Sunny Shell Letter S Keychain Crochet Pattern

This little letter S is a cheerful, flat keychain made from stripes of shell stitches in sunny yellow and sky blue. A neat yellow edging frames the letter, and three tiny cream daisies with green leaves sit on the front. It’s a quick project with a lot of charm, and it works well as a bag tag, a gift topper or a personalized key fob.

The pattern uses US crochet terms throughout. The finished letter measures 2.5 in wide × 3.75 in tall (6.4 × 9.5 cm) before you add the hardware.

The letter is worked flat in 11 rows, from the bottom up. Every row is worked with the right side facing, and you change color on every row. Two of the rows end in a short chain “bridge” that spans a gap, which forms the two open curves of the S. One round of single crochet finishes the outline. Then you make three daisies and six leaves, sew them on and attach a key ring.

This is a single-piece design, so there’s no joining. All the shaping comes from partial rows and chain bridges.

Finished Size and Construction

  • Finished size: 2.5 in wide × 3.75 in tall (6.4 × 9.5 cm)
  • Skill level: Easy+ (shells, partial rows, working into chain loops)
  • Terminology: US crochet terms
  • Yarn weight: Sport / light (#2) cotton or cotton blend
  • Hook: 2.75 mm (C-2)
  • Number of pieces: 1 letter body, plus 3 daisies and 6 leaves as appliqués
  • Layout: Single letter, no joining
  • Letter size before border: 2.25 in × 3.5 in (5.7 × 8.9 cm)
  • Border depth: 0.125 in (0.3 cm) per side, one round of sc
  • Daisy size: 0.75 in (1.9 cm) across
  • Leaf size: 0.5 in (1.3 cm) long

Materials

Cotton gives crisp shells, holds its shape on a keychain and can be washed. A sport-weight mercerized cotton with about 150 m per 50 g works well. If your yarn is slightly thinner, use the gauge section to adjust your hook before you start.

  • Color A – Yellow: 5 g (about 15 m) for the body stripes, border and daisy centers
  • Color B – Light Blue: 3 g (about 9 m)
  • Color C – Cream White: 1 g (about 3 m) for the petals
  • Color D – Leaf Green: 1 g (about 3 m)

These quantities include a margin for tails and swatching.

Tools

  • 2.75 mm (C-2) crochet hook
  • Tapestry needle
  • Scissors
  • Rustproof pins and a small blocking surface
  • 1 in (2.5 cm) gold split key ring with about 1.5 in (3.8 cm) of chain
  • 2 jump rings, 6 mm
  • 2 pairs of flat-nose pliers (or 1 pair of pliers and your fingers)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • st(s) – stitch(es)
  • sk – skip
  • RS / WS – right side / wrong side

Special stitches

  • Shell: 5 dc in the same st.
  • Half shell: 3 dc in the same st. When a half shell starts a row, work ch 3 (counts as 1 dc) and then 2 dc in the same st.
  • Stitch positions: All rows are worked right to left with the RS facing. Position 1 is always the rightmost stitch of the full 13-stitch width, and position 13 is the leftmost. Partial rows are described by these positions so you always know where you are.

Gauge and Checkpoints

The first 3 rows of the letter form a full-width bar, so they also serve as your gauge test. Work them, then lay the piece flat and measure before you continue.

  • Width: 13 sts in shell pattern = 2.25 in (5.7 cm)
  • Row height: sc row = 0.25 in (0.6 cm); each shell row = 0.325 in (0.8 cm)

Checkpoints

  • After Row 3: 2.25 in wide × 0.9 in tall (5.7 × 2.3 cm)
  • After Row 7: 2.25 in wide × 2.2 in tall (5.7 × 5.6 cm)
  • After Row 11: 2.25 in wide × 3.5 in tall (5.7 × 8.9 cm)
  • After the border: 2.5 in wide × 3.75 in tall (6.4 × 9.5 cm)

If your test bar is wider than 2.25 in (5.7 cm), pull it out and go down 0.25 mm in hook size. If it’s narrower, go up 0.25 mm. Small differences are fine for a keychain, but the border counts assume this gauge, so a close match keeps the edging flat.

Crocheted white daisy with yellow center rests on wooden surface beside green yarn leaves.

Letter Body

Fasten off at the end of every row. Leave tails of about 4 in (10.2 cm) and weave them in later, or crochet over them as you work the next row and the border.

Row 1 (A): Ch 14, sc in 2nd ch from hook and in each ch across. Fasten off. (13 sc)

Row 2 (B): With RS facing, join B with a sl st in position 1. Ch 1, sc in same st, *sk 2, shell in next st, sk 2, sc in next st; repeat from * once more. Fasten off. (13 sts: 2 shells + 3 sc)

Row 3 (A): Join A in position 1 (first sc). Ch 3, 2 dc in same st (half shell), sk 2, sc in center dc of shell, sk 2, shell in next sc, sk 2, sc in center dc of next shell, sk 2, half shell in last sc. Fasten off. (13 sts: 2 half shells + 1 shell + 2 sc)

This completes the bottom bar. Check your gauge now.

Row 4 (B), right half only: Join B in position 1. Ch 1, sc in same st, sk 2, shell in next sc (position 4), sk 2, sc in center dc of shell (position 7). Fasten off. (7 sts: 1 shell + 2 sc) Positions 8–13 stay unworked and become the floor of the lower opening.

Row 5 (A), right half plus bridge: Join A in position 1. Ch 3, 2 dc in same st, sk 2, sc in center dc of shell (position 4), sk 2, half shell in last sc (position 7), ch 6. Fasten off and pull the tail snug through the last chain. (13 sts: 7 sts + 6 ch) The ch-6 hangs over the gap and covers positions 8–13. Let it lie flat without stretching it.

Row 6 (B): Join B in position 1. Ch 1, sc in same st, sk 2, shell in sc (position 4), sk 2, sc in last dc of half shell (position 7), sk 2 ch, shell in next ch (position 10), sk 2 ch, sc in last ch (position 13). Fasten off. (13 sts: 2 shells + 3 sc)

Row 7 (A): Repeat Row 3. (13 sts)

This completes the middle bar. You should now see a notch about 1 in (2.5 cm) deep on the left side.

Row 8 (B), left half only: Join B in position 7 (the center dc of the full shell). Ch 1, sc in same st, sk 2, shell in sc (position 10), sk 2, sc in last dc (position 13). Fasten off. (7 sts: 1 shell + 2 sc) Positions 1–6 stay unworked and become the floor of the upper opening.

Row 9 (A), bridge plus left half: Make a slip knot on the hook with A and ch 6. These chains are positions 1–6. Work a half shell (3 dc) in the first sc of Row 8 (position 7), sk 2, sc in center dc of shell (position 10), sk 2, half shell in last sc (position 13). Fasten off. (13 sts: 6 ch + 7 sts)

Row 10 (B): Join B in the first ch of Row 9, which is the chain next to the slip knot (position 1). Ch 1, sc in same ch, sk 2 ch, shell in next ch (position 4), sk 2 ch, sc in first dc of half shell (position 7), sk 2, shell in sc (position 10), sk 2, sc in last dc (position 13). Fasten off. (13 sts)

Row 11 (A): Repeat Row 3. Fasten off. (13 sts)

The top bar is now complete. The body measures 2.25 × 3.5 in (5.7 × 8.9 cm). It has a notch opening to the left in the lower half and one opening to the right in the upper half. Weave in all tails on the WS, keeping each tail inside a stripe of its own color.

Daisies (make 3)

Center (A): Make a magic ring, ch 1, 5 sc in ring, sl st to first sc. Pull the ring closed and fasten off. (5 sc)

Petals (C): Join C in any sc. *(Sl st, ch 2, 2 dc, ch 2, sl st) in same sc, move to next sc; repeat from * 4 more times. Fasten off, leaving an 8 in (20.3 cm) tail for sewing. (5 petals)

Each daisy measures 0.75 in (1.9 cm) across.

Leaves (make 6)

With D: Ch 5. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in last ch. Rotate to work along the free loops of the chain: sc in same ch, hdc in next, sc in next, sl st in last. Fasten off, leaving a 6 in (15.2 cm) tail. (8 sts)

Each leaf measures 0.5 in (1.3 cm) long.

Border

Border gauge: Work 1 sc in each stitch or chain along the top and bottom edges. Along the sides, work 2 sc per shell-row end and 1 sc per sc-row end or chain end. Work 3 sc in each of the 4 outer bar corners, and 2 sc in each of the 4 corners where an opening begins.

Border Round (A): With RS facing, join A in position 1 of Row 11 (top right corner). Work counterclockwise:

  1. Top edge: 3 sc in position 1, sc in positions 2–12, 3 sc in position 13. (17 sc)
  2. Left side, top and middle bars: Work down the row ends of Rows 11, 10, 9, 8, 7 and 6 (2 sc each), then 1 sc in the chain end of Row 5. (13 sc)
  3. Lower opening, ceiling: Work into the free loops of the Row 5 chain: 2 sc in position 13, sc in positions 12–8. (7 sc)
  4. Lower opening, wall: 3 sc evenly down the left edges of Rows 5 and 4. (3 sc)
  5. Lower opening, floor: Work along the top of Row 3: sc in positions 8–12, 2 sc in position 13. (7 sc)
  6. Left side, bottom bar: 2 sc in each row end of Rows 3 and 2, 1 sc in the end of Row 1. (5 sc)
  7. Bottom edge: Work into the foundation chain: 3 sc in position 13, sc in positions 12–2, 3 sc in position 1. (17 sc)
  8. Right side, bottom and middle bars: 1 sc in the end of Row 1, then 2 sc in each row end of Rows 2–7. (13 sc)
  9. Upper opening, floor: Work along the top of Row 7: 2 sc in position 1, sc in positions 2–6. (7 sc)
  10. Upper opening, wall: 3 sc evenly up the right edges of Rows 8 and 9. (3 sc)
  11. Upper opening, ceiling: Work into the free loops of the Row 9 chain: sc in positions 6–2, 2 sc in position 1. (7 sc)
  12. Right side, top bar: 1 sc in the chain end of Row 9, then 2 sc in each row end of Rows 10 and 11. (5 sc)

Sl st to the first sc and fasten off. Total: 104 sc.

Why the math works: The top and bottom edges each have 13 stitches, matched 1 to 1, so the width stays at 2.25 in (5.7 cm) plus the border. Each shell row is 0.325 in (0.8 cm) tall. At about 5.8 sc per inch, 2 sc cover 0.345 in (0.9 cm), which is close enough to sit flat without ruffling. The 3-sc corners turn the 90° outer corners. The 2-sc corners round off the mouths of the openings so they read as curves. The two sides mirror each other at 13 + 5 sc, and the two openings mirror each other at 7 + 3 + 7 sc, so the letter stays balanced.

Final Blocking

  1. Weave in the border tail.
  2. Lay the letter RS up on a blocking surface.
  3. Pin it to 2.5 × 3.75 in (6.4 × 9.5 cm), with the bars straight and the openings even.
  4. Gently ease each shell into a fan shape with your fingertips.
  5. Mist it with water, or steam it lightly from above without letting the iron touch the yarn. Let it dry completely.
  6. Pin the daisies to 0.75 in (1.9 cm) and pin the leaves flat. Mist them and let them dry.
  7. Sew one daisy on the right end of the top bar, one on the middle diagonal and one on the lower left of the bottom bar. Tuck 2 leaves under the edge of each daisy. Stitch through the center and the base of each petal, keeping the stitches hidden on the front.
  8. Open a jump ring and pass it through the center sc of the top-right 3-sc corner. Add the key ring chain and close the jump ring. If the chain is too short, use the second jump ring as an extra link.

Final Quality-Control Checklist

  • Letter measures 2.5 × 3.75 in (6.4 × 9.5 cm)
  • Every full-width row has 13 sts and every half row has 7 sts
  • Stripes alternate yellow and blue, starting and ending with yellow
  • The lower opening faces left and the upper opening faces right
  • Border has 104 sc and lies flat, with no ruffles or cupping
  • All 3 daisies have 5 even petals and 2 leaves each
  • Tails are secure and hidden on the WS
  • Jump ring is fully closed with no gap

Troubleshooting

Shells look squashed: Your tension is tight. Go up 0.25 mm in hook size or loosen your dc.

Chain bridge sags or pulls: The ch-6 should be the same width as 6 stitches. If it isn’t, redo it with a slightly looser or tighter chain.

Border ruffles on the sides: Work 3 sc over every 2 shell-row ends instead of 4, and keep the corners as written.

Border cups or puckers: Add 1 sc at each 3-sc corner, or work the border with a hook 0.25 mm larger.

Openings close up: Keep each wall at exactly 3 sc and don’t pull those stitches tight.

Daisy petals flare: Tighten the closing sl st of each petal and block the daisy flat.

Care

Hand wash in cool water with mild soap, roll it in a towel to press out the water and dry flat. Remove the metal key ring before washing.

Denim tote bag with crocheted 'S' keychain featuring yellow, blue, and white flowers, displayed hanging on outdoor wooden chair.

Final Notes

Here is how the measurements build up. Your 3-row gauge bar sets the width at 2.25 in (5.7 cm). The 11 rows bring the body to 3.5 in (8.9 cm) tall. The 104-stitch border adds 0.125 in (0.3 cm) per side, for a finished size of 2.5 × 3.75 in (6.4 × 9.5 cm). Add three 0.75 in (1.9 cm) daisies and a key ring, and your sunny letter is ready to clip onto a bag.

Happy crocheting!

Leave a Comment