Sage Lantern Hanging Cotton Pad Holder Crochet Pattern

This lantern-shaped holder keeps a stack of cotton pads tidy on a bathroom hook. You load the pads from the top and pull them out one at a time through a round porthole near the bottom.

It uses two colors. Sage green makes the solid bands, the lattice and the edges, and cream makes the fan shells. The style is soft and slightly vintage, and it suits light bathrooms and natural wood.

The pattern uses US crochet terms. The finished holder is about 3 in (7.6 cm) across and 6 in (15.2 cm) tall in the body. Including the peaked top and the loop, it hangs about 11 3/4 in (29.8 cm) long.

You make five parts: a round base, a tube body with a built-in opening, a peaked top, a covered ring for the opening, and a hanging loop. Every edge that gets joined has 48 stitches, so the parts sew together stitch for stitch.

Finished Size and Construction

  • Finished size: body 3 in (7.6 cm) diameter × 6 in (15.2 cm) tall; 4.8 in (12.2 cm) wide when flattened; 11 3/4 in (29.8 cm) total hanging length
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: DK (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 5 parts joined into one item
  • Layout: stacked vertically: loop, top, body (with ring), base
  • Piece size: body circumference 9.6 in (24.4 cm), 48 sts
  • Size before border: body 5 3/4 in (14.6 cm) tall after the last lace round
  • Border depth: 2 sc rounds, about 3/8 in (1.0 cm)

Materials

Use a smooth, mercerized or combed DK cotton of about 120 m per 50 g (131 yd per 50 g). Cotton holds the lace shape and can be washed often. Avoid fuzzy yarns, because they hide the fan detail.

  • Sage green: 45 g, about 108 m (118 yd)
  • Cream: 35 g, about 84 m (92 yd)

These quantities include a margin of roughly 20%.

Tools

  • 3.5 mm (E-4) crochet hook
  • One plastic ring, 2 in (5.1 cm) inner diameter
  • Tapestry needle
  • 4 stitch markers
  • Scissors
  • Rust-proof pins
  • A jar or rolled towel about 3 in (7.6 cm) wide, for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • sp – space
  • MR – magic ring
  • rep – repeat
  • beg – beginning

Special stitches

  • Fan: 5 dc in the same st.
  • Half fan: 3 dc in the same st, used at the edges of the opening.
  • Small fan: 3 dc in the same st or sp, used only in the top.

Gauge and Checkpoints

  • Sc gauge: 20 sts × 22 rounds = 4 in (10.2 cm).
  • Lace gauge: 12 sts (2 repeats) = 2.4 in (6.1 cm); 4 lace rounds = 1.6 in (4.1 cm).

Make the base first. It is the quickest gauge test.

Checkpoints:

  • Base after Rnd 2: 1.5 in (3.8 cm)
  • Base after Rnd 4: 2.6 in (6.6 cm)
  • Finished base: 3 in (7.6 cm)
  • Body band, flattened: 4.8 in (12.2 cm) wide
  • Body after Lace Rnd 12: 5 3/4 in (14.6 cm) tall
  • Finished body: 6 in (15.2 cm) tall

If your work is too big, go down 0.25 mm in hook size. If it is too small, go up 0.25 mm. Keep the 48-stitch counts unchanged and adjust only the hook.

Crocheted handbag with sage green border and cream lace panel detail on light wood.

Base

Work in joined rounds with the right side facing.

Rnd 1 (sage): MR, ch 3 (counts as dc), 11 dc in ring, join to top of beg ch-3. (12 dc) Fasten off.

Rnd 2 (cream): Join in any st, ch 3, dc in same st, 2 dc in each st around, join. (24 dc) Base measures 1.5 in (3.8 cm).

Rnd 3 (cream): Ch 1, sc in first st, ch 4, skip 1, sc in next st, ch 4, skip 1 11 times, join to first sc. (12 sc + 12 ch-4 sps)

Rnd 4 (cream): Sl st into the first ch-4 sp, ch 3, 3 dc in same sp, 4 dc in each remaining ch-4 sp, join. (48 dc) Base measures 2.6 in (6.6 cm). Fasten off.

Rnd 5 (sage, conversion): Join in any dc, ch 1, sc in each dc around, join. (48 sc + 0 extra = 48 sc)

Rnd 6 (sage): Ch 1, sc in each st around, join. (48 sc) Fasten off, leaving a 24 in (61.0 cm) tail for sewing.

The base measures 3 in (7.6 cm): a sage center, 12 cream petal clusters and a solid sage rim.

Body

Bottom Band (sage)

Foundation: Ch 48 and join with a sl st without twisting the chain.

Band Rnd 1: Ch 1, sc in each ch, join. (48 sc)

Band Rnds 2–5: Ch 1, sc in each st, join. (48 sc)

The band is about 7/8 in (2.2 cm) tall and 4.8 in (12.2 cm) wide flattened. Fasten off.

Number the band stitches 1–48, starting at the first st after the join. Sts 38–48 (11 sts) are the opening at center front, so place markers in st 37 and st 48.

Opening Section (Lace Rnds 1–5)

These are partial rounds worked over sts 1–37 with the right side facing. Do not turn. Fasten off at the end of every row, leaving 4 in (10.2 cm) tails. The ring will cover them later.

Lace Rnd 1 (cream, fan A): Join in st 1, ch 1, sc in st 1, skip 2, Fan in next st, skip 2, sc in next st 6 times. (7 sc + 6 Fans = 37 sts)

Lace Rnd 2 (sage, mesh): Join in first sc, ch 5 (counts as dc + ch 2), sc in center dc of next Fan, ch 2, dc in next sc, ch 2, sc in center dc of next Fan, ch 2 5 times, dc in last sc. (7 dc + 6 sc + 24 ch = 37 sts)

Lace Rnd 3 (cream, fan B): Join in 3rd ch of beg ch-5, ch 3, 2 dc in same st (Half fan), skip ch-2, sc in next sc, skip ch-2, Fan in next dc, skip ch-2, sc in next sc 5 times, skip ch-2, Half fan in last dc. (3 + 25 + 6 sc + 3 = 37 sts)

Lace Rnd 4 (sage, mesh): Join in top of beg ch-3, ch 1, sc in same st, ch 2, dc in next sc, ch 2, sc in center dc of next Fan, ch 2, dc in next sc, ch 2 5 times, sc in last dc. (7 sc + 6 dc + 24 ch = 37 sts)

Lace Rnd 5 (cream, fan A): Join in first sc, ch 1, sc in same st, skip ch-2, Fan in next dc, skip ch-2, sc in next sc 6 times. (7 sc + 6 Fans = 37 sts)

The opening is now 2.2 in (5.6 cm) wide and 2 in (5.1 cm) tall.

Full Rounds (Lace Rnds 6–12)

From here on, don’t fasten off. Drop the color not in use and carry it loosely up the inside.

Lace Rnd 6 (sage, bridge): Join in first sc, ch 5, sc in center dc of next Fan, ch 2, dc in next sc, ch 2, sc in center dc of next Fan, ch 2 5 times, dc in last sc, ch 11, join to 3rd ch of beg ch-5. (37 sts + 11 bridge ch = 48 sts)

Lace Rnd 7 (cream, fan B): Join in the joining st, ch 3, 4 dc in same st, skip ch-2, sc in next sc, skip ch-2, Fan in next dc, skip ch-2, sc in next sc 5 times, skip ch-2, Fan in next dc. Then work across the bridge: sc in 3rd ch, Fan in 6th ch, sc in 9th ch. Join to top of beg ch-3. (8 Fans + 8 sc = 48 sts)

Lace Rnd 8 (sage, mesh): With cream, sl st in next 2 dc. Drop cream and pick up sage. Ch 1, sc in same dc, ch 2, dc in next sc, ch 2, sc in center dc of next Fan, ch 2, dc in next sc, ch 2 7 times, join to first sc. (8 sc + 8 dc + 32 ch = 48 sts)

Lace Rnd 9 (cream, fan A): Ch 1, sc in first sc, skip ch-2, Fan in next dc, skip ch-2, sc in next sc 7 times, skip ch-2, Fan in last dc, join. (8 sc + 8 Fans = 48 sts)

Lace Rnd 10 (sage, mesh): Ch 5, sc in center dc of next Fan, ch 2, dc in next sc, ch 2, sc in center dc of next Fan, ch 2 7 times, join to 3rd ch of beg ch-5. (48 sts)

Lace Rnd 11 (cream, fan B): Ch 3, 4 dc in same st, sc in next sc, Fan in next dc 7 times, sc in last sc, join. Skip all ch-2 sps. (48 sts)

Lace Rnd 12 (sage, mesh): Work as Lace Rnd 8. (48 sts) Fasten off cream.

The body measures 5 3/4 in (14.6 cm) tall.

Peaked Top

Work in joined rounds. Join each new color in the stated stitch and fasten off the old color.

Rnd 1 (sage): MR, ch 1, 8 sc, join. (8 sc)

Rnd 2 (sage): Ch 1, sc in each st, join. (8 sc)

Rnd 3 (cream): Join in any st, ch 3, 2 dc in same st, Small fan in each remaining st, join. (8 Small fans = 24 dc)

Rnd 4 (sage): Join in center dc of any Small fan, ch 1, sc in same st, ch 3, sc in center dc of next Small fan, ch 3 7 times, join. (8 sc + 24 ch = 32 sts)

Rnd 5 (cream): Join in any ch-3 sp, ch 3, 2 dc in same sp, sc in next sc, Small fan in next ch-3 sp, sc in next sc 7 times, join. (24 dc + 8 sc = 32 sts)

Rnd 6 (sage): Join in center dc of any Small fan, ch 1, sc in same st, ch 2, dc in next sc, ch 2, sc in center dc of next Small fan, ch 2, dc in next sc, ch 2 7 times, join. (8 sc + 8 dc + 32 ch = 48 sts)

Rnd 7 (cream): Join in any dc, ch 3, 4 dc in same st, sc in next sc, Fan in next dc, sc in next sc 7 times, join. (48 sts)

Rnd 8 (sage): Join in center dc of any Fan and work as Rnd 6, placing the dc in each sc. (48 sts)

The edge rounds come next, in the Border section. Flattened, the top measures 4.8 in (12.2 cm) wide and 2 3/4 in (7.0 cm) tall.

Opening Ring and Hanging Loop

Ring (sage): Work 36 sc tightly around the plastic ring, pushing the stitches together so no plastic shows. Join and fasten off, leaving an 18 in (45.7 cm) tail. The clear opening is about 1 3/4 in (4.4 cm).

Loop (sage): Ch 31, sc in 2nd ch from hook and in each ch across. (30 sc) The strip is 6 in (15.2 cm) long. Fold it in half to make a 3 in (7.6 cm) loop.

Make All Pieces

Part Colors Quantity
Base sage + cream 1
Body sage + cream 1
Peaked top sage + cream 1
Ring sage 1
Loop sage 1

Layout, from top to bottom:

[ Loop ]
[ Peaked top ]   48 sts
[ Body + ring ]  48 sts top / 48 sts bottom
[ Base ]         48 sts

Joining

Base to body: Hold the base against the foundation edge of the body, wrong sides together. Whipstitch through both loops, joining 1 base st to 1 foundation ch, 48 to 48. Put markers at 12, 24 and 36 on both edges so the stitches stay matched.

Top to body: Match 48 to 48 the same way. Sew only the 24 back stitches, the half opposite the opening. The 24 front stitches stay free as a lid for refilling, and the weight of the lid keeps it closed.

Ring to opening: Center the ring over the opening on the outside. Sew its outer edge through the opening edges, about 9 ring sts per quarter: bottom (band sts), each side, and top (bridge chains). Catch every tail underneath as you sew.

Loop: Sew both ends of the folded strip inside the tip, through Rnds 1–2 of the top.

Keep your whipstitches snug but not tight. The joins should lie flat without puckering.

Size checkpoint: the assembled body is still 9.6 in (24.4 cm) around.

Border

The border is the sage edge on the body and on the top. Border gauge is the sc gauge: 5 sts per 1 in (2.5 cm).

Work these rounds before joining.

Body Edge Rnd 1 (conversion): With sage, ch 1. Sc in each sc and dc (16 sts), then 2 sc in each ch-2 sp (16 sps × 2 = 32). Join. (16 + 32 = 48 sc)

Body Edge Rnd 2: Ch 1, sc in each st, join. (48 sc) Fasten off.

Top Edge Rnds 9–10: Work as Body Edge Rnds 1–2. (48 sc each) Leave a 24 in (61.0 cm) tail.

The pieces are round, so “per side” means each flattened half: 24 sts front and 24 sts back.

Why the math works: each lace repeat is 6 sts wide and there are 8 repeats. The mesh round has 2 sts and 2 ch-2 spaces per repeat, so it converts to 2 + 4 = 6 sc per repeat. That gives exactly 48 sc, the same as the base and the band, so every join is stitch for stitch.

Final Blocking

  1. Dampen all parts with cool water and press out the excess in a towel.
  2. Slide the body over the jar or rolled towel so it stands at 3 in (7.6 cm) across.
  3. Use your fingers to open each Fan into an even arc.
  4. Pin the base flat to 3 in (7.6 cm).
  5. Stuff the top with a paper cone so it dries in a peak.
  6. Let everything dry completely.

Final Quality-Control Checklist

  • Every 48-st edge counts 48.
  • The Fans are offset like brickwork.
  • The opening is centered at the front, above the band.
  • No ring plastic shows through.
  • The base seam is flat.
  • The lid opens and closes cleanly.
  • The loop is secure.
  • All tails are woven in.

Troubleshooting

  • The body flares: your dc are too loose. Go down a hook size for the lace rounds only.
  • The Fans don’t stack: you skipped a sc or dc. Recount 6 sts per repeat.
  • The ring gaps: add more sc and push them together.
  • The base cups: it’s too tight. Block it harder, or go up a hook size.
  • The top won’t peak: your gauge in Rnds 3–5 is loose. Tighten your tension.

Care

Hand wash in cool water and dry flat or over a jar. Remove the plastic ring only if needed.

Sage and cream crocheted tissue holder hanging from a bathroom hook above soap dispenser and flowers on tile wall.

Final Notes

The measurement chain is: base 3 in (7.6 cm), band 4.8 in (12.2 cm) flattened, opening 2.2 × 2 in (5.6 × 5.1 cm), body 6 in (15.2 cm), top 2 3/4 in (7.0 cm), and loop 3 in (7.6 cm). Check each one as you go, and the five parts will fit together on the 48-stitch edges.

Happy crocheting!

Leave a Comment