Lavender Lace Blossom Coaster Crochet Pattern

This coaster is a small round lace piece with a soft, vintage-garden look. A five-petal lavender flower sits in the center. A ring of chain loops surrounds it, then five smaller “floating” flowers set in an open mesh. A narrow cream edge with a twisted texture frames the whole thing.

The colors are simple: lavender for the lace body and cream for the border. The cream edge outlines the circle and gives the openwork a clean finish, so the coaster looks good on wood, linen, or a painted table.

The pattern uses US crochet terms. The finished coaster is 4.5 in (11.4 cm) across after blocking. It is a good project if you want to practise working into chain spaces, making clusters, and keeping lace flat.

The coaster is one piece worked in the round. Rounds 1–3 make the center flower. Rounds 4–5 add the chain-loop rings. Round 6 adds the five mini flowers, and Round 7 anchors them in place. Rounds 8–9 are the cream border. Nothing is sewn or joined.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) diameter
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Fingering (#1 super fine) cotton
  • Hook: 2.5 mm (US B-1)
  • Number of pieces: 1
  • Layout: Single round motif, worked in continuous joined rounds
  • Piece size before border: 4 in (10.2 cm) diameter after Round 7
  • Border depth: 0.25 in (0.6 cm), 2 rounds
  • Piece size with border: 4.5 in (11.4 cm)

Materials

Yarn: Use a smooth mercerized cotton in fingering weight. Cotton handles heat and moisture well, and mercerized yarn shows off clusters and chain loops crisply. Avoid fuzzy or very stretchy yarns, because lace made with them loses its definition.

  • Color A, Lavender: 10 g, about 42 m
  • Color B, Cream: 4 g, about 17 m

These amounts are for one coaster. They already include a small margin for your gauge swatch and for weaving in ends.

Tools:

  • 2.5 mm (US B-1) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker
  • Blocking mat and rustproof pins
  • Spray bottle with clean water

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sk – skip
  • sp – space
  • st(s) – stitch(es)
  • MR – magic ring
  • rev sc – reverse single crochet (crab stitch)

Special stitches:

  • 2-dc cluster (2dc-cl): [Yarn over, insert hook in the stitch or space, pull up a loop, yarn over, pull through 2 loops] twice. You now have 3 loops on the hook. Yarn over and pull through all 3.
  • Mini Flower (MF): Ch 4, then sl st in the 4th ch from the hook to make a small ring. Work [ch 2, 2dc-cl in the ring, ch 2, sl st in the ring] 5 times. This makes 5 petals. Number them 1 to 5 in the order you made them. Petals 1 and 5 sit beside the chain stems, and petals 2, 3 and 4 face outward.
  • Standing sc: Start with a slip knot on the hook, insert the hook into the stitch, and work a sc as usual.
  • Rev sc: Work single crochet from left to right (right-handed). Insert the hook into the next stitch to the right, pull up a loop, yarn over, and pull through both loops.

Gauge and Checkpoints

Gauge is not critical for a coaster, but it does control the finished size and how flat the piece lies. Make one coaster first and measure it at each checkpoint before you make a full set.

Border gauge: 7 sc and 8 rounds = 1 in (2.5 cm) in Color B.

Checkpoints (measured lightly flattened, before blocking):

  • After Round 3: 1.5 in (3.8 cm)
  • After Round 4: 2.25 in (5.7 cm)
  • After Round 5: 2.75 in (7.0 cm)
  • After Round 6: 3.5 in (8.9 cm)
  • After Round 7: 4 in (10.2 cm)
  • After Round 9: 4.5 in (11.4 cm)

If it’s too big: Go down to a 2.25 mm hook, or tighten the chain loops. Loose chains are the most common cause of extra size.

If it’s too small or cupping: Go up to a 2.75 mm hook, or loosen your chains slightly.

Small differences of 0.125 in (0.3 cm) usually even out in blocking.

Purple crocheted flowers with cream border arranged in lacy pattern on weathered wooden surface.

Pattern: Center Flower

Round 1 (A): Make a MR. Ch 1 and work 10 sc in the ring. Join with a sl st to the first sc and pull the ring closed. (10 sc)

Round 2: Ch 1. Sc in the next st, ch 3, sk 1 st. Work from * 5 times in total, then join with a sl st to the first sc. (5 sc, 5 ch-3 sps)

Round 3: Sl st into the first ch-3 sp. In each ch-3 sp, work (sc, hdc, 3 dc, hdc, sc). Join with a sl st to the first sc. (5 petals, 7 sts each = 35 sts)

The center flower is done. It should measure 1.5 in (3.8 cm).

Pattern: Chain-Loop Rings

Round 4: Sl st in the next hdc, then sl st in the next 2 dc, so you are at the center dc of the first petal. Ch 1.

Sc in the center dc of the petal, ch 5, then sc around the Round 2 sc between this petal and the next one, ch 5. Work from * 5 times in total. Join with a sl st to the first sc. (10 sc, 10 ch-5 loops)

Each petal now has one loop anchored at its tip and one between it and the next petal. This makes the ring of 10 loops around the center flower. Checkpoint: 2.25 in (5.7 cm).

Round 5: Sl st in the first 2 ch of the next ch-5 loop. Ch 1, sc in the same loop, then ch 6. Sc in the next ch-5 loop, ch 6. Repeat from * 8 more times, for 10 sc in total. Join with a sl st to the first sc. (10 sc, 10 ch-6 loops)

Checkpoint: 2.75 in (7.0 cm). The loops should lie flat without pulling the center flower.

Pattern: Mini Flower Ring

Round 6: Sl st in the first 3 ch of the next ch-6 loop. Ch 1.

Sc in this ch-6 loop, ch 3, make 1 MF, ch 3, sc in the next ch-6 loop, ch 5. Work from * 5 times in total, moving to the next ch-6 loop for each repeat. Join with a sl st to the first sc and fasten off A. (10 sc, 10 ch-3 stems, 5 MF, 5 ch-5 sps)

The repeat uses 2 loops at a time, so 5 repeats use all 10 loops from Round 5. Each mini flower floats over the Round 5 sc between its two loops. Before moving on, gently turn each MF so its petals lie flat and face outward. Checkpoint: 3.5 in (8.9 cm).

Round 7 (A): This round anchors the flowers and evens out the circle. Join A with a standing sc in the top of petal 2 of any MF.

Ch 4, sc in the top of petal 3, ch 4, sc in the top of petal 4, ch 6, sc in the center of the next ch-5 sp, ch 6, sc in the top of petal 2 of the next MF. Repeat from * 4 more times. On the last repeat, leave out the final sc and join with a sl st to the first sc instead. Fasten off A. (20 sc, 10 ch-4 sps, 10 ch-6 sps)

Per section (one MF plus the mesh after it): 4 sc, 2 ch-4 sps, 2 ch-6 sps.

Checkpoint: 4 in (10.2 cm). This is your size before the border.

Border

Border gauge: 7 sc and 8 rounds = 1 in (2.5 cm).

Round 8 (B, conversion round): Join B with a standing sc in any sc on petal 2. Then work around:

  • 1 sc in each sc
  • 3 sc in each ch-4 sp
  • 4 sc in each ch-6 sp

Join with a sl st to the first sc.

Count: (20 sc worked 1 into each existing sc) + (30 sc in ch-4 sps + 40 sc in ch-6 sps = 70 added sc) = 90 sc

Per section: 4 + 6 + 8 = 18 sc, and 5 sections × 18 = 90 sc.

Round 9 (B): Ch 1. Do not turn. Work rev sc in each st around and join with a sl st to the first st. (90 rev sc) Fasten off and weave in the ends.

Per section: 18 rev sc.

Why the math works: After Round 7 the coaster measures 4 in (10.2 cm). Round 8 sits about 0.125 in (0.3 cm) further out, so its middle line is at roughly 4.125 in (10.5 cm) across. The circumference there is 3.1416 × 4.125 = 12.96 in (32.9 cm). At 7 sc per in, that needs 90.7 stitches, so 90 sc lies flat. Rev sc has a natural twist and slight stretch, so it can wrap the outer edge on the same 90 stitches without ruffling. The 2 rounds add 0.25 in (0.6 cm) on every side, so 4 in + 0.25 in + 0.25 in = 4.5 in (11.4 cm).

Final Blocking

  1. Weave in all ends along stitch lines of the same color before blocking. Leave about 0.5 in (1.3 cm) tails to trim afterward.
  2. Pin a 4.5 in (11.4 cm) circle template under a clear sheet, or mark the circle on your blocking mat.
  3. Mist the coaster with water until it is evenly damp but not dripping.
  4. Pin the center flower first, opening each of its 5 petals.
  5. Pin the 5 mini flowers next, spacing them evenly at roughly 72° apart, like the points of a star.
  6. Pin the cream edge to the template every 0.5 in (1.3 cm). Pull the chain loops gently into even, open shapes.
  7. Let it dry completely, at least 4 hours or overnight.
  8. Unpin it and trim the end tails.

Final Quality-Control Checklist

  • The diameter is 4.5 in (11.4 cm), within 0.125 in (0.3 cm).
  • The center flower has 5 even petals and a closed center.
  • Round 4 has 10 loops and Round 5 has 10 loops.
  • There are 5 mini flowers, each with 5 petals, spaced evenly.
  • Petals 2, 3 and 4 of each mini flower are anchored in Round 7.
  • The border has 90 stitches in each round, and the cream edge is unbroken.
  • The coaster lies completely flat with no cupping or ruffling.
  • All ends are woven in and invisible from both sides.

Troubleshooting

Coaster cups (forms a bowl): Your chains are too tight. Redo Rounds 4–7 with looser chains or a 2.75 mm hook.

Edge ruffles: Round 8 has too many stitches, or your tension relaxed in the border. Recount to 90, and work the border with the 2.25 mm hook if needed.

Mini flowers twist or flip: Turn each one face-up before Round 7, and make sure you anchor petals 2, 3 and 4 in that order.

Center hole won’t close: Weave the MR tail through the Round 1 stitches again and pull firmly before securing it.

Rev sc looks lumpy: Pull each loop to the same height, and don’t twist the hook as you work.

Uneven loop sizes: Count every chain. One extra chain per loop adds noticeable size by Round 7.

Care

Hand wash in cool water with a mild detergent, press out the water in a towel, and reshape the coaster to dry flat. Re-pin it to the 4.5 in (11.4 cm) circle if it needs a refresh.

Lavender crochet basket with cream layers beside a white mug on a wooden table in a cozy bedroom.

Final Notes

The size depends on a short chain of checkpoints. The center flower is 1.5 in (3.8 cm) after Round 3 and grows to 2.25 in (5.7 cm) at Round 4, 2.75 in (7.0 cm) at Round 5, 3.5 in (8.9 cm) at Round 6, and 4 in (10.2 cm) at Round 7. The 90-stitch cream border then adds 0.25 in (0.6 cm) all around, for a finished 4.5 in (11.4 cm) coaster. If each checkpoint matches, every coaster in your set will come out the same size.

Happy crocheting!

Leave a Comment