These little hanging baskets look like soft lace bells. Each one has a narrow solid rim at the top and rows of open fan shells that widen toward the bottom. The lower edge ends in a round of rounded scallops that flares out past the base.
The set is worked in one calm sage green cotton. Three baskets hang side by side from a wooden dowel. Each hangs from its own crocheted strap, pinched into a brown leather tab with a brass snap. They work well on a bathroom or vanity wall for brushes, combs, and small bottles.
This pattern uses US crochet terms. Each finished basket is about 5.5″ (14.0 cm) tall from scallop tip to rim, 3.5″ (8.9 cm) across the top opening, and 6.5″ (16.5 cm) across the scalloped hem.
Each basket is worked without seams. You make a flat single crochet base, turn it up into a lace body worked in joined rounds, and close the top with a solid band. Then you add the scalloped hem into the front loops left free on the base edge. Last, you make three straps, sew them on, and hang the set.
Finished Size and Construction
- Finished basket size: 5.5″ (14.0 cm) tall, 3.5″ (8.9 cm) top opening, 6.5″ (16.5 cm) across the scallops
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 6 crocheted pieces (3 baskets and 3 straps), not joined to each other
- Layout: 3 baskets in one row on one dowel, spaced 7″ (17.8 cm) apart center to center
- Base size: 4.75″ (12.1 cm) diameter
- Size before the scalloped hem: body 4.5″ (11.4 cm) tall on a 4.75″ (12.1 cm) base
- Hem (border) depth: about 1″ (2.5 cm) below the base edge
- Strap: 13.75″ x 0.75″ (34.9 x 1.9 cm) before attaching
Materials
Choose a smooth, firm worsted cotton or cotton blend. Cotton keeps the shell shapes crisp and holds up in damp bathroom air. Avoid very soft or splitty yarn, because the lace needs some body to keep its bell shape.
- Sage green worsted cotton: 180 g (about 306 m)
These quantities include a margin of about 20%. Each basket uses about 45 g and each strap about 5 g.
Tools and hardware:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- 8 locking stitch markers
- Scissors and measuring tape
- 3 leather tabs, 1″ x 4″ (2.5 x 10.2 cm), with brass snaps or rivets
- 1 wooden dowel, 0.75″ (1.9 cm) diameter and 24″ (61.0 cm) long, with 2 wall brackets
- Blocking mat, pins, and a jar about 3.5″ (8.9 cm) wide
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- st(s): stitch(es)
- sp: space
- sk: skip
- BLO / FLO: back loop only / front loop only
- rep: repeat
- Rnd: round
Special stitch – Shell: Work the stated number of dc into the same stitch. For example, a “7-dc shell” is 7 dc in one stitch. The center dc is the 4th dc of a 7-dc shell, the 3rd dc of a 5-dc shell, and the 5th dc of a 9-dc shell.
Gauge and Checkpoints
Gauge: 16 sc x 18 rnds = 4″ (10.2 cm) in sc worked in the round.
Make one complete basket before you start the other two. Measure it at each checkpoint below. If the first basket matches, the next two will too.
- After Rnd 5 of the base: about 2.4″ (6.1 cm) across
- After Rnd 10 of the base: 4.75″ (12.1 cm) across
- After Rnd 19 (end of the lace): lace about 3.5″ (8.9 cm) tall from the base edge
- After Rnd 24 (rim): body 4.5″ (11.4 cm) tall, top opening 3.5″ (8.9 cm) across
- After the hem: total height 5.5″ (14.0 cm), scallops 6.5″ (16.5 cm) across
If your base is too big, go down to a 4.0 mm hook. If it is too small, go up to a 5.0 mm hook. Fix the size at the base stage. Every later round depends on the 60-stitch edge, so a size error in the base carries all the way up.

Basket Base
Work in joined rounds with the right side facing you. Do not turn.
Rnd 1: Make a magic ring. Ch 1, work 6 sc in the ring, and join with a sl st to the first sc. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around, join. (12 sts)
Rnd 3: Ch 1, sc in next st, 2 sc in next st; rep from * around, join. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st; rep around, join. (24 sts)
Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st; rep around, join. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st; rep around, join. (36 sts)
Rnd 7: Ch 1, sc in next 5 sts, 2 sc in next st; rep around, join. (42 sts)
Rnd 8: Ch 1, sc in next 6 sts, 2 sc in next st; rep around, join. (48 sts)
Rnd 9: Ch 1, sc in next 7 sts, 2 sc in next st; rep around, join. (54 sts)
Rnd 10: Ch 1, sc in next 8 sts, 2 sc in next st; rep around, join. (60 sts)
Check that the disc lies flat and measures 4.75″ (12.1 cm). If it starts to form corners, move the increases to different positions from one round to the next.
Lace Body
Rnd 11 (turning round): Ch 1, sc in BLO of each st around, join. (60 sts)
Leave the free front loops of Rnd 10 unworked for now; the hem goes into them later. From this round on, the sides start to rise.
Rnd 12 (7-dc shells): Ch 1, sc in first st, sk 2 sts, 7-dc shell in next st, sk 2 sts, sc in next st; rep from * 8 more times, sk 2 sts, 7-dc shell in next st, sk 2 sts, join to first sc. (10 shells and 10 sc = 80 sts)
Each repeat uses 6 base stitches, and 10 x 6 = 60.
Rnd 13 (ch-4 arches): Sl st in next 4 dc to reach the center dc of the first shell. Ch 1, sc in same dc, ch 4, dc in next sc, ch 4, sc in center dc of next shell, ch 4, dc in next sc, ch 4; rep from * 8 more times, join to first sc. (10 sc, 10 dc, 20 ch-4 sps)
Rnd 14 (offset 7-dc shells): Ch 1, sc in same sc, sk ch-4 sp, 7-dc shell in next dc, sk ch-4 sp, sc in next sc; rep from * 8 more times, sk ch-4 sp, 7-dc shell in next dc, join to first sc. (10 shells and 10 sc = 80 sts)
The new shells sit above the sc of Rnd 12. Shifting them half a repeat like this creates the overlapping fan-scale pattern.
Rnd 15 (ch-3 arches): Sl st in next 4 dc. Ch 1, sc in same dc, ch 3, dc in next sc, ch 3, sc in center dc of next shell, ch 3, dc in next sc, ch 3; rep from * 8 more times, join. (10 sc, 10 dc, 20 ch-3 sps)
Rnd 16 (5-dc shells): Ch 1, sc in same sc, sk ch-3 sp, 5-dc shell in next dc, sk ch-3 sp, sc in next sc; rep from * 8 more times, sk ch-3 sp, 5-dc shell in next dc, join. (10 shells and 10 sc = 60 sts)
Rnd 17 (ch-3 arches): Sl st in next 3 dc. Ch 1, sc in same dc, ch 3, dc in next sc, ch 3, sc in center dc of next shell, ch 3, dc in next sc, ch 3; rep from * 8 more times, join. (10 sc, 10 dc, 20 ch-3 sps)
Rnd 18 (5-dc shells): Rep Rnd 16. (10 shells and 10 sc = 60 sts)
Rnd 19 (ch-2 arches): Sl st in next 3 dc. Ch 1, sc in same dc, ch 2, dc in next sc, ch 2, sc in center dc of next shell, ch 2, dc in next sc, ch 2; rep from * 8 more times, join. (10 sc, 10 dc, 20 ch-2 sps)
The shells shrink from 7 dc to 5 dc, and the arches shorten from ch 4 to ch 2. That is what narrows the body into a bell. The lace should now be about 3.5″ (8.9 cm) tall.
Solid Rim
Rnd 20 (conversion round): Ch 1, sc in sc, sc in ch-2 sp, sc in dc, sc in ch-2 sp; rep from * around, join. (20 sc worked 1-per-stitch into the sc and dc + 20 sc worked into spaces = 40 sts)
Rnd 21: Ch 1, sc in next 9 sts, 2 sc in next st; rep from * 3 more times, join. (40 sts worked 1-per-stitch + 4 increases = 44 sts)
Rnds 22–24: Ch 1, sc in each st around, join. (44 sts)
Fasten off and weave in the end. The rim band should be about 1″ (2.5 cm) deep. The opening should measure 3.5″ (8.9 cm) across, because 44 sts ÷ 4 sts per inch = 11″ (27.9 cm) around.
Straps (Make 3)
Foundation: Ch 56.
Row 1: Sc in 2nd ch from hook and in each ch across. (55 sts)
Rows 2–3: Ch 1, turn, sc in each st across. (55 sts)
Fasten off, leaving a 12″ (30.5 cm) tail. The strap should measure 13.75″ x 0.75″ (34.9 x 1.9 cm).
Make All Pieces
Repeat the base, body, rim, and hem to make 3 baskets in sage green, about 45 g each. Make 3 straps in sage green, about 5 g each. That adds up to 150 g, which the 180 g listed in Materials covers.
Hanging layout on the 24″ (61.0 cm) dowel:
|--5"--[Tab 1]----7"----[Tab 2]----7"----[Tab 3]--5"--|
Basket 1 Basket 2 Basket 3
The spacing adds up as 5″ + 7″ + 7″ + 5″ = 24″ (12.7 + 17.8 + 17.8 + 12.7 = 61.0 cm). Each basket is 6.5″ (16.5 cm) wide and the tabs are 7″ (17.8 cm) apart, so the scallops almost touch without crowding.
Joining
The baskets are not joined to each other. Each strap is sewn to its own basket, and its leather tab clamps it to the dowel.
Method: Whip stitch with the strap tail.
Stitch logic: Place one marker in rim st 1 and another in st 23. They are exactly 22 sts apart on the 44-st rim, so they sit directly opposite each other. Hold the last 4 sts (1″ / 2.5 cm) of one strap end upright against the inside of the rim at the first marker, covering Rnds 21–24. Whip stitch around all edges of that overlap. Repeat with the other strap end at the second marker, using a separate length of yarn.
Tension: Sew firmly, but don’t pull the rim inward. The rim should stay round when you look down into the basket.
Pinch and clamp: Find the strap’s midpoint (st 28) and pinch it flat. Wrap the leather tab around the dowel so it encloses the pinched strap, then close the snap.
Size checkpoint: Each side of the strap should measure about 5.9″ (15.0 cm) from rim to tab, and the basket should hang level. If it tilts, check that the strap ends are exactly 22 sts apart.
Scalloped Hem (Border)
Border gauge: Same as the main gauge, 16 sc = 4″ (10.2 cm). Turn the basket upside down so the base faces you, and work into the free front loops of Rnd 10.
Hem Rnd 1: Join yarn in any free front loop of Rnd 10. Ch 1, sc in FLO of each st around, join. (60 sts)
Hem Rnd 2 (9-dc shells): Ch 1, sc in first st, sk 2 sts, 9-dc shell in next st, sk 2 sts, sc in next st; rep from * 8 more times, sk 2 sts, 9-dc shell in next st, sk 2 sts, join. (10 shells and 10 sc = 100 sts)
Hem Rnd 3 (edging): Ch 1, sc in first sc, sc in next 3 dc, 2 sc in each of next 3 dc, sc in next 3 dc, sc in next sc; rep from * 8 more times, sc in next 3 dc, 2 sc in each of next 3 dc, sc in next 3 dc, join to first sc. (100 sts worked 1-per-stitch + 30 extra = 130 sts, or 13 sts per scallop)
Fasten off and weave in the end.
Why the math works: 60 front loops ÷ 6 sts per repeat gives exactly 10 scallops, which match the 10 fans of the body. Each 9-dc shell plus its sc takes up 10 sts. Hem Rnd 3 adds 3 sts at the peak of each scallop, so each scallop has 13 sts and the round has 10 x 13 = 130 sts. The extra stitches let the curved outer edge lie smooth instead of cupping.
Final Blocking
- Soak each basket in cool water, then gently squeeze out the excess. Do not wring.
- Roll it in a towel to remove more water.
- Slide the basket over a jar 3.5″ (8.9 cm) wide so the rim rounds out.
- Shape the fans with your fingers so every arch opens evenly.
- Ease the scallops outward to 6.5″ (16.5 cm) across, and pin the tips if needed.
- Pin the straps flat to 13.75″ (34.9 cm). Let everything dry completely before sewing.
Final Quality-Control Checklist
- The base measures 4.75″ (12.1 cm) and lies flat
- Each lace round has 10 fans, and each fan round is shifted half a repeat from the one below
- The rim has 44 sts and a 3.5″ (8.9 cm) opening
- The hem has 10 scallops of 13 sts each (130 total)
- The strap ends are sewn exactly opposite each other (22 sts apart)
- All three baskets are within 0.25″ (0.6 cm) of each other in height
- All ends are woven in securely on the inside
Troubleshooting
- The base ruffles: You have extra stitches or loose tension. Recount to 60 and go down a hook size.
- The base cups: You are missing increases. Recount every round.
- The fans don’t shift: Make sure the Rnd 14 shells go into the dc of Rnd 13, not into the sc.
- The body doesn’t narrow: Check that you switched to 5-dc shells and shorter arches.
- The rim flares: Skip the 4 increases in Rnd 21 and keep 40 sts.
- The hem cups: In Hem Rnd 3, work one more 2-sc increase at each scallop peak.
- The basket tilts: Re-sew the strap ends exactly 22 sts apart.
Care
Hand wash in cool water with mild soap and reshape while damp. Dry the baskets flat or over a jar, away from direct heat.

Final Notes
The whole set depends on one chain of measurements. A 60-st base at 4.75″ (12.1 cm) gives 10 fan repeats. The fans narrow the body to 4.5″ (11.4 cm) tall, and the 44-st rim opens to 3.5″ (8.9 cm). The 130-st hem flares to 6.5″ (16.5 cm) and adds 1″ (2.5 cm) of depth, for a basket 5.5″ (14.0 cm) tall. Straps sewn 22 sts apart keep each basket level on the 24″ (61.0 cm) dowel. Check the first basket at every stage, and the other two will match.
Happy crocheting!