This little tree ornament stacks hot-pink fan shells into a classic triangle and sets them on a brown single crochet trunk. The fans make a lacy, scalloped silhouette with small open windows between the tiers, so it looks bright and light on a real branch.
The design uses two colors: hot pink for the tree and a warm brown for the trunk. The style is modern and a little playful. A bold pink tree stands out against green needles and warm string lights. All instructions use US crochet terms.
The finished ornament measures about 5 in (12.7 cm) wide and 4.75 in (12.1 cm) tall from the bottom of the trunk to the tip. The hanging loop adds about 2.5 in (6.4 cm), for a total hanging length of about 7.25 in (18.4 cm).
Construction is simple and done in one piece. First you work the trunk in brown rows. Then you add a pink baseline that extends out on both sides of the trunk, and work three fan tiers on top of it in turning rows. A chain loop at the tip finishes the ornament. There is nothing to sew except the ends you weave in.
Finished Size and Construction
- Finished size: 5 in (12.7 cm) wide x 4.75 in (12.1 cm) tall, plus a 2.5 in (6.4 cm) loop
- Skill level: Easy (advanced beginner)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4)
- Hook: 4.5 mm (US 7)
- Number of pieces: 1
- Layout: One flat tree: trunk, baseline, then fan tiers of 3, 2 and 1
- Piece size: 5 in (12.7 cm) x 4.75 in (12.1 cm)
- Size before border: Same as finished size, because the fan edge is the border
- Border depth: 0 in (0 cm); no separate border is added
Materials
Yarn: Use a smooth worsted-weight cotton or cotton blend. Cotton shows the fan spokes clearly and holds its shape when it hangs. Acrylic also works, but it gives a softer, slightly puffier fan.
- Hot pink (tree and loop): about 10 g / 20 m
- Brown (trunk): about 4 g / 8 m
These quantities include a margin for your gauge swatch, yarn tails and small tension differences. One ornament uses less than this.
Tools:
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Scissors
- Stitch marker (optional, for the center stitch of each fan)
- Rustproof pins and a foam blocking mat
- Spray bottle with water
- Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS – right side
- rep – repeat
Special stitch – Fan: Work 9 dc into the stitch or chain space you are told to use. The 5th dc of a fan is its center dc. The upper tiers are anchored in this stitch.
Gauge and Checkpoints
Gauge: 16 sc and 18 rows = 4 in (10.2 cm) with a 4.5 mm hook.
Gauge isn’t critical for an ornament, but it controls the final size and how neatly the fans sit side by side. The most useful test is to make one complete ornament first and measure it against the checkpoints below.
Measurement checkpoints:
- Trunk: 1.75 in (4.4 cm) wide x about 1.5 in (3.8 cm) tall.
- Pink Row 2 (baseline): 4.75 in (12.1 cm) wide.
- After Tier 1 (Row 3): about 5 in (12.7 cm) wide; about 2.75 in (7.0 cm) tall from the bottom of the trunk.
- After Tier 2 (Row 5): about 3.75 in (9.5 cm) tall.
- After Tier 3 (Row 7): about 4.75 in (12.1 cm) tall.
- Hanging loop: about 2.5 in (6.4 cm) tall when it hangs.
If your piece is too big: go down to a 4.0 mm (US 6) hook, or check that your dc aren’t loose at the top.
If your piece is too small: go up to a 5.0 mm (US H-8) hook. Small fans tend to cup and won’t sit flat.

Pattern
Trunk (Brown)
With brown, ch 8.
Row 1: Sc in 2nd ch from hook and in each ch across. Turn. (7 sc)
Rows 2–7: Ch 1 (does not count as a st), sc in each sc across. Turn. (7 sc in each row)
At the end of Row 7, fasten off and leave a 6 in (15.2 cm) tail.
Checkpoint: The trunk is 7 sts wide and 7 rows tall: 1.75 in (4.4 cm) x about 1.5 in (3.8 cm).
Baseline (Pink)
The baseline extends 6 stitches beyond the trunk on each side, so the tree is much wider than the trunk.
Row 1: Make a slip knot with pink and put it on the hook. Ch 6. Hold the trunk with its last row along the top and its RS facing you. Sc in the first sc of the trunk’s top edge, then sc in each of the next 6 sc. Ch 7. Turn.
(7 sc + 13 ch; the 6 starting ch hang free on one side and the 7 new ch hang free on the other)
Row 2: Sc in 2nd ch from hook and in each of the next 5 ch (6 sc). Sc in each of the 7 sc over the trunk (13 sc). Sc in each of the 6 starting ch (19 sc). Turn.
(19 sc)
Checkpoint: The baseline measures 4.75 in (12.1 cm), and the trunk sits centered under stitches 7–13. That leaves 6 baseline stitches on each side of the trunk.
Tier 1 – Three Fans
Row 3: Ch 1, sc in first sc. Sk 2 sc, Fan (9 dc) in next sc, sk 2 sc, sc in next sc. Rep from * 2 more times. Do not turn yet.
(3 fans + 4 sc = 31 sts: 27 dc + 4 sc)*
Math check: Each repeat uses 6 baseline stitches (2 skipped + 1 fan + 2 skipped + 1 sc). 1 + (3 x 6) = 19, so the row ends exactly in the last baseline sc.
The anchoring sc stitches fall on baseline stitches 1, 7, 13 and 19. The fans are centered on stitches 4, 10 and 16, so the middle fan sits directly over the trunk.
Checkpoint: About 5 in (12.7 cm) wide, because the fan tops flare a little past the baseline. Height from the bottom of the trunk is about 2.75 in (7.0 cm).
Tier 2 – Two Fans
Row 4 (bridge row): Turn. Sl st in first sc and in each of the next 5 dc. You are now in the center dc of the first fan. Ch 1, sc in the same dc. Ch 5, sc in the center dc of the next fan. Rep from * once more. Leave the rest of the row unworked. Turn.
(3 sc + 2 ch-5 sps)*
Each ch-5 bridges the valley between two fans. These bridges make the open holes between the tiers.
Row 5: Ch 1, sc in first sc. Fan (9 dc) in next ch-5 sp, sc in next sc. Rep from * once more.
(2 fans + 3 sc = 21 sts: 18 dc + 3 sc)*
Checkpoint: About 3.75 in (9.5 cm) tall from the bottom of the trunk. The two fans should sit centered over the gaps between the three Tier 1 fans.
Tier 3 – Top Fan
Row 6 (bridge row): Turn. Sl st in first sc and in each of the next 5 dc to reach the center dc of the first fan. Ch 1, sc in the same dc, ch 5, sc in the center dc of the next fan. Leave the rest unworked. Turn.
(2 sc + 1 ch-5 sp)
Row 7: Ch 1, sc in first sc, Fan (9 dc) in ch-5 sp, sc in last sc.
(1 fan + 2 sc = 11 sts: 9 dc + 2 sc)
Checkpoint: About 4.75 in (12.1 cm) tall from the bottom of the trunk to the top of this fan.
Hanging Loop
Turn. Sl st in first sc and in each of the next 5 dc to reach the center dc of the top fan. Ch 30, then sl st in the same center dc to close the loop. Fasten off and leave a 6 in (15.2 cm) tail.
Checkpoint: The loop stands about 2.5 in (6.4 cm) above the tip. The total hanging length is about 7.25 in (18.4 cm).
Finishing the Ends
Weave in the brown tails along the trunk edges. Weave the pink starting tail into the underside of the baseline. Run the final pink tail down through the sl sts at the loop base, then back up once to secure the loop. Trim close.
Border
This design doesn’t have a separate border. The edge is part of the structure: the solid sc baseline runs along the bottom, and the scalloped fan tops form the sides and tip. An extra round of sc would fill in the scallops and blur the tiered tree look you see on the finished piece.
Border gauge: The edge follows the main gauge of 16 sc = 4 in (10.2 cm).
Edge counts per side:
- Bottom edge (baseline): 19 sc, including both end stitches. That is 6 sc on each side of the trunk plus 7 sc over the trunk.
- Trunk bottom: 7 sc (the foundation of the trunk).
- Each sloped side: 3 fan halves, one per tier. Each fan half is 4 dc plus the shared center dc, with 1 anchoring sc where the fan meets the stitch below.
- Top: 1 fan of 9 dc. The loop is anchored in its 5th dc.
Why the math works: Each fan needs 6 base stitches. 3 fans x 6 = 18, plus 1 starting sc = 19, which is exactly the baseline count. Each upper tier is anchored in center dc stitches, so it always sits halfway between the fans below and steps in by half a fan on each side. Three tiers of 3, 2 and 1 give a symmetrical triangle with the trunk exactly centered.
Final Blocking
- Lightly mist the ornament with water until it is damp but not soaked.
- Lay it RS up on the blocking mat.
- Pin the baseline straight. Check that it measures 4.75 in (12.1 cm) and that the trunk sits centered and square at 1.75 in (4.4 cm) wide.
- Gently open each fan into a smooth half circle. Pin the 1st and 9th dc of each fan to define the scallops.
- Pin the tip of the top fan so the overall height is 4.75 in (12.1 cm) and the widest point is 5 in (12.7 cm).
- Open the holes between the tiers with a fingertip so they read as small, even windows.
- Pull the loop straight upward and pin it at 2.5 in (6.4 cm).
- Let the ornament dry completely, then unpin.
Final Quality-Control Checklist
- Trunk is 7 sts wide, 7 rows tall, square and centered.
- Baseline has 19 sc and lies flat with no ruffling.
- Tier 1 has 3 fans, Tier 2 has 2 and Tier 3 has 1. Every fan has 9 dc.
- Each upper fan sits centered over the gap between the two fans below it.
- Open holes show between the tiers.
- Loop is anchored in the center dc of the top fan and hangs straight.
- Finished size is about 5 in (12.7 cm) x 4.75 in (12.1 cm).
- All ends are woven in securely and invisible from the RS.
Troubleshooting
The fans ruffle or cup. Your dc are too tight for the space. Go up a hook size, or make sure you skip exactly 2 sc on each side of every fan.
The baseline pulls the trunk wider. Work the 7 sc over the trunk at the same tension as the trunk rows, and don’t add extra stitches.
The tiers lean to one side. Count the sl sts on the bridge rows: 1 sc plus 5 dc lands in the center dc. Using a stitch marker in each center dc makes this easier.
The bridges pull the lower fans together. Your ch-5 is too tight. Loosen your chains, or work ch 6 on both bridges of that row.
The loop twists. Block it straight while damp, or work the 30 ch a little more loosely.
The holes close up. Open them during blocking and pin the fan edges apart.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, reshaping the fans. Store it flat in tissue paper between seasons so the loop and scallops keep their shape.

Final Notes
The size of the whole ornament follows one measurement chain. The 7-stitch trunk measures 1.75 in (4.4 cm). It sits centered under a 19-stitch baseline of 4.75 in (12.1 cm). That baseline divides into three 6-stitch fan repeats, which flare to 5 in (12.7 cm). The tiers then step in by half a fan each: 3 fans, then 2, then 1, reaching 4.75 in (12.1 cm) tall. A 30-chain loop adds about 2.5 in (6.4 cm) on top. If each checkpoint matches, the finished tree will match too. Make one in pink as shown, or try other colors for a whole branch of them.
Happy crocheting!