Terracotta Weave Hanging Basket Set Crochet Pattern

This set of three small hanging baskets adds warm, woven texture to a bathroom shelf, vanity wall or craft corner. Each basket has a flat round base, deep basketweave walls and a rolled, corded rim. It hangs from a teardrop-shaped crocheted strap.

All three baskets use one rich rust-terracotta shade. The basketweave texture comes from blocks of front post and back post double crochet. These blocks form alternating vertical and horizontal “strands” that look like woven cane. Brown leather tabs and a plain wooden dowel finish the display.

This pattern uses US crochet terms. Each finished basket is about 5 in (12.7 cm) across the base and 5.75 in (14.6 cm) tall. The hanger rises about 5.5 in (14.0 cm) above the rim.

The construction is simple:
1. Crochet a flat single crochet circle.
2. Turn the base edge up with a back-loop round.
3. Build the walls in joined post-stitch rounds.
4. Attach the hanger strap while you work the first rim round.
5. Finish with a reverse single crochet edge.

Make three baskets and three hangers, then hang them from the dowel with leather tabs.

Finished Size and Construction

  • Finished size (each basket): 5 in (12.7 cm) base diameter x 5.75 in (14.6 cm) tall
  • Skill level: Intermediate (post stitches, working in the round)
  • Terminology: US crochet terms
  • Yarn weight: Bulky (#5), cotton or cotton blend
  • Hook: 6.0 mm (US J-10)
  • Number of crocheted pieces: 6 (3 baskets, 3 hanger straps)
  • Layout: 3 baskets in a row on a 20 in (50.8 cm) dowel, 6.5 in (16.5 cm) apart center to center
  • Piece size: 48 stitches around, 16 in (40.6 cm) circumference
  • Size before border: 4.75 in (12.1 cm) wall height after Round 18
  • Border (rim) depth: 1 in (2.5 cm)

Materials

Choose a bulky cotton or cotton-blend yarn with good stitch definition. Cotton holds the basket shape better than acrylic and shows the post-stitch texture crisply. Avoid fuzzy or brushed yarns, which blur the weave.

  • Rust / terracotta: 160 g, about 220 m (240 yd) total for 3 baskets and 3 hangers

Each basket uses about 53 m (58 yd) and each hanger about 6 m (7 yd). The total includes a margin of roughly 15% for gauge testing and weaving in ends.

Tools and hardware:

  • 6.0 mm (US J-10) crochet hook
  • Locking stitch markers (at least 4)
  • Tapestry needle
  • Scissors and a flexible tape measure
  • 3 leather tabs, 1 in (2.5 cm) wide x 6 in (15.2 cm) long, with rivets or snaps
  • 1 wooden dowel, 3/4 in (1.9 cm) diameter x 20 in (50.8 cm) long
  • 2 wall hooks or screws for the dowel

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • FPdc – front post double crochet
  • BPdc – back post double crochet
  • rev sc – reverse single crochet
  • MR – magic ring
  • st(s) – stitch(es)

Special stitches:

  • FPdc: Yarn over and insert the hook from front to back to front around the post of the stitch below. Yarn over and pull up a loop, then [yarn over, pull through 2 loops] twice.
  • BPdc: Yarn over and insert the hook from back to front to back around the post of the stitch below. Finish as a dc.
  • Rev sc: Work from left to right (if you are right-handed). Insert the hook into the next stitch to the right and pull up a loop. Yarn over and pull through both loops. This makes a corded edge.

Gauge and Checkpoints

Make one complete basket before you start the others. It is your real gauge swatch.

  • Single crochet gauge: 12 sc and 12 rounds = 4 in (10.2 cm)
  • Basketweave gauge: 12 sts and 8 rounds = 4 in (10.2 cm)

Checkpoints:

  1. After Round 8 (base): 48 sts, about 5 in (12.7 cm) across.
  2. After Round 10: the walls stand upright, about 0.75 in (1.9 cm) above the base.
  3. After Round 18: the walls are 4.75 in (12.1 cm) tall and the circumference is still 16 in (40.6 cm).
  4. After Round 21 (rim): total height is 5.75 in (14.6 cm).
  5. Hanger strap: 13 in (33.0 cm) long and 1 in (2.5 cm) wide.

If your base is larger than 5.25 in (13.3 cm), go down to a 5.5 mm hook. If it is smaller than 4.75 in (12.1 cm), go up to a 6.5 mm hook. Keep the stitch counts the same and change only the hook.

A rust-colored crocheted fabric hangs from a wooden rod via a brown leather strap fastened with a brass rivet.

Basket Base

Work in joined rounds. Start each round with ch 1 (does not count as a stitch). Join each round with a sl st to the first sc.

Rnd 1: Make a MR, 6 sc in ring. (6 sts)

Rnd 2: Inc in each st around. (12 sts)

Rnd 3: Sc 1, inc 6 times. (18 sts)

Rnd 4: Sc 2, inc 6 times. (24 sts)

Rnd 5: Sc 3, inc 6 times. (30 sts)

Rnd 6: Sc 2, inc, sc 2 6 times. (36 sts)

Rnd 7: Sc 5, inc 6 times. (42 sts)

Rnd 8: Sc 3, inc, sc 3 6 times. (48 sts)

Rounds 6 and 8 stagger the increases so the circle stays round instead of turning into a hexagon. Pull the MR tight and lay the base flat. It should be about 5 in (12.7 cm) across.

Basket Walls

Rnd 9 (turning round): Ch 1, sc in BLO of each st around, join. (48 + 0 = 48 sts)

The unused front loops form a neat ridge around the base edge, and the walls now turn upward.

Rnd 10 (foundation round): Ch 2 (does not count), dc in each st around, join to first dc. (48 + 0 = 48 sts)

This round gives the post stitches something to wrap around.

Rnd 11: Ch 2 (does not count), FPdc 4, BPdc 4 6 times, join to first FPdc. (48 sts: 24 FPdc, 24 BPdc)

Rnd 12: Repeat Rnd 11, working FPdc around FPdc and BPdc around BPdc. (48 sts)

Rnd 13: Ch 2, BPdc 4, FPdc 4 6 times, join. (48 sts)

Rnd 14: Repeat Rnd 13. (48 sts)

Rnds 15–16: Repeat Rnd 11 twice. (48 sts each round)

Rnds 17–18: Repeat Rnd 13 twice. (48 sts each round)

You now have 4 tiers of blocks. Each block is 4 sts wide and 2 rounds tall, with 6 repeats around. The blocks swap position on every tier to create the woven checkerboard. The wall should be 4.75 in (12.1 cm) tall from the base ridge. Do not fasten off. Put the working loop on a locking marker and make the hanger.

Hanger Strap

Foundation: Ch 40.

Row 1: Sc in 2nd ch from hook and in each ch across, turn. (39 sts)

Rows 2–3: Ch 1, sc in each st across, turn. (39 sts each row)

Fasten off, leaving a 10 in (25.4 cm) tail. The strap is 13 in (33.0 cm) x 1 in (2.5 cm). Fold it in half without twisting. It falls naturally into a teardrop loop with both ends meeting at the narrow point.

Make All Pieces

Repeat the base, walls and hanger until you have:

  • Rust / terracotta: 3 baskets (worked through Round 18)
  • Rust / terracotta: 3 hanger straps

Measure each basket against the first one. All three should match within 1/4 in (0.6 cm).

Hanging layout (front view):

|---3.5 in---|-----6.5 in-----|-----6.5 in-----|---3.5 in---|
=============[tab]============[tab]============[tab]=========
               |                |                |
             [B1]             [B2]             [B3]

The tabs sit 3.5 in (8.9 cm) from each end of the dowel and 6.5 in (16.5 cm) apart. With 5 in (12.7 cm) baskets, this leaves a 1.5 in (3.8 cm) gap between neighbors.

Joining (Hanger to Basket)

You join each hanger directly into the first rim round, so no sewn seam shows on the outside.

Placement: Place marker A on st 1 of Round 18 and marker B on st 17. This puts the hanger ends 16 sts apart, exactly 4 blocks, so they line up with the weave. The front span between the ends is sts 4–16 (13 sts) and the back span is sts 20–48 (29 sts). Check: 3 + 13 + 3 + 29 = 48.

Positioning: Hold one strap end inside the basket so it overlaps the inner wall by 1/2 in (1.3 cm), centered on sts 1–3. Hold the other end on sts 17–19 the same way. Make sure the strap is not twisted.

Stitch-to-stitch logic: The strap is 3 rows wide, so its end has 3 row-ends. Each row-end matches 1 basket stitch. In Rnd 19 you work 3 sc through both layers at each hanger position. That makes 3 + 3 = 6 joining sts, and no extra stitches are added.

Tension: Keep the joining sc the same height as the surrounding sc. If you pull them tight, the rim will dip at the hanger points.

Checkpoint: After Rnd 19, hold the basket up by the hanger. It should hang level, with the top of the hanger about 5.5 in (14.0 cm) above the rim.

Border (Rim)

Border gauge: 12 sc = 4 in (10.2 cm), the same as the base. The rim stays at 48 sts, so its circumference matches the 16 in (40.6 cm) walls.

Rnd 19 (joining round):
1. Take the working loop off its marker and ch 1.
2. Sc in sts 1–3, working through both the basket st and the strap end. Insert the hook under both loops of the st, then through the strap 1/4 in (0.6 cm) from its end.
3. Sc in sts 4–16.
4. Sc in sts 17–19 through both layers, the same way.
5. Sc in sts 20–48 and join.

(48 + 0 = 48 sts: 3 joined + 13 front + 3 joined + 29 back)

Rnd 20: Ch 1, sc in each st around, join. (48 sts: 3 + 13 + 3 + 29)

Rnd 21: Ch 1, rev sc in each st around, join. (48 sts)

Fasten off. Use the strap tails to whipstitch the lower edge of each strap end to the inside wall for extra strength. Weave in all ends.

Why the math works: The walls are straight, so the stitch count must not change. Every round from Round 8 to Round 21 has 48 sts. The strap ends are caught in existing stitches rather than added as new ones, so the rim stays exactly 16 in (40.6 cm) around. The two sc rounds add about 2/3 in (1.7 cm) and the rev sc adds about 1/3 in (0.8 cm), for a 1 in (2.5 cm) rim. The 4.75 in (12.1 cm) wall plus the rim gives 5.75 in (14.6 cm).

Final Blocking

  1. Mist each basket lightly with water until damp, not wet.
  2. Stuff it firmly with a rolled towel or slip it over a 5 in (12.7 cm) jar.
  3. Press the base flat against the table and shape the base ridge into a crisp edge.
  4. Straighten the blocks so the vertical strands stand upright and the horizontal strands lie level.
  5. Roll the rim slightly outward with your fingers.
  6. Lay each hanger flat and ease it gently to 13 in (33.0 cm).
  7. Let everything dry completely, at least 24 hours.
  8. Fold the leather tabs over the dowel, thread each one through the top of a hanger and fasten it.

Final Quality-Control Checklist

  • Each base is about 5 in (12.7 cm) across and lies flat.
  • Each basket has 48 sts in every round from Round 8 to Round 21.
  • There are 4 tiers of blocks with 6 repeats around, and the checkerboard is unbroken.
  • The walls are 4.75 in (12.1 cm) tall and the total height is 5.75 in (14.6 cm).
  • The hanger ends are 16 sts apart and hidden inside.
  • Each basket hangs level.
  • All three baskets match within 1/4 in (0.6 cm).
  • All ends are woven in securely.

Troubleshooting

Base ruffles: Your tension is loose. Go down a hook size, and check that you have exactly 6 increases per round.

Base cups before Round 9: You missed increases. Count each round.

Walls flare out: You probably added a stitch at a join. Count to 48 and make sure you did not work into the ch 2.

Blocks drift diagonally: The join is shifting. Always join into the first post st, not the ch 2.

Weave looks flat: In the second round of each tier, make sure FPdc wraps around FPdc and BPdc wraps around BPdc.

Basket tilts when hung: The hanger ends are not 16 sts apart, or one end overlaps more than the other. Remove the strap and reposition it.

Rim dips at the hanger: Loosen the joining sc in Rnd 19.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and reshape over a jar to dry. Wipe the leather tabs with a damp cloth only.

Rust-orange crocheted baskets hang from a wooden rod, holding brushes and combs above a green plant in a bright bathroom.

Final Notes

Here is the measurement chain:
– The 48-st base is about 5 in (12.7 cm) across.
– The walls keep 48 sts and reach 4.75 in (12.1 cm).
– The 1 in (2.5 cm) rim brings the total to 5.75 in (14.6 cm).
– The 13 in (33.0 cm) hanger joins 16 sts apart.

If the first basket hits every checkpoint, the other two will match. Hang them 6.5 in (16.5 cm) apart and fill them with brushes, combs or small bottles.

Happy crocheting!

Leave a Comment