Rose Trellis Strip Door Curtain Crochet Pattern

This door curtain is made of seven long, narrow strips of sage green filet mesh. Each strip carries a single column of dusty pink roses, and every rose has two small green leaves and a little pink V-shaped stem tip underneath. The strips hang side by side from a wooden rod by two loops each. They are not joined to one another, so you can walk through the doorway and the strips simply part.

The palette is soft and vintage: sage green for the mesh, borders, loops and leaves, and dusty rose for the flowers and stem tips. The open mesh lets light through, and the raised roses give the curtain texture and depth. All instructions use US crochet terms.

Each finished strip measures 5.2 in (13.2 cm) wide by 71.8 in (182.4 cm) long, plus the hanging loops, which add 2 in (5.1 cm). With seven strips spaced about 0.6 in (1.5 cm) apart, the curtain covers about 40 in (101.6 cm) of rod.

Construction is simple and repetitive. You crochet each strip in rows of filet mesh, from a solid bottom row to a solid top row. You make the roses, leaves and stem tips separately and sew them on. Last, you add a two-round sc border and two hanging loops.

Finished Size and Construction

  • Finished strip size: 5.2 in x 71.8 in (13.2 cm x 182.4 cm), plus 2 in (5.1 cm) loops
  • Curtain width as hung: about 40 in (101.6 cm)
  • Skill level: Intermediate
  • Terminology: US terms
  • Yarn weight: DK (#3) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 7 mesh strips, 70 roses, 140 leaves, 70 stem tips
  • Layout: 7 strips side by side, each with 10 roses in a single vertical column
  • Strip size before border: 4.4 in x 71 in (11.2 cm x 180.3 cm)
  • Border depth: 0.4 in (1.0 cm) per side
  • Rose diameter: 2.4 in (6.1 cm); leaf length 1.25 in (3.2 cm)

Materials

Use a smooth mercerized or matte cotton in DK weight, about 210 m per 100 g. Cotton keeps the mesh crisp and holds its shape when hanging. Avoid fuzzy yarns, because they blur the mesh openings.

  • Sage green (Color A): 700 g / about 1470 m, for the mesh, borders, loops and leaves
  • Dusty rose (Color B): 320 g / about 672 m, for the roses and stem tips

These quantities include a margin of about 10% for gauge differences and tails.

Tools:
– 4.0 mm (G-6) crochet hook
– Tapestry needle
– Stitch markers
– Rust-proof pins and a blocking surface long enough for at least half a strip
– Tape measure
– Wooden curtain rod up to 1 in (2.5 cm) in diameter

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sp – space
  • st(s) – stitch(es)
  • rnd – round

Special stitch – back-post sl st: working from the back of the rose, insert the hook from right to left around the post of the stitch named, yarn over, and pull through the post and the loop on the hook. This anchors the loops of the next petal layer behind the previous one.

Gauge and Checkpoints

Gauge: 20 dc and 8 dc rows = 4 in (10.2 cm). That means 5 sts and 2 rows per 1 in (2.5 cm). One mesh square (3 sts wide, 1 row tall) measures 0.6 in x 0.5 in (1.5 cm x 1.3 cm).

Test one piece first. Work Rows 1–15 of the first strip and stop. This piece becomes part of your strip, so nothing is wasted.

Checkpoints:
– After Row 1: 22 sts = 4.4 in (11.2 cm) wide
– After Row 15: 7.5 in (19.1 cm) tall
– After each additional 14 rows: 7 in (17.8 cm) more
– After Row 71: 35.5 in (90.2 cm)
– After Row 142: 71 in (180.3 cm)
– Finished rose: 2.4 in (6.1 cm) across
– Finished leaf: 1.25 in (3.2 cm) long

If your piece is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. If the width is right but the rows are too short, pull up the first loop of each dc slightly taller. Don’t change the stitch counts, because the border math depends on them.

Close-up of a dusty pink crocheted rose bloom on a sage green lattice grid background.

Mesh Strip (Make 7)

With Color A, ch 24.

Row 1 (solid): Dc in 4th ch from hook (the skipped 3 ch count as a dc) and in each ch across. (22 sts)

Row 2 (mesh): Ch 3 (counts as dc), turn. Ch 2, skip 2 sts, dc in next st 7 times; the last dc goes in the top of the turning ch. (8 dc, 7 ch-2 sps = 22 sts)

Rows 3–141: Ch 3 (counts as dc), turn. Ch 2, dc in next dc 7 times; the last dc goes in the 3rd ch of the turning ch. (8 dc, 7 ch-2 sps = 22 sts per row)

Row 142 (solid): Ch 3 (counts as dc), turn. 2 dc in next ch-2 sp, dc in next dc 7 times. (1 + 21 = 22 sts)

Fasten off and weave in ends. You now have 140 mesh rows between two solid rows, divided into 10 blocks of 14 rows each. Block 1 is Rows 2–15, Block 2 is Rows 16–29, and so on, up to Block 10, which is Rows 128–141. Place a marker at the side edge at the start of each block.

Rose (Make 70)

With Color B, make a magic ring.

Rnd 1: Ch 1, 12 sc in ring, pull the ring closed, sl st to first sc. (12 sc)

Rnd 2: Ch 1, sc in first sc, ch 3, skip next sc, sc in next sc, ch 3, skip next sc 5 times, sl st to first sc. (6 sc, 6 ch-3 sps)

Rnd 3: Sl st into first ch-3 sp. In each ch-3 sp work (sc, hdc, 3 dc, hdc, sc). Sl st to first sc. (6 petals, 42 sts)

Rnd 4: Fold the petals forward. Back-post sl st around the first sc of Rnd 2. Ch 5, back-post sl st around the next sc of Rnd 2 5 times, then ch 5 and sl st to the first back-post sl st. (6 ch-5 loops)

Rnd 5: In each ch-5 loop work (sc, hdc, 5 dc, hdc, sc). Sl st to first sc. (6 petals, 54 sts) Fasten off, leaving a 12 in (30.5 cm) tail.

Center coil: With Color B, ch 11. Work 3 sc in 2nd ch from hook and in each ch across. (30 sc) The strip twists into a spiral by itself. Roll it tightly, then sew it upright over Rnd 1 so it fills the center of the rose.

Checkpoint: 2.4 in (6.1 cm) across, with an inner petal layer standing in front of a larger outer layer.

Leaf (Make 140)

With Color A, ch 7.

Leaf: Sc in 2nd ch from hook, hdc in next ch, dc in each of next 2 ch, hdc in next ch, 3 sc in last ch. Working along the opposite side of the foundation ch: hdc in next ch, dc in each of next 2 ch, hdc in next ch, sc in last ch. (5 + 3 + 5 = 13 sts) Ch 2, sl st in 2nd ch from hook to form the pointed tip. Fasten off, leaving an 8 in (20.3 cm) tail.

The 3-sc end is the base, which tucks under the rose, and the picot is the tip.

Stem Tip (Make 70)

With Color B, ch 9 and fasten off, leaving a 6 in (15.2 cm) tail. Fold it at the center into a V with two arms of 4 ch each, about 0.8 in (2.0 cm) long.

Make All Pieces

Per strip: 10 roses, 20 leaves and 10 stem tips. For the whole curtain:

  • Color A: 7 strips, 140 leaves
  • Color B: 70 roses, 70 stem tips

Layout grid (S = strip, R = rose with two leaves and a stem tip):

S1  S2  S3  S4  S5  S6  S7
R   R   R   R   R   R   R    Block 10 (top)
R   R   R   R   R   R   R    Block 9
R   R   R   R   R   R   R    Block 8
R   R   R   R   R   R   R    Block 7
R   R   R   R   R   R   R    Block 6
R   R   R   R   R   R   R    Block 5
R   R   R   R   R   R   R    Block 4
R   R   R   R   R   R   R    Block 3
R   R   R   R   R   R   R    Block 2
R   R   R   R   R   R   R    Block 1 (bottom)

Joining: Attaching the Motifs

The strips are never joined to each other. All the joining in this project means sewing the motifs onto each strip. Lay the strip flat with Row 1 at the bottom.

Rose placement: Number the 7 mesh columns 1 to 7 from left to right. In each block, center the rose over column 4, between the 8th and 9th rows of the block. A 2.4 in (6.1 cm) rose covers about columns 3–5 and rows 6–10 of the block.

Stitch-to-stitch logic: With the rose tail, sew the base of each Rnd 5 petal (the sc stitches) to the nearest dc post or ch-2 bar of the mesh, 12 tacks in all. Keep the petal edges and the center coil free so they stay raised.

Leaves: Tuck the 3-sc base of one leaf under the left edge of the rose and one under the right edge. Angle the tips slightly downward over columns 2 and 6. Sew each leaf along its center line through the mesh bars.

Stem tip: Center the V below the rose over column 4, rows 3–5 of the block, with the point facing down. Tack the point and both arm ends.

Tension advice: Sew firmly but don’t pull. If you see the mesh squares around a rose pinching inward, take out the stitching and resew it more loosely.

Size checkpoint: After sewing, the strip should still measure 4.4 in x 71 in (11.2 cm x 180.3 cm). The roses should be 7 in (17.8 cm) apart, center to center.

Border

Each strip gets its own border.

Border gauge: 5 sc = 1 in (2.5 cm) on all edges. Along the side edges, each dc row is 0.5 in (1.3 cm) tall, so 2 rows take 5 sc.

Rnd 1: With the right side facing, join Color A in the last st of Row 142. Ch 1.
– Top edge: 3 sc in the first st (corner), sc in each of the next 20 sts, 3 sc in the last st (corner).
– Long side: work 5 sc over every 2 row-ends (2 sc in one, 3 sc in the next) for all 142 rows. (355 sc)
– Bottom edge: work the same as the top edge, into the 22 sts of Row 1.
– Second long side: 355 sc, the same as the first.

Sl st to first sc. Counts per side, including both corner sts: short sides 24 each (corner + 1 + 20 + 1 + corner), long sides 359 each (corner + 1 + 355 + 1 + corner). Total: 24 + 24 + 359 + 359 – 4 shared corners = 762 sts.

Rnd 2: Ch 1. Sc in each st, working 3 sc in the center sc of each corner. Sl st to first sc. Counts per side: short sides 26, long sides 361. Total: 762 + 8 = 770 sts. Fasten off.

Why the math works: 22 sts at 5 per inch gives 4.4 in (11.2 cm). 142 rows at 2.5 sc per row gives 355 sc, which spreads exactly over 71 in (180.3 cm) at 5 sc per inch. The 3-sc corners let the border turn without cupping. Each round adds 0.2 in (0.5 cm) per side, so the strip grows to 5.2 in x 71.8 in (13.2 cm x 182.4 cm).

Hanging loops: Count along the top edge of Rnd 2, with the first corner st as st 1. Join Color A in st 4, ch 20, and sl st in the same st. Work 26 sc into the ch-20 loop and sl st in the base st. Fasten off. Repeat in st 23, so the two loops sit symmetrically 3 sts in from each corner. Each loop stands 2 in (5.1 cm) tall and fits a rod up to 1 in (2.5 cm) in diameter.

Final Blocking

  1. Soak each strip in cool water with a little wool wash for 15 minutes.
  2. Press out the water in a towel. Don’t wring.
  3. Lay the strip flat and pin the straight edges to 5.2 in x 71.8 in (13.2 cm x 182.4 cm). Work half a strip at a time if your surface is short.
  4. Line up the mesh columns with a ruler so the dc posts are vertical.
  5. Shape the rose petals by hand, and don’t pin through them. Don’t press the roses flat.
  6. Let the strip dry completely, then unpin it.
  7. Slide both loops of each strip onto the rod, in order S1 to S7, leaving about 0.6 in (1.5 cm) between strips.

Final Quality-Control Checklist

  • Each strip has 22 sts across and 142 rows
  • Each strip has 10 roses, 20 leaves and 10 stem tips, all centered on column 4
  • Roses sit 7 in (17.8 cm) apart, center to center, on every strip
  • Border Rnd 2 totals 770 sts, and all corners lie flat
  • Loops sit in sts 4 and 23 of the top edge
  • All tails are woven in on the wrong side
  • All strips hang at the same length, 71.8 in (182.4 cm)

Troubleshooting

  • Mesh is slanting: Your last dc is going into the wrong place. Always work it into the 3rd ch of the turning ch.
  • Strip is too long or too short: Add or remove blocks of 14 rows; each block is 7 in (17.8 cm). Change the rose count to match.
  • Border is ruffling: You are working too many sc along the sides. Go back to 5 sc per 2 rows.
  • Border is pulling the edge in: Your sc are too tight. Use a hook 0.5 mm larger for the border only.
  • Roses are flopping forward: Add a tack stitch through the center coil to the mesh.
  • Strips hang at different lengths: Block them again together, pinned side by side to the same measurement.

Care

Hand wash in cool water and lay flat to dry, shaping the roses while damp. Don’t tumble dry, because the long strips can stretch and the mesh can distort.

Cream-colored crocheted lace curtain with dusty pink roses and green leaves hangs on a wooden rod near a sunny window.

Final Notes

The measurement chain is simple. 22 sts make a 4.4 in (11.2 cm) mesh, and 142 rows make a 71 in (180.3 cm) strip. The two-round border brings each strip to 5.2 in x 71.8 in (13.2 cm x 182.4 cm), and seven strips on the rod cover about 40 in (101.6 cm). Check your gauge early, count your stitches at every checkpoint, and the curtain will hang straight and even.

Happy crocheting!

Leave a Comment