The Sage Trellis Leaf Curtain is a pair of airy tab-top panels made from cream lace squares, each topped with a sage green three-leaflet leaf. The leaves climb the open mesh like a vine on a garden trellis.
The palette uses just two colors: warm cream for the lace and soft sage green for the leaves. The style is cottage-romantic. All instructions use US crochet terms.
Each finished panel measures 26 in wide x 82 in long (66.0 cm x 208.3 cm) without the tabs. The tab loops add 2.5 in (6.4 cm), for a hanging length of 84.5 in (214.6 cm).
The construction is modular. You make 8 in (20.3 cm) lace squares and sew a leaf onto each one. Then you join 30 squares per panel in a 3 x 10 grid. A scalloped border and seven tabs finish each panel.
Finished Size and Construction
- Finished panel size: 26 in x 82 in (66.0 cm x 208.3 cm), plus 2.5 in (6.4 cm) tab loops
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK (weight 3) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 2 panels; each panel has 30 lace squares, 30 leaves and 7 tabs
- Layout: 3 squares wide x 10 squares long per panel
- Square size: 8 in x 8 in (20.3 cm x 20.3 cm)
- Panel size before border: 24 in x 80 in (61.0 cm x 203.2 cm)
- Border depth: 1 in (2.5 cm) on all four sides
Materials
Choose a smooth mercerized DK cotton. It holds the lace open, resists stretching and washes well. Avoid fuzzy yarns, which blur the mesh.
- Cream (Color A): 1,200 g / approximately 2,640 m (24 balls of 50 g / 110 m)
- Sage green (Color B): 400 g / approximately 880 m (8 balls of 50 g / 110 m)
These quantities cover both panels and include a margin of about 10 percent.
Tools: 4.0 mm (G-6) hook, tapestry needle, stitch markers, rust-proof pins, blocking mats, spray bottle, measuring tape.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
- BLO – back loop only
Eyelet unit: ch 1, sk 1 ch, dc in next ch. This forms the open vein holes in each leaflet.
Corner group: (3 dc, ch 3, 3 dc) in the same corner space.
Gauge and Checkpoints
Gauge: 18 sc = 4 in (10.2 cm) along the final round of a square.
Make one square and one leaf first, block them lightly and measure. The whole curtain depends on this test square.
Square checkpoints (blocked):
- After Round 1: 1.5 in (3.8 cm) across
- After Round 3: 4 in (10.2 cm) side to side
- After Round 5: 7 in (17.8 cm) side to side
- After Round 6: 8 in (20.3 cm) side to side
Leaf checkpoint: about 5 in wide x 5.5 in tall (12.7 cm x 14.0 cm), including the stem.
If your square is too large, go down 0.5 mm in hook size; if it’s too small, go up 0.5 mm. An error of 0.25 in (0.6 cm) per square adds up to 2.5 in (6.4 cm) over 10 squares.

Lace Square (Make 60: 30 per panel)
Use Color A.
Round 1: Make a magic ring. Ch 3 (counts as dc), work 15 dc in the ring, then sl st to the top of the ch-3. (16 dc)
Round 2: Ch 1, sc in same st, ch 5, sk 1 dc, sc in next dc; repeat from * 6 more times, ch 5, sk last dc, sl st to first sc. (8 sc, 8 ch-5 loops)
Round 3 (squaring round): Sl st in first 3 ch of next loop. Ch 3 (counts as dc), (2 dc, ch 3, 3 dc) in same loop. Ch 5, sc in next loop, ch 5, corner group in next loop; repeat from * 2 more times, ch 5, sc in next loop, ch 5, sl st to top of ch-3. (24 dc, 4 sc, 8 ch-5 loops, 4 corner ch-3 sps)
Round 4: Sl st in next 2 dc and into corner sp. Ch 3, (2 dc, ch 3, 3 dc) in same sp. [Ch 5, sc in next ch-5 loop] twice, ch 5, corner group in next corner sp; repeat from * 2 more times, [ch 5, sc in next loop] twice, ch 5, sl st to top of ch-3. (24 dc, 8 sc, 12 ch-5 loops, 4 corner ch-3 sps)
Round 5: Work as Round 4, but work [ch 5, sc in next loop] 3 times on every side before the final ch 5. (24 dc, 12 sc, 16 ch-5 loops, 4 corner ch-3 sps)
Each side now reads: 3 dc, then 4 loops separated by 3 sc, then 3 dc.
Round 6 (trim round): Sl st in next 2 dc and into corner sp. Ch 1, (sc, ch 2, sc) in corner sp. Along each side: sc in each of next 3 dc, [6 sc in next ch-5 loop, sc in next sc] 3 times, 6 sc in next loop, sc in each of next 3 dc. Work (sc, ch 2, sc) in each corner sp. Sl st to first sc. Fasten off.
Per side: 9 sc worked 1-per-existing-stitch (6 dc + 3 sc) + 26 extra sc (24 in loops + 2 corner sc) = 35 sc per side.
Round total: 36 + 104 = 140 sc, 4 corner ch-2 sps.
The 35 sc per side include that side’s 2 corner sc. The ch-2 corner spaces are not counted as stitches.
Leaf (Make 60: 30 per panel)
Use Color B. Each leaf has one large center leaflet and two smaller side leaflets. Each leaflet has a line of eyelets along both sides of its center chain.
Center Leaflet (1 per leaf)
Round 1: Ch 18. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next 2 ch, work 4 eyelet units, hdc in next 2 ch, sc in next ch, (sc, ch 3, sc) in last ch for the tip. Rotate and work along the opposite side of the chain: sc in next ch, hdc in next 2 ch, dc in next ch, ch 1, sk 1 ch; repeat from * 3 more times, dc in next 2 ch, hdc in next ch, sc in next ch, sl st in last ch.
Count: 12 sts + 4 ch-1 sps on each side, plus the tip.
Round 2: Ch 1. Work in BLO for a ridged edge. Sc in each st and ch-1 sp up the first side and in the first tip sc (17 sc). Work (sc, ch 2, sc) in the tip ch-3 sp. Then sc in the second tip sc and in each st and sp down the second side (17 sc). Sl st to first sc. (36 sc, 1 ch-2 tip)
Stem: Do not fasten off. Ch 9, then sl st in 2nd ch from hook and in each ch back (8 sl st). Fasten off with a 12 in (30.5 cm) tail.
Side Leaflets (2 per leaf)
Round 1: Ch 14. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next ch, work 3 eyelet units, hdc in next ch, sc in next ch, (sc, ch 3, sc) in last ch. Along the opposite side: sc in next ch, hdc in next ch, dc in next ch, ch 1, sk 1 ch; repeat from * 2 more times, dc in next ch, hdc in next ch, sc in next ch, sl st in last ch.
Count: 9 sts + 3 ch-1 sps on each side, plus the tip.
Round 2: Ch 1. Working in BLO, sc up the first side through the first tip sc (13 sc), (sc, ch 2, sc) in tip sp, then 13 sc down the second side. Sl st to first sc. (28 sc, 1 ch-2 tip) Fasten off with an 8 in (20.3 cm) tail.
Leaf Assembly
Lay the center leaflet tip up. Tuck a side leaflet behind its base on each side, with the tips angled outward at about 45 degrees. Sew the bases together from the WS.
The center leaflet measures about 3.75 in (9.5 cm), each side leaflet 2.75 in (7.0 cm), and the stem 1.5 in (3.8 cm).
Attach Leaf to Square
Center the leaf on the RS of a blocked square, with the leaflets pointing toward the top edge. Whipstitch the Round 2 edges to the lace, catching only back loops so the stitches stay hidden. Tack down the end of the stem. Leave the leaflet tips loose for 0.5 in (1.3 cm).
Make All Pieces
For both panels you need:
- Color A: 60 lace squares and 14 tabs
- Color B: 60 leaves (60 center leaflets, 120 side leaflets)
Every square gets one leaf, and every leaf points upward. Layout for one panel (M = square with leaf):
Row 1: M M M (top)
Row 2: M M M
Row 3: M M M
Row 4: M M M
Row 5: M M M
Row 6: M M M
Row 7: M M M
Row 8: M M M
Row 9: M M M
Row 10: M M M (bottom)
Joining
Method: Flat slip stitch join. Place two blocked squares side by side, RS up. With Color A, sl st through both corner ch-2 sps. Then work 1 sl st through the back loops of each pair of sc, alternating squares, until all 35 pairs are joined. End with a sl st through the next pair of corner sps.
Stitch-to-stitch logic: Every side has exactly 35 sc, so stitch 1 meets stitch 1 and stitch 35 meets stitch 35.
Join the squares into 10 rows of 3, then join the rows along the long seams. Where four corners meet, carry the yarn across without adding stitches.
Tension: Keep the slip stitches as loose as the sc they connect. If they are tight, join with a hook 0.5 mm larger.
Size checkpoint: A joined row of 3 squares measures 24 in (61.0 cm). The joined panel measures 24 in x 80 in (61.0 cm x 203.2 cm).
Border
Border gauge: 18 sc = 4 in (10.2 cm), the same as the squares. Use Color A with the RS facing.
Round 1: Join in a corner sp. Ch 1, (sc, ch 2, sc) in corner sp. Along each side: sc in each sc (35 per square), and 1 sc in each seam point where two joined corner sps meet. Work (sc, ch 2, sc) in each outer corner sp. Sl st to first sc.
- Short sides: 1 corner sc + (3 x 35 = 105) + 2 seam sc + 1 corner sc = 109 sc
- Long sides: 1 corner sc + (10 x 35 = 350) + 9 seam sc + 1 corner sc = 361 sc
- Round total: 2 x 109 + 2 x 361 = 940 sc, 4 corner ch-2 sps
Round 2: Sl st into corner sp. Ch 1, (sc, ch 3, sc) in corner sp. Along each side: sc in first sc, ch 3, sk 1 sc, sc in next sc; repeat from * to the corner. Work (sc, ch 3, sc) in each corner sp. Sl st to first sc.
- Short sides: 54 ch-3 loops
- Long sides: 180 ch-3 loops
- Round total: 468 side loops + 4 corner loops
Round 3: In each corner loop work (sc, hdc, 3 dc, hdc, sc). In each side loop work (sc, hdc, dc, hdc, sc). Sl st to first sc. Fasten off. (54 scallops per short side, 180 per long side, 4 corner scallops)
Why the math works: Round 2 uses 1 starting sc plus 2 sts per repeat, so an odd side count divides evenly: (109 – 1) / 2 = 54 and (361 – 1) / 2 = 180. At 4.5 sc per inch, 109 sc covers 24.2 in (61.5 cm) and 361 sc covers 80.2 in (203.7 cm), which matches the joined panel. Rounds 1–2 add 0.5 in (1.3 cm) and Round 3 adds 0.5 in (1.3 cm), for 1 in (2.5 cm) per side.
Tabs (Make 14: 7 per panel)
With Color A, ch 10. Row 1: Sc in 2nd ch from hook and in each ch across, turn. (9 sc) Rows 2–35: Ch 1, sc in each sc, turn. (9 sc) Fasten off with a long tail. Each tab measures 2 in x 7 in (5.1 cm x 17.8 cm).
Fold each tab in half to 3.5 in (8.9 cm). Whipstitch both ends 1 in (2.5 cm) down the WS of the top border, leaving a 2.5 in (6.4 cm) loop. Place a tab at each top corner and space the rest 2 in (5.1 cm) apart: 7 tabs x 2 in + 6 gaps x 2 in = 26 in (66.0 cm).
Final Blocking
- Weave in all ends through solid sc areas.
- Soak the panel in cool water for 15 minutes. Press out the water without wringing, then roll the panel in towels.
- Lay it flat on mats and pin the corners to 26 in x 82 in (66.0 cm x 208.3 cm).
- Pin along each edge every 4 in (10.2 cm), then pin out each scallop.
- Smooth each leaf and open the eyelets with your fingertips.
- Let the panel dry completely before unpinning.
Final Quality-Control Checklist
- Every square measures 8 in (20.3 cm) and has 35 sc per side.
- Every leaf is centered, points upward and is securely sewn.
- Seams lie flat without puckering.
- Border counts: 109 sc and 54 scallops per short side; 361 sc and 180 scallops per long side.
- Tabs are evenly spaced and sewn through both layers.
- Both panels measure 26 in x 82 in (66.0 cm x 208.3 cm).
Troubleshooting
- Square cups: The loops are too short. Chain more loosely or go up a hook size.
- Square ruffles: The loops are too long. Chain more firmly or go down a hook size.
- Leaf curls: Steam-block it before sewing, and check that Round 2 was worked in BLO.
- Side count is off: Recount the 6 sc in each loop on Round 6.
- Border waves: Check that you worked exactly 1 sc per seam point.
- Panel stretches when hung: Re-block, dry flat, and never hang the panel wet.
Care
Hand wash in cool water with mild detergent, or machine wash on a delicate cycle in a mesh bag. Dry flat and re-pin the scallops if needed.

Final Notes
The measurement chain is simple. 35 sc per side gives an 8 in (20.3 cm) square. Three squares make 24 in (61.0 cm) across, and ten make 80 in (203.2 cm) down. A 1 in (2.5 cm) border brings each panel to 26 in x 82 in (66.0 cm x 208.3 cm), and the tabs add a 2.5 in (6.4 cm) loop. Check your gauge at each stage so both panels match.
Happy crocheting!