This little gift box ornament looks like a tiny knitted present. The box is worked in waistcoat stitch, which gives a crisp knit-look surface of stacked V columns. It is closed and lightly padded so it has a soft, pillowed shape.
The colors are calm and wintry: a dusty light blue box with cream ribbons, a cream bow with notched tails, and a cream hanging loop. It suits a Scandinavian-style tree or works as a gift topper.
The pattern uses US crochet terms. The finished box measures 3 1/4 in x 3 1/4 in (8.3 cm x 8.3 cm). With the bow and hanging loop, the ornament is about 5 3/4 in (14.6 cm) tall.
You work the box as a short tube in joined rounds so every V faces outward. Then you flatten it, close it, and edge it with a border that also seals in a little stuffing. The ribbons, bow, tails, knot, and loop are small separate parts sewn on top.
Finished Size and Construction
- Finished size: 3 1/4 in x 3 1/4 in (8.3 cm x 8.3 cm) box; about 5 3/4 in (14.6 cm) tall including the loop
- Skill level: Easy-Intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted (#4)
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 ornament (a box body plus 7 small cream appliqué parts)
- Layout: single ornament; no motifs are joined
- Box face before border: 3 in x 3 in (7.6 cm x 7.6 cm)
- Border depth: about 1/8 in (0.3 cm) per edge
Materials
Choose a smooth, plied worsted yarn so the V columns show clearly. Wool blends and acrylic both work well.
- Dusty light blue (box): 12 g, about 24 m
- Cream (ribbons, bow, tails, knot, loop): 8 g, about 16 m
These amounts include a margin of about 20 percent for swatching and sewing tails.
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- About 2 g polyester fiberfill
- Stitch markers
- Scissors, pins, and a blocking mat
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- hdc – half double crochet
- sl st – slip stitch
- st(s) – stitch(es)
- rnd(s) – round(s)
- yo – yarn over
Waistcoat stitch (wst): Insert the hook through the center of the next stitch, between its two front vertical legs and below the top loops. Yo and pull up a loop, then yo and draw through both loops on the hook. When you work these stitches in rounds with the right side always facing, they stack into vertical V columns.
Gauge and Checkpoints
Box gauge: 16 wst and 20 rnds = 4 in (10.2 cm) in joined rounds, which works out to 4 sts and 5 rnds per inch.
Ribbon gauge: 16 sc = 4 in (10.2 cm), or 4 sc per inch.
Waistcoat stitch is dense, so you will usually need a hook one size larger than normal for worsted yarn. Make and check the box body before you start on the cream parts.
Checkpoints:
- After Rnd 1, the flattened ring should measure 3 in (7.6 cm) across.
- After Rnd 8, the tube should be about 1 5/8 in (4.1 cm) tall.
- After Rnd 15, the flattened tube should be 3 in x 3 in (7.6 cm x 7.6 cm).
- After the border, the box should be 3 1/4 in x 3 1/4 in (8.3 cm x 8.3 cm).
If your box is too big, go down 0.5 mm. If it is too small, go up 0.5 mm. Change the hook size, not the stitch counts.

Box Body
Work in joined rounds with the right side always facing. Do not turn.
With blue, ch 24. Without twisting the chain, join with a sl st to the first ch to form a ring.
Rnd 1: Ch 1, sc in each ch around, join with sl st to first sc. (24 sc)
Place markers in sts 1 and 13. Sts 1–12 make the front face and sts 13–24 make the back face. The join sits at one side fold, where the border will hide it.
Rnd 2: Ch 1, wst in each st around, join with sl st to first wst. (24 wst)
Rnds 3–15: Repeat Rnd 2. (24 wst in each rnd)
Fasten off and weave the starting tail in on the inside. Flatten the tube with the join on the right-hand fold. Each face shows 12 V columns.
Tip: The ch 1 and sl st join on every round stop the columns from spiraling, so don’t skip them.
Ribbons (make 2)
Work these in cream, around both sides of a foundation chain. This method leaves a neat chain line down the center of each strip.
Ch 14.
Rnd 1: Sc in 2nd ch from hook and in next 11 ch, 3 sc in last ch. Rotate and work along the opposite side of the chain: sc in next 11 ch, 2 sc in same ch as first sc. Join with sl st to first sc. (28 sc)
Fasten off, leaving a 12 in (30.5 cm) sewing tail.
Check: Each strip should be 3 1/4 in (8.3 cm) long and about 1/2 in (1.3 cm) wide, with 13 sc along each long edge.
Bow Loops
Make 1 in cream using the same method.
Ch 25.
Rnd 1: Sc in 2nd ch from hook and in next 22 ch, 3 sc in last ch. Rotate: sc in next 22 ch, 2 sc in same ch as first sc. Join with sl st to first sc. (50 sc)
Fasten off, leaving a 10 in (25.4 cm) tail.
Check: The strip should be 6 in (15.2 cm) long, with 24 sc along each long edge.
Shaping: Fold each end in to the center so the ends overlap by 1/2 in (1.3 cm). Stitch through all layers at the center, pinch the center into gathers, and wrap the tail around it twice. This gives two rounded loops and a bow about 2 3/4 in (7.0 cm) wide.
Bow Tails (make 2)
Work in rows in cream.
Ch 4.
Row 1: Sc in 2nd ch from hook and in each ch across. (3 sc)
Rows 2–7: Ch 1, turn, sc in each st across. (3 sc)
Row 8 (notched end): Ch 1, turn, (sc, hdc) in first st, sl st in next st, (hdc, sc) in last st. (5 sts: 3 worked 1 per existing st + 2 extra sts added)
The hdc form two small peaks, and the center sl st pulls down between them to make the V notch. Fasten off and weave in the end. Use the starting tail at the Row 1 end for sewing.
Check: Each tail should be 3/4 in (1.9 cm) wide and about 1 3/4 in (4.4 cm) long.
Center Knot
Ch 5 in cream.
Row 1: Sc in 2nd ch from hook and in each ch across. (4 sc)
Rows 2–3: Ch 1, turn, sc in each st across. (4 sc)
Fasten off, leaving an 8 in (20.3 cm) tail. The knot strip should be 1 in (2.5 cm) long.
Hanging Loop
Ch 26 in cream.
Row 1: Sl st in back bump of 2nd ch from hook and in back bump of each ch across. (25 sl st)
Fasten off. The cord should be about 6 in (15.2 cm) long, with a knit-look front.
Border
The border closes the top and bottom of the tube, holds the stuffing in, and forms the rounded rim.
Border gauge: 4 sc per inch. Each face is 12 sts wide, so 12 sc fit neatly along each 3 in (7.6 cm) edge.
Keep the join on the right fold. Pair the top stitches across both layers: st 1 with st 24, st 2 with st 23, and so on, ending with st 12 and st 13. The foundation chain at the bottom pairs up the same way.
Rnd 1: With the front facing, join blue with a sl st through both layers at the top-right corner pair.
- Top: Ch 1, 3 sc in the corner pair. Working through both layers, sc in each of the next 10 pairs, then 3 sc in the top-left corner pair. (16 sc so far)
- Left side: Working along the sides of the rnds, sc in next 6 rnds, skip next rnd, then repeat from * once more. (12 sc; 28 so far)
- Stuff: Spread about 2 g of fiberfill evenly through the open bottom so the face is gently pillowed.
- Bottom: 3 sc in the bottom-left corner pair, sc through both layers in each of the next 10 pairs, then 3 sc in the bottom-right corner pair. (16 sc; 44 so far)
- Right side: Sc in next 6 rnds, skip next rnd, then repeat from * once more. (12 sc; 56 so far)
Join with sl st to first sc. (56 sc)
Per-side counts (each count includes both corner center sts):
- Top and bottom: 14 each (corner + 1 + 10 + 1 + corner)
- Left and right: 16 each (corner + 1 + 12 + 1 + corner)
- 14 + 16 + 14 + 16 = 60, minus the 4 corner sts counted twice = 56 ✓
Rnd 2 (trim): Sl st in each sc around and join. (56 sl st: 56 worked 1 per st + 0 added)
Fasten off and hide the tail inside the box.
Why the math works: The face is 12 sts at 4 sts per inch, which gives 3 in (7.6 cm). The side is 15 rnds at 5 rnds per inch, which also gives 3 in (7.6 cm). On each side, the 14 rnds get only 12 sc, which matches the 4 sc per inch border gauge. The 3-sc corners turn cleanly, and the border adds 1/8 in (0.3 cm) per edge, for a finished size of 3 1/4 in (8.3 cm) square.
Assembly
- Vertical ribbon: Center it over the front between the 6th and 7th V columns, with the ends meeting the top and bottom border. Whipstitch both long edges through the front layer only.
- Horizontal ribbon: Place its center line 1 1/2 in (3.8 cm) below the top edge, with the ends meeting the side borders. Sew both long edges, stitching through both ribbons where they cross.
- Tails: Sew the Row 1 ends together at the top center, just below the border. Angle the notched ends down and outward, and tack each tail once at its midpoint.
- Bow: Center the bow over the tail ends so the loops rise slightly above the rim. Sew through the bow center into the box.
- Hanging loop: Fold the cord in half. Sew both ends behind the bow center so they overlap the top border by 1/2 in (1.3 cm). The loop should rise about 2 1/2 in (6.4 cm).
- Knot: Wrap it around the bow center so it covers the loop ends, then sew the short ends together at the back.
Final Blocking
- Lightly mist the ornament with water. Don’t soak it, because it is stuffed.
- Lay it face up on a blocking mat.
- Ease the box into a 3 1/4 in x 3 1/4 in (8.3 cm x 8.3 cm) square and pin each corner.
- Straighten the ribbons so they cross at right angles.
- Round out the bow loops, fan out the tails, and pin the hanging loop into a teardrop shape.
- Let it dry for at least 6 hours.
Final Quality-Control Checklist
- The box measures 3 1/4 in x 3 1/4 in (8.3 cm x 8.3 cm).
- The V columns run straight up and down with no spiral.
- The join is hidden on the right fold.
- Border Rnd 1 has 56 sc and Rnd 2 has 56 sl st.
- The stuffing is even, with no lumps at the corners.
- The ribbons are centered and reach edge to edge.
- Both tails have clear V notches.
- The bow loops are the same size.
- The hanging loop is secure and the ornament hangs level.
Troubleshooting
The columns lean: Join every round, and work between the front legs, not under the top loops.
The box is too wide: Your wst are loose. Go down a hook size.
The sides ruffle: You probably worked into every round. Skip 1 round after every 6 sc.
The corners cup: Work exactly 3 sc in each corner pair.
The ribbons are too long: Remove 1 ch and work 1 fewer sc along each long side.
The ornament tilts: Re-center the loop ends behind the knot.
Care
Spot clean with cool water and mild soap, then reshape and dry flat. Store it hanging or flat, away from heat.

Final Notes
The measurement chain is short. Twelve waistcoat stitches per face at 4 per inch make 3 in (7.6 cm), and 15 rounds at 5 per inch also make 3 in (7.6 cm). The 56-stitch border adds 1/8 in (0.3 cm) per edge, for a 3 1/4 in (8.3 cm) square box. The 13-stitch ribbon edges match that width exactly, and the 6 in (15.2 cm) bow strip folds into a 2 3/4 in (7.0 cm) bow. Check each stage as you go, and your little parcel will come together neatly.
Happy crocheting!