Sugared Lattice Ornament Crochet Pattern

The Sugared Lattice Ornament is a soft, round Christmas ornament wrapped in an open honeycomb net. Rows of chain arches meet at small single crochet knots, and the cream fabric ball shows through every diamond-shaped opening. A cream cord hanging loop and a small cream bow finish the top.

The sample uses a pale blush pink cotton over a cream fabric ball, with cream trims. The same design works just as well in sage green, cream or lavender, so you can make a matching set from one set of instructions. The look is quiet, vintage and a little lacy.

This pattern uses US crochet terms. The finished ornament is 3 in (7.6 cm) in diameter, or about 6.5 in (16.5 cm) tall with the hanging loop.

Construction is simple. You crochet one flat rectangular mesh panel and seam its short ends into a tube. Then you close the bottom with a short edging, slip in a stuffed fabric ball and close the top the same way. Two slip-stitch cords become the hanging loop and the bow.

Finished Size and Construction

  • Finished size: 3 in (7.6 cm) diameter ball; about 6.5 in (16.5 cm) tall with the loop
  • Skill level: Easy
  • Terminology: US crochet terms
  • Yarn weight: DK (#3), cotton or cotton blend
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 crocheted mesh cover, plus 2 cords and 1 fabric inner ball
  • Layout: a single panel, seamed into a tube and gathered at both ends
  • Panel size (flat, before seaming): 8.5 in (21.6 cm) wide x 4 in (10.2 cm) tall
  • Size before border: 8.5 in (21.6 cm) around the tube, open at both ends
  • Border depth: 2 rounds at each opening, about 0.4 in (1.0 cm) before cinching

Materials

Choose a smooth DK cotton, either mercerized or matte. Cotton keeps the chain arches crisp and open, and that is what gives the lattice its clean look. Avoid fuzzy or very stretchy yarns because they blur the knots.

  • Main color (MC), blush pink: 12 g, about 29 m
  • Contrast color (CC), cream: 5 g, about 12 m (hanging loop and bow)

Quantities include a margin for checking gauge and for long tails.

For a set, make extra ornaments with sage green, cream or lavender as MC. Each one needs the same 12 g (about 29 m). Keep the cream trims and the cream ball the same on every ornament so the set looks unified.

Tools and supplies:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • Scissors
  • Cream cotton fabric, one 9 in (22.9 cm) circle
  • Sewing needle and cream sewing thread
  • Polyester fiberfill, about 15 g
  • Optional: a 3 in (7.6 cm) foam ball instead of the fiberfill
  • Stitch marker

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • sp – space
  • rnd – round
  • MC / CC – main color / contrast color

Special stitch – slip-stitch cord: Chain the stated number. Starting in the 2nd ch from the hook, sl st into the back bump of each ch across. This makes a firm, rounded cord that will not curl.

Mesh knot: Each knot in the lattice is 1 sc worked into a ch-5 sp of the row below. Three chain strands meet at that sc, which makes the small joined point in the net.

Gauge and Checkpoints

Mesh gauge: Measured flat and unstretched:
– 4 arch repeats (ch 5 + sc) = 3.75 in (9.5 cm) wide
– 7 mesh rows = 4 in (10.2 cm) tall

Single crochet gauge (for the border): 5 sc = 1 in (2.5 cm).

Mesh gauge is easiest to check on the real panel. Treat your first panel as the test piece. Work Row 1 and measure it before going further.

Checkpoints:

  • After Row 1: 8.5 in (21.6 cm) wide, laid flat without stretching
  • After Row 3: about 1.75 in (4.4 cm) tall
  • After Row 5: about 2.75 in (7.0 cm) tall
  • After Row 7: 4 in (10.2 cm) tall and 8.5 in (21.6 cm) wide

The ball measures about 9.4 in (23.9 cm) around. The panel is meant to be a little narrower than that, so the net stretches snugly over the ball instead of sagging.

If your panel is too big: go down to a 3.25 mm (D-3) hook, or work ch-4 arches instead of ch-5 arches with the same number of repeats.

If your panel is too small: go up to a 3.75 mm (F-5) hook. A panel narrower than 8 in (20.3 cm) will be hard to stretch over the ball.

Pink crocheted bell ornament with cream rope bow on beige fabric against warm orange background.

Mesh Panel

With MC, ch 38.

Row 1: Sc in 2nd ch from hook, *ch 5, skip 3 ch, sc in next ch; repeat from * 8 more times, turn. (10 sc, 9 ch-5 sps)

To check the chain math: 1 skipped ch + 1 ch for the first sc + 9 repeats of 4 ch = 38 ch.

Row 2: Ch 5 (counts as dc + ch 2), sc in first ch-5 sp, *ch 5, sc in next ch-5 sp; repeat from * 7 more times, ch 2, dc in last sc, turn. (9 sc, 8 ch-5 sps, 2 half spaces at the edges)

The half spaces keep the side edges straight. Each sc sits in the center of an arch below, so the knots in this row fall between the knots of Row 1. That offset creates the diamond lattice.

Row 3: Ch 1, sc in first dc, *ch 5, sc in next ch-5 sp; repeat from * 7 more times, ch 5, sc in 3rd ch of beginning ch-5, turn. (10 sc, 9 ch-5 sps)

Rows 4 and 6: Repeat Row 2. (9 sc, 8 ch-5 sps, 2 half spaces in each row)

Rows 5 and 7: Repeat Row 3. (10 sc, 9 ch-5 sps in each row)

At the end of Row 7, do not fasten off. Ch 1 and hold the loop with a stitch marker; you will use this yarn for the seam. Check the panel against the Row 7 checkpoint: 8.5 in (21.6 cm) by 4 in (10.2 cm).

The top edge of Row 7 now shows 9 rounded arches. The bottom edge is the foundation chain, with 9 ch-3 gaps under the Row 1 arches.

Seaming the Tube

Fold the panel right side out so the two short side edges meet. The row ends match one to one: sc meets sc on odd rows, and dc meets dc on even rows.

  1. Pick up the held loop. Sl st into the matching end stitch of Row 7 on the opposite edge.
  2. Working down the edge, sl st through the row-end stitches of each row on both edges together, 1 sl st per row. (7 joining sl sts)
  3. At the bottom, sl st through both foundation ends. Fasten off, leaving a 6 in (15.2 cm) tail to weave in.

Keep these slip stitches loose. The seam should lie flat and look like one more column of knots in the net. A tight seam pulls the lattice into a pucker.

Size checkpoint: The tube measures about 8.5 in (21.6 cm) around and still lies loose.

Inner Ball

  1. Hand-sew a running stitch about 0.5 in (1.3 cm) in from the edge of the 9 in (22.9 cm) fabric circle. Leave long thread ends.
  2. Pull the thread gently to form a cup. Stuff it firmly with fiberfill until the ball is 3 in (7.6 cm) across.
  3. Pull the gathers tight, tuck the raw edge inside and stitch across the opening several times. Knot securely.

Roll the ball between your palms to even out the shape. If you use a foam ball, cover it with the same fabric circle in the same way, without fiberfill.

Border: Bottom and Top Edging

Each opening is worked in the round, so there are no corners. The whole round counts as one side, and its count comes straight from the edge of the panel.

Border gauge: 5 sc = 1 in (2.5 cm).

Bottom Edging

With the right side facing, join MC in any foundation ch-3 gap next to the seam.

Rnd 1: Ch 1, work 2 sc in each of the 9 ch-3 gaps around, sl st to first sc. (9 gaps x 2 sc = 18 sc)

Rnd 2: Ch 1, sc2tog 9 times around, sl st to first sc. (18 sc worked in pairs = 9 sts)

Fasten off, leaving a 12 in (30.5 cm) tail. Thread the tail on a tapestry needle and weave it through the front loop of each of the 9 sts. Pull to close the hole and knot on the inside, but do not trim yet.

Insert the Ball

Push the fabric ball into the tube from the top, gathered side up. Ease the mesh around it so the knots line up in even diagonal rows and the seam runs straight from bottom to top.

Top Edging

Join MC in any Row 7 ch-5 arch next to the seam.

Rnd 1: Ch 1, work 2 sc in each of the 9 ch-5 arches around, sl st to first sc. (9 arches x 2 sc = 18 sc)

Rnd 2: Ch 1, sc2tog 9 times around, sl st to first sc. (9 sts)

Close the opening with the tail, the same way as the bottom.

Why the math works: Both openings have exactly 9 repeats, so both start with 18 sc. At 5 sc per inch, 18 sc measure about 3.6 in (9.1 cm). That is much smaller than the 8.5 in (21.6 cm) tube, so it pulls the mesh in toward the top and bottom. Rnd 2 halves the count to 9 sts, about 1.8 in (4.6 cm), and cinching closes the last gap. Because the top and bottom use the same counts, the ball sits centered with matching gathers at each end.

Hanging Loop and Bow

Hanging loop: With CC, ch 36. Work a slip-stitch cord across. (35 sl sts) The cord measures about 7 in (17.8 cm). Fold it in half to make a 3.5 in (8.9 cm) loop. Sew both ends firmly to the top center of the ornament, right over the closed opening.

Bow: With CC, ch 51. Work a slip-stitch cord across. (50 sl sts) The cord measures about 10 in (25.4 cm). Wrap it once around the base of the hanging loop. Tie a bow with two loops about 1.25 in (3.2 cm) long and let the tails hang down onto the mesh.

Add a few hidden stitches through the bow knot with CC or sewing thread so it cannot come untied.

Final Blocking

  1. Lightly mist the mesh with water. Do not soak the fabric ball.
  2. Use your fingers to nudge each knot until the diamonds are the same size all around the ball.
  3. Straighten the arches nearest the top and bottom so they fan out evenly from the gathered center.
  4. Shape the bow loops and tails so they lie flat and match each other.
  5. Let the ornament dry fully on a small cup so the bow stays upright.

Do not steam the bow directly, because the cotton cord can flatten and lose its round look.

Final Quality-Control Checklist

  • The ball measures 3 in (7.6 cm) across in every direction.
  • Rows 1, 3, 5 and 7 each have 9 full arches.
  • Rows 2, 4 and 6 each have 8 full arches plus 2 half spaces.
  • The seam is loose and looks like a column of knots.
  • Both edgings have 18 sc in Rnd 1 and 9 sts in Rnd 2.
  • The top and bottom openings are fully closed, with no fabric showing at the center.
  • The hanging loop is about 3.5 in (8.9 cm) and firmly sewn.
  • The bow is tied, tacked down and centered.
  • All tails are woven in and trimmed.

Troubleshooting

The lattice looks like squares, not diamonds. You are probably working the sc into the sc below instead of into the ch-5 sp. Every knot must land in the center of an arch.

The side edges slant. Check that every even row starts with ch 5 and ends with ch 2 and a dc. A missing half space shifts the edge.

The panel won’t stretch over the ball. The panel is too narrow. Make it again with a larger hook, or use a slightly smaller ball, such as 2.75 in (7.0 cm).

The mesh sags or wrinkles. The panel is too wide. Go down a hook size, or stuff the ball more firmly.

A hole shows at the top or bottom. Pull the closing tail tighter and take one more pass through the 9 stitches before knotting.

The cord curls. Make sure you work into the back bumps of the chain, not the top loops.

Care

Spot clean only, using a damp cloth and mild soap, then reshape and air dry. Store the ornament flat in tissue paper so the bow and loop keep their shape.

Pastel crocheted ball ornaments in pink, cream, sage, and purple with quilted texture hang from a decorated Christmas tree.

Final Notes

The whole design follows one measurement chain:
– A 38-chain foundation gives 9 arches and a panel 8.5 in (21.6 cm) wide.
– Seven rows bring the panel to 4 in (10.2 cm) tall.
– The seam turns it into a tube that stretches snugly over a 3 in (7.6 cm) ball, about 9.4 in (23.9 cm) around.
– Each opening goes from 9 arches to 18 sc to 9 sts and closes cleanly.

The cream cord loop and bow finish the top.

Once you have made one, try the same pattern in sage, cream or lavender for a full set on the tree.

Happy crocheting!

Leave a Comment