This bag holder is a tall, open lace tube in cream yarn with a cozy hedgehog on the front. The hedgehog wears a red Santa hat with a white brim and pompom, with two green holly leaves and three red berries at its feet. Bags go in through the scalloped top and pull out through the round opening at the bottom.
The body uses a fan-and-arch lace, so each row of double crochet fans sits halfway between the fans below. A firm, rolled single crochet band frames the bottom opening, soft scallops finish the top, and a covered ring on a short tab lets it hang from a hook.
All instructions use US terms. The body measures 7 in (17.8 cm) wide and 13 in (33.0 cm) tall, laid flat, and the holder hangs about 17 in (43.2 cm) long including the ring.
You work the body bottom-up in joined rounds as one seamless tube, cover the ring and add a tab, then crochet the appliqués and sew them to the front.
Finished Size and Construction
- Finished size: body 7 x 13 in (17.8 x 33.0 cm), flat; about 17 in (43.2 cm) long with the ring
- Skill level: Intermediate
- Terminology: US
- Yarn weight: worsted (#4) cotton
- Hooks: 4.5 mm (US 7) for body and ring, 3.75 mm (US F-5) for appliqués
- Number of pieces: 1 body, 1 covered ring with tab, 1 hedgehog, 1 hat, 1 pompom, 2 holly leaves, 3 berries
- Layout: one tube; ring on the top back, appliqué stack on the lower-middle front
- Body size before border: 7 x 12.25 in (17.8 x 31.1 cm), flat
- Border depth: 0.75 in (1.9 cm) of top scallops, plus a 2-round rolled trim at the opening
Materials
Use a smooth worsted cotton or cotton blend; it holds the lace shape when the holder is full. Amounts assume about 1.7 m per gram.
- Cream: 130 g, about 221 m (body, ring, hedgehog face)
- Brown: 15 g, about 26 m (quills, embroidery)
- Red: 15 g, about 26 m (hat, berries)
- White: 6 g, about 10 m (brim, pompom)
- Green: 6 g, about 10 m (holly leaves)
- Black: 2 g, about 3 m (eyes, nose)
- Pink: 1 g, about 2 m (cheeks)
All quantities include a margin of about 15% for swatching and tails.
Tools: 4.5 mm (US 7) and 3.75 mm (US F-5) hooks; one 2.5 in (6.4 cm) metal or plastic ring; tapestry needle; stitch markers; optional 6 mm black safety eyes; stiff cardboard about 6 x 12 in (15.2 x 30.5 cm); pins; scissors.
Abbreviations (US Terms)
- ch = chain; sl st = slip stitch; st(s) = stitch(es)
- sc = single crochet; hdc = half double crochet; dc = double crochet
- sc2tog / sc3tog = single crochet 2 / 3 together
- inc = 2 sc in the same stitch; MR = magic ring
Special stitches:
– 7-dc fan / 9-dc fan: 7 or 9 dc worked into the same chain loop.
– Ch-3 picot: ch 3, sl st in the 3rd ch from hook.
Gauge and Checkpoints
Gauge with the 4.5 mm hook, sc in rounds: 16 sts and 18 rounds = 4 in (10.2 cm).
Lace gauge: 5 repeats of 9-dc fans = 7 in (17.8 cm) wide, flat. One fan round plus one arch round = 1 in (2.5 cm) tall.
Work Rounds 1–8 first as your test piece and check the first two checkpoints.
- After Round 3: 7.5 in (19.1 cm) around (3.75 in / 9.5 cm flat), 0.75 in (1.9 cm) tall.
- After Round 8: 6 in (15.2 cm) wide flat, 3.25 in (8.3 cm) tall.
- After Round 16: 7 in (17.8 cm) wide flat, 7.25 in (18.4 cm) tall.
- After Round 26: 7 in (17.8 cm) wide flat, 12.25 in (31.1 cm) tall.
- After the border: 7 in (17.8 cm) wide flat, 13 in (33.0 cm) tall.
Too big? Go down a hook size. Too small? Go up a hook size. If only the height is off, change each arch by one chain, but keep the fan counts.

Body
Work in joined rounds with the right side facing. Do not turn.
Round 1: With cream and the 4.5 mm hook, ch 30 and join to the first ch without twisting. Ch 1, sc in each ch around, join. (30 sc)
Rounds 2–3: Ch 1, sc in each st around, join. (30 sc)
Round 4 (conversion): Ch 1, sc in the first st, ch 5, skip 2 sts. Sc in the next st, ch 5, skip 2 sts. Repeat from * 8 more times, join. (10 sc worked 1 into every 3rd existing st + 10 ch-5 loops added = 10 sc, 50 ch)
Round 5 (fan round): Ch 1, sc in the same st, 7-dc fan in the next ch-5 loop. Sc in the next sc, 7-dc fan in the next loop. Repeat from * 8 more times, join. (80 sts: 10 sc + 70 dc)
Round 6 (arch round): Sl st in the next 4 dc to reach the center of the fan. Ch 1, sc in the same dc. Ch 5, sc in the 4th dc of the next fan. Repeat from * 8 more times, ch 5, join. (10 sc + 10 ch-5 loops)
Each arch spans the sc between two fans, so the next fans land halfway between the old ones.
Rounds 7–8: Repeat Rounds 5 and 6.
Round 9 (growth round): Ch 1, sc in the same st, 9-dc fan in the next ch-5 loop. Sc in the next sc, 9-dc fan in the next loop. Repeat from * 8 more times, join. (100 sts: 10 sc + 90 dc)
Round 10 (arch round): Sl st in the next 5 dc, ch 1, sc in the same dc. Ch 6, sc in the 5th dc of the next fan. Repeat from * 8 more times, ch 6, join. (10 sc + 10 ch-6 loops)
Rounds 11–26: Repeat Rounds 9 and 10 eight more times, working the fans into ch-6 loops. (Fan rounds: 100 sts; arch rounds: 10 sc + 10 ch-6 loops)
Round 26 is an arch round. Check the Round 16 and Round 26 measurements, and do not fasten off.
Hanging Ring and Tab
Ring cover: With cream and the 4.5 mm hook, work about 46 sc tightly over the 2.5 in (6.4 cm) ring until it is fully covered, then join. It now measures about 2.75 in (7.0 cm) across.
Tab Row 1: Ch 1, sc in the same st and the next 5 sts. Turn. (6 sc)
Rows 2–8: Ch 1, sc across. Turn. (6 sc)
Fasten off with a long tail. The tab is 1.5 in (3.8 cm) wide and 1.75 in (4.4 cm) long.
Appliqués
Use the 3.75 mm hook and leave long tails for sewing.
Hedgehog (one piece, joined rounds)
Round 1: With cream, 6 sc in a MR, join. (6)
Round 2: Ch 1, inc in each st, join. (12)
Round 3: Ch 1, sc, inc 6 times, join. (18)
Round 4: Ch 1, 2 sc, inc 6 times, join. (24)
Round 5: Ch 1, 3 sc, inc 6 times, join. (30)
Round 6: Ch 1, 4 sc, inc 6 times, join. (36) Fasten off cream.
Round 7: Join brown. Ch 1, 5 sc, inc 6 times, join. (42)
Round 8: Ch 1, 6 sc, inc 6 times, join. (48)
Round 9 (quills): Ch 3, sl st in the 2nd ch from hook, sc in the next ch, skip 1 st, sl st in the next st. Repeat from * 23 more times, ending on the joining st. (24 quills)
The hedgehog is about 4 in (10.2 cm) across.
Face: Place the eyes between Rounds 3 and 4, 5 sts apart, just above center. Embroider a black satin-stitch nose at the center and pink cheeks beside the eyes. Backstitch brown arms on Round 5 and feet on Round 6.
Santa hat (in rows)
Row 1: With red, ch 16. Sc in the 2nd ch from hook and in each ch across. Turn. (15)
Rows 2–13: Ch 1, sc2tog, sc across. Turn. Each row has one stitch fewer, ending with 3 sts on Row 13.
Row 14: Ch 1, sc3tog. (1) Fasten off.
Brim: Join white in the first free loop of the foundation chain.
Row 1: Ch 1, sc in each free loop across. Turn. (15)
Rows 2–3: Ch 1, sc in the back loop only of each st across. Turn. (15)
The hat measures about 3.25 in (8.3 cm) wide and 3.5 in (8.9 cm) tall.
Pompom: With white, 6 sc in a MR. Round 2: inc in each st. (12) Round 3: sc around. (12) Round 4: sc2tog 6 times. (6) Tuck the tails inside and cinch it closed. It is about 0.75 in (1.9 cm) across.
Holly leaf (make 2): With green, ch 9. Sl st in the 2nd ch from hook, sc in next ch, hdc in next ch, ch-3 picot, dc in next 2 ch, ch-3 picot, hdc in next ch, sc in next ch, sl st in last ch. Ch-3 picot for the tip. Work the same sequence along the other side of the chain and join to the first sl st. Each leaf is about 1.75 in (4.4 cm) long.
Berry (make 3): With red, 6 sc in a MR. Round 2: sc around. (6) Tuck the tails inside and cinch closed. Each berry is about 0.5 in (1.3 cm).
Border
The border is worked into the 10 arches of Round 26 and adds 0.75 in (1.9 cm). Border gauge: each scallop is 1.4 in (3.6 cm) wide, so 5 scallops = 7 in (17.8 cm) across one flat face.
Round 27 (scallop round): Ch 1, sc in the same st as the join, 9 dc in the next ch-6 loop. Sc in the next sc, 9 dc in the next ch-6 loop. Repeat from * 8 more times, join. (100 sts: 10 sc + 90 dc)
Round 28 (edging): Sl st in the first sc. Sc in each of the next 9 dc, sl st in the next sc. Repeat from * around, ending with sc in the last 9 dc. Join to the first sl st. (100 sts: 90 sc + 10 sl st) Fasten off.
Opening trim: Turn the body upside down and join cream in any free loop of the Round 1 foundation chain.
Trim Rounds 1–2: Ch 1, sc in each free loop (Round 1) or st (Round 2) around, join. (30 sc each round) Fasten off.
Why the math works: All 10 repeats run unchanged from Round 4 to the top. One scallop sits on each arch, so 10 arches give 10 scallops and 100 sts. Laid flat, each face shows 5 whole scallops, and the side folds fall on sc points. The trim works one sc into each of the 30 foundation loops, so the opening stays 7.5 in (19.1 cm) around and simply rolls outward into a thick rim.
Assembly
Slip the cardboard inside the body so you don’t catch the back layer.
- Pin the hedgehog to the front, centered, with its lower edge 2.5 in (6.4 cm) above the bottom band.
- Pin the hat over the top quills, tilted so the brim crosses the head and the tip falls to the right. Sew the pompom to the tip.
- Pin the leaves at the bottom center of the hedgehog in a shallow V, overlapping the lower quills. Cluster the berries where the leaves meet.
- Whipstitch each piece around its edge, catching the dc posts underneath. Sew the hedgehog first, then the hat, leaves and berries.
- Sew the lower 0.5 in (1.3 cm) of the tab to the inside of the back face, centered, so the ring stands above the scallops.
Final Blocking
- Weave in all ends.
- Soak the holder in cool water and squeeze gently. Do not wring.
- Roll it in a towel to remove excess water.
- Slide the cardboard inside and shape the tube to 7 x 13 in (17.8 x 33.0 cm).
- Open each fan with your fingers and pin the top scallops into even curves.
- Let it dry completely, then remove the pins and cardboard.
Final Quality-Control Checklist
- The body is 7 x 13 in (17.8 x 33.0 cm), flat.
- Every lace round has 10 fans or 10 arches, and the fans are staggered.
- The top has 10 even scallops, 5 per face.
- The opening is 7.5 in (19.1 cm) around with an even rolled trim.
- The ring is fully covered, and the tab is centered and secure.
- The hedgehog has 24 quills, and no stitches pass through to the back layer.
Troubleshooting
The tube spirals. Join every round into the first sc and start the next round in that same stitch.
The fans are stacked, not staggered. Fans go into the arches, not into the sc. Re-check Rounds 5 and 9.
The scallops ruffle. Your dc are loose. Use a hook one size smaller for the border.
The hedgehog cups. Your increases are tight. Go up a half hook size, or steam it flat.
Care
Hand wash in cool water and lay flat to dry, reshaping the scallops while damp.

Final Notes
The measurement chain: a 30-stitch band of 7.5 in (19.1 cm) opens into a 6 in (15.2 cm) lower lace section and a 7 in (17.8 cm) main body. Ten repeats run through every round. The body reaches 12.25 in (31.1 cm) before the border and 13 in (33.0 cm) after it, and the ring brings the hanging length to about 17 in (43.2 cm). Check each number as you go, and your hedgehog will keep the bags tidy all season.
Happy crocheting!