This three-tier hanging holder stores spare toilet rolls and adds some soft lace to a bathroom wall. Each tier is a short round basket with a solid cream base, a lace band of aqua wheel motifs and a scalloped cream top edge. Three aqua straps link the tiers and gather at a gold ring that hangs from any hook.
The colors are calm and coastal: a warm cream for the structure and lace, and a muted seafoam aqua for the wheel centers and straps. The style sits between vintage doily and modern bathroom decor.
This pattern uses US crochet terms. Each finished tier measures about 6.1 in (15.5 cm) across and 4 in (10.2 cm) tall. The assembled holder hangs about 22 in (55.9 cm) from the top ring to the bottom of the lowest tier.
To build it, you crochet three flat bases and 24 small wheel motifs. You join the motifs as you go into three rings of 8. Then you add edging rounds to each ring, join each band to a base with single crochet, crochet three straps lengthwise and sew everything to the rings.
Finished Size and Construction
- Tier size: 6.1 in (15.5 cm) diameter, 4 in (10.2 cm) tall
- Hanging length: about 22 in (55.9 cm) from ring to bottom
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK / light worsted (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 3 bases, 24 wheel motifs (3 bands of 8), 3 straps
- Layout: 8 motifs in a closed ring per band, 3 tiers stacked vertically
- Motif size: 2.4 in (6.1 cm) across
- Band size before edging: 19.2 in (48.8 cm) around, 2.4 in (6.1 cm) tall
- Edging depth: about 0.4 in (1.0 cm) at the bottom plus a 0.2 in (0.5 cm) joining ridge, and about 1 in (2.5 cm) at the top
Materials
Use a smooth mercerized or combed cotton. It holds the lace open, keeps the scallops crisp and copes with bathroom humidity. Avoid fuzzy or very stretchy yarns, because the baskets need to keep their shape when they hold rolls.
- Cream: 150 g, about 360 m (bases, motif lattice, edgings)
- Seafoam aqua: 100 g, about 240 m (motif centers, straps)
These quantities include a margin of about 25% for gauge differences and swatching.
Tools:
– 3.5 mm (E-4) crochet hook
– 1 metal ring, 2 in (5.1 cm) inner diameter
– 3 small metal rings, 1 in (2.5 cm) inner diameter
– Tapestry needle
– Stitch markers
– Scissors
– Blocking mat and rustproof pins
– Spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- sc2tog – single crochet 2 together
- blo – back loop only
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Special stitch – Shell scallop: Work 7 dc in the same stitch.
Joining loop (join-as-you-go): Ch 2, sl st in the center of the matching ch-5 loop on the neighboring motif, ch 2. This replaces the ch 5 of a normal loop.
Gauge and Checkpoints
Base gauge: 20 sc and 22 rounds = 4 in (10.2 cm), which is 5 sc per inch.
Before you make all the pieces, make one motif and one base, then check them:
- Motif after Rnd 1: 1 in (2.5 cm) across
- Motif after Rnd 2: 1.75 in (4.4 cm) across
- Motif after Rnd 3: 2 in (5.1 cm) across
- Motif after Rnd 4: 2.4 in (6.1 cm) across, measured between the tips of opposite loops
- Base after Rnd 16: about 6.1 in (15.5 cm) across, 96 sts
The motif and base must match: 8 motifs × 2.4 in = 19.2 in (48.8 cm), and 96 sc ÷ 5 per inch = 19.2 in (48.8 cm).
If your motif is too big, go down 0.5 mm. If it’s too small, go up 0.5 mm. If only the base is off, change the hook for the bases alone so that the base edge measures 19.2 in (48.8 cm) around.

Base (make 3, cream)
Work in continuous rounds. Place a marker in the first stitch of each round.
Rnd 1: Magic ring, 6 sc in ring. (6 sts)
Rnd 2: 2 sc in each st. (12 sts)
Rnd 3: [Sc 1, 2 sc in next] 6 times. (18 sts)
Rnd 4: [Sc 2, 2 sc in next] 6 times. (24 sts)
Rnd 5: [Sc 3, 2 sc in next] 6 times. (30 sts)
Rnd 6: [Sc 4, 2 sc in next] 6 times. (36 sts)
Rnds 7–16: Keep increasing by 6 sts per round, working 1 more sc between increases each time. Shift the increase position by half a repeat on alternate rounds so the circle stays round.
Counts: Rnd 7 has 42 sts, Rnd 8 has 48, Rnd 9 has 54, Rnd 10 has 60, Rnd 11 has 66, Rnd 12 has 72, Rnd 13 has 78, Rnd 14 has 84, Rnd 15 has 90 and Rnd 16 has 96 sts.
Sl st to the next st and fasten off, leaving a 6 in (15.2 cm) tail.
Checkpoint: The base lies flat with no ruffling or cupping and measures about 6.1 in (15.5 cm) across.
Wheel Motif (make 24)
Rnd 1 (aqua): Ch 4, sl st to form a ring. Ch 3 (counts as dc), 15 dc in ring. Sl st to the top of ch-3. (16 dc)
Rnd 2 (aqua): Ch 5 (counts as tr + ch 1), [tr in next dc, ch 1] 15 times. Sl st to the 4th ch of the beginning ch-5. (16 tr, 16 ch-1 sps)
These tall stitches form the aqua spokes of the wheel. Fasten off aqua.
Rnd 3 (cream): Join cream in any ch-1 sp. [Sc in ch-1 sp, ch 3] 16 times. Sl st to the first sc. (16 ch-3 loops)
Rnd 4 (cream): Sl st to the center of the next ch-3 loop. Sc in the same loop. [Ch 5, sk next ch-3 loop, sc in next ch-3 loop] 7 times. Ch 5, sk the last loop and sl st to the first sc. (8 sc, 8 ch-5 loops)
Number the ch-5 loops 1 to 8 clockwise, as if the motif were an octagon:
- Loops 1 and 2 form the top
- Loops 3 and 4 form the right side
- Loops 5 and 6 form the bottom
- Loops 7 and 8 form the left side
The sc between two loops of the same side is the center sc of that side. The sc between two sides is a corner sc.
Joining as you go
Complete Motif 1.
For Motifs 2–8, work Rnd 4 as normal, but replace loops 7 and 8 with joining loops. Each joining loop attaches to the matching right-side loop of the previous motif: loop 7 joins to loop 4 and loop 8 joins to loop 3.
For Motif 8, also replace loops 3 and 4 with joining loops to Motif 1: loop 3 joins to Motif 1’s loop 8, and loop 4 joins to Motif 1’s loop 7. This closes the ring. Check that the strip isn’t twisted before you work these joins.
Weave in all ends.
Make All Pieces
Totals:
– 3 bases (cream)
– 24 motifs (aqua Rnds 1–2, cream Rnds 3–4), joined into 3 rings of 8
– 3 straps (aqua)
One band, opened flat (the M8 → M1 join closes the ring):
[M1]-[M2]-[M3]-[M4]-[M5]-[M6]-[M7]-[M8]-(back to M1)
J1 J2 J3 J4 J5 J6 J7 J8
J1 is the junction between M8 and M1, J2 is between M1 and M2, and so on around the ring.
Joining
Each motif joins to its neighbors at 2 loops per side, so each band has 8 two-loop seams. The joining sl st sits in the exact center of the neighbor’s loop. This keeps the loops symmetrical and the wheels evenly spaced.
Tension: Make the ch 2 on each side of the joining sl st the same tension as your normal chains. If you pull them tight, the band draws in and the scallops won’t line up.
Checkpoint: Lay the ring flat as a doubled strip. It should measure 9.6 in (24.4 cm) end to end, which is 19.2 in (48.8 cm) around.
Border (Band Edgings)
Edging gauge: 5 sc per inch, the same as the base.
Edge stitch math: Each motif edge takes 5 sc in each of its 2 edge loops plus 1 sc in its center sc, which is 11 sts. Each junction takes 1 sc2tog worked over the 2 corner sc that meet there (one from each motif), which is 1 st.
A closed ring has 8 motifs and 8 junctions, so the count is (8 × 11) + (8 × 1) = 96 sts. That’s the same as the base and as Rnd 16. No other stitches are added at the seams.
Bottom edging (cream)
Rnd 1: Join with sc2tog at J1 over the 2 corner sc. Then for each motif: 5 sc in loop 5, sc in the center sc, 5 sc in loop 6, and sc2tog at the next junction. Repeat around and sl st to the first st. (96 sts)
Rnd 2: Ch 1, sc in each st. Sl st to the first sc. (96 sts) Fasten off.
Join band to base
Hold the base under the band with WS together and RS out. Match the stitches 1-to-1 and place markers at every 12th st on both pieces.
Join cream through both layers. Sc in each pair of sts around (96 sc) and sl st to the first sc. This forms the raised ridge along the bottom edge.
Top edging (cream)
Turn the basket upside down and work into loops 1 and 2 of each motif.
Rnd 1: Use the same layout as bottom Rnd 1: 5 sc per loop, 1 sc per center sc and 1 sc2tog per junction. (96 sts)
Rnd 2: Ch 2 (does not count as a st), hdc in each st. Sl st to the first hdc. (96 sts)
Rnd 3: Sc in the first st. [Sk 2, shell scallop in next, sk 2, sc in next] 15 times. Sk 2, shell scallop in next, sk 2. Sl st to the first sc. (16 scallops, 16 sc)
Each repeat uses 6 sts, so 16 × 6 = 96. This is why the scallops close perfectly with no partial shell. Each motif carries exactly 2 scallops (12 sts ÷ 6), so the scallops line up with the wheels.
Checkpoint: The tier is about 4 in (10.2 cm) tall: 2.4 in (6.1 cm) of motif, 0.4 in (1.0 cm) of bottom edging, 0.2 in (0.5 cm) of joining ridge and about 1 in (2.5 cm) of top edging.
Straps (make 3, aqua)
Row 1: Ch 121, sc in the 2nd ch from the hook and in each ch across. (120 sts)
Rows 2–5: Ch 1, turn, sc blo in each st. (120 sts)
Fasten off. Each strap measures 24 in (61.0 cm) by 0.9 in (2.3 cm). Working in the back loop gives the straps their fine lengthwise ridges.
Assembly
- Fold 1 in (2.5 cm) at one end of each strap around a small ring and sew it down securely.
- Choose the side and back positions on each tier. The side straps go at junctions J1 and J5, which are opposite each other. The back strap goes at J3.
- Pin the bottom tier so its lower edge is level with the bottom fold of each strap.
- Leave a 2 in (5.1 cm) gap, pin the middle tier, leave another 2 in (5.1 cm) gap and pin the top tier.
- Whipstitch each strap to each tier along the full 4 in (10.2 cm) band height with matching aqua yarn. Stitch through the bottom ridge, the motif junction and the top hdc round.
- Pass all three strap tops through the large ring, fold 1 in (2.5 cm) down and sew securely. The free strap length above the top tier is 6 in (15.2 cm).
The total strap length checks out: 1 in (2.5 cm) fold + 12 in (30.5 cm) of tiers + 4 in (10.2 cm) of gaps + 6 in (15.2 cm) above the top tier + 1 in (2.5 cm) fold = 24 in (61.0 cm).
Final Blocking
- Lightly mist each tier with water until it’s damp but not soaked.
- Stuff the tier with a towel-wrapped toilet roll so it holds a round shape.
- Pin each scallop on its shell’s center dc so it stands upright.
- Gently open each wheel so the spokes sit evenly spaced.
- Lay the straps flat and pin them straight at 0.9 in (2.3 cm) wide.
- Let everything dry completely before you remove the pins and rolls.
Final Quality-Control Checklist
- Each base measures 6.1 in (15.5 cm) across and lies flat.
- All bands have 96 sts in each edging round.
- There are 16 scallops per tier and 2 above each motif.
- No band is twisted, and all 8 wheels face outward.
- The tiers are evenly spaced 2 in (5.1 cm) apart.
- The side straps are exactly opposite each other.
- The ring seams are sewn through several layers.
- All ends are woven in securely.
- The holder hangs straight under the weight of three rolls.
Troubleshooting
- The base cups: Your tension is too tight on the increase rounds. Go up 0.5 mm for the base only.
- The base ruffles: Check your counts. Each round should add exactly 6 sts.
- The band is bigger than the base: Your joining chains are loose. Redo the joins with even ch-2s, or go down a hook size for Rnd 4.
- The scallops don’t close evenly: Your edging count isn’t 96. Recount bottom and top Rnd 1 per motif: 11 sts plus 1 per junction.
- The tiers tilt: The straps are sewn at uneven heights. Re-pin them, measuring each gap from the bottom ridge.
- The wheels look crowded: Block the motifs on their own before joining.
Care
Hand wash cool with mild soap, press out the water in a towel and reshape to dry flat. Don’t wring the straps or hang the holder while it’s wet.

Final Notes
Your measurements build on each other, so check them at every stage:
- A 2.4 in (6.1 cm) motif makes a 19.2 in (48.8 cm) ring of 8.
- That ring gives 96 edge sts, which matches the 96-st base.
- Four inches (10.2 cm) of tier height and 2 in (5.1 cm) gaps fit exactly on 24 in (61.0 cm) straps.
If each checkpoint is right, the next stage will fit without forcing.
Happy crocheting!