Peach Seashell Strip Door Curtain Crochet Pattern

This door curtain is made from six long shell-stitch strips in soft peach and warm cream. Each row of fans switches color, so the strips look like stacked seashells from top to bottom. Hung side by side on a rod, they make a light, airy curtain you can walk straight through.

The strips are not joined to each other. Each one has its own hanging loop, so the curtain moves freely, parts easily by hand and can be washed one strip at a time. Three strips get a peach border and three get a cream border, and they alternate across the rod.

This pattern uses US crochet terms. Each finished strip measures 5 in wide x 75 in long (12.7 x 190.5 cm), plus a hanging loop that adds about 1.5 in (3.8 cm). Six strips with small gaps between them span about 32.5 in (82.6 cm).

How it’s made: you work each strip flat in rows of 7-dc shells and change color every row. You finish with one leveling row, then add a single crochet border, a slip-stitch finishing round and a hanging loop.

Finished Size and Construction

  • Finished strip size: 5 in x 75 in (12.7 x 190.5 cm), loop not included
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (weight 4)
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 6 strips
  • Layout: 6 strips hung side by side, not joined, with alternating border colors
  • Strip body size before border: 4.5 in x 74.5 in (11.4 x 189.2 cm)
  • Border depth: 0.25 in (0.6 cm) on every side
  • Hanging loop: about 1.5 in (3.8 cm) tall; fits a rod up to 1 in (2.5 cm) thick
  • Curtain span: about 32.5 in (82.6 cm) with 0.5 in (1.3 cm) gaps

Materials

Choose a smooth worsted cotton or cotton blend. Cotton holds the shell shape, hangs straight under its own weight and stretches less than acrylic over a long drop. Pick two colors with clear contrast so each fan row stands out.

  • Color 1 – Peach: about 600 g, approx. 1,200 m (1,312 yd)
  • Color 2 – Cream: about 600 g, approx. 1,200 m (1,312 yd)

On all six strips, each color is used for 50 rows. Each color also makes the borders and loops of three strips. These quantities include about a 10% margin for swatching and for the many short tails you get from changing color every row.

Tools:

  • 5.0 mm (H-8) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch markers
  • Tape measure
  • Blocking mats and rust-proof pins
  • Curtain rod, at least 36 in (91.4 cm) long and no thicker than 1 in (2.5 cm)

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • st(s) – stitch(es)
  • rep – repeat
  • RS – right side

Special stitches:

  • Shell: 7 dc worked into the same stitch.
  • Half shell: 4 dc worked into the same stitch. At the start of a row, the ch 3 counts as the first dc, followed by 3 dc.

Gauge and Checkpoints

Test one piece first. The first 8 rows of Strip 1 are your gauge swatch, so you don’t waste yarn.

Gauge: 2 shell repeats (17 sts) = 4.5 in (11.4 cm) wide. 4 shell rows = 3 in (7.6 cm) tall, so each shell row is 0.75 in (1.9 cm). Border gauge: 16 sc = 4 in (10.2 cm), or 4 sc per inch.

Checkpoints:

  • After Row 8: 4.5 in x 6 in (11.4 x 15.2 cm)
  • After Row 40: 30 in (76.2 cm) long
  • After Row 80: 60 in (152.4 cm) long
  • After Row 99: 74.25 in (188.6 cm) long
  • After Row 100 (leveling row): 74.5 in (189.2 cm) long
  • After the border: 5 in x 75 in (12.7 x 190.5 cm)

Lay the piece flat and measure lightly, without stretching. A long strip gets a little longer when it hangs, so the flat measurement is the one that counts.

If your swatch is too big, go down to a 4.5 mm hook. If it is too small, go up to a 5.5 mm hook. If only the height is off, add or remove rows in pairs (one Color A row and one Color B row), so the row count before the leveling row stays odd.

Detailed shot of alternating cream and coral crocheted lace with dimensional fan stitches and shadows.

Strip Pattern

Each strip uses a Color A and a Color B:

  • Peach-bordered strip: Color A = peach, Color B = cream, border = peach
  • Cream-bordered strip: Color A = cream, Color B = peach, border = cream

Work odd rows in Color A and even rows in Color B. Fasten off at the end of every row, leaving 4 in (10.2 cm) tails. You will hide these tails inside the border later, so don’t weave them in yet.

Foundation: With Color A, ch 18.

Row 1 (Color A, full shells): Sc in 2nd ch from hook, *sk 3 ch, shell in next ch, sk 3 ch, sc in next ch; rep from * once more. Fasten off. (17 sts: 3 sc and 2 shells)

Check: 1 sc + 2 x (3 skipped + 1 shell + 3 skipped + 1 sc) = 17 chains used.

Row 2 (Color B, half shells at edges): Turn. Join Color B in the last sc of Row 1. Ch 3 (counts as dc), 3 dc in same sc (half shell made), sk 3 dc, sc in center (4th) dc of shell, sk 3 dc, shell in next sc, sk 3 dc, sc in center dc of next shell, sk 3 dc, 4 dc in last sc (half shell made). Fasten off. (17 sts: half shell, sc, shell, sc, half shell = 4 + 1 + 7 + 1 + 4)

Row 3 (Color A, full shells): Turn. Join Color A in the last dc of Row 2. Ch 1, sc in same dc, sk 3 dc, shell in next sc, sk 3 dc, sc in center dc of shell, sk 3 dc, shell in next sc, sk 3 dc, sc in top of ch-3. Fasten off. (17 sts: 3 sc and 2 shells)

Each new row of shells now sits in the dips of the row below. That gives the staggered fan look: two full fans in odd rows, and one full fan between two half fans in even rows.

Rows 4–99: Rep Rows 2 and 3, alternating colors. Work even rows in Color B following Row 2, and odd rows in Color A following Row 3. Row 99 is a Color A full-shell row. (17 sts in every row)

Row 99 checkpoint: 74.25 in (188.6 cm). You now have 50 rows in Color A and 49 rows in Color B.

Row 100 (Color B, leveling row): Turn. Join Color B in the last sc of Row 99. Ch 3 (counts as dc), *hdc in next dc, sc in next 5 dc, hdc in next dc, dc in next sc; rep from * once more. Fasten off. (17 sts: 3 dc, 4 hdc, 10 sc)

The dc stitches fill the low points above each sc, and the sc stitches sit on the shell tops, so the top edge comes out flat. This row adds about 0.25 in (0.6 cm). Body checkpoint: 4.5 in x 74.5 in (11.4 x 189.2 cm), with 50 rows in each color.

Make All Pieces

Make 6 strips in total:

  • 3 peach-bordered strips: Color A peach, Color B cream, peach border and loop
  • 3 cream-bordered strips: Color A cream, Color B peach, cream border and loop

For each strip, Color A covers 50 rows plus the border and loop (about 95 g). Color B covers 50 rows (about 85 g). Across all six strips, each color totals about 540 g before the margin.

Layout (left to right on the rod):

| P | C | P | C | P | C |

P = peach-bordered strip, C = cream-bordered strip. All six strips hang with Row 1 at the bottom and the leveling row at the top.

Joining (Hanging the Strips)

The strips are not sewn or crocheted together. Each strip hangs from its own loop, which keeps the curtain flexible and easy to walk through.

Slide the strips onto the rod in P-C-P-C-P-C order. Space them about 0.5 in (1.3 cm) apart, measured edge to edge. Six strips at 5 in (12.7 cm) plus five gaps at 0.5 in (1.3 cm) gives a total width of 32.5 in (82.6 cm).

Make every loop with the same tension so all the strips hang at the same height. If one strip sits lower, check its loop chain count first, then its row count.

Size checkpoint: The total drop from the top of the rod to the bottom edge is about 76.5 in (194.3 cm). That is 75 in (190.5 cm) of strip plus about 1.5 in (3.8 cm) of loop. Mount the rod high enough that the bottom edges clear the floor.

Border

Work the border in the strip’s border color. Border gauge is 16 sc = 4 in (10.2 cm). Along the sides, work over the row tails so they end up hidden inside the sc stitches.

Round 1 (sc conversion round): With RS facing, join the border color in the first st of Row 100 (top right corner).

  • Top edge: 3 sc in first st, sc in next 15 sts, 3 sc in last st.
  • Left side: Work 1 sc in the end of Row 100. Then work 3 sc in the end of each shell row from Row 99 down to Row 1, working around the edge dc or into the edge sc. (298 sc)
  • Bottom edge: Working into the foundation chain, 3 sc in first ch, sc in next 15 ch, 3 sc in last ch.
  • Right side: 3 sc in the end of each shell row from Row 1 up to Row 99, then 1 sc in the end of Row 100. (298 sc)
  • Sl st to first sc. Do not fasten off.

Round 1 total: (34 sc worked 1 per existing st along the top and bottom) + (8 extra corner sc) + (596 sc worked into row ends, 2 x (99 x 3 + 1)) = 638 sts.

Counts per side, including the 2 corner sts (the center sc of each 3-sc group): top 19, bottom 19, each long side 302. Check: 19 + 19 + 302 + 302 = 642. Each corner is counted on two sides, so subtract 4: 642 − 4 = 638.

Round 2 (sl st finishing round): Sl st in each sc around, keeping the slip stitches loose. (638 sl sts) Join and fasten off. This round adds no width or length. It gives the crisp, braided-looking edge.

Hanging loop: Find the 10th of the 19 sc across the top edge (the center st) and join the border color there. Ch 14, sl st in the same sc. Work 20 sc into the ch-14 space, then sl st in the same base sc. Fasten off, leaving a 6 in (15.2 cm) tail. Use the tail to sew the base of the loop firmly to the border on the wrong side.

Why the math works: Each shell row is 0.75 in (1.9 cm) tall, and 3 sc at 4 sc per inch also measure 0.75 in (1.9 cm). The leveling row is 0.25 in (0.6 cm), matched by 1 sc. So 99 x 3 + 1 = 298 sc covers exactly 74.5 in (189.2 cm), the height of the body. Across the top and bottom, each sc goes into one body st, so those edges can’t ruffle or pull in. The border adds 0.25 in (0.6 cm) on each side, bringing 4.5 x 74.5 in (11.4 x 189.2 cm) up to 5 x 75 in (12.7 x 190.5 cm).

Final Blocking

  1. Trim the row tails close to the border, leaving about 0.25 in (0.6 cm) hidden inside the stitches.
  2. Weave in the remaining foundation, border and loop tails.
  3. Soak the strip in cool water and gently squeeze out the extra water. Do not wring it.
  4. Roll the strip in a towel to remove more water.
  5. Lay it flat on blocking mats and pin it to 5 in x 75 in (12.7 x 190.5 cm). Work in sections if your mats are shorter than the strip.
  6. Gently open each fan with your fingers so the shells spread evenly.
  7. Pin the long sides straight, checking the width every 12 in (30.5 cm).
  8. Let it dry completely before hanging.
  9. Block all six strips to the same measurements so they hang evenly.

Final Quality-Control Checklist

  • Every strip measures 5 x 75 in (12.7 x 190.5 cm) laid flat.
  • Every row has 17 sts, and no shell is missing a dc.
  • Colors alternate every row, with 50 rows of each color per strip.
  • Fans stagger correctly: two full fans, then one full fan between two half fans.
  • Each long side has 298 sc between its corner groups.
  • The top and bottom edges are flat, not wavy.
  • All row tails are hidden inside the border.
  • Loops are centered, the same size and securely sewn.
  • Strips alternate P-C-P-C-P-C on the rod.

Troubleshooting

Shells look crowded or curl: Your dc are too tight. Go up a hook size or loosen your yarn-overs.

Strip gets narrower as you go: You are probably missing the last stitch of the row (the top of the ch-3 or the final sc). Mark the first and last sts of each row.

Side border ruffles: Your border is looser than 4 sc per inch. Work 2 sc instead of 3 in each Color B row end, or go down a hook size for the border only.

Side border pulls the strip short: Your border is tighter than gauge. Keep 3 sc per shell row and relax your tension.

Strips hang at different lengths: Compare row counts first, then re-block the strip that is too long or too short.

Tails poke out: Use a needle to thread them back through a few border sts on the wrong side.

Care

Hand wash in cool water, or machine wash on a gentle cycle in a mesh bag, one or two strips at a time. Lay flat to dry and reshape to 5 x 75 in (12.7 x 190.5 cm).

Coral and cream striped crochet curtains with fan stitch pattern hanging on a wooden rod in a bright, neutral room.

Final Notes

The whole curtain depends on one chain of measurements. Each shell row is 0.75 in (1.9 cm), so 99 rows plus the leveling row make a body of 4.5 x 74.5 in (11.4 x 189.2 cm). A 0.25 in (0.6 cm) border with 298 sc per long side brings each strip to 5 x 75 in (12.7 x 190.5 cm). Six strips with 0.5 in (1.3 cm) gaps span 32.5 in (82.6 cm). The loops add about 1.5 in (3.8 cm), for a total drop of about 76.5 in (194.3 cm).

Check your gauge on the first 8 rows and keep every row at 17 sts, and your strips will hang straight and match.

Happy crocheting!

Leave a Comment