Seashell Lace Three-Tier Hanging Basket Crochet Pattern

This hanging organizer has three round teal baskets stacked one above another. Each basket has a solid base, an open wall of fan stitches and a cream scalloped rim. Two cream straps run through wooden rings on both sides of each basket and meet at a single loop for a hook or peg. Each basket holds one standard toilet roll, but the holder works just as well for washcloths, soaps or small plants.

The teal and cream look calm and a little coastal, and it fits a bathroom, laundry room or nursery. The fans are worked with short chain spaces, so the baskets look light without being floppy. The solid rim rounds keep each basket round under load.

This pattern uses US crochet terms. Each finished basket measures 5.75 in (14.6 cm) in diameter and 3.75 in (9.5 cm) tall. The assembled holder hangs 22 in (55.9 cm) from the top of the loop to the bottom of the lowest basket.

Here is the construction in short. You work each basket from the center of the base outward in joined rounds, turn the wall up through the back loops, and add two tiers of fans and a solid rim round. Then you add a cream scallop border. You make the straps flat, in two rows. Finally you sew on the rings, thread the straps through and tack everything in place.

Finished Size and Construction

  • Basket size: 5.75 in (14.6 cm) diameter × 3.75 in (9.5 cm) tall
  • Assembled length: 22 in (55.9 cm), loop top to lowest basket base
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: #4 worsted cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 3 baskets, 2 straps, 6 wooden rings
  • Layout: 1 column of 3 baskets, rings at opposite sides
  • Basket size before border: 5.75 in (14.6 cm) × 3 in (7.6 cm) tall
  • Border depth: 0.75 in (1.9 cm)

Materials

Use 100% cotton or a cotton blend in worsted weight. Cotton holds its shape, takes humidity well and doesn’t fuzz.

  • Teal (main color): 150 g, about 255 m (279 yd)
  • Cream (border and straps): 50 g, about 85 m (93 yd)
  • 6 wooden rings, 1.5 in (3.8 cm) outer diameter
  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • Stitch marker
  • Scissors
  • Measuring tape
  • Rustproof pins and a blocking mat

The quantities include a margin of roughly 20% for swatching and gauge differences.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • BLO – back loop only
  • MR – magic ring
  • st(s) – stitch(es)

Special stitches

  • V-st: (dc, ch 1, dc) in the same stitch.
  • Fan: [dc, (ch 1, dc) 5 times] in the same space. This makes 6 dc and 5 ch-1 spaces. The center space is the 3rd one.
  • Scallop: 5 dc in the same stitch.

Gauge and Checkpoints

Gauge: 16 sc and 16 rounds = 4 in (10.2 cm) in teal, worked tightly. One dc round measures about 0.5 in (1.3 cm) tall.

Make one complete basket first and check it against the measurements below before you start the other two.

  • After Rnd 6 (36 sts): base about 2.9 in (7.4 cm) across.
  • After Rnd 12 (72 sts): base 5.75 in (14.6 cm) across, or 18 in (45.7 cm) around.
  • After Rnd 15: wall 0.75 in (1.9 cm) tall.
  • After Rnd 19: wall 2.75 in (7.0 cm) tall.
  • After Rnd 20: wall 3 in (7.6 cm) tall.
  • After the border: basket 3.75 in (9.5 cm) tall.

If the base is too big or ripples, go down half a hook size. If it’s too small or cups upward, go up half a size. A base that is 0.25 in (0.6 cm) off is fine. Anything more changes how the roll fits.

Crocheted basket in teal and cream with openwork pattern, wooden ring handle, and white cord.

Basket (make 3)

Join every round with a sl st to the first stitch. The ch 1 at the start of a round never counts as a stitch. Place a marker in the first stitch of each round.

Base

With teal, make a MR.

Rnd 1: Ch 1, 6 sc in ring, join. (6 sts)

Rnd 2: Ch 1, 2 sc in each st around, join. (12 sts)

Rnd 3: Ch 1, sc in next st, 2 sc in next st, repeat 6 times, join. (18 sts)

Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st, repeat 6 times, join. (24 sts)

Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st, repeat 6 times, join. (30 sts)

Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st, repeat 6 times, join. (36 sts)

Rnds 7–12: Keep adding 1 more sc between increases in each round. Rnd 7 has 42 sts, Rnd 8 has 48, Rnd 9 has 54, Rnd 10 has 60, Rnd 11 has 66 and Rnd 12 has 72 sts. In Rnd 12 the repeat is sc in next 10 sts, 2 sc in next st.

Checkpoint: the base lies flat at 5.75 in (14.6 cm) across.

To keep the base round, you can shift the increases so they don’t line up. On even-numbered rounds, start each repeat with half the plain sc, then the increase, then the rest of the plain sc.

Wall: Solid Band

Rnd 13 (turning round): Ch 1, sc in BLO of each st around, join. (72 sts)

The unused front loops make a neat ridge, and the wall starts to rise.

Rnds 14–15: Ch 1, sc in each st around, join. (72 sts)

Checkpoint: the solid band is 0.75 in (1.9 cm) tall.

Wall: Fan Lace

The lace uses an 8-stitch repeat, and 72 ÷ 8 = 9 repeats.

Rnd 16 (V round): Ch 1, sc in first st, ch 3, sk 3 sts, V-st in next st, ch 3, sk 3 sts, sc in next st. Repeat from * around. On the last repeat, leave out the final sc and join to the first sc instead. (9 sc, 9 V-sts)

Rnd 17 (first fan tier): Ch 1, sc in first sc, ch 2, Fan in ch-1 sp of next V-st, ch 2, sc in next sc. Repeat around, leave out the last sc and join to the first sc. Skip the ch-3 spaces from Rnd 16 throughout. (9 fans, 9 sc)

Rnd 18 (offset V round): Ch 4 (counts as dc and ch 1), dc in same st as join. This is the first V-st. Ch 3, sc in center ch-1 sp of next fan, ch 3, V-st in next sc. Repeat around. End with ch 3, sc in center sp of last fan, ch 3, then join to the 3rd ch of the beginning ch-4. (9 V-sts, 9 sc, 18 ch-3 sps)

Rnd 19 (second fan tier): Sl st into first ch-1 sp. Ch 4 (counts as dc and ch 1), (dc, ch 1) 4 times in same sp, dc in same sp. This is the first fan. Ch 2, sc in next sc, ch 2, Fan in ch-1 sp of next V-st. Repeat around. End with ch 2, sc in last sc, ch 2, then join to the 3rd ch of the beginning ch-4. (9 fans, 9 sc)

The second tier of fans sits between the first-tier fans, which gives the layered seashell look.

Checkpoint: the wall is 2.75 in (7.0 cm) tall.

Wall: Solid Rim Round

Rnd 20 (conversion round): Ch 1, sc in each of the 5 ch-1 sps of the first fan. Sc in ch-2 sp, hdc in sc, sc in ch-2 sp, sc in each of the 5 ch-1 sps of next fan. Repeat around. End with sc in ch-2 sp, hdc in sc, sc in last ch-2 sp, then join.

The stitch count is 45 sc in the fan spaces + 18 sc in the ch-2 spaces + 9 hdc in the sc = 72 sts. The dc posts of the fans are skipped.

Checkpoint: the basket is 5.75 in (14.6 cm) across at the rim and 3 in (7.6 cm) tall. Fasten off the teal.

Make All Pieces

  • Baskets: 3, in teal (Rnds 1–20), each with a cream border
  • Straps: 2, in cream
  • Rings: 6 wooden rings, 2 per basket

Strap (make 2):

Row 1: With cream, ch 100. Sc in the 2nd ch from the hook and in each ch across. (99 sc)

Row 2: Ch 1, turn, sl st in each sc across. (99 sl sts) Fasten off and leave a 12 in (30.5 cm) tail.

Each strap measures 24.75 in (62.9 cm) long and about 0.4 in (1.0 cm) wide.

Loop: Fold the top 3 in (7.6 cm) of the strap back onto itself and sew it down flat. This makes a 1.5 in (3.8 cm) hanging loop and leaves an effective strap length of 21.75 in (55.2 cm).

Layout grid:

        [loop][loop]   (one peg)
          /      \
 (ring)-[ Basket 1 ]-(ring)
   |                    |
 (ring)-[ Basket 2 ]-(ring)
   |                    |
 (ring)-[ Basket 3 ]-(ring)
   |                    |
  tack                 tack

Joining

Attaching the rings. With cream yarn, whipstitch each ring over Rnds 20 and 21 of the rim with 6 wraps. Spread the wraps across 3 stitches: center the first ring on st 1 (sts 72, 1 and 2) and the second on st 37 (sts 36, 37 and 38). Half the ring should sit above the scallop edge.

There are 36 stitches between the two ring centers, which is exactly half of 72, so the rings sit directly opposite each other. Both ring stitches also land on the sc between two scallops of the border, so each ring sits neatly in a valley of the scallop edge.

Threading the straps. Lay the three baskets in a column with the rings lined up. Thread each strap down through its 3 rings, from the front to the back of each ring.

  • Top ring: set it 8.25 in (21.0 cm) below the top of the loop.
  • Middle and bottom rings: space them 5 in (12.7 cm) apart, measured center to center. The top and bottom rings end up 10 in (25.4 cm) apart, and each gap between baskets is 1.25 in (3.2 cm).
  • Below the bottom ring: the remaining 3.5 in (8.9 cm) of strap runs down the side of the bottom basket. Tack it to the wall at Rnd 15.

Tacking. At each ring, sew the strap to itself just under the ring with 3 small stitches. Also tack the strap to each basket wall at Rnd 15 so the baskets can’t swing.

Tension. Keep the tacking stitches snug but don’t pull them tight, or the strap will pucker. Hang the holder while you adjust it, so the weight evens out the spacing.

Size checkpoint: the empty holder hangs 22 in (55.9 cm) from the top of the loop to the base of the lowest basket. The two straps should be the same length to within 0.25 in (0.6 cm).

Border

Border gauge: in cream, 16 sc = 4 in (10.2 cm), so 72 sc measure 18 in (45.7 cm) around and match the rim exactly. Work the border on each basket after Rnd 20, before you attach the rings.

Rnd 21: Join cream in any st of Rnd 20. Ch 1, sc in each st around, join. (72 sts)

This round is worked 1 per existing stitch, with 0 stitches added.

Rnd 22 (scallop round): Ch 1, sc in first st, sk 2 sts, Scallop in next st, sk 2 sts, sc in next st. Repeat around. On the last repeat, leave out the final sc and join to the first sc. Fasten off.

This gives 12 scallops: 12 sc + 60 dc = 72 sts. Each scallop uses a 6-stitch repeat (1 sc + 2 skipped + 1 scallop stitch + 2 skipped).

Why the math works. The basket rim holds steady at 72 stitches from Rnd 12 through Rnd 21. Because 72 divides evenly by 8 for the fans and by 6 for the scallops, there are no leftover stitches and no fudged joins. The border adds 0.75 in (1.9 cm) of height, which brings the basket from 3 in (7.6 cm) to 3.75 in (9.5 cm).

Final Blocking

  1. Weave in all ends on the inside of each basket.
  2. Wet each basket in cool water and gently squeeze it out. Don’t wring it.
  3. Slide a 4.5 in (11.4 cm) diameter jar or a wrapped toilet roll inside, padded with a towel to make it fill out to the full 5.75 in (14.6 cm).
  4. Pin the scallops so they stand upright and stay even.
  5. Pat the fans open with your fingers so the chain spaces look even.
  6. Lay the straps flat, pinned straight at 21.75 in (55.2 cm) effective length.
  7. Let everything dry completely before you assemble the holder.

Final Quality-Control Checklist

  • [ ] Each base is flat and 5.75 in (14.6 cm) across.
  • [ ] Each rim has 72 sts and 12 scallops.
  • [ ] Each basket has 9 fans in each tier, offset between tiers.
  • [ ] All three baskets are 3.75 in (9.5 cm) tall.
  • [ ] Each basket’s two rings are directly opposite each other (at st 1 and st 37).
  • [ ] The straps are equal in length and the ring spacing is 5 in (12.7 cm).
  • [ ] The holder hangs level, with a total length of 22 in (55.9 cm).
  • [ ] All ends are woven in on the inside.

Troubleshooting

The base ruffles. Your tension is too loose or you added extra increases. Count Rnd 12 again (it should be 72) and go down a hook size.

The base cups. Your tension is too tight. Go up a hook size or loosen your sc.

The fans lean. You probably missed a stitch in Rnd 16. Each repeat must use exactly 8 sts.

The rim flares. Rnd 20 has more than 72 sts. Make sure you skip the dc posts of the fans.

The scallops don’t close evenly. Count Rnd 21 again. It must be exactly 72.

The holder hangs crooked. Measure both straps from the loop to each ring and re-tack any that don’t match.

A basket sags. Add another tack at Rnd 15 on both sides.

Care

Hand wash in cool water and lay flat to dry, re-shaping each basket over a roll. Don’t hang the holder up wet, because the weight will stretch the straps.

Cream and teal crocheted three-tier hanging organizer with rope handles displaying toilet paper rolls in a bright, minimalist bathroom.

Final Notes

Each measurement in this pattern feeds the next. A 16-stitch gauge gives a 72-stitch base 5.75 in (14.6 cm) across, and those 72 stitches carry through the wall: 9 fans in 8-stitch repeats, a 72-stitch rim round and 12 cream scallops in 6-stitch repeats. The finished basket is 3.75 in (9.5 cm) tall. Opposite rings at st 1 and st 37, spaced 5 in (12.7 cm) apart on two 21.75 in (55.2 cm) straps, give a holder 22 in (55.9 cm) long. Check each step against these numbers and all three tiers will hang level.

Happy crocheting!

Leave a Comment