Marigold Lace Hanging Toilet Paper Holder Crochet Pattern

This three-tier hanging holder keeps spare toilet paper rolls within reach and adds some decoration to the bathroom. Each basket has a sturdy solid base, an airy band of lacy flowers and a scalloped rim.

The colors are teal with mustard-yellow accents. Teal is used for the bases, petals, straps and seams. Mustard yellow is used for the small round flower centers and the scalloped top edge. Natural wooden rings connect the baskets to the straps.

The pattern uses US crochet terms. Each basket measures about 5.5 in (14.0 cm) across and 4.25 in (10.8 cm) tall. The full holder hangs about 26 in (66.0 cm) from the bar to the bottom of the lowest basket.

The holder is built from separate pieces. For each basket, you crochet a round base and six flower motifs. You join the motifs into a ring and crochet that ring to the base. A three-round rim finishes the top. Two straps and six rings connect all three baskets.

Finished Size and Construction

  • Basket size: 5.5 in (14.0 cm) diameter x 4.25 in (10.8 cm) tall
  • Total hanging length: about 26 in (66.0 cm)
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4), 100% cotton
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 23 crocheted pieces (3 bases, 18 flower motifs, 2 straps) plus 6 wooden rings
  • Layout: 6 motifs per basket, joined in a ring of 1 x 6; 3 baskets stacked vertically
  • Motif size: 3 in (7.6 cm) square; each 12-stitch side spans 2.8 in (7.1 cm)
  • Basket height before rim: 3.4 in (8.6 cm)
  • Rim depth: about 0.85 in (2.2 cm)

Materials

Choose a smooth worsted-weight cotton. Cotton holds its shape, handles bathroom humidity, and shows the lace clearly.

  • Teal: 200 g / 308 m (about 1.54 m per gram)
  • Mustard yellow: 50 g / 77 m

These quantities include a margin of roughly 15-20% for gauge swatches and tails.

Tools:

  • 4.0 mm (US G-6) crochet hook
  • 6 wooden rings, 1.5 in (3.8 cm) outer diameter
  • Stitch markers
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Spray bottle and rust-proof pins for blocking
  • A wall-mounted bar or hook to hang the finished holder

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • dc – double crochet
  • sl st – slip stitch
  • st(s) – stitch(es)
  • sp – space
  • BLO – back loop only
  • sk – skip
  • rep – repeat
  • RS / WS – right side / wrong side

Special stitch – Scallop: (5 dc) all in the same stitch.

Standing sc: with a slip knot on the hook, insert the hook in the stitch and complete a sc as usual.

Gauge and Checkpoints

Gauge: 17 sc and 19 rows = 4 in (10.2 cm) in sc with a 4.0 mm hook.

Before anything else, make one complete motif and the first 12 rounds of one base. These two test pieces show whether the band and the base will fit together.

Checkpoints:

  • Base after Rnd 6 (36 sts): about 2.75 in (7.0 cm) across.
  • Base after Rnd 12 (72 sts): about 5.25 in (13.3 cm) across, lying flat.
  • Motif after Rnd 1: about 0.75 in (1.9 cm) across.
  • Motif after Rnd 4: 3 in (7.6 cm) square, with 12 sc per side spanning 2.8 in (7.1 cm).
  • Six joined motifs: a ring about 17 in (43.2 cm) around, or 5.4 in (13.7 cm) across.

If your pieces are too big, go down a hook size, to 3.75 mm. If they are too small, go up to 4.5 mm. The base and band must both have 72 sts at the joining edge, so change your hook size rather than the stitch counts.

Close-up of teal crochet with interlocking geometric squares and a golden yellow flower motif at center.

Base (Make 3)

Use teal. Work in continuous spiral rounds without joining. Place a marker in the first st of each round and move it up as you go.

Rnd 1: Make a magic ring, 6 sc in ring. (6 sts)

Rnd 2: 2 sc in each st around. (12 sts)

Rnd 3: Sc in next st, 2 sc in next st; rep from * around. (18 sts)

Rnd 4: Sc in next 2 sts, 2 sc in next st; rep around. (24 sts)

Rnd 5: Sc in next 3 sts, 2 sc in next st; rep around. (30 sts)

Rnd 6: Sc in next 4 sts, 2 sc in next st; rep around. (36 sts)

Checkpoint: 2.75 in (7.0 cm).

Rnd 7: Sc in next 5 sts, 2 sc in next st; rep around. (42 sts)

Rnd 8: Sc in next 6 sts, 2 sc in next st; rep around. (48 sts)

Rnd 9: Sc in next 7 sts, 2 sc in next st; rep around. (54 sts)

Rnd 10: Sc in next 8 sts, 2 sc in next st; rep around. (60 sts)

Rnd 11: Sc in next 9 sts, 2 sc in next st; rep around. (66 sts)

Rnd 12: Sc in next 10 sts, 2 sc in next st; rep around. (72 sts)

Checkpoint: 5.25 in (13.3 cm), lying flat with no ruffling.

Rnd 13 (turning round): Sc in BLO of each st around. (72 sts) The unused front loops form a ridge, and the edge starts to turn upward.

Rnd 14: Sc in each st around. (72 sts) Sl st in next st to smooth the step at the end of the spiral. Fasten off, leaving a short tail.

The base is now a shallow dish 5.5 in (14.0 cm) across with a wall 0.4 in (1.0 cm) high.

Flower Motif (Make 18)

Rnd 1 (yellow): Make a magic ring, ch 1, 8 sc in ring, sl st to first sc. (8 sts) Fasten off.

Rnd 2 (teal): Standing sc in any sc, ch 5, sc in next sc, ch 5; rep from * 6 more times, sl st to first sc. (8 sc, 8 ch-5 petal loops)

Rnd 3: Sl st in next 3 ch to reach the center of the first loop. Ch 1, sc in same loop, ch 5, sc in next loop, ch 7, sc in next loop, ch 5, sc in next loop, ch 7; rep from * 2 more times, sl st to first sc. (8 sc, 4 ch-5 side sps, 4 ch-7 corner sps)

Rnd 4: Ch 1, sc in next sc, 4 sc in ch-5 sp, sc in next sc, (3 sc, ch 2, 3 sc) in ch-7 sp; rep from * 3 more times, sl st to first sc. Fasten off.

Count: 48 sc plus 4 corner ch-2 sps. Each side has 12 sc between the corner sps: 3 + 1 + 4 + 1 + 3 = 12. The corner ch-2 sps are not counted as side stitches.

The open loops of Rnds 2 and 3 form the lacy petals. The sc of Rnd 4 give each motif a firm square edge for joining.

Make All Pieces

For the full holder, make:

  • 3 bases: teal only
  • 18 flower motifs: yellow Rnd 1, teal Rnds 2-4 (6 per basket)
  • 2 straps: teal only (see Assembly)

Weave in all motif tails before joining. Cotton tails show through lace, so run them through the solid sc of Rnd 4.

Layout per basket (one ring of 6 motifs):

[1][2][3][4][5][6]
 ^               |
 +---- join -----+

Motif 6 joins back to Motif 1 to close the ring. Repeat for all three baskets.

Joining

Motifs into a ring. Place Motif 1 and Motif 2 RS together with matching sides lined up. With teal, sl st through both corner ch-2 sps. Next, sl st through the back loops of each matching pair of sc, 12 pairs in total. Finish with a sl st through both opposite corner ch-2 sps. Each seam has 14 sl st.

Join Motifs 3, 4, 5 and 6 the same way. Finally, join the free side of Motif 6 to the free side of Motif 1. You now have a tube with 6 seams.

The seams add no stitches to the top or bottom edge. Each motif still has exactly 12 sc along its lower side and 12 sc along its upper side.

Tension: Keep the sl sts as loose as the sc they join. Tight seams pucker the band and shrink its circumference. If needed, use a hook one size larger for seaming only.

Bottom edge round. Turn the tube RS out. Join teal with a standing sc in the first sc after any seam on the lower edge. Sc in each of the remaining 11 sc on that motif’s lower side. Skip the joined corner sps at each seam, and work 12 sc along each of the other motifs. Sl st to first sc. Count: 6 motifs x 12 sc = 72 sts.

Band to base. Hold the band and the base with their WS facing each other, so the band’s edge sits on base Rnd 14. With teal, sc through each band st and its matching base st together. (72 sts) Fasten off.

Size checkpoint: the basket should now stand 3.4 in (8.6 cm) tall and measure 5.5 in (14.0 cm) across.

Border (Top Rim)

Border gauge: the same as the base, 17 sc = 4 in (10.2 cm). Each motif’s 12 sc span 2.8 in (7.1 cm).

Rnd 1 (teal): Join with a standing sc in the first sc after any seam on the top edge. Sc in the next 11 sc. Skip the corner sps at each seam and work 12 sc across each motif. Sl st to first sc. (72 sts: 6 x 12)

Rnd 2 (yellow): Join yellow with a standing sc in any st. Sc in each st around, sl st to first sc. (72 sts)

Rnd 3 (yellow scallops): Ch 1, sc in same st, sk 2 sts, Scallop in next st, sk 2 sts, sc in next st; rep from * 10 more times, sk 2 sts, Scallop in next st, sk 2 sts, sl st to first sc. Fasten off.

Count: 12 scallops. Total sts: 12 sc + 60 dc = 72.

Why the math works: each scallop repeat uses 6 sts: 2 skipped, 1 for the scallop, 2 skipped and 1 for the sc. Since 72 ÷ 6 = 12, the scallops fit evenly with no partial repeat, which gives exactly 2 scallops per motif. Each scallop spans 1.4 in (3.6 cm). The rim adds about 0.85 in (2.2 cm) of height.

Assembly: Rings and Straps

Rings. On each basket, mark two points directly opposite each other on rim Rnd 1. Put them at the seam between Motifs 1 and 2 and at the seam between Motifs 4 and 5. These points are 36 sts apart, which is half the circumference. With teal, sew one wooden ring to the outside of the basket at each mark, using 6-8 firm wraps through Rnd 1.

Straps (Make 2). With teal, ch 105.

Row 1: Sc in 2nd ch from hook and each ch across. Turn. (104 sts)

Rows 2-3: Ch 1, sc in each st across. Turn. (104 sts)

Fasten off. Each strap measures about 24.5 in (62.2 cm) long and 0.6 in (1.5 cm) wide.

Top loop: fold 2 in (5.1 cm) of one end to the WS and whipstitch it in place. This makes a loop about 4 in (10.2 cm) around, which fits over a standard bathroom bar.

Bottom loop: thread the other end through one ring on the bottom basket. Fold 1 in (2.5 cm) to the WS and whipstitch in place.

Middle and top baskets: pass the strap through the matching ring on each basket. Sew the middle basket’s ring to the strap 5.5 in (14.0 cm) above the bottom fold. Sew the top basket’s ring 11 in (27.9 cm) above the bottom fold. Repeat with the second strap so the baskets hang level.

Final Blocking

  1. Lightly spray each basket with water until it is damp but not soaked.
  2. Slide a toilet paper roll wrapped in a plastic bag into each basket to hold its shape.
  3. Ease the lace band so the petal loops open evenly.
  4. Pin each scallop into a smooth half-circle along the rim.
  5. Lay the straps flat and pin them straight at 24.5 in (62.2 cm), measured before folding.
  6. Let everything dry completely, then remove the pins and rolls.

Final Quality-Control Checklist

  • Each base has 72 sts and measures 5.5 in (14.0 cm) across.
  • Every motif has 12 sc per side and 4 corner ch-2 sps.
  • Each basket has 6 seams, and none of them pucker.
  • The bottom edge, the band-to-base round and rim Rnd 1 each have 72 sts.
  • Each basket has 12 even scallops.
  • Each basket has two rings sewn directly opposite each other.
  • The ring spacing is the same on both straps, and all three baskets hang level.
  • All tails are woven in.

Troubleshooting

The base ruffles: your tension is loose or your hook is too large. Go down a hook size and redo Rnds 7-12.

The base cups up before Rnd 13: your tension is too tight. Go up a hook size.

The band is bigger than the base: the seams are too loose or the motifs are too big. Check that each motif measures 3 in (7.6 cm).

The scallops don’t fit evenly: recount Rnd 2. It must have exactly 72 sts.

A basket tilts when hanging: move one ring until the two rings are exactly 36 sts apart.

A strap stretches: cotton relaxes over time. Make the top loop fold 0.5 in (1.3 cm) deeper.

Care

Hand wash in cool water with mild soap, press out the extra water, and reshape each basket as it dries flat. Do not tumble dry, because the scallops can lose their shape.

Teal and golden crocheted three-tier toilet paper holder suspended from wooden rod in bright bathroom.

Final Notes

Every measurement in this pattern comes back to 72 stitches. Each base ends with 72 sts and is about 5.5 in (14.0 cm) across. Each motif has 12 sc per side spanning 2.8 in (7.1 cm), so six motifs give 72 sts along both the top and bottom edges. The rim keeps those 72 sts, which divide evenly into 12 scallops. Once one motif and one base measure correctly, the rest of the holder will fit together.

Happy crocheting!

Leave a Comment