This little stocking is made of soft lavender lace. Rows of fan stitches sit in open chain arches, and each fan row is shifted half a fan from the row below. A solid cream cuff with a picot top finishes the leg. Cream ovals cover the toe and heel, and a lavender picot edging runs around the foot and leg.
Only two colors are used: lavender and cream. The style is soft and slightly vintage, and the open lace lets the tree lights shine through.
The pattern uses US crochet terms. The finished ornament measures about 4.8 in (12.2 cm) across the foot and 5.7 in (14.5 cm) from the sole edging to the cuff picots. The hanging loop adds about 1.75 in (4.4 cm).
You work the stocking flat in one piece from the sole up:
- The foot is four fans wide.
- The leg continues over three of those fans on the heel side.
- The cream cuff is worked straight onto the last lace row.
- Last, you add a lavender picot edging and a chain loop, then sew on two small cream ovals.
Finished Size and Construction
- Finished size: 4.8 in (12.2 cm) wide x 5.7 in (14.5 cm) tall, plus a 1.75 in (4.4 cm) loop
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Sport / #2 mercerized cotton
- Hook: 2.75 mm (C-2)
- Number of pieces: 1 stocking body (with the cuff, edging and loop worked on) + 2 oval appliqués
- Layout: A single ornament. Nothing needs joining.
- Body size before edging: 4.2 in (10.7 cm) wide at the foot, 3.2 in (8.1 cm) wide at the leg, 5.4 in (13.7 cm) tall
- Edging depth: about 0.3 in (0.8 cm)
- Ovals: about 1.3 in x 0.7 in (3.3 cm x 1.8 cm) each
Materials
Choose a smooth mercerized cotton in sport weight. It keeps the fans and picots crisp and blocks flat. Fuzzy acrylic will hide the lace.
- Lavender (main color): 8 g, about 24 m (26 yd), for the body, edging and loop
- Cream (contrast): 4 g, about 12 m (13 yd), for the cuff and ovals
These quantities include a margin for a test piece and for weaving in ends.
Tools
- 2.75 mm (C-2) hook
- Tapestry needle
- Scissors
- 2 stitch markers
- Rust-proof pins and a blocking mat
- Spray bottle
- Ruler
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- dc: double crochet
- sp(s): space(s)
- st(s): stitch(es)
- tch: turning chain
- RS: right side
- rep: repeat
Special stitches
- Fan: 7 dc in the same ch-5 sp.
- Half fan: at the start of a row, ch 3 (counts as dc) + 3 dc in the same sp, for 4 dc. At the end of a row, 3 dc in the sp + 1 dc in the tch, also 4 dc.
- Picot: ch 3, sl st in 3rd ch from hook.
Gauge and Checkpoints
Gauge:
- Width: 6 sc = 1 in (2.5 cm).
- Height: one 4-row lace repeat (fan row, arch row, fan row, arch row) = 1 in (2.5 cm).
- Edges: 6 sc per 1 in (2.5 cm) along every edge.
Test the foot first. The foot (Rows 1–6) is your swatch. Measure it before you start the leg.
Checkpoints:
- After Row 1: 25 sc, 4.2 in (10.7 cm) wide.
- After Row 6: the foot is 4.2 in (10.7 cm) x 1.3 in (3.3 cm).
- After Row 18: the leg is 3.2 in (8.1 cm) wide, and the body is 4.3 in (10.9 cm) tall.
- After Row 24: the cuff is 4.2 in (10.7 cm) wide, and the body is 5.4 in (13.7 cm) tall.
- After the edging: 4.8 in x 5.7 in (12.2 cm x 14.5 cm).
If the foot is too big, change to a 2.5 mm hook. If it’s too small, change to a 3.0 mm hook. If the fans cup, your arches are too tight. If the fans gape, your arches are too loose. Correct the arch tension before changing hooks.

Stocking Body
Work in turned rows. The foundation tail marks the toe end, and the other end is the heel.
There are two kinds of arch row:
- Arch A rows have a sc at each edge.
- Arch B rows have ch-2 half arches at each edge. The next fan row then starts and ends with half fans, which shifts the fans half a step.
Foot (lavender)
Foundation: Ch 26.
Row 1 (sole): Sc in 2nd ch from hook and in each ch across, turn. (25 sc)
Row 2 (Arch A): Ch 1, sc in first sc, ch 5, sk 5 sc, sc in next sc; rep from * 3 more times, turn. (5 sc, 4 ch-5 arches)*
Row 3 (Fan A): Ch 1, sc in first sc, fan in next ch-5 sp, sc in next sc; rep from * 3 more times, turn. (4 fans = 28 dc, 5 sc)*
Row 4 (Arch B): Ch 5 (counts as dc + ch 2), sc in 4th dc of first fan, ch 5, sc in 4th dc of next fan; rep from * 2 more times, ch 2, dc in last sc, turn. (4 sc, 3 ch-5 arches, 2 ch-2 edge sps, 2 dc)*
Row 5 (Fan B): Ch 3 (counts as dc), 3 dc in first ch-2 sp, sc in next sc, fan in next ch-5 sp, sc in next sc; rep from * 2 more times, 3 dc in tch sp, dc in 3rd ch of tch, turn. (3 fans + 2 half fans = 29 dc, 4 sc)*
Row 6 (Arch A): Ch 1, sc in first dc, ch 5, sc in 4th dc of next full fan; rep from * 2 more times, ch 5, sc in top of tch, turn. (5 sc, 4 ch-5 arches)*
Row 6 ends at the heel. The foot should measure 4.2 in x 1.3 in (10.7 cm x 3.3 cm).
Leg (lavender)
Row 7 (Fan A): Ch 1, sc in first sc, fan in next ch-5 sp, sc in next sc; rep from * 2 more times, turn. Leave the last arch and last sc at the toe end unworked. (3 fans = 21 dc, 4 sc)*
Row 8 (Arch B): Ch 5 (counts as dc + ch 2), sc in 4th dc of first fan, ch 5, sc in 4th dc of next fan; rep from * once more, ch 2, dc in last sc, turn. (3 sc, 2 ch-5 arches, 2 ch-2 edge sps, 2 dc)*
Row 9 (Fan B): Ch 3, 3 dc in first ch-2 sp, sc in next sc, fan in next ch-5 sp, sc in next sc; rep from * once more, 3 dc in tch sp, dc in 3rd ch of tch, turn. (2 fans + 2 half fans = 22 dc, 3 sc)*
Row 10 (Arch A): Ch 1, sc in first dc, ch 5, sc in 4th dc of next full fan; rep from * once more, ch 5, sc in top of tch, turn. (4 sc, 3 ch-5 arches)*
Row 11 (Fan A): Ch 1, sc in first sc, fan in next ch-5 sp, sc in next sc; rep from * 2 more times, turn. (3 fans, 4 sc)*
Rows 12–14: Rep Rows 8–10.
Rows 15–18: Rep Rows 11, 8, 9 and 10, in that order. Row 18 ends with (4 sc, 3 ch-5 arches) at the heel edge.
Fasten off. The leg should be 3.2 in (8.1 cm) wide, and the body 4.3 in (10.9 cm) tall.
Cuff (cream)
Turn the work. Join cream with a sl st in the last sc of Row 18.
Row 19 (conversion): Ch 1, sc in same sc, 7 sc in next ch-5 sp, sc in next sc; rep from * 2 more times, turn. (4 sc worked into sc + 15 sc for the arch chains, plus 6 extra = 25 sc)*
The 6 extra stitches (2 per arch) make the cuff slightly wider than the edged leg.
Rows 20–23: Ch 1, sc in each sc across, turn. (25 sc)
Row 24 (picot top): Ch 1, sc in first sc, picot, sc in next 4 sc, picot; rep from * 5 more times. (25 sc, 7 picots)* This row ends at the heel-side corner. Fasten off.
The cuff is 0.8 in (2.0 cm) of solid sc plus 0.25 in (0.6 cm) of picots. The body is now 5.4 in (13.7 cm) tall.
Toe and Heel Ovals (make 2, cream)
Rnd 1: Ch 7, sc in 2nd ch from hook and in next 4 ch, 3 sc in last ch. Working along the other side of the chain, sc in next 4 ch, 2 sc in the first ch. Sl st to first sc. (14 sc)
Rnd 2: Ch 1, 2 sc in first sc, sc in next 4 sc, 2 sc in each of next 3 sc, sc in next 4 sc, 2 sc in each of last 2 sc. Sl st to first sc. (20 sc)
Fasten off, leaving a 12 in (30.5 cm) tail. Each oval should measure 1.3 in x 0.7 in (3.3 cm x 1.8 cm).
Edging (Lavender Picot Border)
Lay the stocking with the toe pointing left. This side is the RS. The edging runs around the lace only. The cuff sides stay plain.
Border gauge: 6 sc per 1 in (2.5 cm). Work 2 sc per fan-row end and 1 sc per arch-row end.
Edging Row 1: Join lavender with a standing sc in the end of Row 18 on the front (left) edge, just under the cuff. Then work each section in turn:
- Front leg (Rows 18–7): 18 sc, including the standing sc (6 arch rows x 1 + 6 fan rows x 2).
- Instep: 5 sc in the unworked ch-5 arch of Row 6. Add no stitches at the inner corner.
- Upper toe corner: 2 sc in the end sc of Row 6.
- Toe edge (Rows 5–2): 6 sc (2 fan rows x 2 + 2 arch rows x 1).
- Lower toe corner: 3 sc in the first foundation ch.
- Sole: sc in the unused loops of the next 23 ch.
- Heel corner: 3 sc in the last foundation ch.
- Heel edge (Rows 2–18): 25 sc (9 arch rows x 1 + 8 fan rows x 2), ending under the cuff.
Turn. (18 + 5 + 2 + 6 + 3 + 23 + 3 + 25 = 85 sc)
Edging Row 2: Ch 1, sc in first 2 sc, picot, sc in next 3 sc; rep from * 26 more times, picot, sc in last 2 sc. (85 sc, 28 picots)* Fasten off.
Why the math works: Every edge is worked at the same 6 sc per inch as the body, so each section lies flat.
- Front leg: 3 lace repeats, 3.0 in (7.6 cm) tall, so 18 sc.
- Heel edge: 4.2 in (10.7 cm) tall, so 25 sc.
- Sole: 25 foundation chains, so 23 sc plus one corner chain at each end. The 2 extra sc in each corner turn the bend without cupping.
- Picots: 2 + (27 x 3) + 2 = 85, so the picots are spaced evenly from end to end.
Hanging Loop and Finishing
Loop:
- Join lavender with a sl st in the last sc of Row 24, at the heel-side top corner.
- Ch 24, then sl st in the same sc.
- Sl st in each ch around the loop (24 sl st), then sl st in the base sc.
- Fasten off. The loop stands about 1.75 in (4.4 cm) tall.
Ovals: Pin one oval over the lower toe, tilted about 30 degrees to follow the curve. Pin the other over the heel, tilted the opposite way. Whipstitch each oval through its outer loops, catching the lace beneath. Weave in all ends through solid stitches.
Final Blocking
- Soak the ornament for 5 minutes, then roll it in a towel to remove water.
- Lay it RS up with the toe pointing left.
- Pin the width to 4.8 in (12.2 cm) and the height to 5.7 in (14.5 cm).
- Open each fan into an even half circle.
- Pin each picot pointing outward.
- Square the cuff at 4.2 in (10.7 cm) wide.
- Pin the loop straight up.
- Dry completely. Add light spray starch if you want a stiffer ornament.
Final Quality-Control Checklist
- [ ] The foot is 4 fans wide and the leg is 3 fans wide.
- [ ] Each fan row is offset by half a fan.
- [ ] Full fans have 7 dc and half fans have 4 dc.
- [ ] The cuff has 25 sc and 7 picots.
- [ ] The edging has 85 sc and 28 picots, and the cuff sides are plain.
- [ ] Each oval has 20 sc and lies flat.
- [ ] The loop is firm and sits at the heel-side corner.
- [ ] The ornament measures 4.8 in x 5.7 in (12.2 cm x 14.5 cm).
Troubleshooting
- Fans stack instead of offsetting: Arch B rows must start with ch 5 and end with ch 2, dc.
- Leg sits over the toe: Row 7 must start at the heel end, opposite the foundation tail.
- Cuff ruffles: Work Rows 19–24 with a 2.5 mm hook.
- Edging cups: You have too few stitches. Recount each section.
- Edging ruffles: You have too many stitches, usually at the instep corner.
- Oval curls: Steam it flat before sewing, and confirm Rnd 2 has 20 sc.
Care
Hand wash in cool water with mild soap and dry flat, pinning the stocking back into shape. Store it flat so the picots don’t crush.

Final Notes
Here is the measurement chain:
- A 25 sc foundation gives a 4.2 in (10.7 cm) foot.
- Three fans give a 3.2 in (8.1 cm) leg.
- The 25 sc cuff brings the body to 5.4 in (13.7 cm) tall.
- An 85 sc picot edging finishes the ornament at 4.8 in x 5.7 in (12.2 cm x 14.5 cm).
Check the foot, keep 6 sc to the inch on every edge, and the rest will fall into place.
Happy crocheting!