Plum Lattice Ornament Bag Holder Crochet Pattern

This ornament-shaped bag holder turns a pile of plastic grocery bags into a festive kitchen accent. It hangs from a cabinet knob. You put bags in through the wide top and pull them out one at a time through the small opening at the tip.

The body is a rich plum, with a band of open diamond lattice across the widest part so the bags show through. Thin gold stripes sit near the tip and just below the neck. A cream top band with a row of puff stitches and a cream strap finish the piece, like the cap and hanger on a vintage glass ornament.

All instructions use US crochet terms. Laid flat, the finished holder is about 8.5 in (21.6 cm) wide at the widest point and about 11.75 in (29.8 cm) tall from tip to rim. With the strap it hangs about 16.25 in (41.3 cm) long.

Construction is simple. You work one seamless piece in joined rounds from the bottom opening up: a single crochet cone, a chain-mesh lattice band, a gently tapered shoulder, and a cream top border. You then work the strap in rows straight off the rim and sew it to the opposite side.

Finished Size and Construction

  • Finished size: 8.5 in (21.6 cm) wide flat at the widest point x 11.75 in (29.8 cm) tall, plus strap
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (US H-8)
  • Number of pieces: 1 body, with the strap worked directly off the rim
  • Layout: Single piece, worked bottom-up in joined rounds
  • Piece size: Widest circumference is 60 sts, about 17 in (43.2 cm)
  • Size before border: About 10.25 in (26.0 cm) tall, with a 48-st neck
  • Border depth: About 1.5 in (3.8 cm) of cream rounds at the top

Materials

Choose a smooth worsted-weight cotton or cotton blend. Cotton holds the cone shape and doesn’t stretch out when the holder is full. Acrylic also works, but the lattice will relax more.

  • Plum (main color): 120 g, about 220 m
  • Cream (top border and strap): 40 g, about 75 m
  • Gold metallic worsted: 10 g, about 25 m

All quantities include a margin of about 15 to 20 percent for your gauge test and differences in tension.

Tools:

  • 5.0 mm (US H-8) crochet hook
  • Stitch markers (at least 2)
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Spray bottle, plus a rolled towel or an inflated balloon for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together
  • sp – space
  • st(s) – stitch(es)
  • rnd(s) – round(s)

Puff stitch (puff): (Yarn over, insert hook in stitch, pull up a loop to the height of the round) 3 times. Then yarn over and pull through all 7 loops on the hook.

Round notes: Join every round with a sl st to the first sc. The ch 1 at the start of a round does not count as a stitch. Do not turn. Keep the joins stacked at the back of the holder.

Gauge and Checkpoints

Gauge: 14 sc and 15 rnds = 4 in (10.2 cm), worked in joined rounds.

Before you commit to the whole holder, test your gauge by working Rnds 1 to 9 and measuring. This short cone is the real gauge check because it shows how your tension behaves in the round. If it matches, just keep going.

Checkpoints:

  • After Rnd 4 (gold stripe): 24 sts, flat width about 3.4 in (8.6 cm)
  • After Rnd 20: 60 sts, flat width about 8.5 in (21.6 cm), height about 5.25 in (13.3 cm)
  • After Rnd 25: lattice band complete, height about 7.75 in (19.7 cm)
  • After Rnd 34: 48 sts, flat width about 6.75 in (17.1 cm), height about 10.25 in (26.0 cm)
  • After Rnd 39: height about 11.75 in (29.8 cm)

If your piece is too big, go down to a 4.5 mm (US 7) hook. If it is too small, go up to a 5.5 mm (US I-9) hook. The stitch counts never change; only the hook does.

Close-up of burgundy crocheted fabric with cream trim and gold metallic edging against a warm tan background.

Body: Bottom Cone

The bottom opening is a chain ring. Work into the chains themselves, not around the center, so the hole stays open for pulling bags through.

Foundation (plum): Ch 16, sl st in the first ch to form a ring. Take care not to twist the chain.

Rnd 1: Ch 1, sc in each ch around, join. (16 sts)

The opening measures about 1.5 in (3.8 cm) across.

Rnd 2: Ch 1, (sc in next 3 sts, inc) 4 times, join. (20 sts)

Rnd 3: Ch 1, (sc in next 4 sts, inc) 4 times, join. Fasten off plum. (24 sts)

Rnd 4 (gold): Join gold in any st. Ch 1, sc in each st around, join. Fasten off gold. (24 sts)

Rnd 5 (plum): Join plum. Ch 1, (sc in next 5 sts, inc) 4 times, join. (28 sts)

Rnd 6: Ch 1, (sc in next 6 sts, inc) 4 times, join. (32 sts)

Rnd 7: Ch 1, (sc in next 7 sts, inc) 4 times, join. (36 sts)

Rnd 8: Ch 1, (sc in next 8 sts, inc) 4 times, join. (40 sts)

Rnd 9: Ch 1, (sc in next 9 sts, inc) 4 times, join. (44 sts)

Rnd 10: Ch 1, sc in each st around, join. (44 sts)

Rnd 11: Ch 1, (sc in next 10 sts, inc) 4 times, join. (48 sts)

Rnd 12: Ch 1, sc in each st around, join. (48 sts)

Rnd 13: Ch 1, (sc in next 11 sts, inc) 4 times, join. (52 sts)

Rnd 14: Ch 1, sc in each st around, join. (52 sts)

Rnd 15: Ch 1, (sc in next 12 sts, inc) 4 times, join. (56 sts)

Rnd 16: Ch 1, sc in each st around, join. (56 sts)

Rnd 17: Ch 1, (sc in next 13 sts, inc) 4 times, join. (60 sts)

Rnds 18–20: Ch 1, sc in each st around, join. (60 sts)

Increasing every round in Rnds 2 to 9 makes the pointed tip. In Rnds 10 to 17, increases alternate with plain rounds, which rounds out the belly like an ornament. To stop the increases from stacking into a visible spiral, you can shift the starting point by 1 st every few rounds.

Body: Diamond Lattice Band

The lattice is a chain mesh. Each round of ch-5 loops is anchored in the center of the loops below it, which creates the diagonal diamond grid.

Rnd 21: Ch 1, sc in first st, ch 5, skip next 3 sts, sc in next st; repeat from * 14 times total. Skip the last 3 sts, then ch 2 and dc in the first sc. (15 sc, 15 ch-5 sps)

The ch 2 plus dc counts as the last loop and puts your hook at the center of that loop. 60 sts ÷ 4 sts per repeat = exactly 15 loops.

Rnds 22–23: Ch 5, sc in next ch-5 sp; repeat from * around, ending with ch 2, dc in top of the joining dc. (15 ch-5 sps)

Rnd 24: Ch 5, sc in next ch-5 sp; repeat from * around, ending with ch 5, sl st in the joining dc of Rnd 23. (15 ch-5 sps)

Rnd 25 (conversion round): Ch 1, work 4 sc in each ch-5 sp around, join. (15 sps x 4 sc = 60 sts)

Rnd 25 brings the count back to a full 60 sts, so the shoulder starts at the same width the belly ended.

Body: Shoulder and Neck

Rnds 26–27: Ch 1, sc in each st around, join. (60 sts)

Rnd 28: Ch 1, (sc in next 13 sts, sc2tog) 4 times, join. (56 sts)

Rnd 29: Ch 1, sc in each st around, join. (56 sts)

Rnd 30: Ch 1, (sc in next 12 sts, sc2tog) 4 times, join. (52 sts)

Rnd 31: Ch 1, sc in each st around, join. (52 sts)

Rnd 32: Ch 1, (sc in next 11 sts, sc2tog) 4 times, join. (48 sts)

Rnd 33: Ch 1, sc in each st around, join. Fasten off plum. (48 sts)

Rnd 34 (gold): Join gold. Ch 1, sc in each st around, join. Fasten off gold. (48 sts)

Check now that the height is 10.25 in (26.0 cm) and the neck is 6.75 in (17.1 cm) wide laid flat.

Top Border

The cream border forms the cap of the ornament and keeps the opening firm.

Border gauge: Same as the body, 14 sc = 4 in (10.2 cm). The border has no increases, so the neck stays at 48 sts. Think of each round as 4 quarters of 12 sts.

Rnd 35 (cream): Join cream. Ch 1, sc in each st around, join. (48 sts; 12 per quarter)

Rnd 36 (puff round): Ch 2 (does not count), puff in next st, ch 1, skip next st; repeat from * around, join to top of first puff. (24 puffs and 24 ch-1 sps; 6 puffs per quarter)

Rnd 37 (conversion round): Ch 1, sc in each puff and in each ch-1 sp around, join. (24 sc in puffs + 24 sc in sps = 48 sts; 12 per quarter)

Rnds 38–39: Ch 1, sc in each st around, join. (48 sts; 12 per quarter)

Do not fasten off.

Why the math works: The puff repeat uses 2 sts, and 48 divides evenly by 2, so you get 24 puffs with no partial repeat at the join. Rnd 37 puts 1 sc back into every puff and every ch-1 sp, which returns exactly 48 sts. Because 48 also divides by 4, each quarter holds exactly 12 sts, which places the two strap ends exactly opposite each other.

Strap

You work the strap in rows straight off the rim, using the cream still on your hook.

Row 1: Ch 1, sc in the next 4 sts of Rnd 39 (sts 1 to 4). Turn. (4 sts)

Rows 2–38: Ch 1, sc in each st across. Turn. (4 sts)

The strap is about 10 in (25.4 cm) long and about 1.1 in (2.8 cm) wide. Fasten off, leaving a 12 in (30.5 cm) tail.

From the end of Row 1, skip the next 20 sts on the rim (sts 5 to 24). Sew the last row of the strap to sts 25 to 28 of Rnd 39. That leaves 20 free sts on each side: 4 + 20 + 4 + 20 = 48. Make sure the strap isn’t twisted, and whipstitch firmly through both loops.

The strap forms a loop that rises about 4.5 in (11.4 cm) above the rim.

Final Blocking

  1. Weave in all ends on the inside. Run each tail along its own color change so no tails show through the lattice.
  2. Stuff the body firmly with a rolled towel, or slip in an inflated balloon to fill out the ornament shape.
  3. Spray the whole holder evenly with water until damp, not soaked.
  4. Use your fingers to gently pull each lattice loop into an even diamond.
  5. Pinch the tip into a neat point and straighten the gold stripes so they run level.
  6. Flatten the strap and lay it straight.
  7. Let it dry completely, for at least 24 hours, before removing the stuffing.

Final Quality-Control Checklist

  • The bottom opening is about 1.5 in (3.8 cm) across and not puckered.
  • The widest flat width is about 8.5 in (21.6 cm).
  • The lattice shows 15 even diamonds around.
  • Both gold stripes are level and unbroken.
  • The top border shows 24 evenly spaced puffs.
  • The strap ends sit directly opposite each other.
  • The total height is about 11.75 in (29.8 cm) without the strap.
  • All joins are stacked at the back.

Troubleshooting

The tip curls or ruffles. Your increases are too loose. Go down a hook size for Rnds 1 to 9 only.

The lattice looks lopsided. You may have anchored a sc in a chain instead of in the space. Always work around the whole ch-5 loop.

Rnd 25 doesn’t give 60 sts. Count your Rnd 24 loops. You need exactly 15.

The puffs lean to one side. Pull the final loop snugly through all 7 loops, and keep every ch 1 the same size.

The strap stretches. Use a firm cotton and work the strap rows more tightly. You can also slip stitch along both long edges to stabilize it.

Bags fall out on their own. Weave a strand of plum through Rnd 1, pull it in slightly, and secure it on the inside.

Care

Hand wash in cool water with mild soap, then lay flat to dry, reshaping it over a towel. Avoid the dryer, which can dull metallic yarn.

Purple crocheted Christmas ornaments with cream stripes and gold metal caps displayed in a festive holiday setting.

Final Notes

Everything depends on one chain of measurements. A gauge of 14 sc and 15 rnds = 4 in (10.2 cm) gives a 16-st opening of 1.5 in (3.8 cm) and a 60-st belly of 8.5 in (21.6 cm) flat. The 15-loop lattice converts back to 60 sts, and the shoulder tapers to a 48-st neck of 6.75 in (17.1 cm). The 48-st cream border adds 1.5 in (3.8 cm), for a total of 11.75 in (29.8 cm). Check each stage as you go, and your bag holder will hang straight and full.

Happy crocheting!

Leave a Comment