This hanging toilet paper holder has two round baskets, one above the other, on a single cream strap that loops over a wall hook. Each basket has a solid round base and an openwork wall of diagonal bands that spiral around the cylinder. Tan bands frame the top and bottom of every basket.
The palette is soft and neutral: warm cream for the bases, the lattice, and the strap, with a sandy tan for the rims. The open lattice keeps the holder light and lets you see when a roll is running low, and the tan rims give each tier a tidy, finished look.
The pattern uses US crochet terms. Each basket measures about 5.75 in (14.6 cm) across and 4.75 in (12.1 cm) tall, which fits a standard 4.5 in (11.4 cm) roll with room to spare. When hung, the holder is about 23 in (58.4 cm) long from the top of the loop to the bottom of the lower basket.
You work each basket in one continuous piece. Start with a flat base in joined rounds, turn the wall up in tan, work seven rounds of a shifting double crochet lattice, and finish with a tan rim. The strap is a simple three-row single crochet band. Fold it in half, form the loop, and sew it to both baskets.
Finished Size and Construction
- Basket size: 5.75 in (14.6 cm) diameter × 4.75 in (12.1 cm) tall
- Hanging length: about 23 in (58.4 cm)
- Skill level: Easy–Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 3 (2 baskets + 1 strap)
- Layout: 2 baskets stacked vertically, 3 in (7.6 cm) apart
- Piece size: base 5.75 in (14.6 cm) across; strap 47 in × 0.7 in (119.4 cm × 1.8 cm)
- Size before border: wall 4 in (10.2 cm) tall after the last lattice round
- Border depth: top rim 0.7 in (1.8 cm); bottom band 0.5 in (1.3 cm)
Materials
Use a smooth worsted-weight cotton or cotton blend. Cotton holds its shape in a humid bathroom and stitches stay crisp. The amounts below assume about 170 m (186 yd) per 100 g.
- Cream (Color A): 110 g, about 187 m (205 yd), for the bases, lattice walls, and strap
- Tan (Color B): 35 g, about 60 m (66 yd), for the bottom bands, bottom piping, and top rims
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- 4 locking stitch markers
- Scissors
- Measuring tape
- Rust-proof pins and a blocking mat or towel
- Spray bottle
All yarn quantities include a margin of about 25% for your gauge swatch and for any differences in tension.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sk – skip
- BLO – back loop only
- FL – front loop
- rep – repeat
- rnd(s) – round(s)
Special stitch – reverse sc (crab stitch): Working from left to right (right-handed), insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops. This makes a twisted, beaded edge.
Gauge and Checkpoints
Gauge: 16 sc and 18 rnds = 4 in (10.2 cm). In the lattice, 8 dc rounds = 4 in (10.2 cm), so each dc round is about 0.5 in (1.3 cm) tall.
Make one complete basket before starting the second. A finished basket is the best gauge test, because it shows your sc, dc, and rim tension together.
Checkpoints:
- After Rnd 6 (36 sts), the base measures about 2.75 in (7.0 cm) across.
- After Rnd 12 (72 sts), the base measures 5.75 in (14.6 cm) across and lies flat.
- After Rnd 14, the tan wall stands about 0.5 in (1.3 cm) tall.
- After Rnd 21, the wall measures about 4 in (10.2 cm) tall.
- After Rnd 25, the basket is 4.75 in (12.1 cm) tall.
If your base is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. If the base ruffles, your increases are too loose. If it cups, they are too tight. Fix flatness before you start the wall.

Basket (Make 2)
Base
Use Color A. Join every round with a sl st to the first sc. The ch 1 at the start of each round does not count as a stitch. Joined rounds give the concentric rings you see in the finished base.
Rnd 1: Make a magic ring, ch 1, 6 sc in ring. Join. (6 sts)
Rnd 2: Ch 1, 2 sc in each st around. Join. (12 sts)
Rnd 3: Ch 1, sc in next st, 2 sc in next st; rep from * around. Join. (18 sts)
Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st; rep around. Join. (24 sts)
Rnd 5: Ch 1, sc in next 3 sts, 2 sc in next st; rep around. Join. (30 sts)
Rnd 6: Ch 1, sc in next 4 sts, 2 sc in next st; rep around. Join. (36 sts)
Rnds 7–12: Continue in the same way, working 1 more sc between increases each round. Each round adds 6 increases:
- Rnd 7: 42 sts
- Rnd 8: 48 sts
- Rnd 9: 54 sts
- Rnd 10: 60 sts
- Rnd 11: 66 sts
- Rnd 12: 72 sts
To keep the base round instead of hexagonal, move the increase to the middle of the repeat on even rounds. Fasten off Color A.
Bottom Band
Rnd 13: Join Color B in the BLO of any st. Ch 1, sc in the BLO of each st around. Join. (72 sts) This round turns the wall up and leaves a ring of cream front loops on the underside.
Rnd 14: Ch 1, sc in each st around. Join. (72 sts) Fasten off Color B.
Spiral Lattice Wall
Rnd 15 (setup): Join Color A in any st.
- Ch 3 (counts as dc) and dc in next 4 sts.
- Ch 3 and sk 3 sts.
- Dc in next 5 sts, ch 3, sk 3 sts; rep from * 8 more times.
- Sl st to top of beg ch-3.
You now have 9 groups: (45 dc) + (27 ch) = 72 sts.
Rnds 16–21 (shift rounds):
- Sl st in next 2 dc.
- Ch 3 (counts as dc) and dc in next 2 dc.
- Dc in each of the first 2 ch of the ch-3.
- Ch 3, then sk the last ch of the ch-3 and the first 2 dc of the next group.
- Dc in next 3 dc, dc in first 2 ch of the ch-3, ch 3, sk next ch and next 2 dc; rep from * 8 more times.
- Sl st to top of beg ch-3.
Each round has 9 groups: (45 dc) + (27 ch) = 72 sts.
Each shift round moves every solid group 2 sts to the left. Over six rounds, this stacks the groups into the slanted bands and diagonal open slots that make up the spiral. Work into the chain stitches themselves, not around the space, so each shift lands exactly 2 sts over.
Rnd 22 (trim round): Ch 1, sc in each dc and each ch around. Join. (45 sc in dc) + (27 sc in ch) = 72 sts. Fasten off Color A.
The wall now measures about 4 in (10.2 cm) from the base edge.
Make All Pieces
- Baskets: 2, worked the same way. Each uses about 45 g of Color A and 15 g of Color B, including the border.
- Strap: 1, in Color A, about 15 g.
Strap: Using Color A, ch 189.
Row 1: Sc in 2nd ch from hook and in each ch across. (188 sts)
Rows 2–3: Ch 1, turn, sc in each st across. (188 sts)
Fasten off. The strap measures 47 in × 0.7 in (119.4 cm × 1.8 cm). At 4 sts per inch, 188 sts = 47 in. If your foundation chain is tight, make the chain with a 5.5 mm hook.
Assembled layout:
( loop ) 2 in / 5.1 cm
| | 1 in / 2.5 cm joined
/ \ 8 in / 20.3 cm legs
| |
[ BASKET 1 ] 4.75 in / 12.1 cm
| | 3 in / 7.6 cm gap
[ BASKET 2 ] 4.75 in / 12.1 cm
Joining
Method: Whipstitch the strap to the baskets with Color A and a tapestry needle, working through both edges of the strap.
Stitch-to-stitch logic: Fold the strap in half and mark the center, between sts 94 and 95. Count outward from the center on each leg:
- Sts 1–8: the loop, 2 in (5.1 cm) per side.
- Sts 9–12: whipstitch both legs together, side by side, for 1 in (2.5 cm) to close the loop.
- Sts 13–44: free hanging leg, 8 in (20.3 cm).
- Sts 45–63: sew to the upper basket, 19 sts = 4.75 in (12.1 cm), the full basket height.
- Sts 64–75: free gap, 3 in (7.6 cm).
- Sts 76–94: sew to the lower basket, 19 sts = 4.75 in (12.1 cm).
Check: 8 + 4 + 32 + 19 + 12 + 19 = 94 sts per leg, and 94 × 2 = 188. ✓
On each basket, place 2 markers 36 sts apart in Rnd 22, so the legs sit exactly opposite each other (72 ÷ 2 = 36). Center each leg on its marker. Secure the strap firmly at the top rim (Rnds 23–25), at Rnd 22, and at the bottom band (Rnds 13–14). Tack it lightly to the solid dc bands in between.
Tension: Sew snugly but do not pull. The wall should stay straight, without dimples. Keep the strap flat against the wall, not twisted.
Size checkpoint: Hang the holder from a hook. The baskets should hang level, the gap should measure 3 in (7.6 cm), and the total length should be about 23 in (58.4 cm). The legs spread at an angle, so the 8 in (20.3 cm) legs drop about 7.5 in (19.1 cm) vertically.
Border
Each basket’s border is the tan top rim plus a tan beaded piping around the base edge. Work the border on both baskets before joining.
Border gauge: 4 sc = 1 in (2.5 cm), the same as the base. Each round has 72 sts, so the circumference is 72 × 0.25 in = 18 in (45.7 cm). The base circumference is 5.75 in × 3.14 ≈ 18 in, so the rim matches the base and the wall rises straight without flaring or pulling in.
Rnd 23: Join Color B in any st of Rnd 22. Ch 1, sc in each st around. Join. (72 sts)
Rnd 24: Ch 1, sc in each st around. Join. (72 sts)
Rnd 25: Ch 1, reverse sc in each st around. Join. (72 sts) Fasten off.
The top rim is now 0.7 in (1.8 cm) deep, and the basket is 4.75 in (12.1 cm) tall.
Bottom piping: Turn the basket upside down. Join Color B in any unused FL of Rnd 12. Ch 1, reverse sc in each FL around. Join. (72 sts) Fasten off. This makes the beaded tan ridge along the bottom edge. Together with Rnds 13–14, it forms the 0.5 in (1.3 cm) bottom band.
All border rounds use 1 stitch per existing stitch. No stitches are added, so the count stays at 72 and the shape does not change.
Final Blocking
- Weave in all ends along the solid dc bands or inside the tan rims.
- Mist each basket until it is damp but not soaked.
- Stuff each basket firmly with a towel or slide it over a 5.75 in (14.6 cm) container, then shape it into a straight cylinder.
- Press the base flat and square the bottom edge.
- Open each lattice slot with your fingers so all the slots angle the same way.
- Pin the strap flat on a mat at 47 in (119.4 cm) and mist it.
- Let everything dry completely before joining.
Final Quality-Control Checklist
- Both bases are 5.75 in (14.6 cm) across and lie flat.
- Every round of each basket counts 72 sts.
- Each lattice round has 9 groups of 5 dc.
- The diagonal bands lean the same way on both baskets.
- Both baskets are 4.75 in (12.1 cm) tall.
- The strap is 188 sts and 47 in (119.4 cm) long.
- The legs are attached exactly opposite each other on both baskets.
- The holder hangs level, with a 3 in (7.6 cm) gap between baskets.
- All ends are woven in securely.
Troubleshooting
The base ruffles: Your increases are too loose. Go down a hook size or redo the last rounds.
The base cups: Your stitches are too tight. Go up a hook size, or check that each round has its full count.
The lattice does not slant: You probably worked around the ch-3 space. Work into the chain stitches, and start each round with 2 sl sts.
The count drifts off 72: Count the groups. Each must have 5 dc and 3 ch.
The wall flares: Your dc tension is loose. Tighten your tension or use a 4.5 mm hook for the lattice only.
The basket tilts when hung: The legs are not opposite each other. Re-measure 36 sts apart and re-sew.
The strap stretches: Cotton relaxes over time. Shorten the free legs by 1 in (2.5 cm) each.
Care
Hand wash in cool water with mild soap, gently press out the water, and dry flat over a container to keep the round shape. Do not tumble dry.

Final Notes
The measurements build on each other:
- A 72-st base gives 5.75 in (14.6 cm) across and 18 in (45.7 cm) around.
- The wall stays at 72 sts and rises to 4 in (10.2 cm) after the lattice.
- The border keeps 72 sts and brings each basket to 4.75 in (12.1 cm) tall.
- The 188-st strap gives two legs of 94 sts each.
- Together, these make a holder about 23 in (58.4 cm) long.
Check your gauge on the first basket, and the rest will follow. Happy crocheting!