Scalloped Pine Fan Christmas Tree Ornament Crochet Pattern

This little tree is made from six rounded fan shells stacked in three tiers: three fans on the bottom, two in the middle and one on top. Small diamond-shaped openings form where the tiers meet. A short, solid brown trunk sits centered under the bottom tier, and a chain loop at the tip lets the tree hang straight from a branch.

The colors are simple and natural: soft cream cotton for the fans and warm cinnamon brown for the trunk. The style is rustic and Scandinavian. The ornament works on a tree, as a gift tag or on a window hook.

All instructions use US crochet terms. The finished ornament is about 5 in (12.7 cm) wide and 4.25 in (10.8 cm) tall without the loop. The hanging loop adds about 2 in (5.1 cm), for a total hanging height of about 6.25 in (15.9 cm).

The piece is worked flat and goes quickly. First you crochet the brown trunk as a small single crochet rectangle. Next you add a cream foundation row across the top of the trunk, with chain extensions on each side. Then you work the three fan tiers and finish with one edging row that outlines the scallops, shapes the tip and adds the hanging loop.

Finished Size and Construction

  • Finished size: about 5 in (12.7 cm) wide x 4.25 in (10.8 cm) tall, plus a 2 in (5.1 cm) loop
  • Skill level: easy (advanced beginner)
  • Terminology: US terms
  • Yarn weight: worsted (#4) cotton
  • Hook: 5.0 mm (US H-8)
  • Number of pieces: 1 single piece, worked flat, with nothing to sew together
  • Layout: 3 tiers of fans (3, 2, 1) on a 19-stitch foundation, with the trunk centered underneath
  • Piece size: trunk 1.25 in (3.2 cm) wide x 1.3 in (3.3 cm) tall; each fan about 1.5 in (3.8 cm) wide
  • Size before border: about 4.75 in (12.1 cm) wide x 4.1 in (10.4 cm) tall
  • Border depth: 1 row of single crochet, about 0.125 in (0.3 cm)

Materials

Choose a smooth mercerized or combed cotton in worsted weight. Cotton holds the fan shape crisply and blocks well. Avoid fuzzy or loosely plied yarn, because clear stitches in the fans are the main feature of this design.

  • Cream (fans, edging, loop): 12 g, about 20 m (22 yd)
  • Brown (trunk): 4 g, about 7 m (8 yd)

These amounts include a margin of about 25 percent for testing gauge, joining and weaving in ends. One ornament uses very little yarn, so it is a good way to use up leftovers.

Tools:

  • 5.0 mm (US H-8) crochet hook
  • Tapestry needle
  • Scissors
  • Rustproof pins
  • Blocking mat or folded towel
  • Spray bottle with cool water
  • Ruler or tape measure

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • st(s) – stitch(es)
  • RS – right side
  • fan – 7 dc worked in the same stitch

Special stitch – standing sc: With a slip knot on your hook, insert the hook into the stitch, yarn over and pull up a loop, then yarn over and draw through both loops. This joins new yarn and makes a sc in one step, with no turning chain to show.

Gauge and Checkpoints

Gauge: 16 sc and 18 rows = 4 in (10.2 cm) in sc, worked flat with the 5.0 mm hook.

Gauge is not critical for an ornament, but it controls the finished size and how flat the fans lie. You don’t need a separate swatch: make the trunk first and use it as your test piece. If it matches, the rest of the tree will match too.

Checkpoints:

  • Trunk (after Row 6): 1.25 in (3.2 cm) wide x 1.3 in (3.3 cm) tall
  • Foundation (after Row 2): 4.75 in (12.1 cm) wide
  • After Row 3: about 2.6 in (6.6 cm) tall from the bottom of the trunk to the tops of the fans
  • After Row 4: about 3.4 in (8.6 cm) tall
  • After Row 5: about 4.1 in (10.4 cm) tall
  • After the border: about 5 in (12.7 cm) wide x 4.25 in (10.8 cm) tall

If your piece is too big: go down to a 4.5 mm (US 7) hook. If the fans ruffle or cup, your dc are too loose compared with your sc, so try a smaller hook for the fan rows only.

If your piece is too small: go up to a 5.5 mm (US I-9) hook. If the fans pull the foundation into a curve, your dc are too tight. Relax your yarn-over tension and pull each dc up to full height.

Cream-colored macramé ornament with a heart-shaped hole, hanging from braided cords against a blurred tan background.

Pattern

Trunk (Brown)

Row 1: With brown, ch 6. Sc in 2nd ch from hook and in each ch across. (5 sc)

Rows 2–6: Ch 1, turn. Sc in each st across. (5 sc)

Fasten off and weave in the tail. The trunk is a firm rectangle, 1.25 in (3.2 cm) wide x 1.3 in (3.3 cm) tall. Keep Row 6 at the top, because the cream foundation is worked into it.

Foundation (Cream)

Row 1: With cream, make a slip knot and ch 7. Hold the trunk with Row 6 at the top. Sc in the first st of Row 6, sc in the next 4 sts, then ch 8. (7 ch, 5 sc, 8 ch)

The first 7 ch hang free to the left of the trunk, and the last 8 ch extend to the right. Chain loosely so the chain extensions are as wide as the stitches over the trunk.

Row 2: Turn. Sc in 2nd ch from hook and in the next 6 ch (7 sc). Sc in each of the 5 sc over the trunk (5 sc). Then sc in each of the 7 ch on the other side (7 sc). (19 sc)

The trunk now sits centered under sts 8 through 12. Measure the row: it should be 4.75 in (12.1 cm) wide. If it pulls in, the chains were too tight, so redo Row 1 with a looser chain.

Row 3 – Bottom Tier (3 Fans)

Row 3: Ch 1, turn. Sc in first st, [sk 2 sts, 7 dc in next st, sk 2 sts, sc in next st] 3 times. (3 fans, 4 sc; 25 sts)

Here is where each stitch goes in the 19 foundation sts: sc in st 1, fan in st 4, sc in st 7, fan in st 10, sc in st 13, fan in st 16, sc in st 19. The middle fan sits on st 10, directly over the center of the trunk.

Pull each dc up to full height before you finish it. Even dc heights give each fan a smooth, round top edge.

Fasten off. The side now facing you is the RS. Each fan should be a half circle about 1.5 in (3.8 cm) wide, narrowing to a point at the foundation.

Row 4 – Middle Tier (2 Fans)

Row 4: With RS facing, join cream with a standing sc in the 4th (center) dc of the first fan. [Sk 3 dc, 7 dc in the next sc, sk 3 dc, sc in the 4th dc of the next fan] 2 times. (2 fans, 3 sc; 17 sts)

Each new fan is worked into the sc between two lower fans, so its base rests where those fans meet. You skip the last 3 dc of one fan and the first 3 dc of the next, which leaves a small diamond-shaped opening under each new fan. Fasten off.

This tier is about 3 in (7.6 cm) wide, measured from the outer edge of one fan to the outer edge of the other.

Row 5 – Top Tier (1 Fan)

Row 5: With RS facing, join cream with a standing sc in the 4th dc of the first fan of Row 4. Sk 3 dc, 7 dc in the next sc, sk 3 dc, sc in the 4th dc of the next fan. (1 fan, 2 sc; 9 sts)

Fasten off. The piece should now measure about 4.75 in (12.1 cm) wide and 4.1 in (10.4 cm) tall, and the outline should already look like a triangle with scalloped sides.

Weave in all the cream tails from Rows 3–5 now, on the wrong side. Run each tail through stitches of its own tier so it doesn’t show through the diamond openings.

Border

Border gauge: Work 1 sc into each stitch top and 1 sc into each row end, at the same 16 sc = 4 in (10.2 cm) tension as the trunk. Don’t chain between stitches.

The border is one continuous row, worked with RS facing. It starts at the left side of the trunk, runs along the bottom, up the left side, over the tip and down the right side, and ends at the right side of the trunk. The brown trunk itself is not edged.

Border Row: Join cream with a standing sc in the free loop of the foundation ch right next to the left side of the trunk.

  • Bottom left: sc in the free loops of the next 6 ch. (7 sc)
  • Left side: sc in the end of foundation Row 2, sc in the end sc of Row 3, sc in each of the 3 outer dc of the bottom fan, sc in the end sc of Row 4, sc in each of the 3 outer dc of the middle fan, sc in the end sc of Row 5. (10 sc)
  • Top fan: sc in each of the first 3 dc, 3 sc in the 4th (center) dc, sc in each of the last 3 dc. (9 sc)
  • Right side: sc in the end sc of Row 5, sc in each of the 3 outer dc of the middle fan, sc in the end sc of Row 4, sc in each of the 3 outer dc of the bottom fan, sc in the end sc of Row 3, sc in the end of foundation Row 2. (10 sc)
  • Bottom right: sc in the free loops of the 7 foundation ch, ending next to the trunk. (7 sc)

Total: 7 + 10 + 9 + 10 + 7 = 43 sc. Fasten off.

Hanging loop: Join cream with a sl st in the center sc of the 3-sc group at the tip. Ch 20, then sl st in the same st. Fasten off. The loop should rise about 2 in (5.1 cm) above the tip.

Why the math works: Every fan has 7 dc, and its center (4th) dc is always covered by an sc from the next tier. That leaves exactly 3 outer dc showing on the outside of each fan at the edge. So each side gets 3 + 1 + 3 + 1 stitches plus 2 row ends, for 10 sc. Working 1 sc per stitch keeps the scallops from ruffling. The 3 sc in the top center dc add just enough length to turn a sharp corner and make a pointed tip. The 7 free chain loops on each side of the trunk match the 7 sc of foundation Row 2 on that side, so the bottom edge stays straight.

Final Blocking

  1. Weave in all remaining ends, each one through stitches of the same color.
  2. Spray the ornament lightly with cool water until it is damp but not soaked.
  3. Lay it RS up on the blocking mat.
  4. Pin the foundation in a straight line 4.75 in (12.1 cm) long.
  5. Pin the tip so the total height is 4.25 in (10.8 cm). Then pin the bottom corners so the width is 5 in (12.7 cm).
  6. Shape each fan into a smooth half circle with your fingers, and pin at the outer dc if needed.
  7. Gently open each diamond-shaped gap with a fingertip.
  8. Pin the trunk square, centered under the middle fan.
  9. Let the ornament dry completely, then remove the pins. For a stiffer ornament, spray it lightly with starch before it dries.

Final Quality-Control Checklist

  • The trunk has 5 sc across and 6 rows.
  • Foundation Row 2 has 19 sc, and the trunk sits under sts 8–12.
  • Row 3 has 3 fans of 7 dc each.
  • Row 4 has 2 fans, and Row 5 has 1 fan.
  • Two diamond-shaped openings show between the tiers.
  • The border has 43 sc: 7 + 10 + 9 + 10 + 7.
  • The tip is pointed, and the loop is centered on it.
  • The ornament measures about 5 in (12.7 cm) x 4.25 in (10.8 cm) and hangs straight.

Troubleshooting

Fans cup or ruffle: Your dc are too loose. Use a hook one size smaller for the fan rows.

Fans pull the foundation into an arch: Your dc are too tight, or a skip count is off. Check the stitch placement in Row 3 again.

The tree leans to one side: The trunk is not centered. Make sure Row 2 has 7 sts on each side of the 5 trunk sts.

Diamond-shaped gaps are closed or uneven: Skip exactly 3 dc on each side of every new fan.

The tip is rounded: You worked only 1 or 2 sc in the center dc of the top fan. Work 3 sc there.

The ornament hangs crooked: The loop is off-center. Remove it and rejoin in the center sc of the 3-sc group at the tip.

Care

Hand wash in cool water with mild soap, roll it in a towel to press out the water, and dry it flat, reshaping the fans. Store it flat or wrapped in tissue so the tip and scallops stay crisp.

Cream crocheted tree ornament with brown trunk hanging from evergreen branch amid warm fairy lights and holiday decorations.

Final Notes

Each measurement leads to the next. The 5-stitch trunk at 1.25 in (3.2 cm) confirms your gauge. The 19-stitch foundation at 4.75 in (12.1 cm) sets the width. Three tiers of 7-dc fans bring the height to 4.1 in (10.4 cm). One 43-stitch border row brings the tree to 5 in (12.7 cm) wide and 4.25 in (10.8 cm) tall, and a 20-chain loop finishes it. If you check each number as you go, every tree in a batch will match.

Happy crocheting!

Leave a Comment