Winter Poinsettia Hexagon Coaster Set Crochet Pattern

This set has six solid cream hexagon coasters and a matching hexagonal holder. Each coaster has a burgundy corded border and a layered poinsettia on top: a ring of green leaves, eight pointed burgundy petals and a yellow bobble center. The holder has a U-shaped notch in the front wall, so you can see the stack and lift a coaster out.

The colors are classic holiday ones: warm cream, deep burgundy, pine green and soft gold. The set looks traditional but neat, so it can stay on a coffee table all season.

This pattern uses US crochet terms. Each finished coaster measures 4.5 in (11.4 cm) from flat side to flat side and 5.2 in (13.2 cm) from point to point. The holder base measures 5.2 in (13.2 cm) from flat side to flat side, and the walls are about 2.7 in (6.9 cm) tall.

You work the coasters in joined rounds of double crochet and then add two border rounds in burgundy. You make the flower layers separately and sew them on. The holder starts as a hexagon like the coasters. Then you turn it up into single crochet walls, work the notch in rows and finish with the same corded edging.

Finished Size and Construction

  • Coaster size: 4.5 in (11.4 cm) flat side to flat side; 5.2 in (13.2 cm) point to point
  • Holder size: 5.2 in (13.2 cm) base, flat side to flat side; walls 2.7 in (6.9 cm) tall
  • Skill level: Easy intermediate
  • Terminology: US
  • Yarn weight: Medium worsted (#4)
  • Hooks: 5.0 mm (H-8) for the main pieces; 4.5 mm (US 7) for the appliqués
  • Number of pieces: 7 main pieces (6 coasters + 1 holder) plus their appliqués
  • Layout: Separate pieces; the coasters stack inside the holder
  • Coaster size before border: 4 in (10.2 cm) flat side to flat side
  • Border depth: 0.25 in (0.6 cm) on each edge

Materials

Use a smooth cotton or cotton-blend worsted yarn. Cotton soaks up drips and doesn’t melt under a hot mug. Fuzzy yarn hides the stitch definition, so avoid it.

  • Cream: 80 g, about 160 m
  • Burgundy: 60 g, about 120 m
  • Green: 25 g, about 50 m
  • Yellow/gold: 8 g, about 16 m

Tools: 5.0 mm (H-8) and 4.5 mm (US 7) hooks, tapestry needle, 4 stitch markers, sewing pins, scissors, blocking mat and rust-proof pins.

These quantities include a margin of about 15% for swatching and weaving in ends.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sp – space
  • st(s) – stitch(es)
  • BLO – back loop only
  • rev sc – reverse single crochet (crab stitch): working from left to right, insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, then pull through both loops
  • puff – (yarn over, insert the hook in the stitch, yarn over, pull up a loop) 3 times, yarn over, pull through all 7 loops on the hook
  • standing sc – with a slip knot on the hook, insert the hook into the stitch and complete a sc

Gauge and Checkpoints

Make one complete coaster before you start the rest of the set.

Gauge: With the 5.0 mm hook, Rounds 1–5 of the coaster measure 4 in (10.2 cm) flat side to flat side. For the walls, 18 sc and 20 rows = 4 in (10.2 cm).

Measure from flat side to flat side after each round:

  • Round 1: 0.8 in (2.0 cm)
  • Round 2: 1.6 in (4.1 cm)
  • Round 3: 2.4 in (6.1 cm)
  • Round 4: 3.2 in (8.1 cm)
  • Round 5: 4 in (10.2 cm)
  • After the border: 4.5 in (11.4 cm)

If your hexagon is too big, go down 0.5 mm in hook size. If it’s too small, go up 0.5 mm. A rippling hexagon also means you should go down a hook size, and a cupping one means you should go up.

Crocheted burgundy poinsettia with gold stamen and green leaves on cream square, resting on warm wood surface.

Coaster Base (Make 6)

With cream and the 5.0 mm hook:

Round 1: Make a magic ring. Ch 3 (counts as dc), dc in the ring, ch 2. Work 2 dc in the ring, ch 2; repeat from * 4 more times. Sl st to the top of the beginning ch-3. (12 dc, 6 ch-2 sps)*

Round 2: Sl st in the next dc and into the ch-2 sp. Ch 3 (counts as dc), then (ch 2, dc) in the same sp. Dc in each of the next 2 dc, (dc, ch 2, dc) in the next ch-2 sp; repeat from * 4 more times. Dc in the last 2 dc and sl st to the top of the ch-3. (24 dc; 4 per side)*

From here on, a “side” means the dc between two corner spaces, including both corner dc.

Round 3: Sl st into the corner sp. Ch 3, then (ch 2, dc) in the same sp. Dc in each dc to the next corner sp, (dc, ch 2, dc) in the corner sp; repeat from * around. Dc in each remaining dc and join. (36 dc; 6 per side)*

Round 4: Repeat Round 3. (48 dc; 8 per side)

Round 5: Repeat Round 3. (60 dc; 10 per side) Fasten off. Checkpoint: 4 in (10.2 cm).

Coaster Border

For the border gauge, work 1 sc per dc along each side. The 2 corner sc on each side are worked into the corner sp.

Round 6: Join burgundy with a standing sc in any corner ch-2 sp. Ch 1, sc in the same sp. Sc in each of the next 10 dc, (sc, ch 1, sc) in the next corner sp; repeat from * 4 more times. Sc in the last 10 dc and sl st to the first sc. (72 sc = 60 sc over the dc + 12 corner sc; 12 sc per side including corners; 6 ch-1 sps)*

Round 7: Ch 1. Work 1 rev sc in each sc and 1 rev sc in each ch-1 sp. Sl st to the first st and fasten off. (78 rev sc = 72 worked 1 per st + 6 corner sts)

Why the math works: The 10 dc on each side give exactly 10 sc, and each corner adds 1 sc for each side plus a ch-1. On Round 7, the extra stitch at each corner lets the cord turn without pulling. The border adds 0.25 in (0.6 cm) on each side, so the coaster grows from 4 in to 4.5 in (10.2 cm to 11.4 cm).

Poinsettia Appliqué (Make 6 Sets)

Use the 4.5 mm hook for all appliqués. The tighter fabric gives you crisper points.

Leaf layer (green):

Rnd 1: Make a magic ring. Ch 1 and work 6 sc in the ring. Sl st to the first sc. (6 sc)

Rnd 2: Ch 9, sl st in the 2nd ch from the hook, sc in the next ch, hdc in the next ch, dc in each of the next 2 ch, hdc in the next ch, sc in the next ch, sl st in the last ch, sl st in the next sc of the ring; repeat from * 5 more times. (6 leaves)*

Fasten off and leave a 12 in (30.5 cm) tail. The leaf layer is about 3.5 in (8.9 cm) across, and each leaf is about 1.5 in (3.8 cm) long.

Flower layer (burgundy):

Rnd 1: Make a magic ring. Ch 1 and work 8 sc in the ring. Sl st to the first sc. (8 sc)

Rnd 2: Ch 10, sl st in the 3rd ch from the hook to make the pointed tip, sc in the next ch, hdc in the next ch, dc in each of the next 2 ch, hdc in the next ch, sc in the next ch, sl st in the last ch, sl st in the next sc of the ring; repeat from * 7 more times. (8 petals)*

Fasten off and leave a 12 in (30.5 cm) tail. The flower is about 3.4 in (8.6 cm) across, and each petal is about 1.4 in (3.6 cm) long.

Center (yellow):

Rnd 1: Make a magic ring. Ch 1 and work 6 sc in the ring. Sl st to the first sc. (6 sc)

Rnd 2: Puff in the next sc, ch 1; repeat from * 5 more times. Sl st to the first puff. (6 puffs)* Fasten off. The center is about 0.6 in (1.5 cm) across.

Holder

Base: With cream and the 5.0 mm hook, work Coaster Rounds 1–5, then continue:

Round 6: Repeat Round 3. (72 dc; 12 per side) Checkpoint: 4.8 in (12.2 cm).

Round 7: Ch 1. Sc in each dc and 2 sc in each corner ch-2 sp. Join. (84 sc = 72 worked 1 per dc + 12 corner sc; 14 per side) Checkpoint: 5.2 in (13.2 cm). Fasten off.

Pick one side to be the front. On that side, the first 2 and last 2 sts are the shoulders. Mark the center 10 sts as the notch.

Walls:

Round 8: Join cream with a standing sc in the BLO of the first notch st. Sc in the BLO of each st around and sl st to the first sc. (84 sc) The base folds up along the unused front loops.

Rounds 9–13: Ch 1. Sc in each sc around and join. (84 sc) Don’t fasten off.

In each round, sts 1–10 are the notch sts and sts 11–84 are the sts you’ll work in rows.

Row 14: Ch 1 and turn. Sc in st 84 and in each st back to st 11, leaving sts 1–10 unworked. (74 sc)

Rows 15–19: Ch 1, turn, sc in each sc across. (74 sc) Fasten off.

The walls are now 12 rows tall, which is 2.4 in (6.1 cm). The notch is 10 sts, or 2.2 in (5.6 cm), wide and 6 rows, or 1.2 in (3.0 cm), deep. Each shoulder is 0.4 in (1.0 cm) wide.

Edging:

Edging Round 1: Join burgundy at a top corner of the notch. Work 74 sc across Row 19, 6 sc down the row ends of the notch, 10 sc in the unworked notch sts of Round 13, and 6 sc up the other side. Join. (96 sc)

Edging Round 2: Ch 1. Rev sc in each sc and join. (96 rev sc) Fasten off. The finished wall height is 2.7 in (6.9 cm).

Base line: Hold burgundy behind the work and sl st through each free front loop of Round 7. (84 sl st)

Mini poinsettias (make 2, burgundy): Make a magic ring. Ch 1 and work 6 sc in the ring, then join. Ch 7, sl st in the 3rd ch from the hook, then sc, hdc, sc and sl st in the last 4 ch, sl st in the next ring sc; repeat from * 5 more times. (6 petals; about 2 in / 5.1 cm across)*

Mini leaves (make 4, green): Ch 6, sl st in the 2nd ch from the hook, then sc, hdc, sc and sl st in the last 4 ch.

Mini centers (make 2, yellow): Make a magic ring and work 5 sc in it. Pull the ring closed and fasten off.

Make All Pieces

  • Cream: 6 coaster bases and 1 holder
  • Burgundy: 6 borders, 6 flower layers, the holder edging and 2 mini poinsettias
  • Green: 6 leaf layers and 4 mini leaves
  • Yellow: 6 bobble centers and 2 mini centers

Set layout (the pieces are not joined):

Coasters:  [C1] [C2] [C3]
           [C4] [C5] [C6]
Holder:    [H]  front wall = notch
           mini flower on each side panel next to the notch

Assembly (Sewing the Appliqués)

The coasters stay separate. Only the appliqué layers get sewn on.

  1. Center the leaf layer on the coaster, with 2 leaves pointing at opposite corners.
  2. Lay the flower on top and turn it so the leaves show between the petals.
  3. Pin the yellow center in the middle.
  4. Whipstitch through the ring sts of each layer and into the cream dc below. Then tack down each petal tip and leaf tip with 1 small stitch.

On the holder, sew 2 mini leaves and a mini poinsettia to each wall panel next to the front. Center each flower 1.3 in (3.3 cm) above the base line.

Tension: Keep your stitches snug but not tight, or the coaster will pucker. Go through only the top layer of the cream fabric so the stitches don’t show on the back.

Checkpoint: The petal tips should sit about 0.3 in (0.8 cm) inside the burgundy border, and the coaster should still lie flat.

Final Blocking

  1. Wet or spray the coasters and holder until they’re damp.
  2. Pin each coaster to 4.5 in (11.4 cm) flat side to flat side, keeping the corners sharp.
  3. Use 2 pins on each petal tip to keep it pointed.
  4. Stuff the holder with a towel so the walls stand straight.
  5. Let everything dry completely before you take out the pins.

Final Quality-Control Checklist

  • [ ] Each coaster is 4.5 in (11.4 cm) flat side to flat side
  • [ ] Round 5 has 60 dc and Round 6 has 72 sc
  • [ ] The coasters lie flat with no ripples or cupping
  • [ ] All flowers are turned the same way
  • [ ] The holder base is 5.2 in (13.2 cm) with 84 sts on Round 7
  • [ ] The notch is centered between two 2-st shoulders
  • [ ] All six coasters slide into the holder easily
  • [ ] All ends are woven in securely

Troubleshooting

The hexagon ripples: Go down a hook size.

The hexagon cups: Go up a hook size and check that every corner has (dc, ch 2, dc).

The corded edge flares: Work the rev sc more tightly.

The petals curl: Steam-block them and pin the tips.

The coasters don’t fit: Check the base checkpoint. If the base is too small, add another sc round to it before you start the walls.

The notch is off-center: Count the front side again: it should be 2 + 10 + 2 sts.

Care

Hand wash in cool water and lay flat to dry. If the corners lose their shape, press lightly from the back under a cloth.

A burgundy and cream crocheted basket with star patterns shown in cozy holiday settings with matching coasters.

Final Notes

Here’s the full measurement chain. Five dc rounds make a 4 in (10.2 cm) hexagon, and the 0.25 in (0.6 cm) border brings each coaster to 4.5 in (11.4 cm). The holder base has one more dc round and one sc round, so it measures 5.2 in (13.2 cm) and leaves room around each coaster. The 2.7 in (6.9 cm) walls hold all six coasters. If each checkpoint matches, the whole set will fit together.

Happy crocheting!

Leave a Comment