Teal Trellis Two-Tier Hanging Basket Crochet Pattern

This two-tier hanging basket holds a spare toilet roll in each tier and saves floor and shelf space in a small bathroom. Each basket has a solid round base, a short knit-look band, two open diamond lattices, and a rim of round popcorn bobbles. Two flat straps link the baskets and meet in a neat triangle at the top, so the whole piece hangs from a single peg or hook.

The sample is worked in deep teal cotton, which looks fresh against light walls and stands up well to bathroom humidity. Cream, sage, or charcoal work just as well, because the texture comes from the stitches, not from color changes. The style is somewhere between macramé and classic crochet, and it suits boho or farmhouse rooms.

This pattern uses US crochet terms. The finished hanger is about 5.75 in (14.6 cm) wide and about 21 in (53.3 cm) tall from the bottom of the lower basket to the top of the triangle. Each basket is 5.5 in (14.0 cm) across at the base and 3.5 in (8.9 cm) tall.

Here is the construction in brief. You work each basket from the center out in joined rounds, turn the wall up with a back-loop round, and build the lattice and popcorn rounds on a 6-stitch repeat. Then you crochet two straps in rows and sew them to the outside of both baskets. Finally, you overlap the strap ends at the top to form the hanging point.

Finished Size and Construction

  • Finished size: 5.75 in (14.6 cm) wide × 21 in (53.3 cm) tall
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: US H-8 (5.0 mm)
  • Number of pieces: 4 (2 baskets, 2 straps)
  • Layout: 2 baskets stacked vertically, 4 in (10.2 cm) apart, joined by 2 straps
  • Piece size: each basket has a 5.5 in (14.0 cm) base and a 3.5 in (8.9 cm) wall; each strap is 0.7 in × 22 in (1.8 cm × 55.9 cm)
  • Size before border: wall height 3.2 in (8.1 cm) after Rnd 23
  • Border depth: popcorn rim adds 0.3 in (0.8 cm)

Materials

Use a smooth worsted-weight cotton or cotton blend. Cotton holds its shape under the weight of a roll and keeps the lattice crisp. Avoid fuzzy acrylic, because it blurs the popcorns and stretches over time.

  • Teal (Main Color): 100 g, about 190 m (208 yd) in total
  • Each basket: about 35 g / 66 m
  • Each strap: about 10 g / 19 m

These quantities include a margin of roughly 10%, so you have enough for a gauge swatch and sewing tails.

Tools:
– US H-8 (5.0 mm) crochet hook
– Locking stitch markers (at least 4)
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a blocking surface
– One toilet roll or a 4.5 in (11.4 cm) jar to use as a shaping form

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • inc – 2 sc in the same stitch
  • blo – back loop only
  • sk – skip
  • st(s) – stitch(es)
  • rnd – round
  • ksc (knit stitch / waistcoat stitch) – Insert the hook through the center of the “V” of the stitch below, between its two legs, yarn over and pull up a loop, then yarn over and pull through 2 loops. This makes the knit-look band.
  • pc (popcorn) – Work 4 dc in the same stitch. Remove the hook from the loop, insert it from front to back through the top of the first dc, pick up the dropped loop and pull it through, then ch 1 to close. The pc counts as 1 stitch.

Gauge and Checkpoints

Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) in sc.

Make one full basket before you start the second one and check it against these measurements:

  • After Rnd 6 (36 sts): base diameter 2.75 in (7.0 cm)
  • After Rnd 12 (72 sts): base diameter 5.5 in (14.0 cm), lying flat
  • After Rnd 16: wall height 0.9 in (2.3 cm)
  • After Rnd 20: wall height 2.2 in (5.6 cm)
  • After Rnd 23: wall height 3.2 in (8.1 cm)
  • After Rnd 25: wall height 3.5 in (8.9 cm)

If your base is too big (more than 5.75 in / 14.6 cm), go down half a hook size. If it’s too small (less than 5.25 in / 13.3 cm), go up half a hook size. If the base ruffles, your increases are outpacing your stitch height, so tighten slightly. If it cups, loosen up. A standard roll is about 4.5 in (11.4 cm) across, so the base needs some extra room.

Teal crochet rope with textured knots in foreground, geometric cream diamond and triangle pattern in background.

Basket (Make 2)

Work in joined rounds with the right side facing throughout. The beginning ch 1 does not count as a stitch. Join each round with a sl st to the first stitch.

Base

Rnd 1: Make a magic ring and work 6 sc in the ring, then join. (6 sts)

Rnd 2: Ch 1, then inc in each st around and join. (12 sts)

Rnd 3: Ch 1, sc in next st, inc in next st; repeat from * 6 times total and join. (18 sts)

Rnd 4: Ch 1, sc in next 2 sts, inc in next st; repeat from * 6 times total and join. (24 sts)

Rnds 5–12: Keep increasing 6 times per round, working 1 more plain sc before each inc than in the round before. On even rounds, start with half the plain stitches so the increases are staggered and the circle stays round.

  • Rnd 5: 30 sts
  • Rnd 6: 36 sts
  • Rnd 7: 42 sts
  • Rnd 8: 48 sts
  • Rnd 9: 54 sts
  • Rnd 10: 60 sts
  • Rnd 11: 66 sts
  • Rnd 12: sc in next 10 sts, inc in next st × 6 (72 sts)

Checkpoint: The base should lie flat and measure 5.5 in (14.0 cm) across.

Wall

Rnd 13 (turning ridge): Ch 1, then sc blo in each st around and join. (72 sts) The unused front loops make the ridge where the wall turns up.

Rnds 14–16 (knit-look band): Ch 1, then ksc in each st around and join. (72 sts per round)

Checkpoint: The wall should be 0.9 in (2.3 cm) tall.

Rnd 17 (lattice A): Ch 1, sc in the first st, ch 6, sk 5 sts, sc in next st; repeat from * 11 times, then ch 6, sk the last 5 sts and join to the first sc. (12 sc, 12 ch-6 loops) Each repeat uses 6 base stitches: 12 × 6 = 72.

Rnd 18 (lattice B): Sl st in the next 3 ch to reach the center of the first loop. Ch 1 and sc in the same loop, ch 6, sc in next ch-6 loop; repeat from * 11 times, then ch 6 and join to the first sc. (12 sc, 12 ch-6 loops) The offset loops form the diamond trellis.

Rnd 19 (solid band): Ch 1, work 6 sc in each ch-6 loop around and join. (12 loops × 6 sc = 72 sts)

Rnd 20 (popcorn ring): Ch 1, pc in next st, sc in next 5 sts; repeat from * 12 times total and join to the top of the first pc. (12 pc + 60 sc = 72 sts)

Checkpoint: The wall should be 2.2 in (5.6 cm) tall.

Rnd 21 (lattice A): Ch 1, sc in the top of the first pc, ch 6, sk 5 sc, sc in the next pc; repeat from * 11 times, then ch 6, sk 5 sc and join. (12 sc, 12 ch-6 loops) Each sc sits on a popcorn, so the lattice lines up with the bobbles.

Rnd 22 (lattice B): Work as for Rnd 18. (12 sc, 12 ch-6 loops)

Rnd 23 (solid band): Work as for Rnd 19. (72 sts)

Checkpoint: The wall should be 3.2 in (8.1 cm) tall. Don’t fasten off. Go straight on to the rim edging in the Border section below.

Strap (Make 2)

Ch 89.

Row 1: Sc in the 2nd ch from the hook and in each ch across, then turn. (88 sts)

Rows 2–3: Ch 1, sc in each st across, then turn. (88 sts per row)

Fasten off and leave a 20 in (50.8 cm) tail for sewing.

Checkpoint: Each strap should measure 0.7 in × 22 in (1.8 cm × 55.9 cm). Work the foundation chain at the same tension as your stitches. A tight chain will make the strap curve.

Make All Pieces

All pieces are in Teal:

  • Baskets: 2 (about 35 g / 66 m each)
  • Straps: 2 (about 10 g / 19 m each)

Layout (front view):

            /\
           /  \        <- strap ends overlap 0.5 in (1.3 cm)
          /    \       <- 10.5 in (26.7 cm) free strap run
         /      \
        |[TOP  ]|      <- top basket, 3.5 in (8.9 cm)
        |       |      <- 4 in (10.2 cm) gap
        |[BOTTOM]|     <- bottom basket, 3.5 in (8.9 cm)
     Strap A    Strap B

Joining

Method: Whipstitch with the strap tails, using a tapestry needle.

Placement: Lay each basket flat with the joins at the back. Mark st 4 and st 40 of Rnd 24. Each one sits halfway between two popcorns (pcs fall on sts 1, 7, 13, 19, 25, 31, 37, 43, 49, 55, 61, 67), and they are exactly 36 sts apart, which is half of 72. Mark the same two columns on the second basket.

Stitch-to-stitch logic: The strap is 0.7 in (1.8 cm) wide, so it covers about 3 basket stitches: sts 3–5 or sts 39–41. Sew along both long edges of the strap. In solid rounds, catch 1 basket stitch for each strap stitch. In lattice rounds, catch the chain loop that crosses that column instead. The strap has 4 sts per inch and the basket has 4.5 rnds per inch, which is close enough to ease without puckering.

  1. Bottom basket: Line up one strap end with the Rnd 13 ridge at st 4 and sew it up the outside of the wall to the rim. This uses 3.5 in (8.9 cm) of strap. Repeat with the second strap at st 40.
  2. Gap: Measure 4 in (10.2 cm) of free strap above the bottom rim on each side. Pin it, keeping the strap straight and untwisted.
  3. Top basket: Line up the top basket’s ridge at sts 4 and 40 with the pins and sew it on exactly as for the bottom basket. This uses another 3.5 in (8.9 cm).
  4. Apex: About 11 in (27.9 cm) of each strap is left. Bring the two ends together above the top basket, overlap the last 0.5 in (1.3 cm), and whipstitch around all 4 edges. That leaves 10.5 in (26.7 cm) of free strap on each side.

Tension: Sew firmly but don’t cinch. The stitches should hold the strap flat without pulling the basket wall inward.

Size checkpoint: Hang the piece up. It should be about 21 in (53.3 cm) tall overall, with the triangle about 10 in (25.4 cm) tall and the baskets level.

Border (Popcorn Rim)

Each basket gets the rim edging, worked straight on from Rnd 23.

Border gauge: Same as the main gauge. The popcorn round is about 0.2 in (0.5 cm) taller than a sc round.

Rnd 24 (popcorn rim): Ch 1, pc in next st, sc in next 5 sts; repeat from * 12 times total and join. (12 pc + 60 sc = 72 sts)

Rnd 25 (finishing round): Ch 1, sl st loosely in each st around, including the pc tops, then join and fasten off. (72 sts)

Why the math works: Every wall round has 72 stitches, which is 12 repeats of 6. Each lattice loop spans exactly one repeat. The 6 sc packed into each loop rebuild 72 stitches, and each popcorn round places 1 pc per repeat. Because nothing is added or lost between rounds, the wall rises straight with no flare. The rim adds 0.3 in (0.8 cm) to the 3.2 in (8.1 cm) wall, giving 3.5 in (8.9 cm).

Weave in all ends inside the basket. Do this before sewing on the straps if you prefer.

Final Blocking

  1. Lightly mist both baskets with water, or soak them and gently squeeze out the water.
  2. Slide a toilet roll (or a 4.5 in / 11.4 cm jar) wrapped in a plastic bag into each basket.
  3. Pull the lattice loops evenly so every diamond is the same size.
  4. Pinch each popcorn so it sits round and points outward.
  5. Lay the straps flat and pin them straight at 0.7 in (1.8 cm) wide.
  6. Leave everything to dry completely, which takes about 24 hours.
  7. Remove the forms and hang the piece to check it is level.

Final Quality-Control Checklist

  • Both bases are 5.5 in (14.0 cm) across and lie flat
  • Both walls are 3.5 in (8.9 cm) tall
  • Each basket has 12 popcorns on the middle ring and 12 on the rim
  • Both lattice bands have 12 even diamonds
  • The straps are centered between popcorns, opposite each other
  • The gap between the baskets is 4 in (10.2 cm) on both sides
  • The apex overlap is 0.5 in (1.3 cm) and sewn on all edges
  • The baskets hang level, with no twist in the straps
  • All ends are woven in securely

Troubleshooting

  • Base cups: Your stitches are too tight for the increase rate. Go up a hook size or loosen your tension.
  • Base ruffles: Your tension is too loose. Go down half a size.
  • Wall flares outward: You probably added stitches in a band round. Recount to 72.
  • Lattice is uneven: Check that you skipped exactly 5 sts each time and that every loop is exactly 6 ch.
  • Popcorns point inward: Insert the hook from front to back when closing each pc.
  • Strap curls: The foundation chain was too tight. Remake it with a larger hook for the chain only.
  • Baskets hang crooked: Re-measure the 4 in (10.2 cm) gap on each side and re-sew.

Care

Hand wash in cool water, reshape while damp, and lay flat to dry. Take the rolls out before washing.

Dark teal crocheted toilet paper holder with diamond openwork holding white rolls in a bright, modern bathroom.

Final Notes

The measurement chain goes like this:

  • A gauge of 16 sc and 18 rnds per 4 in (10.2 cm) gives a 72-stitch base that is 5.5 in (14.0 cm) across.
  • That base supports a 3.2 in (8.1 cm) wall built on 12 even repeats.
  • The popcorn rim brings each basket to 3.5 in (8.9 cm).
  • Two 22 in (55.9 cm) straps cover both baskets, the 4 in (10.2 cm) gap, and a 10.5 in (26.7 cm) run on each side to the apex.

Together these give a hanger about 21 in (53.3 cm) tall. Check each stage and the finished piece will fit together.

Happy crocheting!

Leave a Comment