Peach Seashell Three-Tier Hanging Basket Crochet Pattern

This three-tier hanging basket is a soft, practical bathroom organizer. Three oval baskets hang one above the other on two flat straps, and each basket holds a standard toilet roll upright. Above the top basket the straps meet in a point that slips over a wall peg or hook.

The baskets are worked in a warm peach cotton with creamy off-white trim. Every rim gets a two-round cream band finished with neat picot bumps. Small seashell-style fans sit low on the walls, giving the piece a gentle coastal look.

The pattern uses US crochet terms. The finished holder is about 24 in (61.0 cm) tall from peak to bottom. Each basket measures about 7.9 in (20.1 cm) long, 5.5 in (14.0 cm) wide and 3.25 in (8.3 cm) tall.

Construction is simple. You crochet an oval base, turn up a straight wall through the back loops, add the cream rim, then sew on six fan appliqués. Two flat straps are sewn to the narrow ends of all three baskets and joined at the top.

Finished Size and Construction

  • Finished size: about 24 in (61.0 cm) tall, 8 in (20.3 cm) wide
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 3 baskets, 2 straps, 18 fan appliqués
  • Layout: 3 baskets stacked vertically, 1 basket per tier
  • Piece size (one basket): base 7.9 x 5.5 in (20.1 x 14.0 cm), wall 3.25 in (8.3 cm) tall
  • Size before border: wall 2.75 in (7.0 cm) tall
  • Border depth: 0.5 in (1.3 cm), plus picot bumps
  • Strap: 94 sts long, about 25 in (63.5 cm) x 0.5 in (1.3 cm)

Materials

Choose a firm, smooth worsted-weight yarn in 100% cotton or a cotton blend. Cotton holds its shape well and handles humid bathrooms. Avoid fuzzy or very stretchy yarns, because the baskets need to stand on their own.

  • Peach (main color, MC): about 150 g / 240 m
  • Cream (contrast color, CC): about 60 g / 96 m

These quantities include a margin of roughly 30–50% for gauge swatches, sewing tails and small differences in tension.

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • 4 stitch markers
  • Scissors
  • Measuring tape
  • Rust-proof pins and a blocking surface
  • Optional: a wall peg or hook for hanging

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • st(s) – stitch(es)
  • MC / CC – main color / contrast color

Special stitches:

  • Picot: ch 3, sl st in 3rd ch from hook.
  • Petal: sl st in next st, ch 6, dc in 3rd ch from hook, hdc in next ch, sc in next 2 ch, sl st in same st as the first sl st.

Gauge and Checkpoints

Gauge: 15 sc and 16 rounds = 4 in (10.2 cm) in sc, worked firmly. That is 3.75 sts per inch and 4 rounds per inch, so each round is 0.25 in (0.6 cm) tall.

Make one complete basket and measure it before you start the other two. All three baskets must match, or the tiers will hang crooked.

Checkpoints:

  • After Rnd 6: the base is 3.0 in (7.6 cm) wide and 5.4 in (13.7 cm) long.
  • After Rnd 11: the base is 5.5 in (14.0 cm) wide and 7.9 in (20.1 cm) long.
  • After Rnd 22: the wall is 2.75 in (7.0 cm) tall.
  • After Rnd 24: the wall is 3.25 in (8.3 cm) tall, not counting picots.

If your base is too big, go down a hook size (4.5 mm). If it is too small, go up to 5.5 mm. Don’t add or remove rounds to fix the size, because the rim and fan spacing depend on exactly 84 sts.

If the base ruffles, your tension is too loose for the increases. If it cups before Rnd 12, your tension is too tight. A half hook size change usually fixes either problem.

Closeup of orange crocheted fabric with cream embroidered flowers and trim on neutral surface.

Basket (Make 3)

The base is an oval with two straight sides of 9 sts and two curved ends. Each end gains 3 sts per round, so every round adds 6 sts in total. Work in joined rounds: join with a sl st to the first st, then ch 1 (the ch 1 does not count as a st).

Base

With MC, ch 12.

Rnd 1: 3 sc in 2nd ch from hook, sc in next 9 ch, 3 sc in last ch. Rotate and work along the bottom loops of the chain: sc in next 9 ch. Join. (24 sts: end 3, side 9, end 3, side 9)

Rnd 2: Ch 1, [inc in each of next 3 sts, sc in next 9 sts] twice. Join. (30 sts)

Rnd 3: Ch 1, [(sc in next st, inc) 3 times, sc in next 9 sts] twice. Join. (36 sts)

Rnd 4: Ch 1, [(sc in next 2 sts, inc) 3 times, sc in next 9 sts] twice. Join. (42 sts)

Rnd 5: Ch 1, [(sc in next 3 sts, inc) 3 times, sc in next 9 sts] twice. Join. (48 sts)

Rnd 6: Ch 1, [(sc in next 4 sts, inc) 3 times, sc in next 9 sts] twice. Join. (54 sts)

Checkpoint: 3.0 x 5.4 in (7.6 x 13.7 cm).

Rnd 7: Ch 1, [(sc in next 5 sts, inc) 3 times, sc in next 9 sts] twice. Join. (60 sts)

Rnd 8: Ch 1, [(sc in next 6 sts, inc) 3 times, sc in next 9 sts] twice. Join. (66 sts)

Rnd 9: Ch 1, [(sc in next 7 sts, inc) 3 times, sc in next 9 sts] twice. Join. (72 sts)

Rnd 10: Ch 1, [(sc in next 8 sts, inc) 3 times, sc in next 9 sts] twice. Join. (78 sts)

Rnd 11: Ch 1, [(sc in next 9 sts, inc) 3 times, sc in next 9 sts] twice. Join. (84 sts: end 33, side 9, end 33, side 9)

Checkpoint: 5.5 x 7.9 in (14.0 x 20.1 cm). The base must lie flat.

Wall

Rnd 12: Ch 1, sc in BLO of each st around. Join. (84 sts) This makes the crisp ridge where the base turns up.

Rnds 13–22: Ch 1, sc in each st around. Join. (84 sts each round) Change to CC in the final join of Rnd 22, then fasten off MC.

Checkpoint: the wall is 2.75 in (7.0 cm) tall, measured from the ridge.

Now place markers in the wall, counting from the first st of the round. Sts 1–33 are end 1, sts 34–42 are side A, sts 43–75 are end 2, and sts 76–84 are side B. Mark st 17 and st 59, which are the centers of the two ends where the straps go.

Fan Appliqué (Make 18)

Each fan is a small solid half-circle with seven petals.

With CC, make a magic ring.

Row 1: Ch 2 (does not count as a st), 7 hdc in ring. Pull the ring closed only until the hdc form a flat half-circle with a straight bottom edge. Turn. (7 hdc)

Row 2: Work 1 petal in each hdc across. (7 petals)

Fasten off, leaving a 12 in (30.5 cm) tail for sewing. Weave the starting tail into the half-circle.

Each fan measures about 2.75 in (7.0 cm) wide and 1.5 in (3.8 cm) tall. Each petal is about 1 in (2.5 cm) long.

Placing the Fans

Sew the fans on after the rim (see Border). Each basket gets 6 fans, spaced every 14 sts (84 ÷ 6 = 14). Center the fans over wall sts 10, 24, 38, 52, 66 and 80. The fans at sts 38 and 80 sit at the centers of the long sides, and the other four sit on the curves.

Line up the straight bottom edge of each fan with Rnd 13, just above the ridge. Whipstitch around the half-circle, then tack each petal tip with one small stitch so the petals stay flat.

Each fan covers about 10 sts, which leaves clear wall on both sides of the straps at sts 17 and 59.

Make All Pieces

Peach (MC): 3 basket bodies (Rnds 1–22) and 2 straps.
Cream (CC): 3 rims (Rnds 23–24) and 18 fans.

Layout (front view):

        /\
       /  \      strap legs meet at peak
      /    \
   [ Basket 1 ]  top tier
   |          |  gap 3.2 in (8.1 cm)
   [ Basket 2 ]  middle tier
   |          |  gap 3.2 in (8.1 cm)
   [ Basket 3 ]  bottom tier

Strap (Make 2)

With MC, ch 95.

Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (94 sc)

Row 2: Ch 1, sl st in each sc across. (94 sl sts) Fasten off.

Each strap measures about 25 in (63.5 cm) long and 0.5 in (1.3 cm) wide. Mark these zones along each strap:

  • Sts 1–12: bottom basket, 3.2 in (8.1 cm)
  • Sts 13–24: gap
  • Sts 25–36: middle basket
  • Sts 37–48: gap
  • Sts 49–60: top basket
  • Sts 61–94: hanging leg, 9.1 in (23.1 cm)

Border

The border is the cream rim. Work it on each basket right after Rnd 22, before you sew on the fans.

Border gauge: the same as the body, 3.75 sts per inch and 4 rounds per inch.

Rnd 23: With CC, ch 1, sc in each st around. Join. (84 sts: end 33, side 9, end 33, side 9)

Rnd 24: Ch 1, [sc in next st, picot, sc in next 2 sts] 28 times. Join. Fasten off. (84 sc + 28 picots)

Per section, that gives 11 picots on end 1, 3 on side A, 11 on end 2 and 3 on side B.

Why the math works: each repeat uses 3 sts, and every section is a multiple of 3 (33 = 3 x 11, 9 = 3 x 3). The picots therefore land in the same spots on every end and side, with no partial repeat at the join. The picots sit on sts 1, 4, 7 and so on, which leaves sts 17–18 and 59–60 free between picots for the straps.

The rim adds 2 rounds, or 0.5 in (1.3 cm), bringing the wall to 3.25 in (8.3 cm).

Joining

Join the straps after all three baskets have their rims and fans.

Method: whipstitch with MC, sewing both long edges of the strap to the outside of the wall.

Stitch-to-stitch logic: lay one strap vertically over wall sts 17–18 and the second strap over sts 59–60. Strap st 1 sits on Rnd 12 (the ridge) and strap st 12 sits on Rnd 24 (the rim). The wall has 13 rounds and the strap section has 12 sts, both about 3.2–3.25 in (8.1–8.3 cm) long. Sew 1 strap st to each round, and take up the extra round with the final stitch at the rim.

  1. Sew strap sts 1–12 to the bottom basket.
  2. Leave sts 13–24 free.
  3. Sew sts 25–36 to the middle basket.
  4. Leave sts 37–48 free.
  5. Sew sts 49–60 to the top basket.
  6. Bring the st 94 ends of both straps together above the top basket and whipstitch the short ends to each other to form the peak. Stitch through twice for strength.

Tension: sew snugly without puckering the wall. Each sewing stitch should hold the strap flat against the basket without bunching the rounds.

Size checkpoint: from the bottom of the lowest basket to the rim of the top basket should be 16 in (40.6 cm). Hang the holder by the peak; the total height should be about 24 in (61.0 cm). The two gaps should match within 0.25 in (0.6 cm).

Final Blocking

  1. Lightly dampen each basket with a spray bottle. Don’t soak the sewn assembly.
  2. Stuff each basket firmly with a towel, or set a toilet roll inside, to keep the walls straight.
  3. Pin the fan petals flat against the wall if any of them curl.
  4. Lay the straps straight and pin them to the blocking surface.
  5. Let everything dry completely, for at least 24 hours.
  6. Remove the pins and hang the holder to check that the baskets sit level.

Final Quality-Control Checklist

  • All three bases measure 5.5 x 7.9 in (14.0 x 20.1 cm).
  • Every basket has 84 sts in Rnds 11–23.
  • The BLO ridge is crisp and even all around.
  • Each rim has 28 picots: 11 per end and 3 per side.
  • Each basket has six fans, centered on sts 10, 24, 38, 52, 66 and 80.
  • The straps cover sts 17–18 and 59–60 on every basket.
  • Both gaps are 3.2 in (8.1 cm).
  • The peak join is secure and all tails are woven in.

Troubleshooting

  • Base ruffles: tension is too loose; go down a hook size.
  • Base cups early: tension is too tight; go up a hook size.
  • Walls lean outward: check that Rnd 12 is worked in BLO, and keep Rnds 13–22 firm.
  • Picots miss the strap gap: recount Rnd 24 from the first st of the round. You must have exactly 84 sts.
  • Fans curl: steam them lightly and tack each petal tip.
  • Baskets tilt when hung: check that both straps use the same stitch zones, and resew if one is off by a stitch.
  • Peak seam twists: whipstitch the ends flat, edge to edge.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat with the baskets reshaped. Don’t hang the holder to dry while it is wet.

Crocheted toilet paper holder with three tiers holding white rolls, hung on bathroom wall with orange yarn and daisy details.

Final Notes

The measurement chain is short and reliable. A gauge of 15 sc and 16 rounds per 4 in (10.2 cm) gives a 5.5 x 7.9 in (14.0 x 20.1 cm) base at 84 sts. The ridge round and ten plain rounds make a 2.75 in (7.0 cm) wall, and the cream rim brings it to 3.25 in (8.3 cm). Two 94-st straps stack the baskets with 3.2 in (8.1 cm) gaps, for a finished holder about 24 in (61.0 cm) tall.

Check the base at Rnd 11 and the wall at Rnd 22 on every basket, and the tiers will hang level.

Happy crocheting!

Leave a Comment