Seaside Shell Letter C Keychain Crochet Pattern

This little letter C is made of rows of shell stitch fans in turquoise and white, like small waves running along the curve. A thin turquoise outline makes the letter shape stand out, and three cream flowers with green leaves add a soft spring touch. Hang it from a gold split ring on your bag, keys, or pencil case.

The letter itself is bright turquoise and white. The flowers are cream with yellow centers, and the leaves are a soft leaf green. The look is light and lacy, but cotton yarn keeps it sturdy enough to hold its shape as a keychain.

This pattern uses US crochet terms. The finished letter measures 4.5 in (11.4 cm) tall and 3.75 in (9.5 cm) wide, and the band is 1.5 in (3.8 cm) wide.

You work the C in one piece. Four rows run along its length, starting at the inner curve and working outward. Each outer row has extra shells, so the strip curves into a C on its own. Then one round of turquoise sc outlines the letter, you sew on the flowers and leaves, and you add the hardware last.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) tall x 3.75 in (9.5 cm) wide
  • Skill level: Easy+ (basic stitches, careful counting)
  • Terminology: US crochet terms
  • Yarn weight: Sport (#2) cotton
  • Hook: 3.25 mm (US D/3)
  • Number of pieces: 1 crocheted letter, plus 3 flower and 5 leaf appliqués
  • Layout: a single letter C, with rows worked lengthwise along the curve
  • Piece size before border: the band is 1.25 in (3.2 cm) wide; the inner edge is about 3.75 in (9.5 cm) long and the outer edge about 9.5 in (24.1 cm) long
  • Border depth: 0.125 in (0.3 cm) per edge, which brings the band to 1.5 in (3.8 cm)

Materials

Mercerized sport-weight cotton works best here. It shows each fan clearly, keeps its shape, and doesn’t fuzz when it rubs against a bag. Any smooth sport cotton will do. The quantities below assume about 150 m per 50 g.

  • Color A, turquoise: 6 g, about 18 m (Rows 1 and 3, border)
  • Color B, white: 4 g, about 12 m (Rows 2 and 4)
  • Color C, cream: 2 g, about 6 m (flower petals)
  • Color D, yellow: 1 g, about 3 m (flower centers)
  • Color E, leaf green: 1 g, about 3 m (leaves)

All quantities include a margin of about 25 percent for your gauge test and tails. Leftover yarn is plenty for this project.

Tools:

  • 3.25 mm (US D/3) crochet hook
  • Tapestry needle
  • Scissors
  • Rust-proof pins and a blocking mat or folded towel
  • Gold split ring, 1 in (2.5 cm) across
  • Short gold chain, about 0.75 in (1.9 cm) long, with 2 jump rings
  • Flat-nose pliers

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side
  • rep – repeat

Special stitch, Shell: 5 dc in the same stitch. The 3rd dc is the center dc of the shell.

Increase shell (inc-shell): worked over one shell of the row below: sc in its 2nd dc, 5 dc in its center dc, sc in its 4th dc. This adds 1 extra shell and 1 extra sc, and that extra width is what makes the band curve.

Gauge and Checkpoints

Gauge: 1 shell repeat (1 shell + 1 sc, 6 sts) = 0.75 in (1.9 cm) wide. Four shell rows = 1.25 in (3.2 cm) tall.

Make Row 1 first and measure it as your gauge test. Every later measurement depends on it.

  • After Row 1: the strip is about 3.75 in (9.5 cm) long.
  • After Row 2: the band is about 0.6 in (1.5 cm) wide and already curves a little.
  • After Row 4: the band is 1.25 in (3.2 cm) wide, and the outer edge is about 9.5 in (24.1 cm) measured along the curve.
  • After the border and blocking: the letter is 4.5 in (11.4 cm) tall x 3.75 in (9.5 cm) wide.

If Row 1 is longer than 4 in (10.2 cm), go down to a 3.0 mm hook. If it’s shorter than 3.5 in (8.9 cm), go up to a 3.5 mm (US E/4) hook. A small difference only changes the size of the letter. The shape stays the same because the shell counts control the curve.

Crocheted daisy with white petals and yellow center, green leaf, hanging from gold keyring with turquoise and white woven cord.

Letter C

You fasten off at the end of every row and join the next color fresh, so there are no carried strands. Leave 4 in (10.2 cm) tails and crochet over them in the border.

Row 1 (RS, Color A): Ch 32. Sc in 2nd ch from hook, *skip 2 ch, shell in next ch, skip 2 ch, sc in next ch; rep from * 4 more times. Fasten off. (5 shells, 6 sc = 31 sts)

This row is the inner edge of the C. Label the shells S1 to S5 in the order you made them, from right to left with the RS facing.

Row 2 (WS, Color B): Turn. Join B with a sl st in the last sc worked. Ch 3 (counts as the first dc), then 4 dc in the same sc to make the first shell. Continue across:

  • sc in center dc of S5, shell in next sc;
  • inc-shell over S4, shell in next sc;
  • inc-shell over S3, shell in next sc;
  • inc-shell over S2, shell in next sc;
  • sc in center dc of S1, shell in last sc.

Fasten off. (9 shells, 8 sc = 53 sts)

Check: 6 shells sit in the 6 sc of Row 1, and the inc-shells add 3 more. Of the 8 sc, 1 each sits over S1 and S5, and 2 each sit over S2, S3, and S4. The row starts and ends with a shell. Because these shells are offset from Row 1, the white fans nest between the turquoise ones.

Row 3 (RS, Color A): Turn. Join A with a standing sc in the center dc of the first shell. *Shell in next sc, sc in center dc of next shell; rep from * 7 more times. Fasten off. (8 shells, 9 sc = 49 sts)

The outer 2 dc of the first and last shells of Row 2 stay unworked and form the sloped ends of the arms. Label the new shells T1 to T8 in the order you made them, from right to left with the RS facing.

Row 4 (WS, Color B): Turn. Join B with a sl st in the last sc worked. Ch 3, then 4 dc in the same sc. Continue across:

  • sc in center dc of T8, shell in next sc;
  • sc in center dc of T7, shell in next sc;
  • [inc-shell over next shell, shell in next sc] 4 times (over T6, T5, T4, T3);
  • sc in center dc of T2, shell in next sc;
  • sc in center dc of T1, shell in last sc.

Fasten off. (13 shells, 12 sc = 77 sts)

Check: 9 shells sit in the 9 sc of Row 3, and the 4 inc-shells add 4 more, for 13 shells. Of the 12 sc, T1, T2, T7, and T8 each get 1, and T3 to T6 each get 2. 13 shells x 5 dc + 12 sc = 77 sts.

Shape check: Lay the piece flat. The 3 inc-shells in Row 2 and the 4 in Row 4 add width to the outer edge, so the strip curls into a horseshoe on its own. Gently ease it into a C with an opening about 1.5 in (3.8 cm) across.

Flowers (make 3)

Center (Color D): Magic ring, ch 1, 5 sc in ring. Pull the ring closed and sl st to the first sc. Fasten off. (5 sc)

Petals (Color C): Join C in any sc. *(Ch 2, 2 dc, ch 2, sl st) in the same sc, sl st in next sc; rep from * 4 more times, working the last sl st into the joining st. Fasten off, leaving a 6 in (15.2 cm) tail for sewing. (5 petals)

Each flower should measure about 0.9 in (2.3 cm) across.

Leaves (make 5)

Color E: Ch 6. Sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch. In the last ch, work (hdc, ch 2, sl st in 2nd ch from hook, hdc) to make the pointed tip. Rotate and work along the other side of the foundation ch: dc in next 2 ch, hdc in next ch, sc in last ch, sl st to the first sc. Fasten off, leaving a 6 in (15.2 cm) tail. (10 sts plus tip picot)

Each leaf is about 0.6 in (1.5 cm) long.

Border

Border gauge: 1 sc per existing stitch and 2 sc per row end. A border sc is the same width as the stitch beneath it, and 2 sc fill the 0.3 in (0.8 cm) height of one shell row.

Border Round (RS, Color A): Turn so the RS faces you. Join A with a standing sc in the first dc of Row 4, at the outer corner of one arm. Work around the whole letter:

  • Outer edge: 2 more sc in the same st (3-sc corner), sc in next 75 sts, 3 sc in last st. (81 sc: 77 sts worked 1 per stitch + 4 extra corner sc)
  • First arm end: 8 sc spaced evenly along the row ends, 2 per row. (8 sc)
  • Inner edge: working in the free loops of the foundation ch, 3 sc in the first ch, sc in next 29 ch, 3 sc in last ch. (35 sc: 31 sts worked 1 per stitch + 4 extra corner sc)
  • Second arm end: 8 sc spaced evenly, 2 per row. (8 sc)

Sl st to the first sc. Fasten off. (132 sc in total)

Why the math works: The outer edge has 77 sts and the inner edge has 31, so 108 sts are worked 1 per stitch. The 4 corners add 2 extra sc each (8 sc), and the two arm ends add 16 row-end sc, for 132 in total. Each corner’s 3 sc are counted once, inside the edge it belongs to, so nothing is counted twice. The inner edge only gets 1 sc per chain, which keeps it short and holds the curve. The outer edge also gets exactly 1 sc per stitch, so it lies flat over the extra shells without ruffling.

Final Blocking

  1. Weave in all remaining tails, keeping each one inside stitches of the same color.
  2. Soak the letter in cool water, then press out the extra water in a towel. Don’t wring it.
  3. Lay it RS up on the blocking mat.
  4. Pin it to 4.5 in (11.4 cm) tall and 3.75 in (9.5 cm) wide, with the opening about 1.5 in (3.8 cm) across.
  5. Pin the band to an even 1.5 in (3.8 cm) wide all the way around. Put a pin in the tip of each outer fan so the shells open evenly.
  6. Pin the flowers and leaves out flat separately, opening each petal.
  7. Let everything dry completely, for at least 6 hours.
  8. Sew on the appliqués:
  9. One flower on the top curve, with 2 leaves tucked under its left side.
  10. One on the outer back of the spine, with 1 leaf above it and 1 below.
  11. One at the tip of the lower arm, with 1 leaf showing under its lower edge.

Sew through the back loops so the stitches don’t show on the front.
9. Open a jump ring with pliers. Pass it through 2 border sc at the top of the curve, just to the right of the top flower, and close it around one end of the chain. Join the other end of the chain to the split ring with the second jump ring.

Final Quality-Control Checklist

  • The row stitch counts are 31, 53, 49, and 77.
  • The border has 132 sc: 81 on the outer edge, 35 on the inner edge, and 8 at each end.
  • The turquoise and white fans are offset, with each fan nested between two fans of the row below.
  • The letter measures 4.5 in (11.4 cm) x 3.75 in (9.5 cm), and the band is 1.5 in (3.8 cm) wide.
  • The letter lies flat without cupping or ruffling.
  • All 3 flowers are sewn on firmly, and no sewing shows from the front.
  • Both jump rings are fully closed, with no gap the yarn could slip through.

Troubleshooting

The C stays too straight. Check that you made 3 inc-shells in Row 2 and 4 in Row 4. If those counts are right, make the foundation chain tighter or use a hook one size smaller for Row 1 only.

The outer edge ruffles. Your Row 4 shells are loose. Redo the border with a hook one size smaller, still working 1 sc per stitch.

The inner edge puckers. Your foundation chain is too tight. Make the chain with a hook one size larger, then switch back for the stitches.

The arm ends look ragged. Work the 8 row-end sc into the sides of the dc posts, not into the gaps between rows.

The flowers curl. Block them flat before sewing and pin each petal open.

The keychain twists on the ring. Move the jump ring so it sits at the center of the top curve, above the spine.

Care

Hand wash in cool water with mild soap, press dry in a towel, and lay flat to dry. Don’t machine wash it, because the metal hardware can snag and the fans can stretch out of shape.

Crocheted letter E keychain charm with white daisies, yellow centers, and turquoise sections hanging from a tan leather bag.

Final Notes

Everything in this pattern depends on Row 1. If it measures 3.75 in (9.5 cm), four rows give you a 1.25 in (3.2 cm) band with an outer edge of about 9.5 in (24.1 cm). The 132-stitch border then brings the band to 1.5 in (3.8 cm) and the letter to 4.5 in (11.4 cm) x 3.75 in (9.5 cm). Check each of those numbers as you go, and you’ll end up with a crisp, lacy C to clip onto your favorite bag.

Happy crocheting!

Leave a Comment