Tidewater Fan Strip Door Curtain Crochet Pattern

The Tidewater Fan Curtain is a door curtain made of six long, narrow crochet strips. Each strip is a column of stacked fan shells, one fan per row, alternating deep teal and soft cream. The strips aren’t sewn together. Each one hangs from the curtain rod by its own small loop, so you can walk through the doorway and push the strips aside like a beaded curtain.

There are two versions of the strip. Strip A has a teal border and starts and ends with a teal fan. Strip B is its mirror image, with a cream border and cream fans at both ends. When you hang them in A-B-A-B-A-B order, the colors alternate across the doorway with no extra planning. The look is calm and slightly vintage. It suits a doorway, a wardrobe opening, or a pantry nook.

This pattern uses US crochet terms. Each finished strip is 4.25 in (10.8 cm) wide and 76.5 in (194.3 cm) long, and the hanging loop adds about 2 in (5.1 cm). With 0.5 in (1.3 cm) gaps between the strips, the curtain is 28 in (71.1 cm) wide.

You crochet each strip in rows from a short foundation chain, changing color every row. Then you add a two-round single crochet border in the strip’s main color. The hanging loop is worked into the top edge of the border.

Finished Size and Construction

  • Finished strip size: 4.25 in x 76.5 in (10.8 cm x 194.3 cm), plus a 2 in (5.1 cm) hanging loop
  • Finished curtain width: 28 in (71.1 cm) with 0.5 in (1.3 cm) gaps
  • Skill level: Easy-Intermediate (basic stitches, but a long project with two colors to manage)
  • Terminology: US
  • Yarn weight: Worsted (Medium #4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 6 separate strips (3 x Strip A, 3 x Strip B)
  • Layout: 6 strips side by side, each hung on its own, not joined
  • Strip body before border: 3.25 in x 75.5 in (8.3 cm x 191.8 cm)
  • Border depth: 0.5 in (1.3 cm) on every side, 2 rounds

Materials

Choose a smooth worsted-weight cotton or cotton blend with good stitch definition. Mercerized cotton shows the fan spokes best and resists stretching on a long hanging piece. Avoid soft, splitty, or fuzzy yarns, because the strips hang under their own weight.

  • Color A, deep teal: 200 g / 360 m (about 2 balls of 100 g / 180 m)
  • Color B, cream: 200 g / 360 m (about 2 balls of 100 g / 180 m)

These amounts include about 20% extra for your test piece, differences in tension, and weaving in ends.

Tools:

  • 5.0 mm (H-8) crochet hook
  • 4 locking stitch markers
  • Tapestry needle
  • Scissors
  • Tape measure
  • Blocking mats or a large towel, rust-proof pins, and a spray bottle
  • Curtain rod, up to 1 in (2.5 cm) in diameter

Abbreviations (US Terms)

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • dc = double crochet
  • tr = treble crochet
  • st(s) = stitch(es)
  • MC / CC = main color / contrast color

Special stitch, Fan: 11 dc in the same stitch. The fan sits on one stitch and spreads over the 5 skipped stitches on each side.

Edge posts: Each fan row starts with “ch 4 (counts as tr)” and ends with 1 tr in the last stitch. These tall posts fill the space beside each fan and keep the strip edges straight.

Gauge and Checkpoints

Gauge: 16 sc and 16 sc rows = 4 in (10.2 cm). One fan row (13 sts) is 3.25 in (8.3 cm) wide and 1 in (2.5 cm) tall.

Make a short test strip first: the foundation chain, Row 1, 8 fan rows, and one sc row on top. It should measure 3.25 in x 8.5 in (8.3 cm x 21.6 cm). If it does, unravel it or keep it as a tieback sample.

Checkpoints for each full strip, measured from the foundation chain with the strip lightly patted flat:

  • After Row 1: 3.25 in (8.3 cm) wide
  • After Row 11 (10 fan rows): 10.25 in (26.0 cm) long
  • After Row 26 (25 fan rows): 25.25 in (64.1 cm) long
  • After Row 51 (50 fan rows): 50.25 in (127.6 cm) long
  • After Row 76 (75 fan rows): 75.25 in (191.1 cm) long
  • After Row 77: 3.25 in x 75.5 in (8.3 cm x 191.8 cm)
  • After the border: 4.25 in x 76.5 in (10.8 cm x 194.3 cm)

If the strip is too big: Switch to a 4.5 mm hook. Tall stitches are usually the cause, so also try pulling up the first loop of each dc and tr a little shorter.

If the strip is too small: Switch to a 5.5 mm hook.

Don’t change the stitch counts to fix the size. The border math depends on 13 sts across and 75 fan rows.

Crochet detail showing teal borders and cream-colored fan motifs arranged symmetrically on a light background.

Strip Pattern

Color Management

Every fan row uses the other color, but you never cut the yarn between rows. Follow this rule:

At the end of each row, drop the working loop and put a stitch marker in it. Find the next color. If it’s waiting at the edge where you just finished, turn your work. If it’s waiting at the opposite edge, don’t turn: pick up that loop and start the row from there. Carry the unused yarn loosely up the side; it never skips more than 2 rows. The border covers these carried strands completely.

The fan rows are symmetrical, so they look the same from either side of the work.

Strip A (teal border, teal end fans)

MC = teal. CC = cream.

Foundation: With MC, ch 14.

Row 1 (sc row, MC): Sc in 2nd ch from hook and in each ch across, turn. (13 sc)

Row 2 (fan row, MC): Ch 4 (counts as tr), skip next 5 sts, Fan in next st (the 7th st), skip next 5 sts, tr in last st. (13 sts: 2 tr + 11 dc) Drop MC.

Row 3 (fan row, CC): Join CC at the edge where Row 2 ended, then turn. Ch 4 (counts as tr), skip next 5 dc, Fan in next dc (the 6th dc, which is the center of the fan below), skip next 5 dc, tr in top of ch-4. (13 sts: 2 tr + 11 dc) Drop CC.

Row 4 (fan row, MC): Pick up MC using the color rule. Ch 4 (counts as tr), skip next 5 dc, Fan in center dc, skip next 5 dc, tr in last st. (13 sts) Drop MC.

Rows 5–76: Repeat Row 4, switching color every row: odd rows in CC, even rows in MC. Each fan sits directly above the center of the fan below. Every row has 13 sts.

You now have 75 fan rows: 38 teal (Rows 2, 4, 6 … 76) and 37 cream (Rows 3, 5 … 75). Fasten off CC, leaving a 6 in (15.2 cm) tail.

Row 77 (sc row, MC): Ch 1, sc in each st across. (13 sc) Don’t fasten off.

The strip body now measures 3.25 in x 75.5 in (8.3 cm x 191.8 cm).

Strip B (cream border, cream end fans)

Work exactly like Strip A with the colors swapped: MC = cream and CC = teal. The foundation, Rows 1 and 2, every even fan row, and Row 77 are cream. The odd fan rows are teal. Stitch counts and measurements are the same as Strip A.

Make All Pieces

Make 3 of each strip:

  • Strip A, 3 strips: Teal for the foundation, Rows 1 and 77, 38 fan rows, and the border. Cream for 37 fan rows.
  • Strip B, 3 strips: Cream for the foundation, Rows 1 and 77, 38 fan rows, and the border. Teal for 37 fan rows.

Each color makes 3 borders, 114 fan rows (3 x 38), and 111 fan rows (3 x 37), so both colors use almost the same amount of yarn.

Layout, seen from the room side, left to right:

|  A   |  B    |  A   |  B    |  A   |  B    |
| teal | cream | teal | cream | teal | cream |

Each strip is 4.25 in (10.8 cm) wide, with a 0.5 in (1.3 cm) gap between neighboring strips.

Joining (Hanging the Strips)

The strips are never sewn or crocheted together. Keeping them separate lets people walk through the doorway, and each strip hangs straight without pulling on the others. The only connection is each strip’s hanging loop, which is built into the top border (see Round 2 and the Loop Finish).

Stitch logic: The loop is anchored at the exact center of the top edge, the 9th of the 17 top stitches in Round 2. That makes the strip hang straight with the fans level.

Tension: Keep the loop chains snug and even. A loose loop slides on the rod and lets the strip twist.

Hanging: Slide the loops onto the rod in A-B-A-B-A-B order. Space them so there is 0.5 in (1.3 cm) between the edges of neighboring strips.

Size checkpoint: 6 x 4.25 in = 25.5 in (64.8 cm), plus 5 gaps x 0.5 in = 2.5 in (6.4 cm), for a total of 28 in (71.1 cm). For a wider doorway, add strips in pairs or make the gaps slightly wider.

Border

Border gauge: 4 sc per 1 in (2.5 cm) along every edge, which matches the main gauge. Work the border in each strip’s MC: teal for Strip A, cream for Strip B.

Round 1: Continuing from Row 77, turn. Ch 1, then work:

  • Top edge: 3 sc in first st (corner), sc in next 11 sts, 3 sc in last st (corner).
  • First long side: 4 sc in the end of each fan row, working over the carried strands. (300 sc) The corner groups cover the ends of Rows 77 and 1.
  • Bottom edge: Working into the 13 loops on the underside of the foundation chain, 3 sc in first loop (corner), sc in next 11 loops, 3 sc in last loop (corner).
  • Second long side: 4 sc in the end of each fan row. (300 sc)

Join with sl st to first sc.

Count: 626 sts worked one per stitch or row end (13 + 300 + 13 + 300), plus 8 extra corner sts = 634 sc. Counting both corner sts, each short side has 15 and each long side has 304.

Round 2: Ch 1, sc in each st around, with 3 sc in each corner st (the center sc of each 3-sc group). On the top edge, find the center stitch, which is the 9th of the 17 top stitches counting both corners. Sc in it, ch 14, then continue with sc in the next st. Join with sl st to first sc.

Count: 634 sts worked one per stitch, plus 8 extra corner sts = 642 sc, plus the ch-14 loop. Counting both corner sts, each short side has 17 and each long side has 306.

Loop Finish: Sl st into one base of the ch-14 loop. Work 20 sc into the loop, then sl st into the sc at the other base. Fasten off and weave in all ends.

Why the math works: Each long side covers 75 fan rows that are 1 in tall, so 75 in x 4 sc = 300 sc lies flat. Each short side has 13 sts across 3.25 in, which is exactly 4 sc per inch. Each corner gets 2 extra sts per round, so the corners turn square without cupping. Each sc round adds 0.25 in (0.6 cm), so the border adds 0.5 in (1.3 cm) per side. That takes the strip from 3.25 x 75.5 in to 4.25 x 76.5 in (10.8 x 194.3 cm).

Final Blocking

  1. Weave all ends into the border sc, not through the open fans.
  2. Soak each strip in cool water, press out the water in a towel, and don’t wring.
  3. Lay the strip on mats or a towel. For a strip this long, block it in two or three sections, moving along as each section dries.
  4. Pin the border straight to 4.25 in (10.8 cm) wide. Spread each fan so the spokes fan out evenly and the fan sits centered over the one below.
  5. Check the length: 76.5 in (194.3 cm). Cotton stretches as it hangs, so block to this length without pulling it longer.
  6. Shape the hanging loop into a neat teardrop and let everything dry completely.
  7. Hang one strip for 24 hours and measure it again before you hang all six.

Final Quality-Control Checklist

  • Every fan row has 13 sts: 2 edge tr + 11 dc.
  • The fans are stacked directly on top of each other and centered.
  • The colors switch every row, and each strip starts and ends with an MC fan.
  • Strip A has 38 teal and 37 cream fan rows. Strip B is the reverse.
  • Border Round 1 has 634 sc and Round 2 has 642 sc.
  • No carried strands show along the sides.
  • The loop is centered on the 9th of the 17 top stitches.
  • Each strip measures 4.25 x 76.5 in (10.8 x 194.3 cm).
  • All six strips are within 0.5 in (1.3 cm) of the same length.

Troubleshooting

Fans drift sideways: The Fan went into the wrong dc. Skip 5 dc and work the Fan into the 6th, center dc.

Edges ruffle: You worked more than 4 border sc per fan row. Keep exactly 4.

Edges pull in or curve: The carried strands are too tight. Loosen each one before you start a row, or work the border with a hook one size larger.

Strips are different lengths: Count the rows first. If the counts match, block the shorter strips slightly longer.

Loop stretches over time: Work 22 sc into the loop instead of 20 for a firmer cover.

The yarn is at the wrong edge: You turned when you shouldn’t have, or didn’t turn when you should have. Go back to the color rule: start each row at whichever edge the yarn is waiting.

Care

Hand wash in cool water with mild soap, roll in a towel to remove water, and dry flat. Block again if the strips get longer over time.

Crochet strips with alternating teal and cream fan-stitch pattern hanging decoratively in a wooden doorway with plants visible behind.

Final Notes

Here’s how the measurements add up. Thirteen stitches make each strip 3.25 in (8.3 cm) wide. Seventy-five fan rows at 1 in (2.5 cm) each, plus two sc rows, make it 75.5 in (191.8 cm) long. The two-round border adds 0.5 in (1.3 cm) on each side, for 4.25 x 76.5 in (10.8 x 194.3 cm) per strip. Six strips with five 0.5 in (1.3 cm) gaps make a 28 in (71.1 cm) curtain. Check your gauge and count every fan, and the curtain will hang straight and even.

Happy crocheting!

Leave a Comment