Olive Grove Bag Holder and Towel Ring Crochet Pattern

This two-piece set brings a quiet Mediterranean feel to a kitchen or bathroom. The bag holder is a tall, vase-shaped tube of open diamond lattice with flared shell ruffles at both ends. The towel ring is a plump padded ring with a small fan on top.

The palette is simple. Soft cream is the main fabric. Olive green is used for the leaves, bow and scalloped ruffle edges, and a lighter olive green for the round olives. A long olive branch runs down the front of the holder, and a small leaf-and-olive spray sits at the top of the ring.

The pattern uses US crochet terms. Measured flat, the bag holder body is 15 in (38.1 cm) long and 6.5 in (16.5 cm) wide at its widest point. With both ruffles it is about 18 in (45.7 cm) long. The towel ring is about 5.5 in (14.0 cm) across.

The holder body is worked bottom-up in joined rounds. It has a solid band, then a chain-mesh lattice shaped by changing the chain length, then a second solid band. The ruffles, leaves, olives, stems and bow are made separately and sewn on. The ring cover is a flat strip wrapped around a padded hardware ring.

Finished Size and Construction

  • Bag holder body (flat): 15 in (38.1 cm) long. It is 5 in (12.7 cm) wide at the bottom, 6.5 in (16.5 cm) at the widest and 4.5 in (11.4 cm) at the top.
  • Bag holder with ruffles: about 18 in (45.7 cm) long, plus a 3 in (7.6 cm) loop
  • Towel ring: 5.5 in (14.0 cm) outer diameter, 4 in (10.2 cm) opening, with a tube 0.8 in (2.0 cm) thick
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 2 finished pieces (holder and ring), each assembled from smaller components
  • Layout: The branch runs down the center front of the holder. The leaf spray is centered at the top of the ring.
  • Size before ruffles: 15 in (38.1 cm) body
  • Ruffle (border) depth: 1.5 in (3.8 cm)

Materials

Choose a smooth worsted cotton at about 85 m per 50 g. Cotton holds the lattice open, washes well and resists stretching under the weight of bags or a damp towel.

  • Cream: 150 g, about 255 m (body, ruffles, ring cover, fan and loops)
  • Olive green: 50 g, about 85 m (leaves, stems, bow and ruffle edges)
  • Light olive green: 15 g, about 26 m (olives)

These quantities include a margin of about 15 percent.

Tools:

  • 4.0 mm (US G-6) hook
  • 5 in (12.7 cm) wooden or metal macramé ring
  • Cotton batting strip, 1 in (2.5 cm) wide and about 60 in (152.4 cm) long
  • Small amount of fiberfill
  • Tapestry needle, stitch markers, scissors, tape measure and rustproof pins

Abbreviations (US Terms)

  • ch chain
  • sl st slip stitch
  • sc single crochet
  • hdc half double crochet
  • dc double crochet
  • sc2tog single crochet 2 together
  • BLO back loop only
  • sk skip
  • st(s) stitch(es)
  • rnd(s) round(s)

Special stitch – Net round (ch-X):
1. Sl st along the chains of the first loop to its center: 3 sl st in a ch-5 or ch-6 loop, or 4 sl st in a ch-7 loop.
2. Ch 1 and sc in the same loop.
3. Ch X, sc in next loop 9 times.
4. Ch X and join with a sl st to the first sc.

Result: 10 loops.

Gauge and Checkpoints

Gauge: 16 sc and 16 rnds = 4 in (10.2 cm) in sc.

Before starting the full holder, work only the bottom band (Rnds 1–6) as a test piece. It should lie flat at 5 in (12.7 cm) wide and 1.5 in (3.8 cm) tall. Each net round adds about 0.4 in (1.0 cm) of height.

Holder checkpoints (measured flat):

  • After Rnd 6: 1.5 in (3.8 cm) tall
  • After Rnd 14: 4.75 in (12.1 cm) tall
  • After Rnd 28: 10.25 in (26.0 cm) tall and 6.5 in (16.5 cm) wide
  • After Rnd 36: 13.5 in (34.3 cm) tall
  • After Rnd 42: 15 in (38.1 cm) tall and 4.5 in (11.4 cm) wide at the top

If your measurements are off:
– Band wider than 5 in (12.7 cm): drop 0.5 mm in hook size.
– Band narrower than 5 in (12.7 cm): go up 0.5 mm.
– Lattice alone runs long: chain more snugly.
– Lattice alone runs short: relax your chains.

Crocheted olive branch with stitched green leaves and round yellow olives on dark wood.

Part A: Bag Holder Body

With cream, ch 40 and join with a sl st to form a ring. Make sure the chain is not twisted.

Rnd 1: Ch 1, sc in each ch, join. (40 sc)

Rnds 2–6: Ch 1, sc BLO in each st, join. (40 sc)

Rnd 7 (mesh set-up): Ch 1, sc in first st, ch 5, sk 3 sts, sc in next st 9 times, ch 5, sk last 3 sts, join. (10 sc, 10 ch-5 loops)

Rnds 8–10: Net round (ch-5). (10 loops)

Rnds 11–14: Net round (ch-6). (10 loops)

Rnds 15–28: Net round (ch-7). (10 loops)

The longer chains open the diamonds and widen the tube to 6.5 in (16.5 cm). Because the loop count never changes, the lattice stays aligned.

Rnds 29–32: Net round (ch-6). (10 loops)

Rnds 33–36: Net round (ch-5). (10 loops)

Rnd 37 (conversion): Ch 1, sc in next sc, 3 sc in next loop 6 times, sc in next sc, 2 sc in next loop 4 times, join.
Count: 10 sc into the 10 sc, plus 26 sc into the loops (6 × 3 + 4 × 2) = 36 sc.

Rnds 38–42: Ch 1, sc BLO in each st, join. (36 sc)

Fasten off. The body now measures 15 in (38.1 cm) long.

Hanging loop:
1. Join cream at the center back of Rnd 42.
2. Ch 24, sk 1 st and sl st in the next st.
3. Ch 1 and work 30 sc over the chain.
4. Sl st at the base and fasten off.

The loop stands 3 in (7.6 cm) tall.

Part B: Towel Ring Cover

With cream, ch 11.

Row 1: Sc in 2nd ch from hook and in each ch across, turn. (10 sc)

Rows 2–60: Ch 1, sc in each st, turn. (10 sc)

Fasten off, leaving a 40 in (101.6 cm) tail. The strip measures 2.5 in (6.4 cm) by 15 in (38.1 cm).

Cover the ring:
1. Wrap the batting around the macramé ring until it is 0.8 in (2.0 cm) thick.
2. Fold the strip around the padding, with the row ridges running around the ring.
3. Whipstitch the long edges together along the inner edge.
4. Sew the short ends together.

Part C: Fan

With cream, make a magic ring.

Row 1: Ch 3 (counts as dc), 8 dc in ring. Pull the ring closed into a half circle and turn. (9 dc)

Row 2: Ch 3 (counts as dc), dc in same st, 2 dc in each of next 7 sts, dc in last st, turn. (17 dc)

Row 3: Ch 1, sc in first st, ch 3, sk 1, sc in next st 8 times. (9 sc, 8 arches)

The fan measures 2.25 in (5.7 cm) wide and 1.25 in (3.2 cm) tall.

Fan loop:
1. Join cream in the 5th sc of Row 3.
2. Ch 24 and sl st in the same sc.
3. Ch 1 and work 30 sc over the loop.
4. Sl st at the base and fasten off.

Part D: Appliqués

Leaf (olive green):
1. Ch 9.
2. Sc in 2nd ch from hook, hdc in next ch, dc in next 3 ch, hdc in next ch, sc in next ch, 3 sc in last ch.
3. Working along the other side of the chain: sc in next ch, hdc in next ch, dc in next 3 ch, hdc in next ch, sc in next ch.
4. Sl st in the tip.

Each leaf has 17 sts plus the tip sl st. It is a pointed oval about 2 in (5.1 cm) long and 0.75 in (1.9 cm) wide, and the dc center makes it stand slightly raised.

Olive (light olive green): Make a magic ring.

  • Rnd 1: 6 sc in ring. (6 sc)
  • Rnd 2: Sc in next st, 2 sc in next st 3 times. (9 sc)
  • Rnds 3–4: Sc in each st. (9 sc)
  • Rnd 5: Sc in next st, sc2tog 3 times. (6 sc)

Stuff lightly and close the hole. Each olive is 0.9 in (2.3 cm) long and 0.6 in (1.5 cm) wide.

Stems and bow cord (olive green): For each one, chain the number below, then sl st in the back bump of the 2nd ch from hook and in each ch across.

  • Main stem: ch 41 (40 sl st, 10 in / 25.4 cm)
  • Twig: ch 6 (5 sl st, 1.25 in / 3.2 cm)
  • Bow cord: ch 61 (60 sl st, 15 in / 38.1 cm)

Make All Pieces

Component Color Holder Ring
Ruffles Cream + olive green 2 0
Leaves Olive green 14 6
Olives Light olive green 7 3
Main stem Olive green 1 0
Twigs Olive green 3 0
Bow cord Olive green 1 0

Holder front layout (top to bottom):

[ top ruffle + loop        ]
[ bow                      ]
[ L  stem  L   twig: 3 olives ]
[ L  stem  L               ]
[ twig: 2 olives  stem  L  ]
[ L  stem  L               ]
[ L  stem  twig: 2 olives  ]
[ bottom ruffle            ]

Ring layout: Three leaves fan out to the left and three to the right. The three olives sit clustered in the center at the base of the fan.

Joining and Assembly

Sew with matching yarn, catching one loop of each edge stitch.

  1. Bottom ruffle: Match its 40-st foundation to the 40 foundation loops of the body, stitch for stitch, with the ruffle hanging down.
  2. Top ruffle: Match its 36-st foundation to the 36 sts of Rnd 42, with the ruffle flaring up around the loop.
  3. Branch: Sew the stem down the center front. Start just below the top band and end 2 in (5.1 cm) above the bottom band. Add the twigs angled outward, with olives at their tips.
  4. Leaves: Sew each leaf base to the stem, alternating sides and angling slightly downward. Tack the tips flat.
  5. Bow: Tie a bow with 1.25 in (3.2 cm) loops and sew it under the top ruffle.
  6. Ring: Sew the fan’s straight edge over the ring seam. Then add the leaves and olives at the fan base.

Keep your sewing tension firm without puckering the mesh. Checkpoint: the holder should still measure 6.5 in (16.5 cm) wide at the middle and 18 in (45.7 cm) long with ruffles.

Border: Scalloped Ruffle Trims

The ruffles act as the border. They use the body gauge of 4 sc per 1 in (2.5 cm), so each ruffle foundation matches its body edge exactly.

Bottom ruffle: With cream, ch 40 and join into a ring.

  • Rnd 1: Ch 1, sc in each ch, join. (40 sc; 20 per flat side)
  • Rnd 2 (growth): Ch 3 (counts as dc), 2 dc in next st, dc in next st, 2 dc in next st around, join. Count: 40 dc worked 1 per st, plus 20 extra = 60 dc (30 per side).
  • Rnd 3: Ch 1, sc in first st, sk 2, 7 dc in next st, sk 2, sc in next st, sk 2, 7 dc in next st, sk 2 around, join. (10 shells; 5 per side)
  • Rnd 4 (trim, olive green): Join in any sc. Ch 1, sc in sc, sc in next 3 dc, 3 sc in center dc, sc in next 3 dc around, join. Count: 80 sts worked 1 per st, plus 20 extra = 100 sc (50 per side).

Top ruffle: Work it the same way, starting with ch 36.

  • Rnd 1: 36 sc (18 per side)
  • Rnd 2: 36 + 18 = 54 dc
  • Rnd 3: 9 shells
  • Rnd 4: 72 + 18 = 90 sc

Why the math works:
– Each ruffle foundation matches its body edge: 40 at the bottom and 36 at the top.
– Rnd 2 multiplies the count by 1.5, giving 60 and 54. Both divide evenly by 6, the shell repeat.
– Rnd 4 adds exactly 2 sts per shell.

Final Blocking

  1. Weave in all ends inside the bands and appliqués.
  2. Soak both pieces in cool water for 10 minutes, then roll them in a towel to press out the water.
  3. Put a rolled towel inside the holder and shape it to 5 in (12.7 cm) at the bottom, 6.5 in (16.5 cm) at the middle and 4.5 in (11.4 cm) at the top.
  4. Open each diamond evenly with your fingers.
  5. Pin the ruffle scallops into points and flatten the leaves.
  6. Pin the ring’s fan upright.
  7. Let both pieces dry completely.

Final Quality-Control Checklist

  • Every net round has 10 loops.
  • The bands have 40 and 36 sts.
  • The body measures 15 in (38.1 cm).
  • The ruffles have 10 and 9 shells, with full green edges.
  • All 20 leaves and 10 olives are secure.
  • The ring seam is on the inner edge, and the padding is hidden.
  • Both loops hold up to a firm tug.

Troubleshooting

  • Lattice spirals: Sl st to the loop center at the start of every round.
  • No vase shape: Check that the ch-6 and ch-7 rounds are in the right places.
  • Ruffle tight: Recount Rnd 2. It should have 60 or 54 dc.
  • Leaves curl: Steam them and tack the tips.
  • Bags drop out: Weave a cord through the bottom band and snug it slightly.
  • Padding shows: Add a batting layer or work one more row.

Care

Hand wash in cool water with mild soap and lay flat to dry. Reshape the ruffles and lattice while damp.

Crocheted beige towel holder with olive and black fruit details mounted beside a potted plant and woven basket.

Final Notes

The measurement chain links every stage:
– The 40-st band measures 5 in (12.7 cm).
– Ten lattice loops grow to 6.5 in (16.5 cm) wide.
– The 36-st top measures 4.5 in (11.4 cm).
– The ruffles start from those same counts.
– The ring’s 60 rows cover a 15 in (38.1 cm) centerline.

Check each stage and the set will hang neatly side by side.

Happy crocheting!

Leave a Comment