Starfall Valance Curtain Crochet Pattern

The Starfall Valance Curtain is a light, airy window hanging. It has a scalloped lace valance and ten long chain strands threaded with five-point stars. Cream and mustard stars alternate down every strand, and neighboring strands are staggered so the colors form a soft checkerboard against the glass.

Each star has a lacy, flower-like center with five small openings, solid pointed arms, and a crisp single crochet outline with a chain tip at every point. The valance has a solid band, lacy fan scallops with picot edges, and ten narrow tabs that loop over a curtain rod.

This pattern uses US crochet terms. The finished curtain is 36.2 in (91.9 cm) wide. It hangs about 68 in (172.7 cm) from the rod to the lowest star.

The construction is modular. Make 90 stars, then crochet the valance band and tabs and add the scalloped edge. Finally, chain each strand straight down from the valance, joining stars as you go.

Finished Size and Construction

  • Finished size: 36.2 in (91.9 cm) wide x about 68 in (172.7 cm) long
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK / light worsted (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 90 stars, 1 valance, 10 chain strands
  • Layout: 10 strands x 9 stars, colors alternating and staggered
  • Piece size: each star 3.5 in (8.9 cm) tip to tip
  • Size before border: valance band 36.2 in x 1.25 in (91.9 cm x 3.2 cm)
  • Border depth: the scallop edge adds 1.75 in (4.4 cm), so the valance is 3 in (7.6 cm) deep at the scallop centers

Materials

Choose a smooth mercerized or combed cotton in DK weight. Cotton keeps the star points crisp, resists sagging, and holds up in sunlight better than most acrylics.

  • Color A, cream: 250 g / about 600 m (stars, valance, tabs, strands)
  • Color B, mustard: 150 g / about 360 m (stars)

These quantities include a margin of roughly 10–15 percent for gauge swatches and tension differences.

Tools:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers
  • Rust-proof pins and a blocking mat
  • Spray bottle
  • Measuring tape
  • Curtain rod up to 1 in (2.5 cm) in diameter

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • sp(s) – space(s)
  • MR – magic ring
  • RS – right side
  • st(s) – stitch(es)

Special stitch – picot: (sc, ch 3, sc) worked in the same space.

Gauge and Checkpoints

Fabric gauge: 20 sts x 11 rows of dc = 4 in (10.2 cm). 20 sc x 22 rows = 4 in (10.2 cm).

Chain gauge: 6 ch = 1 in (2.5 cm), worked at relaxed tension.

Make one star first and check it at each stage:

  • After Rnd 1: 1.25 in (3.2 cm) across
  • After Rnd 2: 1.75 in (4.4 cm) across
  • After Rnd 3: 3.25 in (8.3 cm) tip to tip
  • After Rnd 4: 3.5 in (8.9 cm) tip to tip

If your star is larger than 3.75 in (9.5 cm), switch to a 3.25 mm hook. If it is smaller than 3.25 in (8.3 cm), switch to a 3.75 mm hook. The valance width depends on accurate stitch gauge, so make a dc swatch before you start it.

Golden crocheted star appliqué with openwork stitching on rustic wooden background.

Star Motif

Make 45 stars in Color A and 45 in Color B. All stars are identical.

Rnd 1: MR, ch 3 (counts as dc), 14 dc in ring, sl st to top of ch-3 to join. Pull the ring tight. (15 dc)

Rnd 2: Ch 1, sc in same st, ch 4, sk 2 dc, sc in next dc; rep from * 3 more times, ch 4, sk 2 dc, sl st to first sc. (5 sc, 5 ch-4 loops)*

The skipped dc pairs create the five small openings that give the center its flower look.

Rnd 3 (points): Sl st into next ch-4 loop. In the ch-4 loop work (hdc, 2 dc, tr, ch 2, tr, 2 dc, hdc), sl st in next sc; rep from * 4 more times. The last sl st goes in the sl st at the base of the round. (40 sts, 5 ch-2 tips, 5 sl sts)*

Each point has 8 sts plus a ch-2 tip. Push the stitches together inside the loop so each arm stands firm.

Rnd 4 (outline): Ch 1. Sc in hdc, sc in next 2 dc, 2 sc in tr, (sc, ch 2, sc) in ch-2 tip, 2 sc in tr, sc in next 2 dc, sc in hdc, sk the sl st; rep from * 4 more times, sl st to first sc. Fasten off and weave in ends. (60 sc, 5 ch-2 tips)*

Each point now has 12 sc: 1 + 2 + 2 + 2 + 2 + 2 + 1 = 12. The skipped sl st forms the inner valley between points.

Valance Band

Work in Color A.

Row 1: Ch 182, sc in 2nd ch from hook and in each ch across, turn. (181 sc)

Row 2: Ch 3 (counts as dc), dc in each st across, turn. (181 dc)

Row 3: Ch 1, sc in each st across, turn. (181 sc)

Row 4: Ch 3 (counts as dc), dc in each st across. Fasten off. (181 dc)

Checkpoint: the band measures 36.2 in (91.9 cm) wide and 1.25 in (3.2 cm) deep. The 181 sts are 10 repeats of 18 sts plus 1 final stitch.

Tabs

The top edge of the valance is the free loops of the foundation chain, on the side opposite Row 1. Place markers in those loops at sts 8, 26, 44, 62, 80, 98, 116, 134, 152, and 170. Each marker is the first of 5 tab stitches, centered within its 18-st repeat.

Row 1: Join Color A at a marked st, ch 1, sc in same st and in next 4 sts, turn. (5 sc)

Rows 2–20: Ch 1, sc in each st, turn. (5 sc)

Fasten off, leaving a 10 in (25.4 cm) tail. Each tab is 1 in (2.5 cm) wide and 3.5 in (8.9 cm) long. Make 10 tabs.

Fold each tab to the back and whipstitch its last row to the back of Row 2, directly behind the tab’s base. Check that the loop slides easily over your rod.

Make All Pieces

  • Color A stars: 45
  • Color B stars: 45
  • Valance: 1, with 10 tabs
  • Strands: 10, chained directly from the valance during joining

Odd strands start with Color A. Even strands start with Color B and hang lower to create the stagger.

Strand:  1  2  3  4  5  6  7  8  9  10
Row 1:   A  .  A  .  A  .  A  .  A  .
         .  B  .  B  .  B  .  B  .  B
Row 2:   B  .  B  .  B  .  B  .  B  .
         .  A  .  A  .  A  .  A  .  A
Row 3:   A  .  A  .  A  .  A  .  A  .
         .  B  .  B  .  B  .  B  .  B
...continue alternating to 9 stars per strand
  • Odd strands: A, B, A, B, A, B, A, B, A (5 A, 4 B)
  • Even strands: B, A, B, A, B, A, B, A, B (5 B, 4 A)
  • Totals: 25 + 20 = 45 stars of each color

Joining

Do the joining after you finish the scallop edge in the Border section. It is placed here so you can see the full layout before you start.

Each strand starts at the free top of the center dc of a fan, which is the 5th of the 9 dc in Border Row 7. These 10 points are 3.6 in (9.1 cm) apart, directly below the 10 tabs.

Odd strands:

  1. Join Color A with a sl st in the center dc of the fan.
  2. Ch 18 (3 in / 7.6 cm).
  3. Hold a star with one point up. Sl st into its top ch-2 tip.
  4. Ch 15 (2.5 in / 6.4 cm) and lay this chain flat across the back of the star. Sl st into the valley between the two lower points, inserting the hook under both sc beside the skipped sl st.
  5. Ch 27 (4.5 in / 11.4 cm).
  6. Repeat steps 3–5 until 9 stars are attached, leaving out the final ch 27. Fasten off and weave the tail up into the chain.

Even strands: work the same way, but ch 39 (6.5 in / 16.5 cm) in step 2.

The distance from one star to the next (the pitch) is 2.5 in + 4.5 in = 7 in (17.8 cm). The even strands start with 21 extra chains, or 3.5 in (8.9 cm), which is exactly half the pitch. That creates an even stagger.

Tension: keep the same relaxed chain tension throughout. The ch 15 behind each star must lie flat. If the star cups, add 1–2 ch; if the chain sags, remove 1–2 ch.

Size checkpoint: odd strands measure 61.5 in (156.2 cm) below the valance, and even strands measure 65 in (165.1 cm). The longest strands plus the 3 in (7.6 cm) valance give the 68 in (172.7 cm) total.

Border

The border is the scalloped lace edge, worked along the bottom of the valance band (the dc of Row 4). The gauge is the same: 20 sts = 4 in (10.2 cm). Each 18-st repeat makes one scallop 3.6 in (9.1 cm) wide.

Row 5: With RS facing, join Color A in the first dc of Row 4. Ch 1, sc in same st, ch 5, sk 5 sts, sc in next st; rep from * across, turn. (31 sc, 30 ch-5 loops)*

Each ch-5 loop plus its sc covers 6 sts: 30 x 6 = 180, plus the first sc = 181. Three loops make one scallop repeat (3 x 6 = 18 sts). Call the three loops in each repeat A, B, and C.

Row 6: Ch 1, sc in first sc, ch 2, sc in loop A, 9 dc in loop B, sc in loop C, ch 2, sc in next sc between repeats; rep from * across, turn. (10 fans of 9 dc, 20 loop sc, 11 boundary sc)*

Row 7: Ch 1, sc in first sc, ch 3, (dc in next dc, ch 2) 8 times, dc in next dc, ch 3, sc in next boundary sc; rep from * across, turn. (10 fans of 9 dc and 8 ch-2 sps, 11 sc)*

The ch-3 chains skip over the loop sc and the ch-2 spaces of Row 6, which opens each fan into a lacy half circle.

Row 8: Ch 1, sc in first sc, 2 sc in ch-3 sp, picot in each of next 8 ch-2 sps, 2 sc in next ch-3 sp, sc in boundary sc; rep from * across. Fasten off. (211 sc, 80 picots)*

Each repeat has 2 + 16 + 2 + 1 = 21 sc. The total is 1 + (10 x 21) = 211 sc.

Why the math works: the band’s 181 sts divide into exactly 10 repeats of 18, plus 1 anchor stitch. Every row returns to the same 11 boundary stitches, so each scallop stays 3.6 in (9.1 cm) wide and the valance stays 36.2 in (91.9 cm) wide. Loop B sits directly under the tab stitches, so each fan is centered below its tab. Row 8 skips the Row 7 dc tops, which leaves each center dc free for its strand.

Checkpoint: the valance is 3 in (7.6 cm) deep at each scallop center.

Final Blocking

  1. Weave in all remaining ends before blocking.
  2. Pin each star flat with one point up. Pin every tip at its ch-2 space so the star measures 3.5 in (8.9 cm).
  3. Pin the valance flat to 36.2 in (91.9 cm) wide, opening each picot with a pin.
  4. Mist everything until damp but not dripping.
  5. Let everything dry completely, about 12–24 hours.
  6. Hang the curtain for a day so gravity straightens the strands.

Final Quality-Control Checklist

  • 90 stars, each 3.5 in (8.9 cm) tip to tip, with 5 sharp points
  • 5 even openings in every star center
  • Valance 36.2 in (91.9 cm) wide, with 10 scallops and 10 tabs
  • Each strand hanging from a scallop center, directly below a tab
  • Colors alternating down every strand and across every row
  • Even strands sitting 3.5 in (8.9 cm) lower than odd strands
  • All tails woven in securely

Troubleshooting

Star points curl forward: Rnd 3 is too tight. Go up half a hook size for that round only.

Star center ruffles: Rnd 1 has too many stitches. Recount to 15 dc.

Valance wider than 36.2 in (91.9 cm): your dc is loose. Rework the band with a smaller hook rather than skipping stitches.

Fans flare or pucker: check that each repeat has 9 dc in loop B and that each ch-5 loop skips exactly 5 sts.

Stars twist on the strand: join at the top tip and the opposite bottom valley, not at a side point.

Strands are uneven: count chains in groups of 10 and mark each star join.

Care

Hand wash in cool water with mild soap, roll in a towel, and dry flat before rehanging. Don’t tumble dry, because the strands will tangle.

Crocheted cream and gold window curtain with scalloped valance and hanging star decorations, displayed with potted plant and garden view.

Final Notes

Here is the full measurement chain:

  • Each star is 3.5 in (8.9 cm).
  • The valance band is 181 sts: 36.2 in (91.9 cm) wide and 1.25 in (3.2 cm) deep.
  • The scallop edge adds 1.75 in (4.4 cm) and makes 10 scallops of 3.6 in (9.1 cm) each.
  • The stars hang at a 7 in (17.8 cm) pitch, and the even strands are shifted down 3.5 in (8.9 cm).

Check each stage and the curtain will hang straight and balanced.

Happy crocheting!

Leave a Comment