath it with 2 small stitches. Stitch through the chains only, so nothing shows on the back.
Hanging the Strips
The strips are not joined. Slide them onto the rod by their loops in this order: lilac, cream, lilac, cream, lilac, cream. On a 36 in (91.4 cm) opening, the six 5.75 in (14.6 cm) strips leave about 0.3 in (0.8 cm) between neighbors. Space them evenly so the side borders hang straight and parallel.
Final Blocking
- Weave in all remaining ends before blocking.
- Pin one strip RS up to a long surface, at 5.75 in (14.6 cm) wide.
- Pin the length to 74.5 in (189.2 cm), with a pin every 6 in (15.2 cm) at each waist row.
- Use pins to open each diamond into a clean, symmetrical point at the top and bottom.
- Spread each fan into a half circle and flatten the flower petals.
- Mist evenly until damp, and let the strip dry completely.
- Repeat for all 6 strips, then compare their lengths side by side.
Final Quality-Control Checklist
- Each strip has 147 rows and 12 diamonds.
- Every lattice row counts 19 positions (8 dc + 11 ch).
- Every waist row counts 19 positions (10 dc + 9 ch).
- Border Round 2 totals 642 sc.
- All 6 strips measure 5.75 × 74.5 in (14.6 × 189.2 cm).
- Each strip has 13 fans and 12 flowers, all on the RS.
- The hanging loops sit at the exact top center.
- The strips alternate lilac and cream on the rod.
Troubleshooting
The diamonds look lopsided. A block moved 2 positions instead of 1. Count the ch before each block against the numbers for that row.
The strip narrows or flares. Your chain tension doesn’t match your dc tension. Adjust it, or use a half-size larger hook for the chains only.
The border ripples. You worked more than 2 sc per row end. Rip back and keep each long side to exactly 294 sc.
The border pulls the edges in. Your sc tension is too tight. Go up a half size in hook for the border only.
The strips are different lengths. Re-block the short strips with a little extra stretch, pinning at each waist row.
The flowers cup. Steam-block them flat before sewing them on, and keep your tacking stitches loose.
Care
Hand wash in cool water, roll in a towel to remove moisture, and dry flat. Re-pin to 5.75 × 74.5 in (14.6 × 189.2 cm) if needed.

Final Notes
Here is the measurement chain:
- A gauge of 4 dc = 1 in (2.5 cm) gives a 19-position body 4.75 in (12.1 cm) wide.
- Each 12-row diamond is 6 in (15.2 cm) tall, and 147 rows make 73.5 in (186.7 cm).
- The two-round border adds 0.5 in (1.3 cm) per side, for 5.75 × 74.5 in (14.6 × 189.2 cm).
- Six strips span 34.5 in (87.6 cm).
Check your swatch and count every row, and the curtain will hang straight and even.
Happy crocheting!