These airy tab-top curtain panels are worked in a classic diamond fishnet mesh with small bobbles sprinkled across it. They let daylight through while still giving a room soft color and texture. The bobbles sit where the diamonds meet and line up in staggered columns, so each panel looks like a garden trellis dotted with buds.
The sample pair uses one raspberry pink panel and one mint green panel, hung side by side for a cheerful cottage look. You can make both panels in one color, or in any two colors you like. The pattern uses US crochet terms throughout.
Each finished panel measures 34.75 in x 77.25 in (88.3 cm x 196.2 cm) including the border. The tabs add 3 in (7.6 cm) above the top edge, so each panel hangs about 80.25 in (203.8 cm) from the top of the rod.
Construction is simple. Each panel is worked flat in rows of fishnet mesh, starting from a foundation chain, with bobble rows placed every fourth row. A three-round single-crochet border squares the edges. Six tabs are then worked straight up from the top border, folded to the back, and sewn down. The two panels are never joined.
Finished Size and Construction
- Finished panel size: 34.75 in x 77.25 in (88.3 cm x 196.2 cm)
- Hanging drop including tabs: 80.25 in (203.8 cm)
- Skill level: Easy–Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 2 separate panels, 1 pink and 1 green, each worked as a single piece with its tabs attached
- Layout: Panels hang side by side on one rod and are not joined
- Mesh body size (before border): 33.25 in x 75.75 in (84.5 cm x 192.4 cm)
- Border depth: 0.75 in (1.9 cm) on every side
Materials
Yarn: Use a smooth worsted-weight cotton or cotton blend at about 200 yd (183 m) per 100 g. Cotton holds the mesh open and drapes well. Avoid fuzzy yarns, because they blur the diamonds and hide the bobbles.
- Color A, Raspberry Pink: 450 g (about 823 m / 900 yd) for one panel
- Color B, Mint Green: 450 g (about 823 m / 900 yd) for one panel
One panel uses about 375 g (686 m). The quantities above include a margin of roughly 20% for the gauge swatch, small tension differences, and joins.
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- 6–8 locking stitch markers
- Rust-proof blocking pins
- Tape measure
- Large blocking surface (foam mats, a bed, or a carpet covered with a clean sheet)
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- dc – double crochet
- sl st – slip stitch
- sk – skip
- sp – space
- st(s) – stitch(es)
- yo – yarn over
- RS / WS – right side / wrong side
- arch – a ch-5 loop of the mesh
Special stitch: Bobble (bob). (Yo, insert hook into the indicated arch, yo, pull up a loop, yo, pull through 2 loops) 5 times, then yo and pull through all 6 loops on hook. A bob takes the place of an sc point in the mesh. Do not chain 1 after it; start the next ch 5 straight away.
Gauge and Checkpoints
Mesh gauge: 4 foundation ch = 1 in (2.5 cm). One mesh unit (1 sc point + 1 arch) = 6 ch = 1.5 in (3.8 cm) wide. 8 mesh rows = 6 in (15.2 cm), so 1 row = 0.75 in (1.9 cm).
Border gauge: 16 sc = 4 in (10.2 cm), and 1 border round = 0.25 in (0.6 cm) deep.
Test swatch first: Ch 26 and work Row 1 as written below. You will have 5 sc and 4 arches. Work Rows 2–9 using the Row E and Row O instructions, and in Row 5 work 1 bob in the center inner arch. Lay the swatch flat, stretch it gently into its diamond shape, and measure. It should be 6.25 in (15.9 cm) wide, and Rows 2–9 should measure 6 in (15.2 cm) tall.
If your swatch is too big, go down a hook size. If it is too small, go up a hook size. Mesh grows a lot with tension, so check again after the first 11 rows of the real panel.
Measurement checkpoints for each panel (lay the piece flat and pat it into shape before measuring):
- After Row 1: 33.25 in (84.5 cm) wide
- After Row 11: 8.25 in (21.0 cm) tall
- After Row 51: 38.25 in (97.2 cm) tall
- After Row 101: 75.75 in (192.4 cm) tall
- After the border: 34.75 in x 77.25 in (88.3 cm x 196.2 cm)

Panel Pattern (make 1 in each color)
Foundation: Ch 134.
Row 1 (WS): Sc in 2nd ch from hook, ch 5, sk 5 ch, sc in next ch; rep from * across. Turn.
Count: 23 sc points, 22 arches.* The base spans 133 ch, which is 33.25 in (84.5 cm).
The bobbles are worked on odd (WS) rows, so they puff out toward the RS.
Row E (RS, all even rows): Ch 5 (counts as dc + ch 2), sc in first arch, (ch 5, sc in next arch) 21 times, ch 2, dc in last sc. Turn.
Count: 22 sc points, 21 full arches, plus 2 half arches (ch 2) at the edges.
Row O (WS, plain odd rows): Ch 1, sc in first dc, (ch 5, sc in next arch) 21 times, ch 5, sc in 3rd ch of the turning ch-5. Turn.
Count: 23 sc points (2 edge sc + 21 inner points), 22 arches.
In Row O, the 21 sc worked into arches are the inner points, numbered 1–21 from the start of the row.
Row A (WS, Bobble Row A): Ch 1, sc in first dc, (ch 5, sc in next arch) twice, ch 5, bob in next arch, (ch 5, sc in next arch) 3 times, ch 5, bob in next arch; rep from * 3 more times, (ch 5, sc in next arch) twice, ch 5, sc in 3rd ch of the turning ch-5. Turn.
Count: 23 points (5 bobs at inner points 3, 7, 11, 15, 19 + 18 sc), 22 arches.*
Row B (WS, Bobble Row B): Ch 1, sc in first dc, (ch 5, sc in next arch) 4 times, ch 5, bob in next arch, (ch 5, sc in next arch) 3 times; rep from * 3 more times, ch 5, sc in next arch, ch 5, sc in 3rd ch of the turning ch-5. Turn.
Count: 23 points (4 bobs at inner points 5, 9, 13, 17 + 19 sc), 22 arches.*
Both bobble sets mirror around the center point 11, so the columns sit evenly. Because Row A and Row B alternate, the columns look staggered.
Row sequence:
- Row 2: Row E
- Row 3: Row O
- Rows 4–11 (the 8-row repeat): Row E, Row A, Row E, Row O, Row E, Row B, Row E, Row O
- Rows 12–99: Repeat Rows 4–11 eleven more times, for 12 repeats in total
- Row 100: Row E
- Row 101: Row O
Total: 101 rows, with 12 Row A bands and 12 Row B bands, for 108 bobbles per panel. The body measures 33.25 in x 75.75 in (84.5 cm x 192.4 cm). Do not fasten off.
Make Both Panels
- Color A (Raspberry Pink): 1 panel, about 375 g used
- Color B (Mint Green): 1 panel, about 375 g used
Layout on the rod (seen from inside the room):
[ Rod ===================================== ]
[ Panel 1: Pink ] [ Panel 2: Green ]
The panels hang independently and are not sewn together, so no joining section is needed. Work all rows of both panels with the same hook and check both against the same checkpoints, so they finish at the same length.
Border
Border gauge: 4 sc = 1 in (2.5 cm), 1 round = 0.25 in (0.6 cm). In this border, each side count is the number of sc between the corner ch-2 spaces. The two sc that flank each corner ch-2 space belong to the two sides they lie along.
Rnd 1 (RS): Turn so the RS faces you.
- Top-right corner: Ch 1, (sc, ch 2, sc) in the last sc of Row 101.
- Top edge: 5 sc in each arch and 1 sc in each inner point, working the bobble or sc point as one stitch, then (sc, ch 2, sc) in the final sc of the row.
- Left side: 2 sc into the side of Row 101, 3 sc into the side of each of Rows 100 down to 2 (worked around the dc post on even rows and around the sc edge on odd rows), then 2 sc into the side of Row 1.
- Bottom-left corner: (sc, ch 2, sc) in the foundation ch at the base of the last sc of Row 1.
- Bottom edge: Sc in each of the next 131 foundation ch, then (sc, ch 2, sc) in the ch at the base of the first sc of Row 1.
- Right side: Work as for the left side, from Row 1 up to Row 101.
- Sl st to the first sc.
Counts:
- Top: 1 + (22 x 5) + 21 + 1 = 133
- Bottom: 1 + 131 + 1 = 133
- Each side: 1 + 2 + (99 x 3) + 2 + 1 = 303
- Total: 872 sc + 4 corner ch-2 spaces
Rnd 2: Ch 1, sc in each sc around, working (sc, ch 2, sc) in each corner ch-2 space. Sl st to the first sc.
Counts: top/bottom 135, sides 305, total 880.
Rnd 3: Repeat Rnd 2. Fasten off.
Counts: top/bottom 137, sides 307, total 888.
Why the math works:
- Width: The 133 top sc match the 133 foundation-chain spans at the same 4 sts per in, so the edge neither ruffles nor pulls in.
- Length: On the sides, 3 sc per 0.75 in row equals 4 sc per in. 303 sts covers 75.75 in, which matches the 101 rows exactly.
- Corners: Each round adds 1 sc on each side of each corner, so each side grows by 2 sts per round.
- Finished width: 137 sts = 34.25 in (87.0 cm). The two corner spaces add about 0.25 in (0.6 cm) each, giving 34.75 in (88.3 cm).
- Finished length: 307 sts = 76.75 in (194.9 cm). The two corner spaces add 0.5 in (1.3 cm), giving 77.25 in (196.2 cm).
Tab Tops
With the RS facing, number the 137 top-edge sc of Rnd 3 from right to left. Place markers at sts 1, 27, 53, 79, 105, and 131. Each tab covers 7 sts, with 19 sts between tabs: 6 x 7 + 5 x 19 = 137.
For each tab: Join yarn in the marked st.
- Row 1: Ch 1, sc in the same st and in the next 6 sts. Turn. (7 sc)
- Rows 2–24: Ch 1, sc in each sc. Turn. (7 sc)
Fasten off and leave a 12 in (30.5 cm) tail. The tab is 1.75 in (4.4 cm) wide and 6 in (15.2 cm) tall. Fold it to the WS and whipstitch Row 24 across the base of Rnd 1, behind the same 7 sts. This makes a 3 in (7.6 cm) loop that fits rods up to 1.5 in (3.8 cm) in diameter.
Final Blocking
- Weave in all ends along the solid stitches only, never across open mesh.
- Soak the panel in cool water with a little wool wash for 15 minutes.
- Press out the water without wringing, then roll the panel in towels to remove more.
- Lay it flat on your blocking surface with the RS up.
- Pin the four corners to 34.75 in x 77.25 in (88.3 cm x 196.2 cm).
- Pin along each edge every 3 in (7.6 cm). Keep the edges straight and check the measurements with a tape measure.
- Gently open the diamonds by hand, and pinch each bobble so it sits round.
- Pin the tabs flat at 1.75 in (4.4 cm) wide.
- Leave to dry completely, then repeat for the second panel at the same size.
Final Quality-Control Checklist
- Every Row O, A, and B has 23 points and 22 arches.
- Bobbles line up in staggered columns: 5 on Row A bands and 4 on Row B bands.
- There are 108 bobbles per panel.
- The body measures 33.25 in x 75.75 in (84.5 cm x 192.4 cm) before the border.
- Border Rnd 3 counts are 137 / 307 / 137 / 307.
- There are 6 tabs, evenly spaced, each sewn behind its own 7 sts.
- Both panels match within 0.5 in (1.3 cm) in length.
Troubleshooting
- Panel narrows as you go: You are probably skipping the last arch. Count 23 points on every odd row.
- Edges wave or flare: Your border is too loose or has too many sts. Recount the side sts to 303 in Rnd 1.
- Edges pull in: Your border is too tight. Go up a hook size for the border only.
- Bobbles pop to the wrong side: Bobble rows must be worked with the WS facing. Push them through to the RS before blocking.
- Panel too long after hanging: Cotton can drop slightly. Re-block, or remove one 8-row repeat on your next panel (−6 in / −15.2 cm).
- Tabs twist: Sew them down evenly, keeping all 7 sts aligned with the border sts beneath.
Care
Hand wash or machine wash cool on a gentle cycle in a mesh laundry bag. Dry flat, never by hanging wet, so the mesh doesn’t stretch.

Final Notes
The measurement chain is simple and consistent:
- 4 ch per in sets a 133-ch base, which is 33.25 in (84.5 cm) wide.
- 101 rows at 0.75 in give a 75.75 in (192.4 cm) body.
- The 3-round border brings each panel to 34.75 in x 77.25 in (88.3 cm x 196.2 cm).
- The 3 in (7.6 cm) tabs bring the hanging drop to 80.25 in (203.8 cm).
Check each stage against its checkpoint and your two panels will hang evenly together.
Happy crocheting!