This hanging toilet paper holder has three fan-stitch baskets stacked on one filet-mesh strap. Each basket holds a standard roll, and the open mesh keeps the piece light enough to hang from a single towel hook.
The colors are warm cream and rust/terracotta. The baskets have rows of cream fans outlined in rust and a soft scalloped rim. The style is boho bathroom: textured but neat.
This pattern uses US crochet terms. The finished holder is about 6 in (15.2 cm) wide at the baskets and about 19.75 in (50.2 cm) tall from the top of the ring to the bottom of the strap. Each basket is 6 in (15.2 cm) across and about 3 in (7.6 cm) tall.
Each basket starts as a flat round base. You then work the wall upward from the free back loops of the base’s last round, so the base and wall are one piece. The strap is worked in rows of filet mesh and gets a single-crochet edging. You cover a ring in single crochet, sew the strap to the ring, then sew on the baskets.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide x 19.75 in (50.2 cm) tall
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 5 (3 baskets, 1 strap, 1 covered ring)
- Layout: 3 baskets stacked vertically on 1 strap
- Piece size: each basket is 6 in (15.2 cm) across x 3 in (7.6 cm) tall; the strap is 4 in (10.2 cm) x 17 in (43.2 cm)
- Strap size before border: 4 in (10.2 cm) wide
- Border depth: 0.25 in (0.6 cm) on every edge, so the strap is 4.5 in (11.4 cm) wide when finished
Materials
Use a smooth, firm 100% cotton or cotton blend in worsted weight. Cotton keeps the baskets upright. Acrylic will sag under the weight of the rolls.
- Color A, Cream: 150 g, about 255 m
- Color B, Rust: 75 g, about 128 m
These amounts include a margin of about 25% above what the piece actually uses.
Tools:
– 5.0 mm (H-8) crochet hook
– 1 metal or plastic ring, 2.75 in (7.0 cm) across
– Tapestry needle
– Stitch markers
– Scissors
– Rust-proof pins and a blocking mat
– Spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- sp – space
- BLO / FLO – back loop only / front loop only
- Rnd – round
Fan: work 9 dc into the same stitch.
Mesh square: a dc, then ch 1, then a dc. Neighboring squares share their dc.
Gauge and Checkpoints
Gauge:
– 16 sc and 16 rows = 4 in (10.2 cm)
– 14 dc and 8 rows = 4 in (10.2 cm)
– 7 filet mesh squares = 4 in (10.2 cm) wide, and each mesh row is 0.5 in (1.3 cm) tall
Make one complete basket before you start the others. It shows your gauge in all three textures.
Checkpoints:
– Base Rnd 1: 1.5 in (3.8 cm) across
– Base Rnd 3: 3.5 in (8.9 cm) across
– Base Rnd 5: 5.5 in (14.0 cm) across
– Base Rnd 6: 6 in (15.2 cm) across
– Wall band, after Rnd 10, measured flat across the basket: 9 in (22.9 cm)
– Finished wall: 2.75 in (7.0 cm) tall from the base fold to the tips of the scallops
– Strap Rows 1–4: 4 in (10.2 cm) wide x 2 in (5.1 cm) tall
If your piece is too big: go down 0.5 mm in hook size. If it is too small: go up 0.5 mm. Don’t change any stitch counts. All of the joining math depends on them.

Basket (Make 3)
Base
Start with Color A.
Rnd 1: Make a magic ring. Ch 3 (counts as a dc here and in every round after this one). Work 11 dc in the ring and join with a sl st to the top of the ch-3. Pull the ring closed. (12 sts)
Rnd 2: Ch 3. Work 1 dc in the same st, then 2 dc in each st around. Join. (24 sts)
Rnd 3: Ch 3. Work 2 dc in the next st. Dc in the next st, 2 dc in the next st; repeat from * around. Join. (36 sts)
Rnd 4: Ch 3. Dc in the next st, 2 dc in the next st. Dc in each of the next 2 sts, 2 dc in the next st; repeat from * around. Join. (48 sts)
Rnd 5: Ch 3. Dc in each of the next 2 sts, 2 dc in the next st. Dc in each of the next 3 sts, 2 dc in the next st; repeat from * around. Join. (60 sts) Fasten off Color A.
Rnd 6 (conversion round): Join Color B in any st and ch 1. Sc in each of the next 4 sts, 2 sc in the next st; repeat from * 12 times. Join to the first sc. (60 sc worked 1 per stitch + 12 extra = 72 sts)
Rnd 7 (scallop edge): Work this round in FLO only. Sk 1 st, work 5 dc in the next st, sk 1 st, sl st in the next st; repeat from * 18 times. (18 scallops: 90 dc + 18 sl st) Fasten off.
Rnd 7 uses only the front loops, so the back loops of Rnd 6 stay free. You will build the wall from those 72 back loops.
Wall
Rnd 8: Join Color B in any free back loop of Rnd 6 and ch 1. Work 1 sc in each free back loop around. Join. (72 sts)
Now fold the Rnd 7 scallops upward. They lie against the outside of the rust band.
Rnds 9–10: Ch 1. Sc in each st around. Join. (72 sts) Fasten off Color B.
Rnd 11 (first fan round): Join Color A in any st and ch 1. Sc in the same st. Sk 3 sts, work a fan in the next st, sk 3 sts, sc in the next st; repeat from * around. Leave out the final sc and join to the first sc instead. (9 fans + 9 sc = 90 sts) Fasten off.
Rnd 12 (outline round): Join Color B in the first sc of Rnd 11 and ch 1. Sc in each st around. Join. (90 sts) Fasten off.
This round outlines each fan in rust. Each 10-stitch repeat now has 1 sc above the valley of Rnd 11, followed by 9 sc across the top of the fan. The 5th of those 9 is the center of the fan.
Rnd 13 (offset fan round): Join Color A in the first st of Rnd 12, which sits above a valley. Ch 3 and work 8 dc in the same st. Sk 4 sts, sc in the next st (the center of the fan below), sk 4 sts, work a fan in the next st; repeat from * around. Leave out the final fan and join to the top of the ch-3. (9 fans + 9 sc = 90 sts) Fasten off.
Rnd 14 (outline round): Join Color B in the top of the ch-3 and ch 1. Sc in each st around. Join. (90 sts) Fasten off.
Rnd 15 (scalloped rim): Join Color A in the 10th st of Rnd 14, which is the sc above a valley, and ch 1. Sc in the valley st, sk 1 st, hdc in the next st, dc in the next st, 2 dc in the next st, 3 dc in the next st, 2 dc in the next st, dc in the next st, hdc in the next st, sk 1 st; repeat from * around. Join. (Each repeat uses 10 sts and makes 12, so 9 scallops = 108 sts.) Fasten off and weave in all ends.
Each rim scallop sits directly above a fan from Rnd 13. Checkpoint: the basket is 6 in (15.2 cm) across, and the wall is 2.75 in (7.0 cm) tall.
Strap
Use Color A.
Foundation: Ch 18.
Row 1: Dc in the 6th ch from the hook. The 5 skipped chains count as the first dc, a ch-1, and 1 skipped ch. Ch 1, sk 1 ch, dc in the next ch; repeat from * to the end. Turn. (7 squares = 15 sts)
Rows 2–26: Ch 4 (counts as a dc plus ch 1). Sk the ch-sp and dc in the next dc. Ch 1, sk the ch-sp, dc in the next dc; repeat from * across, working the last dc in the 3rd ch of the turning chain. Turn. (15 sts)
Checkpoint: after Row 26 the strap measures 4 in (10.2 cm) x 13 in (33.0 cm).
Taper
Row 27 (decrease): Sl st in the first ch-sp and in the next dc. Ch 4, sk the ch-sp, dc in the next dc. Work in pattern until 1 square remains, and leave that last square unworked. Turn. (5 squares = 11 sts)
Row 28: Work even. (11 sts)
Row 29: Decrease as in Row 27. (3 squares = 7 sts)
Row 30: Work even. (7 sts)
Row 31: Decrease as in Row 27. (1 square = 3 sts)
Rows 32–34: Work even. (3 sts) Do not fasten off. Go straight on to the border.
Checkpoint: the strap is 17 in (43.2 cm) long, and the taper is 4 in (10.2 cm) of that.
Covered Ring
Join Color B to the ring with a sl st. Work sc around the ring until it is fully covered, about 48 sc. If you need to adjust, add or remove stitches 2 at a time so the coverage stays snug and even. Join, then leave a 12 in (30.5 cm) tail.
Make All Pieces
- Baskets: 3, each made with Color A (Rnds 1–5, 11, 13, 15) and Color B (Rnds 6–10, 12, 14)
- Strap: 1, in Color A
- Covered ring: 1, in Color B
Layout (front view, from top to bottom):
[ RING ]
/\
/ \ taper, Rows 27-34
| | Rows 25-26 (exposed)
[ BASKET 3 ] Rows 19-24
| | Rows 16-18 (gap)
[ BASKET 2 ] Rows 10-15
| | Rows 7-9 (gap)
[ BASKET 1 ] Rows 1-6
Each basket covers 6 rows, which is 3 in (7.6 cm). Each gap is 3 rows, which is 1.5 in (3.8 cm).
Joining
Method: whipstitch with the matching color, going through both loops.
- Ring: Fold the top 0.5 in (1.3 cm) of the strap (Row 34 plus its border) over the bottom of the covered ring, toward the back. Whipstitch it down with Color A. Then use the ring’s tail to sew 3 more stitches through the fold for strength.
- Basket bands: Lay the strap face up. Put Basket 1 on it so the bottom of the base lines up with the bottom border.
- Stitch-to-stitch matching: Choose 17 sts of Rnd 9 on the back of the basket. Sew them one-to-one to the 17 stitches across the top of strap Row 1. Those 17 are the strap’s 15 sts plus the 1 border sc at each side. At 4 sc per in, 17 band sts cover 4.25 in (10.8 cm), so the back of the basket flattens a little against the strap.
- Basket rims: Tack Rnd 14 to the strap border at both side edges of Row 5, using 4 stitches on each side.
- Repeat for Basket 2 (band to Row 10, rim to Row 14) and Basket 3 (band to Row 19, rim to Row 23).
Tension: keep each stitch firm but flat. If the mesh squares start to pucker, you are pulling too tight.
Checkpoint: the gaps between baskets are 1.5 in (3.8 cm), and the holder measures 19.75 in (50.2 cm) from the top of the ring to the bottom.
Border (Strap Edging)
Work the border before you join anything. With Color A still attached at the top of Row 34, ch 1 and work 1 round of sc around the whole strap.
Border gauge: 4 sc per in (2.5 cm). Work 2 sc into the end of each mesh row and 1 sc into each stitch along a horizontal edge.
- Top edge (Row 34): 3 sc
- Each taper edge (Rows 34–27): 16 sc into the row ends (8 rows x 2) + 6 sc along the 3 stepped ledges (2 sts per ledge x 3) = 22 sc
- Each long side (Rows 26–1): 26 rows x 2 = 52 sc
- Bottom edge: 15 sc, 1 into each foundation stitch. This count includes the 2 corner stitches. Work 2 extra sc into each of those corner stitches, so each corner holds 3 sc.
Total: 3 + 22 + 52 + 15 + 4 corner extras + 52 + 22 = 170 sc. Join and fasten off.
Why the math works: each mesh row is 0.5 in (1.3 cm) tall, and 2 sc at 4 sc per in also make 0.5 in. The side edges therefore stay flat and don’t ruffle. The 4 extra corner stitches let the bottom corners turn cleanly. The sc round adds 0.25 in (0.6 cm) to each side, which brings the strap from 4 in (10.2 cm) to 4.5 in (11.4 cm) wide.
Final Blocking
- Spray the whole holder until it is damp but not soaked.
- Pin the strap flat at 4.5 in (11.4 cm) wide, keeping the mesh squares square.
- Fill each basket with a toilet roll, or a jar about 4.5 in (11.4 cm) across, so the walls stay round.
- Pin out the tips of the rim scallops evenly.
- Press the folded base scallops flat against the rust band.
- Let everything dry completely, usually 12–24 hours, before you hang it.
Final Quality-Control Checklist
- Each basket has 72 sts at the band and 108 sts at the rim.
- All 9 fans in each fan round are the same size.
- The rim scallops sit directly over the Rnd 13 fans.
- The strap is 4.5 in (11.4 cm) wide and its squares are even.
- All three baskets are level, and both gaps are 1.5 in (3.8 cm).
- The ring is covered completely, with no metal or plastic showing.
- Every end is woven in at least 1.5 in (3.8 cm) and hidden in matching color.
Troubleshooting
- The base ruffles: your dc stitches are too loose. Use a hook one size smaller for the base only.
- The base cups: your stitches are too tight. Use a hook one size larger for the base only.
- The basket flares at the top: this is normal for Rnds 11–15. If it is more than 0.5 in (1.3 cm), work Rnds 12 and 14 with a hook one size smaller.
- The fans don’t line up: recount Rnd 12. It must have exactly 90 sts.
- The strap twists: you probably missed the turning-chain dc at the end of some rows. Count 15 sts on every row from 1 to 26.
- The strap edging ruffles: you are working 3 sc into some row ends. Keep it to exactly 2.
- The baskets tilt forward: add more rim tacks on each side.
Care
Hand wash in cool water with mild soap. Roll it in a towel to remove water, then dry it flat with the baskets stuffed so they hold their shape.

Final Notes
Here is the measurement chain for the whole piece. The base reaches 6 in (15.2 cm) across at 72 sts. That 72 carries straight into the band, which grows to 90 sts for the fan rounds and 108 sts at the rim, giving a wall 2.75 in (7.0 cm) tall. The strap is 7 squares, or 4 in (10.2 cm), wide. Its edging brings it to 4.5 in (11.4 cm), and each basket is sewn to 17 of its stitches. Three 3 in (7.6 cm) baskets with 1.5 in (3.8 cm) gaps fit on the 13 in (33.0 cm) straight section. Check each measurement as you go, and the pieces will fit together without any adjustments.
Happy crocheting!