Lavender Honeycomb Bag Holder Crochet Pattern

This teardrop bag holder takes care of the pile of plastic bags under the sink. A solid lavender base gives it a firm, rounded bottom, and a deep purple net body shows off the honeycomb texture. The opening is finished with a lavender rim and a single strap, so it hangs straight from a cabinet knob or hook.

The colors are soft lavender and rich grape purple, a calm pairing that suits a cottage-style kitchen. A teal net with lavender trim works just as well if you want a second holder for another room. You stuff bags in through the top and pull them out one at a time through the slot near the bottom.

The pattern uses US crochet terms. The finished body is about 13.5 in (34.3 cm) tall and 7.5 in (19.1 cm) wide at its widest point. The top opening lies 4.5 in (11.4 cm) wide when flat, and the strap is 8 in (20.3 cm) long.

You make the whole holder as one piece, from the bottom up. First you crochet a flat single crochet circle, build up the lavender sides and make the dispenser slot. Then you switch to purple for a chain-loop net whose chains get shorter toward the top, which creates the teardrop taper. Last, you add a lavender rim band and work the strap straight off the rim.

Finished Size and Construction

  • Finished size: 13.5 in (34.3 cm) tall, 7.5 in (19.1 cm) wide at the widest point, laid flat
  • Skill level: Easy / advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), cotton or cotton blend
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 1, worked in one continuous piece
  • Layout: Single piece; no joining needed
  • Piece size: Base circle 3.75 in (9.5 cm) across; full holder as above
  • Size before border: 12.5 in (31.8 cm) tall after the last mesh round
  • Border depth: Rim band about 1 in (2.5 cm) deep, plus an 8 in (20.3 cm) strap

Materials

Use a smooth worsted-weight cotton or cotton-acrylic blend. Cotton holds its shape, doesn’t stretch much under the weight of the bags, and keeps the honeycomb mesh looking crisp. Avoid very fuzzy or very stretchy yarns, because the net will sag.

The amounts below assume a yarn with about 170 m per 100 g:

  • Color A – Lavender (base, rim, strap): 60 g, about 102 m
  • Color B – Grape Purple (mesh body): 75 g, about 128 m
  • Optional variation: Use teal instead of Color B, 75 g, about 128 m

Tools:

  • 5.0 mm (H-8) crochet hook
  • Stitch marker
  • Tapestry needle
  • Scissors
  • Measuring tape
  • Rust-proof pins and a towel for blocking

These quantities include a margin of about 20%, so you won’t run short if you crochet a little loosely.

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • sc2tog – single crochet 2 together (decrease)
  • sl st – slip stitch
  • sk – skip
  • st(s) – stitch(es)
  • sp – space
  • rnd(s) – round(s)
  • MR – magic ring

Special stitch – Net loop: Chain the stated number, then sc in the next ch-loop of the previous round. Each sc anchors the center of a loop below, and the stacked loops form the diamond honeycomb openings.

Moving to the next loop: At the end of each mesh round, join to the first sc with a sl st. Then sl st into each ch until you reach the center ch of the first loop (2 sl sts for ch-5 loops, 2 for ch-4, 1 for ch-3). Start the next round in that loop.

Gauge and Checkpoints

Gauge: 16 sc and 18 rnds = 4 in (10.2 cm) with a 5.0 mm hook.

Use the base as your swatch. Work Rnds 1–8, then check the size before you go on.

Checkpoints:

  • After Rnd 8: The flat circle measures 3.75 in (9.5 cm) across.
  • After Rnd 15: The lavender cup stands about 1.75 in (4.4 cm) tall from the table to the top edge. It lies 7.5 in (19.1 cm) wide when flattened (60 sts ÷ 4 sts per inch = 15 in / 38.1 cm around).
  • After Rnd 26: The piece measures about 9 in (22.9 cm) from the bottom.
  • After Rnd 33: The piece measures about 12.5 in (31.8 cm) from the bottom.
  • After Rnd 37: The piece measures about 13.5 in (34.3 cm), and the rim lies 4.5 in (11.4 cm) wide when flat.

If your base is too big: Go down a half or full hook size and start over. A loose base makes a floppy bottom and a slot that gapes.

If your base is too small: Go up a hook size. A tight base will curl, and the slot will be too narrow to pull bags through.

Mesh rounds stretch, so measure them gently and don’t pull the piece lengthwise.

Close-up of deep purple crocheted fabric showing interlocking mesh pattern with a light purple trim edge.

Base (Color A – Lavender)

Work Rnds 1–8 in continuous spiral rounds. Place a marker in the first st of each round and move it up as you go.

Rnd 1: MR, 6 sc in ring. (6 sts)

Rnd 2: 2 sc in each st around. (12 sts)

Rnd 3: (Sc 1, 2 sc in next st) 6 times. (18 sts)

Rnd 4: (Sc 2, 2 sc in next st) 6 times. (24 sts)

Rnd 5: (Sc 3, 2 sc in next st) 6 times. (30 sts)

Rnd 6: (Sc 4, 2 sc in next st) 6 times. (36 sts)

Rnd 7: (Sc 5, 2 sc in next st) 6 times. (42 sts)

Rnd 8: (Sc 6, 2 sc in next st) 6 times. (48 sts)

Checkpoint: 3.75 in (9.5 cm) across.

The next two rounds space the increases further apart, so the edge starts to cup upward and form the rounded teardrop bottom.

Rnd 9: (Sc 7, 2 sc in next st) 6 times. (54 sts)

Rnd 10: (Sc 8, 2 sc in next st) 6 times. (60 sts)

Rnds 11–12: Sc in each st around. (60 sts)

Dispenser Slot (Color A)

The slot is a horizontal opening, like a large buttonhole, in the lavender band at the bottom.

Rnd 13: Sc in next 24 sts, ch 12, sk next 12 sts, sc in last 24 sts. (24 sc + 12 ch + 24 sc = 60 sts)

Rnd 14: Sc in next 24 sts, sc in each of the 12 ch, sc in last 24 sts. (60 sts)

Work each sc into the back bump of the chain so the lower edge of the slot looks as neat as the upper edge.

Rnd 15: Sc in each st around, then sl st to the next st to smooth out the step of the spiral. (60 sts)

The slot is 12 sts wide, so it measures 12 ÷ 4 = 3 in (7.6 cm) across and about 0.5 in (1.3 cm) tall. Fasten off Color A.

Mesh Body (Color B – Grape Purple)

From here on, work in joined rounds. Join Color B with a sl st in any st on the side opposite the slot.

Rnd 16 (conversion round): Ch 1, sc in same st, (ch 5, sk 3 sts, sc in next st) 14 times, ch 5, sk last 3 sts, sl st to first sc.

Count: The 60 sts are used as 15 groups of 4 (1 sc + 3 skipped sts). That gives 15 sc + 15 ch-5 loops.

Rnd 17: Sl st in next 2 ch, ch 1, sc in same ch-5 loop, (ch 5, sc in next ch-5 loop) 14 times, ch 5, sl st to first sc. (15 ch-5 loops)

Rnds 18–26: Repeat Rnd 17. (15 ch-5 loops each round)

Checkpoint: about 9 in (22.9 cm) from the bottom. The net bellies out slightly above the base, which gives the full teardrop curve.

Now shorten the chains to start the taper. You keep 15 loops, but each loop gets narrower, so the body pulls in toward the top.

Rnd 27: Sl st in next 2 ch, ch 1, sc in same ch-5 loop, (ch 4, sc in next loop) 14 times, ch 4, sl st to first sc. (15 ch-4 loops)

Rnds 28–30: Sl st in next 2 ch, ch 1, sc in same loop, (ch 4, sc in next loop) 14 times, ch 4, sl st to first sc. (15 ch-4 loops each round)

Rnd 31: Sl st in next 2 ch, ch 1, sc in same loop, (ch 3, sc in next loop) 14 times, ch 3, sl st to first sc. (15 ch-3 loops)

Rnds 32–33: Sl st in next ch, ch 1, sc in same loop, (ch 3, sc in next loop) 14 times, ch 3, sl st to first sc. (15 ch-3 loops each round)

Checkpoint: about 12.5 in (31.8 cm) from the bottom. You have now worked 18 mesh rounds (Rnds 16–33). Fasten off Color B.

Border: Top Rim and Hanging Strap (Color A)

Border gauge: Same as the base, 16 sc = 4 in (10.2 cm). The rim needs to end with 36 sts. That’s 9 in (22.9 cm) around, so it lies 4.5 in (11.4 cm) wide when flat, with 18 sts per side.

Join Color A with a sl st in any sc of Rnd 33.

Rnd 34 (conversion round): Ch 1, sc in same sc, 2 sc in next ch-3 loop, (sc in next sc, 2 sc in next ch-3 loop) 14 times, sl st to first sc.

Count: 15 sc (1 per existing sc) + 30 sc (2 in each of 15 loops) = 45 sts.

Rnd 35 (trim round): Ch 1, (sc in next 3 sts, sc2tog) 9 times, sl st to first sc.

Count: Each of the 9 repeats uses 5 sts (45 sts total) and makes 4 sts. That’s 36 sts, or 18 sts per side when flat.

Rnds 36–37: Ch 1, sc in each st around, sl st to first sc. (36 sts each round)

Don’t fasten off.

Why the math works: Rnd 34 puts 45 sts across the 15 loops, so the rim sits flat and doesn’t pull the mesh into a pucker. Rnd 35 then removes exactly 9 sts to reach 36. At 4 sts per inch, 36 sts is 9 in (22.9 cm) around, which matches the 4.5 in (11.4 cm) flat width. The rim adds about 1 in (2.5 cm) of height, which takes the holder from 12.5 in to 13.5 in (31.8 cm to 34.3 cm).

Find the strap stitches: Flatten the holder with the slot centered on the front. On each side fold of the rim, mark the 4 sts at the center of the fold. Between the two groups there should be 14 sts on the front and 14 on the back (4 + 14 + 4 + 14 = 36).

Strap: Sl st across to the first marked st on one side.

Row 1: Ch 1, sc in next 4 sts, turn. (4 sts)

Rows 2–36: Ch 1, sc in each st across, turn. (4 sts each row)

At 18 rows per 4 in, 36 rows measure 8 in (20.3 cm). The strap is 1 in (2.5 cm) wide.

Attach: Bring the strap over the opening without twisting it. Line up the 4 strap sts with the 4 marked sts on the other side, then sl st through both layers, 1 strap st to 1 rim st. (4 sl sts)

Fasten off and weave in all ends on the inside.

Final Blocking

  1. Soak the holder in cool water, then gently squeeze the water out. Don’t wring it.
  2. Roll it in a towel and press to remove more water.
  3. Loosely stuff the body with a plastic bag or towel so it takes on the teardrop shape.
  4. Use your fingers to ease the honeycomb openings into even diamonds.
  5. Flatten the slot edges and pin the rim into a neat 4.5 in (11.4 cm) wide circle.
  6. Lay the strap flat and pin it straight at 8 in (20.3 cm).
  7. Let it dry completely, standing on its base, before you hang it.

Final Quality-Control Checklist

  • The base is 3.75 in (9.5 cm) across and lies flat inside.
  • The slot is 3 in (7.6 cm) wide and centered, with 12 sc along its upper and lower edges.
  • The lavender band has 60 sts, with no missed increases.
  • Every mesh round has exactly 15 loops.
  • The chain lengths step down from 5 to 4 to 3.
  • The rim has 45 sts on Rnd 34 and 36 sts on Rnds 35–37.
  • The strap is 4 sts wide and 36 rows long, centered on the side folds, with no twist.
  • The total height is about 13.5 in (34.3 cm).
  • All ends are woven in on the inside.

Troubleshooting

  • Base ruffles: You’re crocheting loosely or added extra increases. Recount each round and go down a hook size.
  • Base cups too early: You’re crocheting too tightly. Go up a hook size for Rnds 1–8.
  • Slot looks stretched: Work Rnd 14 into the back bumps of the chain, and keep the 12 ch as tight as your sc.
  • Mesh spirals: A round started in the wrong place. Always sl st to the center of the first loop before the ch 1.
  • Wrong loop count: Count the loops at the end of every round. If you have 14 or 16, rip back to the last correct round.
  • Rim flares: Go down a hook size for Rnds 34–37, or crochet Rnd 34 more tightly.
  • Rim puckers: Make sure you have 2 sc in every loop on Rnd 34.
  • Strap stretches: Use cotton instead of acrylic, or go down a hook size for the strap only.

Care

Hand wash in cool water with mild soap and reshape while damp. Dry it flat or standing upright, and don’t tumble dry.

Purple and teal crocheted bags with geometric patterns hang beside a potted plant on a modern white wall.

Final Notes

The measurements build on each other. A 3.75 in (9.5 cm) base grows into a 60-stitch band that’s 7.5 in (19.1 cm) wide, with a 3 in (7.6 cm) slot. Fifteen net loops carry that width up the body, and the shorter chains taper it to about 12.5 in (31.8 cm) tall. A 36-stitch rim brings the opening to 4.5 in (11.4 cm) wide and the height to 13.5 in (34.3 cm). The 8 in (20.3 cm) strap gets it ready to hang. If you hit each checkpoint along the way, your finished holder will match.

Happy crocheting!

Leave a Comment