This curtain is made of long cream chain strands, each holding a column of layered fan flowers. Light passes through the open lattice, and from across the room the flowers look like a soft repeating print.
Every flower has three layers. A burgundy scalloped fan sits at the back, a dusty-pink petal fan sits in front of it, and a cream spray of seven bobble-tipped stamens sits on top. The cream lattice ties the three colors together and keeps the curtain airy and romantic.
The pattern uses US crochet terms. The finished curtain is 63.5 in (161.3 cm) wide and 80.2 in (203.7 cm) long, measured from the top of the hanging loops to the bottom tails. It has 16 strands of 21 flowers each.
The construction is modular. You make the burgundy and pink fans in short rows, stack them, and add the stamen spray. A center spine chain links 21 flowers into a strand, and two side rails frame it. Each strand hangs from the rod by its own loop.
Finished Size and Construction
- Finished curtain: 63.5 in (161.3 cm) wide x 80.2 in (203.7 cm) long
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: DK (light, #3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 336 flower motifs joined into 16 strands of 21 flowers
- Layout: 16 strands across x 21 flowers down, spaced 4 in (10.2 cm) apart center to center
- Motif size: 3.5 in (8.9 cm) wide x 2 in (5.1 cm) tall
- Strand size before border: 3.5 in (8.9 cm) wide x 80.2 in (203.7 cm) long (spine and flowers only)
- Border depth: 0 in (0 cm). The side rails sit right on the flower corners, so a framed strand stays 3.5 in (8.9 cm) wide.
Materials
Use a smooth, mercerized DK cotton. It holds the shells crisply and stretches very little, which matters for a hanging piece this long. The amounts below assume 50 g balls of about 112 m (122 yd).
- Burgundy (Color A): 1,050 g / 2,352 m (21 balls)
- Dusty pink (Color B): 750 g / 1,680 m (15 balls)
- Cream (Color C): 750 g / 1,680 m (15 balls)
All quantities include a margin of about 15%. Buy each color from a single dye lot. A slight shade change across 336 flowers will show up clearly in daylight.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Stitch markers
– Tape measure
– Blocking mats and rust-proof pins
– Spray bottle
– Curtain rod at least 66 in (167.6 cm) long
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- sk: skip
- st(s): stitch(es)
- MR: magic ring
Special stitch: Bobble. Work dc3tog into one stitch: (yarn over, insert hook in the stated st, pull up a loop, yarn over, pull through 2 loops) 3 times, then yarn over and pull through all 4 loops on the hook.
Gauge and Checkpoints
- Dc gauge: 18 dc x 10 rows = 4 in (10.2 cm)
- Chain gauge: 10 ch = 2 in (5.1 cm), measured lightly relaxed
Make one complete motif before you start production, and measure the burgundy fan after each row:
- Row 1: 1.25 in (3.2 cm) across the straight edge
- Row 2: 2 in (5.1 cm)
- Row 3: 2.75 in (7.0 cm)
- Row 4: 3.5 in (8.9 cm) wide x 2 in (5.1 cm) tall
The pink fan should measure 2.75 in (7.0 cm) wide x 1.5 in (3.8 cm) tall.
If your motif is too big, go down 0.25 mm in hook size. If it’s too small, go up 0.25 mm.
Check your chains separately, because many crocheters chain tighter than they work dc. If 10 ch measures less than 2 in (5.1 cm), use a hook one size larger for the lattice only.

Burgundy Back Fan
With Color A:
Row 1: MR, ch 3 (counts as dc), 10 dc in ring. Pull the ring closed into a half circle and turn. (11 sts)
Row 2: Ch 3 (counts as dc), dc in first st, 2 dc in each of next 9 sts, dc in top of beginning ch-3. Turn. (21 sts)
Row 3: Ch 3 (counts as dc), 2 dc in next st, dc in next st 10 times. Turn. (31 sts)
Row 4 (shells): Ch 1, sc in first st, sk 2, 9 dc in next st, sk 2, sc in next st 5 times, with the last sc in the top of the turning ch. (45 dc + 6 sc = 51 sts in 5 shells)
Fasten off, leaving a 12 in (30.5 cm) tail.
Mark the join points:
– T (top): the 5th dc of the 3rd shell
– L and R (corners): the first and last sc of Row 4
– B (bottom point): the center of the magic ring
Dusty-Pink Front Fan
With Color B:
Rows 1–2: Work as for the burgundy fan. (21 sts after Row 2)
Row 3 (petals): Ch 1, sc in first st, sk 1, 7 dc in next st, sk 1, sc in next st 5 times. (35 dc + 6 sc = 41 sts in 5 petals)
Fasten off, leaving a 12 in (30.5 cm) tail.
Cream Stamen Spray
With Color C, leave an 8 in (20.3 cm) tail and ch 1. This chain is the base.
Ch 8, Bobble in 4th ch from hook, sl st in each of next 4 ch, sl st in base ch 7 times. (7 stamens)
Fasten off. Each stamen is about 1 in (2.5 cm) long.
Layering One Flower
- Lay the pink fan on the burgundy fan, lining up the magic rings and the straight edges.
- With the pink tail, whipstitch the outer edge of pink Row 2 to burgundy Row 2, then tack down each of the 6 pink sc. The pink petals now cover burgundy Row 3, and the burgundy shells frame them.
- Place the base of the stamen spray on B. Fan the 7 stamens out evenly so each bobble lands where pink Row 2 meets the petals.
- Tack each bobble and the base in place with the cream tail. Weave in all ends on the back.
Make All Pieces
Make 336 complete flowers (16 strands x 21 flowers). That means 336 burgundy fans, 336 pink fans, and 336 stamen sprays.
Work in batches of 21 so that each finished batch becomes one strand. This keeps your tension consistent within each column.
Rod: O O O ... O 16 loops, 4 in (10.2 cm) apart
| | | |
R1 F F F ... F
R2 F F F ... F
R3 F F F ... F
... ... ... ... ...
R21 F F F ... F
S1 S2 S3 ... S16
Joining: The Center Spine
The spine is one continuous cream chain that joins 21 flowers into a strand. It runs in the open gap between flowers and passes behind each flower from T to B. Work every sl st join from back to front so the chain lies flat behind the motif.
- Hanging loop: With Color C, ch 16, then sl st in the first ch to form the loop.
- Stem: Ch 8, sl st in T of Flower 1.
- Behind the flower: Ch 10, carry the chain behind the flower, and sl st in B.
- Gap: Ch 8, sl st in T of the next flower.
- Repeat Steps 3–4 for Flowers 2–21. On Flower 21, stop after Step 3.
- Tail: Ch 15 and fasten off.
Stitch-to-stitch logic: Each flower uses 10 ch behind it and 8 ch in the gap below it. That makes 18 ch per repeat, which is 3.6 in (9.1 cm) at 5 ch per inch.
Tension: Keep the chains relaxed and even. A tight spine cups the flowers forward.
Size checkpoint: Measure down from the loop top:
| Section | Length |
|---|---|
| Hanging loop (folded) | 1.6 in (4.1 cm) |
| Stem | 1.6 in (4.1 cm) |
| Flower 1 | 2 in (5.1 cm) |
| Flowers 2–21 (20 x 3.6 in) | 72 in (182.9 cm) |
| Tail | 3 in (7.6 cm) |
| Total | 80.2 in (203.7 cm) |
Border: Side Rails, Crown, and Swags
On this curtain, each strand’s border is its pair of side rails. The rails use the same chain gauge as the spine: 10 ch = 2 in (5.1 cm).
Left rail:
1. Crown: Join Color C with a sl st at the base of the hanging loop. Ch 20, then sl st in L of Flower 1.
2. Rail segment and swag: Ch 4. For the swag, ch 10, sl st in the 4th ch of the spine gap below this flower, then sl st back along each of the 10 swag ch. Ch 14, then sl st in L of the next flower.
3. Repeat Step 2 down to Flower 21.
4. Tail: Ch 15 and fasten off.
Right rail: Work the same way, joining at each R. The right swag joins the same 4th spine ch as the left swag.
Counts per side:
– Each side has 20 crown ch + 20 segments x (18 rail ch + 10 swag ch + 10 swag sl sts) + 15 tail ch = 795 sts.
– That includes 20 x 18 = 360 rail ch between corners: exactly 18 per flower, with nothing added at the joins.
– Top edge: 16 loop ch and 8 stem ch, with two 20-ch crown chains.
– Bottom edge: three 15-ch tails (the spine and both rails).
Why the math works:
– Rails: The L and R corners are level with B, so each rail segment spans exactly one spine repeat (18 ch = 3.6 in, or 9.1 cm). The rails stay parallel and never pull on the strand.
– Swags: Each swag starts 4 ch below its corner, level with the 4th spine ch, and crosses 1.75 in (4.4 cm). At 10 ch, or 2 in (5.1 cm), it is a little longer than that distance, which gives the gentle droop under each flower.
– Crown: The crown drops 3.6 in (9.1 cm) and runs 1.75 in (4.4 cm) across. That diagonal is about 4 in (10.2 cm), or 20 ch.
Final Blocking
- Lay one strand on the mats, right side up.
- Mist it until it is evenly damp but not soaked.
- Pin the spine straight and check that it measures 80.2 in (203.7 cm) from the loop top to the tail end.
- Pin L and R of every flower 3.5 in (8.9 cm) apart, then pin the rails parallel.
- Open each burgundy shell and pink petal with your fingertips. Pin the 5th dc of each burgundy shell to round the scallop.
- Lift each bobble slightly so it stands up from the pink fan.
- Let the strand dry completely before you unpin it.
- Slide the loops onto the rod in order, spacing them 4 in (10.2 cm) apart center to center.
- Let the curtain hang for a day, then trim any tail that hangs longer than its neighbors back to 15 ch.
Final Quality-Control Checklist
- Every motif measures 3.5 x 2 in (8.9 x 5.1 cm).
- Burgundy Row 4 has 51 sts and pink Row 3 has 41 sts.
- Each spray has 7 stamens, all tacked down.
- Each strand has 21 flowers and measures 80.2 in (203.7 cm).
- Each rail has 795 sts, with 18 ch between corners.
- All 16 hanging loops are the same size.
- All ends are woven in on the back.
Troubleshooting
- Fan curls into a cone: Row 2 or Row 3 is short of increases. Recount to 21 sts and 31 sts.
- Fan ruffles: Your tension is loose. Go down one hook size.
- Petals look lopsided: You skipped the wrong number of sts. Use sk 1 on the pink fan and sk 2 on the burgundy fan.
- Strand twists: Make every spine and rail join from the back.
- Rails bow outward: The rail chains are too loose. Rework them with a smaller hook.
- Strands hang at uneven lengths: Your chain gauge drifted. Re-measure each 18-ch repeat and rework any repeat that is off.
Care
Hand wash in cool water, roll the strands in a towel to remove water, and dry them flat. Re-block if needed, and never hang the curtain while it is wet.

Final Notes
The measurement chain:
– The fans grow from 1.25 in (3.2 cm) to 2 in (5.1 cm), 2.75 in (7.0 cm), and 3.5 in (8.9 cm).
– Each 18-ch spine repeat adds 3.6 in (9.1 cm), and each 18-ch rail segment matches it exactly.
– Twenty-one flowers make an 80.2 in (203.7 cm) strand.
– Sixteen strands spaced 4 in (10.2 cm) apart fill 63.5 in (161.3 cm).
If every checkpoint matches, the curtain hangs straight and even. Happy crocheting!