This honeycomb mesh bag holder is a tall, slim tube that hangs from a wall hook and keeps your plastic grocery bags tidy and within reach. You stuff bags in through the top and pull them out one at a time through the gathered bottom. It holds about 25 to 30 loosely packed bags.
The holder has a firm single crochet band at each end, an open honeycomb-style chain mesh through the body, a sturdy strap arching over the top opening, and a drawstring cord with knotted ends that gathers the bottom closed. The photos show the same design made twice, once in soft sage green and once in pale butter yellow. Each holder is a single tube with a separate drawstring. The open mesh lets you see how many bags are left, and the two colors look good hung side by side.
The pattern uses US crochet terms. The finished holder is 6 in (15.2 cm) wide when laid flat, 12 in (30.5 cm) around, and 18 in (45.7 cm) tall from the bottom band to the top band. The strap adds about 3.5 in (8.9 cm), for a total hanging height of about 21.5 in (54.6 cm).
Construction is simple. You start with a chain ring, work a solid bottom band in joined rounds, switch to a chain-5 mesh for the body, convert back to single crochet for the top band, and finish with a three-row strap. A slip-stitch cord threads through the bottom band to make the drawstring.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide flat x 18 in (45.7 cm) tall, plus strap
- Circumference: 12 in (30.5 cm)
- Skill level: Easy
- Terminology: US crochet terms
- Yarn weight: Worsted (#4), cotton
- Hook: US H-8 (5 mm)
- Number of pieces: 1 tube plus 1 drawstring cord per holder
- Layout: Worked in joined rounds from the bottom up, with no seams
- Piece size: 42 stitches around, or 21 stitches per flattened side
- Size before top band: 6 in (15.2 cm) wide x 16.5 in (41.9 cm) tall
- Top band (border) depth: 1.5 in (3.8 cm), plus a 0.75 in (1.9 cm) wide strap
Materials
Choose a smooth worsted-weight cotton or cotton blend. Cotton holds its shape, doesn’t stretch much under the weight of the bags, and holds up well to washing. Acrylic also works, but the mesh will sag more over time. Light, soft colors like sage and butter yellow show the honeycomb texture best. Very dark yarn hides the cells.
Yarn for one holder:
- Sage green: 80 g (about 135 m)
Yarn for a second holder (optional):
- Butter yellow: 80 g (about 135 m)
These amounts include about a 15% margin for your gauge test and for differences between brands.
Tools:
- US H-8 (5 mm) crochet hook
- Stitch marker
- Yarn needle
- Scissors
- Measuring tape
- Rust-proof pins, plus a rolled towel or a cardboard tube about 4 in (10.2 cm) across for blocking
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- sl st – slip stitch
- sk – skip
- st(s) – stitch(es)
- rnd(s) – round(s)
- ch-5 loop – the open space made by a chain of 5
Special stitch, mesh loop: Ch 5, sc in the next ch-5 loop. Each new sc goes into the center of a loop from the round below, which shifts each round by half a cell. That shift creates the honeycomb look.
Gauge and Checkpoints
Solid gauge: 14 sc and 16 rnds = 4 in (10.2 cm) in sc, worked in joined rounds.
Mesh gauge: 4 mesh rnds = 3 in (7.6 cm) tall, unstretched. Each mesh rnd is about 0.75 in (1.9 cm) tall.
Make the bottom band first and use it as your gauge test. That’s quicker than a separate swatch, and it uses the same stitch and round structure as the rest of the holder.
Checkpoints:
- After Rnd 6, the band measures 12 in (30.5 cm) around, 6 in (15.2 cm) flat, and 1.5 in (3.8 cm) tall.
- After Rnd 14, the piece is about 7.5 in (19.1 cm) tall: 1.5 in (3.8 cm) of band plus 6 in (15.2 cm) of mesh.
- After Rnd 26, the piece is about 16.5 in (41.9 cm) tall.
- After Rnd 32, the piece is 18 in (45.7 cm) tall and still 6 in (15.2 cm) wide flat.
If the band is too big (more than 6.5 in / 16.5 cm flat), switch to a US G-6 (4 mm) hook and start again. If it’s too small (less than 5.5 in / 14.0 cm flat), switch to a US I-9 (5.5 mm) hook. Don’t change the stitch count. The mesh repeat is 3 stitches, so the count must stay at 42.

Bottom Band
Leave a 6 in (15.2 cm) tail.
Rnd 1: Ch 42. Make sure the chain isn’t twisted, then sl st in the first ch to form a ring. Ch 1 (does not count as a st), sc in each ch around, sl st in the first sc to join. (42 sc)
Rnds 2–6: Ch 1, sc in each st around, sl st in the first sc to join. (42 sc per rnd)
Move a stitch marker up to the first st of each round so your joins stay lined up. The joins make a faint seam line, which marks the back of the holder.
The band is now 1.5 in (3.8 cm) tall. Check it against checkpoint 1.
Honeycomb Mesh Body
Rnd 7 (set-up): Ch 1, sc in the first st, ch 5, sk 2 sts, sc in the next st. Repeat from * around, ending with ch 5, sk the last 2 sts, sl st in the first sc to join. (14 sc, 14 ch-5 loops)
The math: 42 sts ÷ 3 sts per repeat = 14 repeats, so the loops are spaced evenly with nothing left over.
Rnd 8: Sl st in each of the first 3 ch of the next loop to reach its center. Ch 1, sc in the same loop, ch 5, sc in the next ch-5 loop. Repeat from * around, ending with ch 5, sl st in the first sc to join. (14 sc, 14 ch-5 loops)
Rnds 9–26: Repeat Rnd 8. (14 sc, 14 ch-5 loops per rnd)
That’s 20 mesh rounds in total (Rnds 7–26), or about 15 in (38.1 cm) of mesh. Every sc sits in the center of a loop from the round below, so the openings line up in staggered six-sided cells.
Keep your chains relaxed but even. One tight loop will pull the honeycomb out of line.
Check checkpoint 3 with the mesh hanging naturally, not stretched.
Top Band and Hanging Strap (Border)
Border gauge: same as the bottom band, 14 sc and 16 rnds = 4 in (10.2 cm). Flatten the tube with the join line on one folded edge. This gives 2 sides, front and back, with 21 sts each.
Rnd 27 (conversion): Ch 1, sc in the first sc, 2 sc in the next ch-5 loop, sc in the next sc, 2 sc in the next ch-5 loop. Repeat from * around, sl st in the first sc to join.
Count: 14 sc worked 1 per existing sc + 28 sc added (2 in each of 14 loops) = 42 sc. Per flattened side: 7 + 14 = 21 sc.
Rnds 28–32: Ch 1, sc in each st around, sl st in the first sc to join. (42 sc per rnd, 21 per side)
The top band is now 6 rnds, or 1.5 in (3.8 cm), deep, the same as the bottom band.
Why the math works: The bottom band, mesh, and top band all use the same 42-stitch base. The mesh is 14 repeats of 3 stitches. Converting each repeat back into 3 sc (1 in the sc plus 2 in the loop) brings the count back to 42. So the top band is exactly as wide as the bottom band, and the tube stays straight.
Hanging strap: Don’t fasten off. Count the stitches of Rnd 32 as 1 to 42, starting at the join.
Row 1: Ch 30, sk sts 2–21, sl st in st 22 (directly opposite the join), sl st in st 23. (30 ch)
Row 2: Turn, sc in each of the 30 ch, sl st in st 42, sl st in st 41. (30 sc)
Row 3: Turn, sc in each of the 30 sc, sl st in st 21, sl st in st 20. (30 sc)
Fasten off and weave in the end. The strap is 3 rows, or 0.75 in (1.9 cm), wide and about 8.6 in (21.8 cm) long. It rises about 3.5 in (8.9 cm) above the opening. Each end is attached across 3 band stitches so it won’t pull out.
Drawstring
Leave a 4 in (10.2 cm) tail. Ch 92. Starting in the second ch from the hook, sl st in the back bump of each ch to the end. (91 sl st) Fasten off, leaving a 4 in (10.2 cm) tail.
The cord is about 24 in (61.0 cm) long. Tie a firm overhand knot about 1 in (2.5 cm) from each end, then trim the tails to 0.5 in (1.3 cm). For the chunkier knotted ends in the photos, tie a second knot over the first.
Threading: Start at the center front of the bottom band. Weave the cord in and out between the posts of Rnd 2, going over 3 sts and under 3 sts all the way around. That’s 7 over-and-under pairs, which brings both ends out side by side at the front.
Final Blocking
- Weave in the starting tail at the bottom band.
- Soak the holder in cool water for 10 minutes, then gently squeeze out the water. Don’t wring it.
- Roll it in a towel to remove the extra water.
- Slide the holder over a rolled towel or a cardboard tube about 4 in (10.2 cm) across so it keeps a round shape.
- Smooth the mesh lengthwise until it measures 15 in (38.1 cm) between the bands. Nudge each cell into an even hexagon.
- Pin the bands straight at 6 in (15.2 cm) wide flat and let the holder dry completely.
- Remove the form, thread the drawstring back in if you took it out, and gather the bottom.
Final Quality-Control Checklist
- Both bands have 42 sc and measure 6 in (15.2 cm) flat.
- The mesh has 20 rounds, with 14 loops in every round.
- No loops are twisted or doubled at the round joins.
- The holder is 18 in (45.7 cm) tall, not counting the strap.
- The strap is centered over the opening and firmly attached at both ends.
- With the drawstring pulled, the bottom opening is about 1 in (2.5 cm) across: small enough to hold the bags in, big enough to pull one out.
- All tails are woven into solid sc, not into the mesh.
Troubleshooting
The tube is twisted. The Rnd 1 chain was twisted when you joined it. You’ll need to start over.
The mesh spirals to one side. Your rounds are starting in the wrong place. Always sl st exactly 3 ch into the first loop so each round starts at the loop’s center.
The loop count changes to 13 or 15. You skipped or added a loop. Count the loops at the end of every round until the rhythm becomes automatic.
The top band is narrower than the bottom band. You worked only 1 sc in some loops on Rnd 27. Redo the round with exactly 2 sc in every loop.
The mesh is too long. Cotton relaxes as it hangs. If the mesh measures more than 16 in (40.6 cm) unstretched, take out 1 or 2 mesh rounds.
The strap stretches. Add a fourth row of 30 sc, or use a slightly smaller hook for the strap only.
Bags slip out of the bottom. Pull the drawstring tighter and tie a double bow.
Care
Machine wash cold on a gentle cycle inside a mesh laundry bag, or wash by hand. Reshape the holder while it’s damp, then lay it flat or hang it to dry.

Final Notes
All the measurements in this pattern follow from the gauge. At 14 sc to 4 in (10.2 cm), the 42-stitch band is 12 in (30.5 cm) around and 6 in (15.2 cm) flat. The 14 mesh repeats keep that width through 20 rounds, about 15 in (38.1 cm). The 42-stitch conversion round then makes a matching 1.5 in (3.8 cm) top band, for a total height of 18 in (45.7 cm). The strap and drawstring finish the holder, and you can make a second one in another color for a matching pair.
Happy crocheting!