The Harbor Teardrop Bag Holder is a hanging grocery-bag dispenser with a curvy hourglass shape. It has five bands of tall, open teardrop loops separated by thick ridged bands of single crochet. You stuff plastic bags in through the top and pull them out one at a time through a small opening at the bottom, which closes with a drawstring bow and two little ball ends.
The sample is made in a deep teal cotton cord, which looks good against cream kitchen cabinets. A warm mustard yellow works just as well if you want a second holder for another door. The open loops let the white bags show through, and the solid bands keep the shape firm.
This pattern uses US crochet terms. The finished body is about 14 in (35.6 cm) tall and about 5 in (12.7 cm) across at the widest bulge. It narrows to about 3.75 in (9.5 cm) at the waist. The handle loop adds about 4 in (10.2 cm), so the holder hangs about 18 in (45.7 cm) from the knob to the bow.
You make it as one seamless tube, worked in joined rounds from the bottom opening up to the top rim. A crocheted handle is worked straight off the rim. The drawstring and ball ends are the only separate bits, and they’re threaded through or sewn on at the end.
Finished Size and Construction
- Finished size: body 14 in (35.6 cm) tall; 16 in (40.6 cm) around at the bulb and rim, 12 in (30.5 cm) around at the waist
- Hanging length: about 18 in (45.7 cm) including the handle
- Skill level: Easy–Intermediate
- Terminology: US
- Yarn weight: Bulky (#5) cotton or cotton-blend cord
- Hook: 6 mm (US J-10)
- Number of pieces: 1 body (with handle attached), plus 1 drawstring and 2 ball ends
- Layout: one vertical tube; bottom opening → bulb → waist → upper flare → rim → handle
- Piece size: 5 in (12.7 cm) diameter at the widest point
- Size before rim: 13 in (33.0 cm) tall after Rnd 22
- Rim depth: 3 rounds, 1 in (2.5 cm)
Materials
Choose a smooth, firm bulky cotton cord or a cotton-blend chunky yarn of about 110 m per 100 g. Cotton holds the teardrop loops open and doesn’t stretch out under the weight of the bags. Avoid very soft acrylic, because the tube will sag.
- Main color (Teal): 170 g, about 187 m
- Optional second holder (Mustard): 170 g, about 187 m
Tools:
- 6 mm (US J-10) crochet hook
- Locking stitch markers (at least 2)
- Tapestry needle
- Scissors
- Measuring tape
- A small handful of yarn scraps to stuff the ball ends
These quantities already include about a 15% margin for your gauge swatch and the drawstring.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- sc2tog – single crochet 2 together
- dc – double crochet
- dtr – double treble crochet (yarn over 3 times, insert hook, pull up a loop, [yarn over, pull through 2] 4 times)
- BLO – back loop only
- sk – skip
- sp – space
- st(s) – stitch(es)
- Rnd – round
Special stitch – Long V (LV): (dtr, ch 2, dtr) all in the same stitch. The two dtr meet at the base and spread apart at the top around the ch-2, so each one forms a tall teardrop. The gap left by the skipped stitches between LVs makes a second, slimmer opening.
Gauge and Checkpoints
Gauge: 12 sc and 12 rounds = 4 in (10.2 cm) in sc. One LV round is 1.5 in (3.8 cm) tall.
Make a quick swatch first. Chain 13, work 12 rows of sc (12 sts), then work 1 row of LVs and 1 row of sc on top. Measure the sc area and the height of the LV row.
Checkpoints:
- After Rnd 5: the base forms a shallow dome about 5 in (12.7 cm) across, with a 2 in (5.1 cm) opening in the middle.
- After Rnd 9: the bulb measures 16 in (40.6 cm) around, and the piece is about 4 in (10.2 cm) tall.
- After Rnd 13: the waist measures 12 in (30.5 cm) around.
- After Rnd 22: the piece is 13 in (33.0 cm) tall.
- After Rnd 25: the body is 14 in (35.6 cm) tall and 16 in (40.6 cm) around the rim.
If your piece is too big, go down to a 5.5 mm (US I-9) hook. If it’s too small, go up to a 6.5 mm (US K-10.5) hook. If only the LV rounds are too short or too tall, keep your hook and change how high you pull up the first loop of each dtr. Don’t change the stitch counts; the shaping depends on them.

Body Pattern
Work in joined rounds and don’t turn. Ch 1 at the start of each sc round doesn’t count as a stitch. Join every round with a sl st in the first stitch. Put a marker in the first stitch of each round.
Base and Bottom Opening
Foundation: Ch 18, sl st in the first ch to form a ring. Don’t twist it.
Rnd 1: Ch 1, sc in each ch around. (18 sc)
Rnd 2 (eyelets): Ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1, sk next st 8 times, join in the 3rd ch of beg ch-4. (9 dc + 9 ch-1 sps = 18 sts)
Rnd 3: Ch 1, 2 sc in each dc and in each ch-1 sp around. (36 sc)
Rnd 4: Ch 1, sc in next 2 sts, 2 sc in next st 12 times. (48 sc)
Rnd 5: Ch 1, sc BLO in each st around. (48 sc)
The BLO round makes the first ridge and turns the sides upward, so the base cups into a dome.
Lower Bulb
Rnd 6 (LV round 1): Ch 5 (counts as dtr), ch 2, dtr in the same st as the join, sk 2 sts, LV in next st, sk 2 sts 15 times, join in the top of beg ch-5. (16 LVs)
Rnd 7: Ch 1, sc in each dtr and 1 sc in each ch-2 sp around. (16 × 3 = 48 sc)
Rnd 8: Ch 1, sc BLO in each st around. (48 sc)
Rnd 9: Ch 1, sc in each st around. (48 sc)
Rnd 10 (LV round 2): Repeat Rnd 6. (16 LVs)
Rnd 11: Repeat Rnd 7. (48 sc)
Waist
Rnd 12 (decrease, BLO): Ch 1, sc BLO in next 2 sts, sc2tog BLO 12 times. (36 sc)
Rnd 13: Ch 1, sc in each st around. (36 sc)
Rnd 14 (LV round 3): Ch 5, ch 2, dtr in the same st, sk 2 sts, LV in next st, sk 2 sts 11 times, join. (12 LVs)
Rnd 15: Ch 1, sc in each dtr and each ch-2 sp. (12 × 3 = 36 sc)
Upper Flare
Rnd 16 (increase, BLO): Ch 1, sc BLO in next 5 sts, 2 sc BLO in next st 6 times. (42 sc)
Rnd 17: Ch 1, sc in each st around. (42 sc)
Rnd 18 (LV round 4): Ch 5, ch 2, dtr in the same st, sk 2 sts, LV in next st, sk 2 sts 13 times, join. (14 LVs)
Rnd 19: Ch 1, sc in each dtr and each ch-2 sp. (14 × 3 = 42 sc)
Rnd 20 (increase, BLO): Ch 1, sc BLO in next 6 sts, 2 sc BLO in next st 6 times. (48 sc)
Rnd 21: Ch 1, sc in each st around. (48 sc)
Rnd 22 (LV round 5): Repeat Rnd 6. (16 LVs)
Every solid band in the middle is 3 rounds: sc into the LV round, then a BLO ridge round (with any shaping), then a plain sc round. That’s why all the bands look the same, with the pebbly ridge in the center.
Border: Top Rim and Handle
Border gauge: 3 sc per inch, so 48 sts = 16 in (40.6 cm) around. With the tube flattened, that’s 24 sts on the front side and 24 sts on the back side.
Rnd 23: Ch 1, sc in each dtr and each ch-2 sp. (48 sc: 24 per side)
Rnd 24: Ch 1, sc BLO in each st around. (48 sc: 24 per side)
Rnd 25: Ch 1, sc in each st around, join in the first sc. (48 sc: 24 per side) Don’t fasten off.
Handle Row 1: Ch 36, then sl st in the 25th st of Rnd 25. Your stitch 1 and stitch 25 are now exactly opposite each other, with 23 free stitches between them on each side.
Handle Row 2: Ch 1, turn, sc in each ch across (36 sc), sl st in st 1 of Rnd 25.
Handle Row 3: Ch 1, turn, sl st BLO in each sc across (36 sl sts), sl st in st 25 of Rnd 25. Fasten off and weave in the end.
Why the math works: Rnd 22 has 16 LVs. Each one gives exactly 3 sc (2 dtr + 1 ch-2 sp), so the rim starts at 16 × 3 = 48. That matches the 48 sts of the bulb, so the rim and the bulb are the same width and the hourglass looks balanced. Because 48 divides evenly, the handle anchors at sts 1 and 25 sit exactly opposite each other, and the holder hangs straight instead of tilting. The 36-st handle is 12 in (30.5 cm) long. Across the 8 in (20.3 cm) flattened rim, it rises about 4 in (10.2 cm), which gives a loop that slips easily over a cabinet knob.
Drawstring and Ball Ends
Drawstring: Ch 72, about 24 in (61.0 cm). Fasten off and leave a 6 in (15.2 cm) tail.
Ball ends (make 2): Make a magic ring.
- Rnd 1: 6 sc in ring. (6 sc)
- Rnd 2: 2 sc in each st. (12 sc)
- Rnd 3: Sc in each st. (12 sc)
- Rnd 4: Sc2tog 6 times. (6 sc)
Stuff each ball firmly with scraps, then close it with the tail. Each ball is about 0.75 in (1.9 cm) across.
Weave the drawstring in and out through the 9 ch-1 eyelets of Rnd 2. Start and finish at the same eyelet. Sew one ball to each end of the drawstring. Pull the drawstring snug enough that bags come out one at a time, then tie a bow.
Final Blocking
- Weave in all ends along the inside of the solid bands, where they won’t show.
- Fill the tube loosely with plastic bags or a rolled towel so the bulb and the upper flare round out.
- Lightly mist or steam the piece. Hold the iron above the yarn and never press it down.
- Use your fingers to open each teardrop so it stands upright with a ch-2 arch at the top.
- Check the measurements: 16 in (40.6 cm) around the bulb, 12 in (30.5 cm) around the waist, and 14 in (35.6 cm) total height.
- Hang the holder by its handle and let it dry completely so it settles into shape.
Final Quality-Control Checklist
- Base: 18-st opening with 9 eyelets; dome 5 in (12.7 cm) across
- LV round counts: 16, 16, 12, 14, 16
- Sc band counts: 48, 36 at the waist, 42, 48 at the rim
- Every middle band has 3 rounds with a BLO ridge in the center
- Body height: 14 in (35.6 cm)
- Handle anchored at sts 1 and 25, exactly opposite each other
- Drawstring passes through all 9 eyelets, and the balls are sewn on securely
- No loose ends show on the outside
Troubleshooting
The teardrops lean to one side. You’re probably starting each LV round on a different stitch. Always begin with the joining stitch, and check that you skip exactly 2 sts between LVs.
The waist doesn’t pull in. Make sure Rnd 12 really ends with 36 sts. If it’s still too loose, go down half a hook size for Rnds 12–15 only.
The bulb looks flat instead of rounded. Your dtr are too short. Pull up the first loop a little higher, and make sure every LV round is 1.5 in (3.8 cm) tall.
The holder twists on the hook. The handle anchors aren’t opposite each other. Count again: 23 free sts on each side.
Bags fall out of the bottom. Tighten the drawstring before tying the bow, or weave it through twice.
The rim ruffles. You may have worked too many sc into a ch-2 space in Rnd 23. Use exactly 1 sc per ch-2 space.
Care
Hand wash in cool water with mild soap, squeeze out the water gently, and reshape it. Hang it by the handle to dry.

Final Notes
The measurement chain is simple. Gauge is 12 sc = 4 in (10.2 cm), and each LV round is 1.5 in (3.8 cm). The base grows from 18 to 48 sts. The bulb holds 16 LVs and 48 sts. The waist pulls in to 12 LVs and 36 sts, the upper flare widens to 14 LVs and 42 sts, and the top returns to 16 LVs and 48 sts. The 3-round rim brings the body to 14 in (35.6 cm), and the 12 in (30.5 cm) handle makes the holder about 18 in (45.7 cm) long when it hangs. If every round count checks out, the teardrops line up and the holder hangs straight.
Happy crocheting!