Blossom Lattice Door Curtain Crochet Pattern

This curtain is made of seven lacy flower strips that hang side by side from a rod. Every strip is a column of six-petal flowers with bobble centers. A chain lattice frames each flower, and the lattice ties into straight rails along both edges. Small pointed leaves fill the side notches between flowers. Light passes through freely, and the strips sway apart as you walk through.

The colorway alternates coral pink and cream. Four pink strips and three cream strips make a soft cottage look that works in a doorway, a closet opening, or a sunny pantry.

All instructions use US crochet terms. Each finished strip measures 5.75 in (14.6 cm) wide and 78 in (198.1 cm) long, not counting the hanging tabs. Seven strips spaced 0.75 in (1.9 cm) apart cover 44.75 in (113.7 cm) of rod.

Each flower is worked in the round, then framed with chain loops. You join the flowers into a strip as you go, and a two-round border adds the leaves, side rails, and hanging tabs. The strips are never sewn to each other. Each one hangs from the rod on its own.

Finished Size and Construction

  • Finished strip: 5.75 in (14.6 cm) wide × 78 in (198.1 cm) long, plus 3 in (7.6 cm) tabs
  • Finished curtain: 44.75 in (113.7 cm) across the rod, 81 in (205.7 cm) from the rod top to the hem
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5 mm (H-8)
  • Number of pieces: 98 flower motifs joined into 7 separate strips
  • Layout: 7 strips × 14 motifs each
  • Motif size: 5.5 in (14.0 cm) tall tip to tip × 4.75 in (12.1 cm) wide
  • Strip size before border: 4.75 in (12.1 cm) × 77 in (195.6 cm)
  • Border depth: 0.5 in (1.3 cm) on every edge

Materials

Use a smooth, mercerized or matte worsted cotton. Cotton keeps the petals crisp and the rails straight, and it won’t stretch much as the strips hang. Acrylic will drape more and may grow in length over time.

  • Color A, coral pink: 800 g, about 1,200 m (4 strips)
  • Color B, cream: 600 g, about 900 m (3 strips)

Each strip uses roughly 175 g (262 m). These quantities include a margin of about 14% for gauge swatches and differences between dye lots.

Tools:
– 5 mm (H-8) hook
– Tapestry needle
– Stitch markers
– Scissors
– Measuring tape
– Blocking mats and rust-proof pins
– Spray bottle
– Curtain rod, 48 in (121.9 cm) or longer, up to 1.25 in (3.2 cm) in diameter

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • tr: treble crochet
  • sp: space
  • st(s): stitch(es)

Bobble: Yarn over, insert the hook in the stitch, and pull up a loop. Yarn over and pull through 2 loops. Repeat this 2 more times in the same stitch, so you have 4 loops on the hook. Yarn over and pull through all 4 loops.

Leaf: Ch 7. Sl st in the 2nd ch from the hook, then work 1 sc, 1 hdc, 1 dc, 1 hdc, and 1 sc in the next 5 ch. That makes 6 sts on a 7-ch spine. Leaf stitches are never included in border counts.

Gauge and Checkpoints

Gauge: 14 sc and 16 rows = 4 in (10.2 cm).

Make one full motif before you start a strip, and check it at each of these points:

  • After Round 2: the center measures 1.25 in (3.2 cm) across.
  • After Round 4: the flower measures 5.5 in (14.0 cm) from top petal tip to bottom petal tip.
  • After Round 5: the flower still measures 5.5 in (14.0 cm) tall, and it measures 4.75 in (12.1 cm) between the two vertical side loops.

If your motif is more than 0.25 in (0.6 cm) too big, go down half a hook size. If it’s too small, go up half a size. If only the frame is off, change your chain tension and leave the hook alone. Loops that are too tight pull the petal tips inward, and loose loops sag.

Close-up of pink crocheted lace with flower and leaf motifs on white marble surface.

Flower Motif

For this pattern, the six petal tips are named like a clock face: T (12 o’clock), R1 (2 o’clock), R2 (4 o’clock), B (6 o’clock), L2 (8 o’clock), and L1 (10 o’clock).

Round 1: Make a magic ring. Ch 1, work 6 sc in the ring, and sl st to the first sc. Pull the ring closed. (6 sc)

Round 2: Ch 1. Bobble in the next sc, ch 1. Repeat from * 5 more times, then sl st to the top of the first bobble. (6 bobbles + 6 ch-1 sp = 12 sts)

Round 3 (petal first halves): Sl st into the first ch-1 sp.
In the ch-1 sp, work 1 sc. Ch 11. Starting in the 2nd ch from the hook, work 1 sc, 1 hdc, 2 dc, 2 tr, 2 dc, 1 hdc, and 1 sc, one stitch in each of the next 10 ch, toward the center. Sl st in the same ch-1 sp.
Repeat from * in each of the remaining 5 ch-1 sps. (6 half-petals, 10 sts each on an 11-ch spine)

The skipped chain at the far end of each spine is the petal tip.

Round 4 (petal second halves): Sl st in the base sc of the first petal.
Work along the free loops of the spine from the base toward the tip: 1 sc, 1 hdc, 2 dc, 2 tr, 2 dc, 1 hdc, 1 sc (10 sts). In the tip ch, work (sc, ch 2, sc). Now work back down the Round 3 side: sl st in the back loop of each of the 10 sts. Then sl st in the base sc of the next petal.
Repeat from * 5 more times, ending with a sl st in the first base sc. Fasten off. (6 petals of 22 sts + 1 ch-2 tip sp each)

That slip-stitch return leaves a raised ridge along one edge of each petal.

Round 5 (frame): Join yarn in the ch-2 tip sp at T.
Sc in the tip sp, ch 9. Repeat from * in each of the next 5 tip sps (R1, R2, B, L2, L1). Sl st to the first sc. Fasten off. (6 sc + 54 ch = 60 sts)

Round 5 doesn’t add height. The frame passes through the petal tips, so the motif stays 5.5 in (14.0 cm) tall, and the R1–R2 and L2–L1 loops become its straight vertical sides.

Make All Pieces

Each strip has 14 motifs. Only the first motif of a strip is made completely on its own. Motifs 2–14 get joined during their Round 5.

  • Color A (pink): 56 motifs (4 strips × 14)
  • Color B (cream): 42 motifs (3 strips × 14)
  • Total: 98 motifs

Curtain layout, viewed from the room side (each letter is one strip of 14 stacked motifs):

Strip:   1   2   3   4   5   6   7
Color:   A   B   A   B   A   B   A
Rows:   14  14  14  14  14  14  14

Joining

Within a strip (join-as-you-go): Work Rounds 1–4 of the new motif. Join yarn in its T tip sp and sc there. Sl st in the B sc of the previous motif, then continue Round 5 as written. The joining sl st doesn’t count, so the motif still has 60 sts.

That’s one point of contact per seam, tip to tip, so each joined motif adds exactly 5.5 in (14.0 cm). Keep the joining sl st snug and the same size as your chains. If it’s loose, the strip stretches and the flowers start to rotate.

Size checkpoints:
– 2 motifs = 11 in (27.9 cm)
– 3 motifs = 16.5 in (41.9 cm)
– 14 motifs = 77 in (195.6 cm), measured flat without stretching

Between strips: The strips are not joined to each other. Each one hangs independently from its own two tabs (see Border).

Border

The border is worked around each strip separately, in the same color as that strip.

Border gauge: One stitch per chain. Round 2 puts exactly one sc on each stitch and each chain from Round 1, so the rails lie flat at the strip’s own width.

Per-motif side count: On one long side, each motif gives 13 border sts: sc in R1, ch 5, sc in the side loop, ch 5, sc in R2. Those 13 include the motif’s two corner tips. Between motifs there’s a notch with ch 4, a leaf, and ch 4, which adds 8 sts. Those notch sts are separate from the motif’s 13 and are not part of it.

Round 1 (lattice and leaves): Join with sc in the T sc of motif 1. Ch 4, sc in the middle of the T–R1 loop, ch 4.

Right side, for motifs 1 to 14: Sc in R1, ch 5, sc in the middle of the R1–R2 loop, ch 5, sc in R2. After motifs 1–13 only, work ch 4, a leaf, and ch 4, then move on to the next motif. Push each leaf toward the flowers.

Bottom: Ch 4, sc in the R2–B loop, ch 4, sc in the B sc, ch 4, sc in the B–L2 loop, ch 4.

Left side, motifs 14 back to 1: Sc in L2, ch 5, sc in the L2–L1 loop, ch 5, sc in L1. After motifs 14–2 only, work ch 4, a leaf, and ch 4.

Top left: Ch 4, sc in the L1–T loop, ch 4. Sl st to the first sc.

Counts:
– Each long side: (14 × 13) + (13 × 8) = 182 + 104 = 286 sts
– Top: 3 sc + 4 ch-4 = 19 sts
– Bottom: 19 sts
– Total: 286 + 286 + 19 + 19 = 610 sts, plus 26 leaves (not counted)

Round 2 (rails and tabs): Ch 1. Work 1 sc in each sc, 4 sc in each ch-4 sp, and 5 sc in each ch-5 sp. Skip the leaves. They stay behind the rail and sit in the notches.

When you reach motif 1’s R1 sc, sc in it, ch 18, and sl st in the same sc to make a tab. Do the same at motif 1’s L1 sc. Sl st to the first sc and fasten off.

Counts: 286 sc per long side and 19 sc on each end, for 610 sc in total, plus 2 ch-18 tabs.

Tab reinforcement: Join yarn at the base of each tab. Work 24 sc into the ch-18 loop, sl st at the base, and fasten off. Using 24 sc on 18 ch keeps the tab from curling, and the finished tab hangs 3 in (7.6 cm).

Why the math works: Round 1 sits on fixed points: the tips and loop centers. Round 2 matches Round 1 one-for-one, with 610 stitches on 610 stitches. Both rounds keep the strip’s 4.75 in (12.1 cm) width and add only 0.5 in (1.3 cm) per side, which gives 5.75 in (14.6 cm). The ends grow the same way, from 77 in (195.6 cm) to 78 in (198.1 cm).

Final Blocking

  1. Weave in all ends, and run each one back through a petal or rail for 1 in (2.5 cm).
  2. Spray the strip evenly until it’s damp, not dripping.
  3. Lay it flat on the mats in sections and pin the rails straight first, 5.75 in (14.6 cm) apart.
  4. Pin each T and B tip on the center line, every 5.5 in (14.0 cm).
  5. Pin the petal tips outward and smooth each bobble center with your fingers.
  6. Tuck each leaf into its notch with one pin at its point.
  7. Let it dry completely, then unpin and block the next section.

Final Quality-Control Checklist

  • Every motif has 6 petals, 6 bobbles, and a 60-st frame.
  • One petal points straight up and one straight down in every motif.
  • Each strip has 14 motifs and is 78 in (198.1 cm) long.
  • The rails are straight and 5.75 in (14.6 cm) apart.
  • Each long side has 286 sc, and 13 leaves sit in the notches.
  • Both tabs are reinforced and equal in length.
  • There are 4 pink and 3 cream strips, alternating.

Troubleshooting

  • The petals cup: Your tr stitches are too tight. Pull up the loops a little taller.
  • The frame puckers: Your chains are too tight. Ch more loosely or use a hook half a size larger for Round 5 only.
  • The strip twists when hung: Check that every T-to-B join sits on the center line, and redo any join that’s off.
  • The rails wave: Recount Round 2. It should be 4 sc per ch-4 and 5 sc per ch-5.
  • Strips of different lengths: Block them all to 78 in (198.1 cm), and redo any strip that’s off by more than 0.5 in (1.3 cm).
  • A leaf pokes outward: Re-pin it during blocking, or tack its tip down with the yarn tail.

Care

Hand wash in cool water with mild soap, then press out the water in a towel. Dry the strips flat and re-pin them to size if they need it.

Crocheted flower curtain strips in coral and cream hanging in a doorway, flanked by potted plants on a hardwood floor.

Final Notes

The measurement chain is simple. A 5.5 in (14.0 cm) motif × 14 gives 77 in (195.6 cm). The 610-stitch border adds 0.5 in (1.3 cm) all around, so each strip is 5.75 in × 78 in (14.6 cm × 198.1 cm). Seven strips with 0.75 in (1.9 cm) gaps fill 44.75 in (113.7 cm) of rod. If your first motif is right, everything after it will be too.

Happy crocheting!

Leave a Comment