This small lace heart has bands of cream shells set inside a red chain-loop lattice, all framed by a firm red border. The two-color look reminds you of peppermint candy and old-fashioned Christmas ornaments. One heart looks good on its own, and a few of them make a warm display on a tree.
The palette is cranberry red and cream. The style is traditional thread lace: open diamonds, soft fans and a neat outline that keeps the shape crisp. This pattern uses US crochet terms throughout.
The finished heart measures about 4 in (10.2 cm) wide and 4 in (10.2 cm) tall, not counting the hanging loop. The loop adds about 2 in (5.1 cm).
You work the heart in rows from the bottom point upward, switching between red mesh rows and cream shell rows. Each red increase row adds one chain loop, so the heart widens evenly. A final red row shapes the two lobes. Then two rounds of red border go all the way around, and a cream cord loop finishes the piece.
Finished Size and Construction
- Finished size: 4 in x 4 in (10.2 cm x 10.2 cm), not counting the loop
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Size 3 crochet cotton thread (fine, sport-weight feel)
- Hook: 2.5 mm
- Number of pieces: 1 heart plus 1 hanging cord
- Layout: Single motif, worked bottom-up in rows
- Piece size before border: 3.5 in x 3.5 in (8.9 cm x 8.9 cm)
- Border depth: 2 rounds, about 0.25 in (0.6 cm) on each edge
Materials
Use a mercerized cotton thread. It gives clean shells and a slight sheen, and it holds its shape after blocking. Avoid fuzzy or very stretchy fibers, which blur the lattice.
- Red (cranberry): 10 g, about 45 m
- Cream: 5 g, about 23 m
These quantities include a margin for swatching and weaving in ends. One heart uses a little less than this.
Tools:
– 2.5 mm crochet hook
– Tapestry needle
– Scissors
– Rust-proof pins and a foam blocking mat
– Spray bottle with water
– Optional: light spray starch
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS – right side
Special stitches:
– Shell: Work 9 dc in the same chain loop. The center of the shell is the 5th dc.
– Ch-5 loop: Ch 5, then sc in the next anchor stitch named in the instructions. The ch-5 together with its closing sc makes one loop of the mesh.
Gauge and Checkpoints
Gauge: 8 sc = 1 in (2.5 cm) in red thread. In the body, one band made of a cream shell row plus its 2 red mesh rows is about 1 in (2.5 cm) tall.
There is only one piece, so the heart itself is your test. Work it through Row 4 and measure before you go further.
- After Row 4 (first shell): about 1.5 in (3.8 cm) wide across the shell
- After Row 7: about 2.5 in (6.4 cm) wide and 2 in (5.1 cm) tall
- After Row 10: about 3.25 in (8.3 cm) wide
- After Row 12: 3.5 in x 3.5 in (8.9 cm x 8.9 cm)
- After the border: 4 in x 4 in (10.2 cm x 10.2 cm)
If your heart is too big, go down to a 2.25 mm hook or work the chain loops a little tighter. If it is too small, go up to a 2.75 mm hook. Do not change the number of chains in a loop, because the shell placement depends on it.

Pattern: The Heart Body
Color changes: To change color, fasten off the old color and leave a 6 in (15.2 cm) tail. Join the new color in the last stitch you worked, then keep working back across the row as if you had turned. Rows are always turned, so the heart is reversible.
Bottom Point (Red)
Row 1: With red, ch 2. Work 3 sc in the 2nd ch from the hook. Turn. (3 sc)
Row 2: Ch 1. Sc in the first sc, ch 5, sc in the next sc, ch 5, sc in the last sc. Turn. (3 sc, 2 ch-5 loops)
Row 3 (increase mesh row): Ch 1. Sc in the first sc, ch 5, sc in the first loop, ch 5, sc in the next loop, ch 5, sc in the last sc. Fasten off. (4 sc, 3 ch-5 loops)
How the increase mesh row works: You place a loop between the edge sc and the first loop, one between each pair of loops, and one between the last loop and the edge sc. That turns k loops into k + 1 loops. You use this same rule in Rows 6 and 9.
First Shell Band
Row 4 (cream): Join cream in the last sc. Ch 1, sc in the same sc, ch 2, sc in the first loop, shell in the next loop, sc in the next loop, ch 2, sc in the last sc. Fasten off. (4 sc, 1 shell of 9 dc, 2 ch-2 sps; 13 sts total)
This makes the single cream fan at the bottom of the heart. The ch-2 spaces keep the edges flat without pulling the shell sideways.
Row 5 (red, anchor mesh row): Join red in the last sc. Ch 1, sc in the same sc, ch 5, sk the ch-2 sp, sc in the next sc, ch 5, sc in the 5th dc of the shell, ch 5, sc in the next sc, ch 5, sk the ch-2 sp, sc in the last sc. Turn. (5 sc, 4 ch-5 loops)
How the anchor mesh row works: The anchors are the 2 edge sc, every inner sc, and the center of every shell, and you always skip the ch-2 spaces. With s shells there are 2s + 3 anchors, which gives 2s + 2 loops.
Row 6 (red, increase mesh row): Work the increase mesh row. Fasten off. (6 sc, 5 ch-5 loops)
Second Shell Band
Row 7 (cream): Join cream in the last sc. Ch 1, sc in the same sc, ch 2, sc in the first loop, [shell in the next loop, sc in the next loop] 2 times, ch 2, sc in the last sc. Fasten off. (5 sc, 2 shells, 2 ch-2 sps; 23 sts total)
Checkpoint: about 2.5 in (6.4 cm) wide and 2 in (5.1 cm) tall.
Row 8 (red, anchor mesh row): Join red in the last sc. Ch 1, sc in the same sc, ch 5, sk the ch-2 sp, sc in the next sc. Ch 5, sc in the 5th dc of the next shell, ch 5, sc in the next sc; repeat from * once more. Ch 5, sk the ch-2 sp, sc in the last sc. Turn. (7 sc, 6 ch-5 loops)*
Row 9 (red, increase mesh row): Work the increase mesh row. Fasten off. (8 sc, 7 ch-5 loops)
Third Shell Band
Row 10 (cream): Join cream in the last sc. Ch 1, sc in the same sc, ch 2, sc in the first loop, [shell in the next loop, sc in the next loop] 3 times, ch 2, sc in the last sc. Fasten off. (6 sc, 3 shells, 2 ch-2 sps; 35 sts total)
Checkpoint: about 3.25 in (8.3 cm) wide.
Lobe Shaping (Red)
Row 11 (red, anchor mesh row): Join red in the last sc. Ch 1, sc in the same sc, ch 5, sk the ch-2 sp, sc in the next sc. Ch 5, sc in the 5th dc of the next shell, ch 5, sc in the next sc; repeat from * 2 more times. Ch 5, sk the ch-2 sp, sc in the last sc. Turn. (9 sc, 8 ch-5 loops)*
The 5th sc of this row sits on the center of the middle shell. That stitch becomes the dip of the heart.
Row 12 (top lobes): Ch 1, sc in the first sc. [Ch 5, sc in the next loop] 4 times. Ch 2, sl st in the 5th (center) sc of Row 11, ch 2. [Sc in the next loop, ch 5] 4 times. Sc in the last sc. Do not fasten off. (10 sc, 8 ch-5 loops, 2 ch-2 sps, 1 sl st)
Each lobe now has 1 edge sc, 4 ch-5 loops, 4 sc and 1 ch-2 space. Pulling down to the sl st at the center makes the dip.
Checkpoint: 3.5 in x 3.5 in (8.9 cm x 8.9 cm).
Border
Border gauge is the same as body gauge: 8 sc = 1 in (2.5 cm). Work with the RS facing (choose whichever side you prefer). Go around the heart in this order: right lobe, right side, bottom point, left side, left lobe.
Round 1 (red): Ch 1, and work sc evenly as follows.
- Right lobe: 2 sc in each ch-2 sp next to the dip, 5 sc in each of the 4 ch-5 loops, and 2 sc in the Row 12 row-end. (2 + 20 + 2 = 24 sc)
- Right side: 3 sc in each row-end of Rows 11 through 2, then 1 sc in the Row 1 row-end. (30 + 1 = 31 sc)
- Bottom point: 3 sc in the underside of the Row 1 foundation ch. (3 sc)
- Left side: Mirror the right side. (31 sc)
- Left lobe: Mirror the right lobe. (24 sc)
Sl st in the first sc to join. (113 sc: 24 + 31 + 3 + 31 + 24)
Round 2 (red, trim round): Ch 1.
- Right lobe (24 sts): Sc in the next 2, hdc in the next 4, 2 hdc in each of the next 6, hdc in the next 6, sc in the next 6. (24 worked 1 per st + 6 extra = 30)
- Right side: Sc in each of the 31 sts. (31)
- Point: Sc in the next st, 3 sc in the center st, sc in the next st. (3 + 2 extra = 5)
- Left side: Sc in each of the 31 sts. (31)
- Left lobe (24 sts): Sc in the next 6, hdc in the next 6, 2 hdc in each of the next 6, hdc in the next 4, sc in the next 2. (24 + 6 extra = 30)
Sl st in the first sc to join. Fasten off. (113 worked 1 per st + 14 extra = 127 sts: 30 + 31 + 5 + 31 + 30)
Why the math works: Each mesh or shell row is about 0.31 in (0.8 cm) tall. Three sc at 8 sc per inch cover about 0.375 in (1 cm). That small extra length allows for the curved, diagonal side edge, so the border lies flat instead of cupping. The hdc increases sit over the tops of the lobes and round them out. The sc next to the dip stay short, which keeps the dip sharp. Two rounds add about 0.25 in (0.6 cm) on every edge, taking the heart from 3.5 in (8.9 cm) to 4 in (10.2 cm) in both directions.
Hanging Cord (Cream)
Ch 41. Sl st in the back bump of the 2nd ch from the hook and in each ch across. (40 sl st)
The cord is about 4 in (10.2 cm) long. Fold it in half to make a 2 in (5.1 cm) loop. Sew both ends to the border at the center dip, stitching through both border rounds. Weave in the ends.
Final Blocking
- Weave in all ends inside the red border or along the backs of the shells.
- Wet the heart in cool water and press out the excess in a towel. Do not wring it.
- Lay it on the blocking mat and pin it to 4 in x 4 in (10.2 cm x 10.2 cm).
- Pin the bottom point first, then the center dip, then the top of each lobe.
- Open each chain loop into a diamond and fan each shell evenly with your fingertips.
- If you like, mist with spray starch for a stiffer ornament.
- Leave it pinned until it is completely dry.
Final Quality-Control Checklist
- The shell bands read 1, 2 and 3 shells from bottom to top.
- Each shell has 9 dc and is centered over its loop.
- Every mesh row has the stated number of loops: 2, 3, 4, 5, 6, 7 and 8.
- The center dip lines up with the middle shell of Row 10.
- Border Round 1 has 113 sts and Round 2 has 127 sts.
- The heart measures 4 in x 4 in (10.2 cm x 10.2 cm).
- The cord is centered and both ends are firmly secured.
- No color tails show on either side.
Troubleshooting
- Shells ruffle: Your loops are too short. Chain more loosely, or go up a hook size for the shell rows only.
- Mesh pulls in at the sides: Check that each increase row starts and ends in the edge sc.
- Lobes are lopsided: Count 4 loops on each side of the Row 12 sl st.
- Border waves: Work 2 sc instead of 3 in one or two row-ends per side, and keep the total even on both sides.
- Border cups: Add 1 sc in two of the row-ends on each side.
- Dip is shallow: Pull the Row 12 sl st snug, and tighten the sc beside it in Round 2.
Care
Hand wash in cool water with mild soap, then reshape and dry flat. Re-starch if needed, and store flat between tissue paper.

Final Notes
Here is the measurement chain: 8 sc = 1 in (2.5 cm) sets the gauge. The heart grows to about 1.5 in (3.8 cm) at Row 4, 2.5 in (6.4 cm) at Row 7, 3.25 in (8.3 cm) at Row 10, and 3.5 in (8.9 cm) square at Row 12. The border rounds go 113 then 127 stitches and bring it to 4 in x 4 in (10.2 cm x 10.2 cm). Check each step and the finished heart will come out right.
Happy crocheting!