This hanging toilet paper holder has three leaf-shaped pockets stacked down a long backing panel. It hangs from a single hook and keeps three standard rolls on display. The main fabric is sage green single crochet. Cream yarn picks out the leaf veins, the scalloped trims and the hanging strap.
Each pocket is a wide leaf with a V-shaped top edge that dips at the center and a rounded bottom. A cream center vein runs from the V point to the bottom, with three pairs of angled side veins that follow the line of the top edge. The bottom of each pocket nests into the V of the pocket below, so the column reads like a stem of leaves.
The pattern uses US crochet terms. The finished holder measures 6 in (15.2 cm) wide and 21 in (53.3 cm) long, not counting the strap. With the strap it’s about 24.5 in (62.2 cm) from the bottom edge to the top of the loop.
You will make one oval backing worked in rounds, three pockets worked in rows as wide circle segments, and one strap. The pockets are sewn onto the front of the backing. Then the backing gets a two-round cream border, and the strap is sewn on last.
Finished Size and Construction
- Finished size: 6 x 21 in (15.2 x 53.3 cm), plus the strap
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hook: 4.5 mm (US 7)
- Number of pieces: 5 (1 backing, 3 pockets, 1 strap)
- Layout: 1 column of 3 pockets on a vertical backing
- Pocket size: about 8.5 in (21.6 cm) wide and 6.5 in (16.5 cm) tall, flat
- Backing before border: 5 x 20 in (12.7 x 50.8 cm)
- Border depth: 0.5 in (1.3 cm)
Materials
Use a smooth worsted cotton or cotton blend, about 200 yd (183 m) per 100 g. Cotton holds its shape well and doesn’t pill much in a bathroom. Choose a firm yarn, because the pockets have to carry the weight of the rolls.
- Sage green (MC): 230 g, about 421 m
- Cream (CC): 60 g, about 110 m
These quantities include a margin of about 15%.
Tools
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- 8 locking stitch markers
- Sewing pins
- Measuring tape
- Scissors
- Blocking mat and rustproof pins
- Spray bottle
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sl st – slip stitch
- sc2tog – single crochet 2 together
- st(s) – stitch(es)
- sk – skip
- RS / WS – right side / wrong side
- MC / CC – main color / contrast color
Special stitches
- Shell: (hdc, dc, hdc) all in the same stitch.
- Surface slip stitch: With RS facing, hold the yarn behind the work. Insert the hook from front to back through the fabric and pull up a loop through the loop on your hook. Each new stitch moves one stitch or one row along your vein line.
Gauge and Checkpoints
Gauge: 16 sc and 16 rows/rounds = 4 in (10.2 cm) with a 4.5 mm hook. That means 4 sc and 4 rows per 1 in (2.5 cm).
Make one pocket first. It’s the quickest piece and it shows your gauge in both directions.
Checkpoints
- Pocket after Row 8: radius 2 in (5.1 cm) from the center of the ring to the edge
- Pocket after Row 16: radius 4 in (10.2 cm)
- Backing after Rnd 5: 2.5 x 17.5 in (6.4 x 44.5 cm)
- Backing after Rnd 10: 5 x 20 in (12.7 x 50.8 cm)
If your piece comes out too big, go down half a hook size. If it’s too small, go up half a size. Don’t add or remove rows to fix gauge, because the pocket placement depends on these measurements.

Pocket (Make 3)
Each pocket is two-thirds of a circle, worked flat in rows from a magic ring. The four increases per row make a 240-degree wedge. When the wedge lies flat, its two straight edges rise from the center in a V, and that V is the top edge of the pocket. The curved outer edge becomes the rounded bottom and sides.
Ch 1 at the start of each row does not count as a stitch.
Row 1 (RS): With MC, make a magic ring, ch 1, 4 sc in ring, turn. (4)
Row 2: Ch 1, 2 sc in each st across, turn. (8)
Row 3: Ch 1, [sc in next st, 2 sc in next st] 4 times, turn. (12)
Rows 4–16: Ch 1, [sc in next (row number minus 2) sts, 2 sc in next st] 4 times, turn. Each row has 4 times the row number in stitches.
Stitch counts: Row 4 (16), Row 5 (20), Row 6 (24), Row 7 (28), Row 8 (32), Row 9 (36), Row 10 (40), Row 11 (44), Row 12 (48), Row 13 (52), Row 14 (56), Row 15 (60), Row 16 (64).
Pull the ring closed tight. Fasten off MC.
The first and last stitches of Row 16 are the two outer corners. The center of the ring is the V point.
Pocket Edging
Rnd 1 (RS): Join CC in the last st of Row 16 (corner 1). Ch 1, 3 sc in the same st. Work 1 sc in the end of each row from Row 15 down to Row 2 (14 sc). Sc2tog over the end of Row 1 on this side and the end of Row 1 on the other side (1 st at the V point). Work 1 sc in the end of each row from Row 2 up to Row 15 (14 sc). Work 3 sc in the first st of Row 16 (corner 2). Sc in the next 62 sts of Row 16. Join with a sl st to the first sc. (97 sts: 3 + 14 + 1 + 14 + 3 + 62)
Row 2 (top scallops): Sl st in the next st (the center st of corner 1). You’ll now work only along the V-shaped top edge, which has 33 sts from the center of corner 1 to the center of corner 2. Ch 1, sc in the same st, sk 1, shell in next st, sk 1, sc in next st. Repeat from * to * 7 more times. The last sc lands in the center st of corner 2. (8 shells: 4 on each side of the V, with an sc at the V point.) Fasten off.
The top edge has 4 x 8 + 1 = 33 sts, which is why an sc falls right at the V point.
Leaf Veins
Use CC and surface slip stitch on the RS.
Center vein: Start at the V point. Work down the center line of the pocket, between the two middle sts of each row (sts 2 and 3 in Row 1, and between sts 32 and 33 in Row 16). Make 1 surface sl st per row, for 16 sl sts. Fasten off at the bottom edge.
Side veins: Make 3 on each side. They start on the center vein at Row 4, Row 8 and Row 12, which is 1, 2 and 3 in (2.5, 5.1 and 7.6 cm) below the V point.
Work each vein diagonally up and outward, parallel to the nearest top edge, so the veins form chevrons. Make each vein about 12 surface sl sts, or 3 in (7.6 cm), and stop about 1 in (2.5 cm) short of the edge. Fasten off each vein and weave in the ends on the WS.
Pocket checkpoint: The pocket should measure about 8.5 in (21.6 cm) at the widest point and 6.5 in (16.5 cm) from the corners to the bottom. The two corners sit about 7.5 in (19.1 cm) apart.
Backing (Make 1)
The backing is a long oval worked in joined rounds around a foundation chain. Each round adds 3 sts at each end. Join each round with a sl st to the first sc. Ch 1 does not count as a stitch. Work the first stitch of every round into the same stitch as the join.
Rnd 1: With MC, ch 63. Sc in 2nd ch from hook and in the next 60 ch, then 3 sc in the last ch. Working along the free loops on the other side of the chain, sc in the next 60 ch, then 2 sc in the last ch (the same ch as the first sc). Join. (126: 60 per long side, 3 per end)
In the rounds below, “Inc group” means: sc in the next (round number minus 2) sts, then 2 sc in the next st.
Rnd 2: Ch 1, 2 sc in the same st, sc in the next 60 sts, [2 sc in next st] 3 times, sc in the next 60 sts, [2 sc in next st] 2 times. Join. (132)
Rnds 3–10: Ch 1, Inc group once, sc in the next 60 sts, Inc group 3 times, sc in the next 60 sts, Inc group 2 times. Join. Each end has 3 times the round number in stitches, and each long side stays at 60.
Stitch counts: Rnd 3 (138), Rnd 4 (144), Rnd 5 (150), Rnd 6 (156), Rnd 7 (162), Rnd 8 (168), Rnd 9 (174), Rnd 10 (180: 60 per long side, 30 per end).
Fasten off. Choose one end as the top and mark it.
Strap (Make 1)
Row 1: With CC, ch 41. Sc in 2nd ch from hook and in each ch across, turn. (40)
Row 2: Ch 1, sc in each st across. (40) Fasten off and leave a 12 in (30.5 cm) tail.
The strap measures 10 x 0.5 in (25.4 x 1.3 cm).
Make All Pieces
- Sage green: 1 backing, 3 pockets
- Cream: edging and veins on all 3 pockets, 1 strap, and the backing border (worked after joining)
Layout (top to bottom):
^ strap ^
[ BACKING TOP ]
[ POCKET 1 ] corners 1.5 in (3.8 cm) below top
[ POCKET 2 ] corners 7.5 in (19.1 cm) below top
[ POCKET 3 ] corners 13.5 in (34.3 cm) below top
[ BACKING END ]
Joining
Lay the backing RS up. Measure from the top edge of Rnd 10.
- Pin both corners of Pocket 1 to Rnd 9 at the side edges, 1.5 in (3.8 cm) below the top. Rnd 10 stays free for the border.
- Pin the bottom center of the pocket’s curved edge on the center line, 5.5 in (14.0 cm) below the corner line.
- Pin the curved edge in a U shape. Run it down each side along Rnd 9 for about 3 in (7.6 cm), then curve it across to the bottom pin.
- Repeat for Pocket 2 (corners at 7.5 in / 19.1 cm) and Pocket 3 (corners at 13.5 in / 34.3 cm). Each pocket’s bottom should nest just above the V of the pocket below.
Stitch-to-stitch logic: On each pocket, the curved side of edging Rnd 1 has 66 sts: the 62 sts along the curve plus the outer and center st of each corner. The U-shaped path on the backing covers about 54 to 56 backing sts. The pocket is about 7 in (17.8 cm) wide at the corners but the backing is only 5 in (12.7 cm) wide, and that extra width is what makes room for the roll.
With CC and a tapestry needle, whipstitch through the back loop of each pocket edging st and one strand of the backing st below it. Sew 1 extra pocket st about every 5 backing sts to take up the ease.
Tension: Pull each stitch snug, but don’t pucker the backing. Check that the backing still lies flat after each pocket.
Checkpoint: The backing should still measure 5 x 20 in (12.7 x 50.8 cm). If it has shrunk, your seams are too tight.
Border
The border is worked around the backing only. The pockets are sewn onto the surface at Rnd 9, so they don’t add any stitches to the edge. The border starts on the 180 sts of Rnd 10.
Border gauge: 4 sc per 1 in (2.5 cm). One scallop uses 4 sts and covers 1 in (2.5 cm).
Rnd 11 (conversion round): Join CC in the first st of Rnd 10. Ch 1, [sc in next 4 sts, 2 sc in next st] 2 times, sc in the next 60 sts, [sc in next 4 sts, 2 sc in next st] 6 times, sc in the next 60 sts, [sc in next 4 sts, 2 sc in next st] 4 times. Join. The count is 180 sts worked once each, plus 12 added, for 192. That’s 60 per long side and 36 per end.
Rnd 12 (scallops): Ch 1, sc in the same st, sk 1, shell in next st, sk 1, sc in next st. Repeat from * to * around. On the last repeat, leave out the final sc and join to the first sc instead. (48 scallops: 15 per long side, 9 per end) Fasten off.
Why the math works: Rnd 10 has 60 sts on each side and 30 on each end. Adding 6 per end brings the ends to 36, so every segment is a multiple of 4: 60 / 4 = 15 and 36 / 4 = 9. The first end is split 12 + 24, which also divides by 4, so no scallop is cut off at the start of the round. The extra stitches also give the curved ends enough slack to lie flat.
Strap: Sew the strap ends to the WS of the top end, 1 in (2.5 cm) below the edge and 4 in (10.2 cm) apart. The loop peaks about 3.5 in (8.9 cm) above the top.
Final Blocking
- Weave in all ends on the WS.
- Lay the holder flat on the blocking mat, RS up.
- Pin the backing to 6 x 21 in (15.2 x 53.3 cm).
- Pin each scallop tip so it sits out evenly.
- Mist the whole piece until it’s damp. Don’t soak it.
- Smooth the veins with your fingers so they lie straight.
- Put a dry roll in each pocket to shape it as it dries.
- Leave it to dry completely, then unpin.
Final Quality-Control Checklist
- Backing measures 6 x 21 in (15.2 x 53.3 cm)
- Rnd 10 has 180 sts, Rnd 11 has 192, and Rnd 12 has 48 scallops
- Each pocket has 64 sts in Row 16 and 97 in edging Rnd 1
- 8 top scallops per pocket, with an sc at the V point
- 1 center vein and 3 mirrored side veins on each side of every pocket
- Pocket corners at 1.5, 7.5 and 13.5 in (3.8, 19.1 and 34.3 cm)
- Strap is centered and firmly sewn
- No loose ends on the RS
Troubleshooting
- Pocket ruffles: You have too many sts. Recount Row 16 (64).
- Pocket cups instead of lying flat: You missed an increase. Check that each row adds 4.
- Backing ends curl: Your increases are too tight. Go up a hook size for the end sections only.
- V point gapes: Pull the magic ring tighter and redo the sc2tog.
- Veins pucker: Your surface slip stitches are too tight. Work them more loosely or use a larger hook.
- Rolls sit too low: The pocket bottom is pinned too low. Raise it 0.5 in (1.3 cm).
- Holder tilts: The strap ends aren’t the same distance from center.
Care
Hand wash in cool water and lay flat to dry. Reshape the pockets with rolls while they dry.

Final Notes
Everything builds on one gauge: 4 sc per 1 in (2.5 cm). Sixteen rows give a pocket with a 4 in (10.2 cm) radius. Ten rounds give a 5 x 20 in (12.7 x 50.8 cm) backing. The pockets are spaced so their corners sit 6 in (15.2 cm) apart, and the 0.5 in (1.3 cm) border brings the backing to 6 x 21 in (15.2 x 53.3 cm). Check each stage as you go, and the finished holder will hang straight and hold all three rolls.
Happy crocheting!