The Prima Rose Ballerina is a small, flat lace motif. A deep burgundy dancer stands with her arms raised in a pointed oval, a solid spiral head floats inside it, and a blush pink tutu flares out below the bodice. A burgundy edge frames the skirt, and two corded legs taper to a single pointed foot.
The colors are deliberately simple: one dark, one pale. Burgundy carries the figure and its outline. Pink is used only for the tutu, so the open lace reads clearly against the solid body.
This pattern uses US crochet terms. The finished motif measures about 8.5 in (21.6 cm) tall from the top of the hanging ring to the tip of the foot, and 4.25 in (10.8 cm) wide across the tutu.
Construction is one piece with color changes. You make the head first, then crochet the bodice, and work the arms, hanging ring and neck straight off the top of the bodice. The tutu is worked into the bottom of the bodice in pink. A burgundy border finishes the skirt, and the legs and foot are added last.
Finished Size and Construction
- Finished size: 8.5 in (21.6 cm) tall x 4.25 in (10.8 cm) wide
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK / light (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 motif (head made first, then attached during the neck step)
- Layout: Vertical figure: ring, arms and head, bodice, tutu, legs, foot
- Piece sizes: head 1.25 in (3.2 cm) across; bodice 1.75 in (4.4 cm) wide x 1.2 in (3.0 cm) tall
- Tutu size before border: 4 in (10.2 cm) wide x 1.55 in (3.9 cm) tall
- Border depth: about 0.2 in (0.5 cm) along the hem, about 0.125 in (0.3 cm) on each side edge
Materials
Choose a smooth, mercerized or matte DK cotton. Cotton keeps the scallops crisp and makes the corded chains look braided. Avoid fuzzy or very stretchy yarns, which blur the lace.
- Burgundy (Color A): 10 g, about 24 m (26 yd)
- Blush pink (Color B): 5 g, about 12 m (13 yd)
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- Scissors
- 2 stitch markers
- Rustproof pins, foam blocking mat and a spray bottle
Quantities include a margin of about 25% for your gauge swatch and tails.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
- rep – repeat
Special technique – corded chain: Make a chain, then return along it working 1 sl st into the back bump of each ch. This doubles the chain into a firm, braided-looking cord. The arms and legs both use this technique.
Gauge and Checkpoints
- Sc gauge: 18 sc and 20 rows = 4 in (10.2 cm)
- Chain gauge: 10 ch = 2 in (5.1 cm)
Make the head and bodice first and measure them before going further. They are small, so they work as your gauge test.
Checkpoints:
- Head after Round 3: 1.1 in (2.8 cm) across.
- Head after Round 4: 1.25 in (3.2 cm) across.
- Bodice after Row 6: 1.75 in (4.4 cm) wide x 1.2 in (3.0 cm) tall.
- Each arm chain (14 ch): about 2.8 in (7.1 cm) long before the return pass.
- Tutu after Row 1: about 2.75 in (7.0 cm) wide; after Row 2: 3.5 in (8.9 cm); after Row 3: 4 in (10.2 cm).
- Each leg chain (21 ch): about 4.2 in (10.7 cm).
If your pieces come out too big, go down to a 3.25 mm hook. If they’re too small, go up to a 3.75 mm hook. Chain gauge matters as much as sc gauge here. Loose chains make floppy arms and a droopy tutu, so keep each ch about the same height as your hook shank.

Head (Burgundy)
Make 1 head and leave a 4 in (10.2 cm) tail.
Round 1: Make a magic ring, ch 1, 6 sc in ring. Do not join; work in a spiral. Place a marker in the last st. (6 sc)
Round 2: 2 sc in each st around. (12 sc)
Round 3: [Sc in next st, 2 sc in next st] 6 times. (18 sc)
Round 4: Sl st in each st around. (18 sl st)
Fasten off. Pull the magic ring tight and weave in the center tail on the WS. Round 4 is your raised spiral rim, the same color as the rest of the head.
Bodice (Burgundy)
Foundation: Ch 9.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. (8 sc)
Rows 2–6: Ch 1, turn, sc in each st across. (8 sc)
Do not fasten off. Number the Row 6 stitches 1 to 8 in the order you just worked them; your hook is now in st 8. The bodice measures 1.75 in (4.4 cm) wide x 1.2 in (3.0 cm) tall.
Arms and Hanging Ring (Burgundy)
These steps continue straight from Row 6.
Arm chains: Ch 14 (first arm). Ch 6, sl st in 6th ch from hook to close a small ring. Ch 14 (second arm). Sl st in st 1 of Row 6.
You now have a long chain loop rising from both top corners of the bodice, with the small ring at its peak.
Return pass: Do not turn. Sl st in the back bump of each of the 14 ch of the second arm (14 sl st). Work 9 sc into the hanging ring. Sl st in the back bump of each of the 14 ch of the first arm (14 sl st). Sl st in st 8 of Row 6.
Stitch count for the arms: 14 sl st + 9 sc + 14 sl st. The ring lies about 2.2 in (5.6 cm) above the bodice. It measures 0.4 in (1.0 cm) across. Gently shape the arms into a pointed oval about 2.5 in (6.4 cm) across at the widest point.
Neck and Head Attachment (Burgundy)
Neck: Sl st in st 7, st 6 and st 5 of Row 6. Ch 3. With the head’s RS facing you, insert the hook under both loops of one Round 4 sl st at the bottom of the head and sl st. Sl st in the next Round 4 st. Ch 3. Sl st in st 4 of Row 6.
Fasten off and weave in the ends. You now have two parallel 3-ch strands, about 0.6 in (1.5 cm) long, centered on the bodice. The head sits inside the arm oval with a small gap above it.
Tutu (Blush Pink)
Turn the bodice upside down so the free loops of the foundation chain face up. There are 8 free loops.
Row 1 (RS): Join pink in the first free loop. Ch 3 (counts as first dc), dc in the same loop. [Ch 1, 2 dc in next loop] 7 times. (16 dc in 8 pairs, 7 ch-1 sp)
Row 2: Ch 4, turn (counts as dc + ch 1). Dc in next dc. Ch 2, dc in next dc, ch 1, dc in next dc; rep from * 6 more times, working the final dc in the top of the turning ch-3. (16 dc, 8 ch-1 sp, 7 ch-2 sp)
The pairs now open into V-shaped spokes, with a wider ch-2 gap between each pair.
Row 3: Ch 1, turn. Sc in first dc. Ch 5, sc in next ch-2 sp; rep from * 6 more times. Ch 5, sc in 3rd ch of the turning ch-4. (9 sc, 8 ch-5 loops)
Fasten off. Each ch-5 loop sits over one dc pair, making 8 scallops. The tutu measures 4 in (10.2 cm) wide x 1.55 in (3.9 cm) tall before the border.
Border (Burgundy)
Border gauge: 6 sc per ch-5 loop, and 2 sc per dc row end.
With the RS facing, join burgundy in the Row 1 row end at the right edge of the tutu, right next to the bodice.
Border round (worked as one pass):
- Right side edge: 2 sc in Row 1 row end, 2 sc in Row 2 row end. (4 sc)
- Hem: Sc in first Row 3 sc. [6 sc in next ch-5 loop, sl st in next sc] 7 times. 6 sc in last ch-5 loop, sc in last Row 3 sc. (1 + 48 + 1 = 50 sc, 7 sl st)
- Left side edge: 2 sc in Row 2 row end, 2 sc in Row 1 row end. (4 sc)
Total: 4 + 50 + 4 = 58 sc, plus 7 sl st. Fasten off and weave in the ends.
Why the math works: A ch-5 loop is about 1 in (2.5 cm) of chain arched into a curve. Six sc is 1.2 sc per chain, which covers the curve without crowding. Fewer stitches make the scallops cup; more make them ruffle. The 7 sl st sit exactly on the 7 inner Row 3 sc, so every scallop gets its own clear dip. A dc row end is about two sc tall, so 2 sc per row end keeps the side edges flat. The edging adds about 0.125 in (0.3 cm) on each side, so the tutu goes from 4 in (10.2 cm) to 4.25 in (10.8 cm) wide. It adds about 0.2 in (0.5 cm) at the hem, for a total tutu height of 1.75 in (4.4 cm).
Legs and Foot (Burgundy)
The legs attach to the back of the tutu at Row 1. Count the Row 1 ch-1 spaces from right to left (1 to 7); the center space is 4.
Leg chains: With the WS facing, join burgundy in ch-1 sp 3. Ch 21 (first leg).
Foot: Ch 4, sl st in 4th ch from hook to make a small ring. In the ring work: sc, hdc, dc, ch 2, dc, hdc, sc. The ch-2 forms the pointed tip.
Second leg: Ch 21. Sl st in ch-1 sp 5 of Row 1.
Return pass: Ch 1, turn. Sl st in the back bump of each of the 21 ch of the second leg (21 sl st). Sl st in the base of the foot ring. Sl st in the back bump of each of the 21 ch of the first leg (21 sl st). Sl st in ch-1 sp 3.
Fasten off and weave in the ends. The legs fall behind the lace and come out below the hem, closing into a narrow V. The foot is about 0.5 in (1.3 cm) long.
Height check: ring 0.4 in (1.0 cm) + arm rise 2.2 in (5.6 cm) + bodice 1.2 in (3.0 cm) + legs 4.2 in (10.7 cm) + foot 0.5 in (1.3 cm) = 8.5 in (21.6 cm).
Final Blocking
- Weave in all remaining tails along the matching color before blocking.
- Spray the motif evenly with water until it is damp but not dripping.
- Lay it face up on the blocking mat. Pin the hanging ring and foot tip so the figure is 8.5 in (21.6 cm) tall.
- Pin the bodice square, 1.75 in (4.4 cm) wide.
- Shape the arms into a symmetrical pointed oval, 2.5 in (6.4 cm) wide, with the head centered inside it.
- Pin each tutu scallop at its lowest point, so the hem reaches 4.25 in (10.8 cm) wide and fans out evenly.
- Open each V spoke in the tutu with your fingertip so the gaps match.
- Bring the legs together so they meet neatly at the foot.
- Let it dry completely, at least 6 hours, before you unpin it.
Final Quality-Control Checklist
- Head is 1.25 in (3.2 cm) across with 18 sts in each of Rounds 3 and 4.
- Bodice has 8 sc in each of 6 rows.
- Arms have 14 ch each, both corded, with 9 sc in the ring.
- Neck strands are both 3 ch long and centered on bodice sts 4 and 5.
- Tutu Row 2 has 16 dc; Row 3 has 8 loops.
- Border has 58 sc and 7 sl st; the scallops lie flat.
- Legs are 21 ch each and attached in ch-1 sp 3 and sp 5.
- Motif is 8.5 in (21.6 cm) x 4.25 in (10.8 cm) after blocking.
Troubleshooting
Head cups like a bowl: Your sc are tight. Go up a hook size for the head only, or work Round 4 loosely.
Head ruffles: Check that Round 3 has exactly 18 sts.
Arms look thin and floppy: You skipped the return pass, or your chains are loose. Rework the arms with tighter chains.
Hanging ring too tight to use: Work the 9 sc loosely, or make the ring with ch 7.
Tutu ruffles: Make the Row 2 chains snug. If it still ruffles, change the ch-2 spaces to ch 1.
Tutu curls up: Your dc are tight. Go up half a hook size for the tutu.
Scallops cup: Use 7 sc per loop instead of 6 and add the extra stitches evenly.
Legs uneven: Recount both leg chains; they must both be 21.
Care
Hand wash in cool water with mild soap, roll in a towel to remove the water, and dry flat, pinning to shape if needed. Don’t tumble dry.

Final Notes
The measurement chain is short and easy to check. The head is 1.25 in (3.2 cm) across. The bodice is 1.75 in (4.4 cm) wide and 1.2 in (3.0 cm) tall. The arms rise 2.2 in (5.6 cm) to a 0.4 in (1.0 cm) ring. The tutu grows from 2.75 in (7.0 cm) to 4 in (10.2 cm) wide, and the border brings it to 4.25 in (10.8 cm). The legs and foot bring the full height to 8.5 in (21.6 cm). If you hit each checkpoint, the finished dancer will match.
The motif hangs well from its ring on its own, so you can display it as an ornament, a bag charm or a window decoration.
Happy crocheting!