This hanging holder has two oval baskets, one above the other, on two flat straps that loop over a towel rod. Each basket holds two standard rolls side by side, so the holder keeps four spare rolls off the floor.
The baskets are sage green with a raised grid texture. Front post double crochet columns and front-loop ridge lines form the grid, and a cream slip-stitch line on each grid line makes it stand out. A cream rim with a twisted reverse single crochet edge finishes each basket. The style is soft, modern and calm, and it suits a bathroom with natural wood and plants.
The pattern uses US crochet terms. Each finished basket is 10.5 in (26.7 cm) long, 5 in (12.7 cm) wide and 3.6 in (9.1 cm) tall from the base crease to the top of the rim. The assembled holder hangs about 21 in (53.3 cm) from the top of the strap loops to the bottom of the lower basket.
Construction is simple. Each basket is one continuous piece: an oval base, then the walls worked straight up, then the cream rim. The two straps are worked flat in rows. You sew the straps to the back wall of each basket, then fold and sew a loop at the top of each strap to go over the rod.
Finished Size and Construction
- Finished size (one basket): 10.5 in (26.7 cm) long × 5 in (12.7 cm) wide × 3.6 in (9.1 cm) tall
- Assembled hanging length: about 21 in (53.3 cm)
- Skill level: Intermediate (post stitches, oval increases, surface slip stitch)
- Terminology: US
- Yarn weight: Bulky (#5) cotton or cotton blend
- Hook: 6.0 mm (US J-10)
- Number of pieces: 4 (2 baskets, 2 straps)
- Layout: 2 baskets stacked vertically on 2 parallel straps
- Base size: 10.5 in × 5 in (26.7 cm × 12.7 cm), 80 stitches around
- Wall height before rim: 2.8 in (7.1 cm), 9 rounds
- Rim depth: 0.8 in (2.0 cm), 3 rounds
- Strap size: 1.7 in × 24 in (4.3 cm × 61.0 cm) before folding
Materials
Choose a firm, smooth bulky cotton or cotton blend so the walls hold their shape. Soft acrylic will work, but the baskets will sag more. The amounts below assume about 110 m per 100 g.
- Sage green (MC): 250 g / 275 m
- Cream (CC): 60 g / 66 m
These quantities include about a 20% margin for gauge differences and swatching.
Tools:
– 6.0 mm (US J-10) crochet hook
– Tapestry needle
– 8 stitch markers
– Tape measure
– Rust-proof pins and a spray bottle for blocking
– Scissors
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- dc – double crochet
- sl st – slip stitch
- st(s) – stitch(es)
- BLO – back loop only
- FLO – front loop only
- FPdc – front post double crochet
- rev sc – reverse single crochet (crab stitch)
- MC / CC – main color / contrast color
FPdc: Yarn over, insert the hook from front to back to front around the post of the stitch named, yarn over and pull up a loop, [yarn over, pull through 2 loops] twice. Always skip the stitch hidden behind the FPdc.
Rev sc: Working from left to right (right-handers), insert the hook into the next stitch to the right, pull up a loop, yarn over and pull through both loops.
Surface sl st: Hold the yarn behind the fabric. Insert the hook from front to back through the fabric, pull up a loop, then pull it through the loop on the hook.
Gauge and Checkpoints
Gauge: 12 sc × 13 rounds = 4 in (10.2 cm) in sc.
Make one full basket before you start the second one or the straps. Check it at each stage:
- After base Round 4 (56 sts): about 8.2 in × 2.5 in (20.8 cm × 6.4 cm).
- After base Round 8 (80 sts): 10.5 in × 5 in (26.7 cm × 12.7 cm). The base should lie completely flat.
- After Wall Round 9: walls 2.8 in (7.1 cm) tall, with straight, not flaring, sides.
- After the rim: total height 3.6 in (9.1 cm).
If your base is too big or it ripples, go down one hook size. If it is too small or cups, go up one hook size. Test-fit two rolls before you start the walls. They should sit side by side with about 0.25 in (0.6 cm) of room on every side.

Basket (Make 2)
Base
With MC, ch 19.
Round 1: 3 sc in 2nd ch from hook, sc in next 16 ch, 3 sc in last ch. Rotate and work along the other side of the chain: sc in next 16 ch. Join with sl st to first sc. (38 sts: 3 per end, 16 per side)
From here on, start each round with ch 1 (it does not count as a stitch) and end it with a sl st to the first sc. Mark the first stitch of each end group.
Round 2: [2 sc in each of next 3 sts, sc in next 16] twice. (44 sts)
Round 3: [(sc in next st, 2 sc in next st) 3 times, sc in next 16] twice. (50 sts)
Round 4: [(sc in next 2 sts, 2 sc in next st) 3 times, sc in next 16] twice. (56 sts)
Round 5: [(sc in next 3 sts, 2 sc in next st) 3 times, sc in next 16] twice. (62 sts)
Round 6: [(sc in next 4 sts, 2 sc in next st) 3 times, sc in next 16] twice. (68 sts)
Round 7: [(sc in next 5 sts, 2 sc in next st) 3 times, sc in next 16] twice. (74 sts)
Round 8: [(sc in next 6 sts, 2 sc in next st) 3 times, sc in next 16] twice. (80 sts: 24 per end, 16 per side)
Each round adds 6 sts, 3 at each end. The two rounded ends together make one full circle, and +6 per round is the standard rate for a flat sc circle. Number the Round 8 sts 1–80. Sts 1–24 are End A, 25–40 are the front, 41–64 are End B and 65–80 are the back.
Walls
Stay with MC. Do not increase from here on.
Wall Round 1: Sc in BLO of each st. (80 sts) This turns the walls upward and leaves a line of front loops at the base edge.
Wall Round 2: [FPdc around next st of Wall Round 1, sc in next 3] 20 times. (80 sts: 20 FPdc + 60 sc)
Wall Round 3: Sc in each st. (80 sts)
Wall Round 4: [FPdc around FPdc 2 rounds below, sc in next 3] 20 times. (80 sts)
Wall Round 5: Sc in BLO of each st. (80 sts) This leaves the second horizontal line of front loops.
Wall Round 6: Repeat Wall Round 4. (80 sts)
Wall Round 7: Sc in each st. (80 sts)
Wall Round 8: Repeat Wall Round 4. (80 sts)
Wall Round 9: Sc in BLO of each st. (80 sts) This leaves the third horizontal line. Fasten off MC.
The FPdc columns sit on sts 1, 5, 9 and so on up to 77, so there are 20 columns. The front and the back each have 4 columns: sts 25, 29, 33 and 37 on the front, and 65, 69, 73 and 77 on the back. Each grid square is 4 sts × 4 rounds, about 1.3 in × 1.2 in (3.3 cm × 3.0 cm).
Make All Pieces
Strap (Make 2)
With MC, ch 6.
Row 1: Sc in 2nd ch from hook and in each ch across. (5 sts)
Rows 2–78: Ch 1, turn, sc in each st across. (5 sts)
Fasten off and leave a 24 in (61.0 cm) tail. The strap measures 1.7 in × 24 in (4.3 cm × 61.0 cm).
Piece totals:
– MC: 2 basket bodies (base and walls) + 2 straps
– CC: 2 rims + the grid highlights on both baskets
Layout (viewed from the front):
[Strap L]=====ROD=====[Strap R]
| |
+-----------------------------+
| UPPER BASKET (2 rolls) |
+-----------------------------+
| | gap 6.2 in (15.7 cm)
+-----------------------------+
| LOWER BASKET (2 rolls) |
+-----------------------------+
Joining
Method: Whipstitch with the MC tail through both layers.
Strap row map (counted from Row 1 at the bottom):
– Rows 1–12: sewn to the back of the lower basket, 3.7 in (9.4 cm)
– Rows 13–32: free gap, 6.2 in (15.7 cm)
– Rows 33–44: sewn to the back of the upper basket, 3.7 in (9.4 cm)
– Rows 45–58: drop to the rod, 4.3 in (10.9 cm)
– Rows 59–78: rod loop, 6.2 in (15.7 cm)
Stitch-to-stitch logic: From the base crease to the top of the rim, the wall has 12 rounds: 9 wall rounds plus 3 rim rounds. The strap section has 12 rows. Match 1 strap row to 1 wall round. The strap is 5 sts wide and covers exactly 5 wall sts.
Placement: On the back side, sew the left strap over sts 65–69 and the right strap over sts 76–80. Each strap’s outer edge then lines up with the point where the end curve begins. The strap centers are 11 sts apart, about 3.7 in (9.4 cm).
- Pin strap Row 1 level with the bottom horizontal line of the lower basket and Row 12 level with the top of the rim.
- Whipstitch both long edges, plus the top and bottom edges, through the wall sts underneath.
- Repeat on the upper basket with Rows 33–44.
- For the rod loop, fold Rows 69–78 to the back. Sew Row 78 straight across the back of the strap at Row 58, then whipstitch the side edges of the overlap. The loop fits rods up to 1.75 in (4.4 cm) across. If your rod has fixed ends, wrap the loop around the rod before you sew it.
Tension: Pull each whipstitch snug but not tight. Tight stitches pucker the wall and stop the basket sitting level.
Size checkpoint: Lay the joined holder flat. The distance from the top of the loop fold to the bottom of the lower basket should be about 21 in (53.3 cm). Both baskets should hang level.
Border (Rim and Grid Highlights)
Border gauge: Same as the body, 12 sts = 4 in (10.2 cm).
Join CC in any st of Wall Round 9.
Rim Round 1: Ch 1, sc in each st. Join. (80 sts: front 16, End B 24, back 16, End A 24)
Rim Round 2: Ch 1, sc in each st. Join. (80 sts: 16 / 24 / 16 / 24)
Rim Round 3: Ch 1, rev sc in each st. Join. (80 sts: 16 / 24 / 16 / 24) Fasten off.
Why the math works: The walls rise straight up from the 80-st base, so every rim round keeps 80 sts: 16 + 24 + 16 + 24. Working rev sc one per stitch gives the twisted rope edge without flaring or pulling in.
Horizontal highlights: With CC, sl st in each unused front loop of each of the 3 horizontal lines. That is 80 sl sts per line and 240 per basket. Keep the tension even so the line lies flat.
Vertical highlights: With CC, work surface sl sts up the center of each FPdc column, one per round from Wall Round 1 to Wall Round 8. That is 8 sl sts per column, 20 columns, and 160 sl sts per basket.
Final Blocking
- Weave in all ends inside the basket walls, before joining if you can.
- Spray each basket until it is damp but not soaked.
- Pack each basket with two rolls wrapped in a plastic bag, or a towel shaped to 10.5 in × 5 in (26.7 cm × 12.7 cm).
- Press the walls upright and smooth the rim level.
- Pin the straps flat to 1.7 in (4.3 cm) wide and spray them.
- Let everything dry completely, usually 24 hours.
Final Quality-Control Checklist
- Each base is 80 sts and 10.5 in × 5 in (26.7 cm × 12.7 cm).
- Each basket has 20 continuous FPdc columns.
- There are 3 cream horizontal lines and 20 cream vertical lines per basket.
- Each rim is 3 rounds of 80 sts.
- Each strap is 78 rows of 5 sts.
- Strap rows match the wall rounds 1:1 at both baskets.
- The baskets hang level, with a 6.2 in (15.7 cm) gap between them.
- All ends are secure and hidden.
Troubleshooting
- Base ruffles: You may have added extra increases. Recount to 6 per round, or go down a hook size.
- Base cups: Your tension is too tight. Go up a hook size.
- Columns lean: You are not skipping the st behind each FPdc. Check for exactly 80 sts.
- Walls flare: Your sc is loose. Go down a hook size for the walls only.
- Rim waves: Your rev sc is too loose. Shorten the pulled-up loops.
- Basket tips forward: The strap is sewn too low. Make sure Row 12 (or Row 44) reaches the top of the rim.
Care
Hand wash in cool water and reshape while damp. Dry flat with the baskets stuffed so they keep their shape.

Final Notes
The measurement chain runs like this:
- Gauge is 12 sc × 13 rounds = 4 in (10.2 cm).
- That gauge gives an 80-st base of 10.5 in × 5 in (26.7 cm × 12.7 cm).
- Nine wall rounds make 2.8 in (7.1 cm), and the 0.8 in (2.0 cm) rim brings each basket to 3.6 in (9.1 cm).
- The 78-row straps are 24 in (61.0 cm) long and hold the baskets with a 6.2 in (15.7 cm) gap.
- The finished holder hangs about 21 in (53.3 cm).
Check each link in that chain as you go and the finished holder will fit together neatly.
Happy crocheting!