This hanging holder has three heart-shaped baskets stacked on one cream mesh strip, so you can keep spare toilet rolls in sight and close to hand. Each basket has a dusty-pink filet mesh wall with a cream pixel heart on the front, a cream scalloped rim and a heart-shaped base trimmed with a pink rope edge.
The palette is soft: dusty rose and natural cream in worsted-weight cotton. The style sits between cottage and farmhouse, and the cotton gives sturdy baskets that hold their shape.
This pattern uses US crochet terms. The finished holder hangs about 26.5 in (67.3 cm) from the top of the heart ring to the bottom edge. Each basket is about 5.5 in (14.0 cm) wide and 5.1 in (13.0 cm) tall.
How it goes together: you crochet three heart bases and three mesh walls, sew each base to a wall, then sew the baskets to the back strip, which loops over a wrapped heart ring. Each basket’s scalloped top edging is worked last, once it is in place.
Finished Size and Construction
- Finished size: about 26.5 in (67.3 cm) long overall; strip 4 in (10.2 cm) wide
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 4.0 mm (G-6)
- Number of pieces: 8 (3 bases, 3 walls, 1 back strip, 1 ring cover)
- Layout: 1 column of 3 baskets
- Piece size: base 5.5 x 5 in (14.0 x 12.7 cm); wall 16 in (40.6 cm) around
- Wall height before border: 4.4 in (11.2 cm)
- Border depth: 0.7 in (1.8 cm), which brings each basket to 5.1 in (13.0 cm) tall
Materials
Use a smooth, firm 100% cotton or cotton blend in worsted weight. Soft acrylic will sag under the weight of the rolls.
- Cream: 120 g / 190 m (bases, wall bands, hearts, scallops, strip)
- Dusty pink: 90 g / 145 m (wall mesh, base trim, ring cover)
Both quantities include a margin of about 20%.
Tools:
– 4.0 mm (G-6) crochet hook
– One 3 in (7.6 cm) heart-shaped metal or acrylic ring
– Stitch markers (at least 4)
– Tapestry needle
– Small yarn bobbin for the cream heart
– Rust-proof pins, blocking mat and spray bottle
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- fsc: foundation single crochet
- inc: 2 sc in the same stitch
- st(s): stitch(es)
- sp: space
- FLO: front loop only
- rev sc: reverse single crochet (crab stitch)
Special stitch: reverse sc. Work from left to right (right-handed). Insert the hook into the next stitch to the right, yarn over, pull up a loop, then yarn over and pull through both loops. Each rev sc makes one twisted, rope-like stitch.
Filet terms. An open mesh is ch 1, skip the ch-1 sp, dc in the next dc. A filled block is a dc worked into the ch-1 sp in place of the ch 1. Each mesh counts as 2 stitches.
Gauge and Checkpoints
- Single crochet: 18 sts and 20 rows = 4 in (10.2 cm)
- Filet mesh: 9 meshes and 8 rows = 4 in (10.2 cm), so each mesh row is 0.5 in (1.3 cm) tall
Test one piece first. Make one base through Round 11. It should measure 4.4 in (11.2 cm) across.
Checkpoints:
– Base after Round 11: 4.4 in (11.2 cm) across
– Finished base: about 5.5 x 5 in (14.0 x 12.7 cm)
– Wall after Round 9: 16 in (40.6 cm) around and 4.4 in (11.2 cm) tall
– Strip after Row 41: 4 in (10.2 cm) wide and 20.2 in (51.3 cm) long
If your piece is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. If the base is the right size but the mesh is not, change hooks for the mesh only. The base and wall must both reach 16 in (40.6 cm) around.

Heart Base (make 3)
Use cream. Work in continuous rounds, moving a marker up each round.
Round 1: 6 sc in a magic ring. (6)
Round 2: Inc in each st around. (12)
Round 3: Sc 1, inc 6 times. (18)
Round 4: Sc 2, inc 6 times. (24)
Round 5: Sc 3, inc 6 times. (30)
Round 6: Sc 4, inc 6 times. (36)
Round 7: Sc 5, inc 6 times. (42)
Round 8: Sc 6, inc 6 times. (48)
Round 9: Sc 7, inc 6 times. (54)
Round 10: Sc 8, inc 6 times. (60)
Round 11: Sc 9, inc 6 times. (66)
Move the increases a few stitches along in alternate rounds so the circle stays round. Checkpoint: 4.4 in (11.2 cm) across.
Number the stitches of Round 11 from 1 to 66. Put marker A in st 1; this is the dip of the heart. Put marker B in st 34, directly across; this is the tip.
Round 12 (shaping, conversion round):
– Sl st in st 1 (the dip)
– Sc in sts 2–3, hdc in sts 4–5
– Dc in sts 6–13, working 2 dc in st 8 and in st 11
– Hdc in sts 14–15, sc in sts 16–33
– (Hdc, dc, hdc) in st 34 (the tip)
– Sc in sts 35–52, hdc in sts 53–54
– Dc in sts 55–62, working 2 dc in st 57 and in st 60
– Hdc in sts 63–64, sc in sts 65–66
– Join with a sl st to the first sl st. This joining sl st does not count. Fasten off.
Count: 66 sts worked once + 6 extra (2 per lobe and 2 at the tip) = 72. The extra dc build up the two rounded lobes, and the stitches at the tip form the point.
Round 13 (pink, conversion round): Join pink with a standing sc in the first sc after the dip. Sc in each st to the tip dc, 2 sc in the tip dc, then sc in each st to the dip. Skip the dip sl st and join to the first sc.
Count: 70 sts worked once + 2 sc in the tip st, with none in the dip = 72.
Round 14 (pink): Working in FLO, rev sc in each st around. (72) Fasten off.
This round makes the raised rope edge. It also leaves the 72 back loops of Round 13 free for joining.
Basket Wall (make 3)
Foundation (cream): 72 fsc. Join into a ring without twisting, with a sl st to the first fsc. (72)
Round 1 (cream): Ch 1, sc in each st around, then join. (72) Change to pink on the final yarn-over of the join.
The join marks the back center of the wall.
Round 2 (pink): Ch 4 (counts as dc + ch 1), skip 1 st. Dc in the next st, ch 1, skip 1 st 35 times. Join to the 3rd ch of the ch-4.
Count: 36 dc + 36 ch-1 sps = 72 sts (36 meshes).
Heart setup: Count 18 ch-1 sps from the start, then place marker C in the next sp (the 19th). It sits directly opposite the join, at the front center.
Rounds 3–9 (turned rounds): Ch 4 (counts as dc + ch 1), turn. Skip the ch-1 sp, dc in the next dc. Ch 1, skip sp, dc in next dc around, finishing with ch 1 and a join to the 3rd ch of the ch-4. Each round stays at 72 sts (36 meshes).
Turning each round means the cream bobbin always waits at the edge of the heart. Use a small cream bobbin for the heart. Fill sps as listed below, counting outward from marker C:
- Round 3: fill C (1 block)
- Round 4: fill C and 1 sp each side (3)
- Round 5: fill C and 2 sps each side (5)
- Round 6: fill C and 3 sps each side (7)
- Round 7: fill C and 3 sps each side (7)
- Round 8: fill the 2nd and 1st sps on each side of C; leave C and the 3rd sps open (4)
- Round 9: all open mesh
Work filled-block dc in cream. If both sps next to a dc post are filled, make that post cream too. Edge posts stay pink.
Change colors on the last yarn-over of the stitch before the change. Carry pink inside the cream dc. Fasten off pink after Round 9.
Checkpoint: 16 in (40.6 cm) around and 4.4 in (11.2 cm) tall (fsc 0.2 in + Round 1 0.2 in + 8 mesh rounds at 0.5 in each).
Back Strip (make 1)
Use cream.
Ch 20.
Row 1: Sc in the 2nd ch from the hook and in each ch across. (19)
Row 2: Ch 4 (counts as dc + ch 1), turn. Skip 1 st, dc in the next st. Ch 1, skip 1, dc in next st across.
Count: 10 dc + 9 ch-1 sps = 19 sts (9 meshes).
Rows 3–41: Ch 4, turn. Skip the sp, dc in the next dc. Ch 1, dc in next dc across, working the last dc in the 3rd ch of the turning ch. (9 meshes)
Checkpoint: 4 in (10.2 cm) wide and 20.2 in (51.3 cm) long.
Row 42 (decrease row): Turn, then sl st into the first ch-1 sp and the next dc. Ch 4, then work in pattern to the second-to-last dc. Leave the last mesh unworked. (7 meshes, 15 sts)
Row 43: Work even. (7 meshes)
Row 44: Work as Row 42. (5 meshes, 11 sts)
Row 45: Work even. (5 meshes)
Row 46: Work as Row 42. (3 meshes, 7 sts)
The taper is 2.5 in (6.4 cm) tall, and the strip now measures 22.7 in (57.7 cm).
Row 47 (tab): Ch 1, turn, sc in each dc and each ch-1 sp. (7)
Rows 48–58: Ch 1, turn, sc in each st. (7)
The tab measures 2.4 in (6.1 cm). Fasten off and leave a 12 in (30.5 cm) tail.
Heart Ring Cover (make 1)
Join pink to the ring. Work sc tightly over the ring until it is fully covered, about 66 sc for a ring perimeter of 9.5 in (24.1 cm). Push the stitches together as you go. Join with a sl st and fasten off.
Make All Pieces
- Cream only: 1 back strip, plus Rounds 1–12 of 3 bases
- Pink with cream: 3 walls (pink mesh, cream bands and heart), plus Rounds 13–14 on 3 bases
- Pink: 1 ring cover
Layout (top to bottom):
[ HEART RING ]
[ TAB ]
/ TAPER \
| BASKET 1 | bottom edge at top of Row 29
| mesh gap |
| BASKET 2 | bottom edge at top of Row 15
| mesh gap |
| BASKET 3 | bottom edge at top of Row 1
Joining
1. Base to wall. Hold the base against the wall’s bottom edge with right sides out. Line up the dip with the back center of the wall. Using cream, whip stitch each wall foundation st to 1 free back loop of base Round 13.
This is 72 sts to 72 sts with nothing added. The rope edge stays outside as piping. The round wall follows the heart outline of the base.
2. Ring and tab. Slip the tab through the ring at its bottom point. Fold 1.2 in (3.0 cm) to the back and whip stitch the 7 sts of Row 58 to the back of Row 47.
3. Baskets to strip. Centered at the back of each wall, the 9 meshes across the back seam are bounded by 10 dc posts. This 4 in (10.2 cm) section matches the strip’s 9 meshes. Seam each basket as follows:
- Whip stitch the two outer posts of that section to the two side edges of the strip. Match each wall mesh round to the strip row beside it. Gently ease in the cream bands.
- Whip stitch the 19 back sts of wall Round 1 across the strip, catching each dc post and ch-1 sp, for 19 to 19.
Put each basket’s bottom edge at the top of Rows 1, 15 and 29. Each step is 14 rows, or 7.0 in (17.8 cm). The basket bottoms sit at 0.2, 7.2 and 14.2 in (0.5, 18.3 and 36.1 cm).
Tension: Make each whip stitch snug but not tight. If you pull too hard the mesh puckers; if you sew too loosely the baskets tip forward.
Size checkpoint: Lay the piece flat. The gaps between baskets should be 1.9 in (4.8 cm) each once the borders are on.
Border
Border gauge: 18 sc = 4 in (10.2 cm). Each scallop is 6 sts wide, or 1.33 in (3.4 cm).
Work this border on each basket after it is attached.
Round 10 (cream, conversion round): Join cream at back center. Sc in each dc and each ch-1 sp around, then join.
Count: 36 sc in dc + 36 sc in sps = 72. On each side, half the round, that is 36 sts, including the back section of 19 sts.
Round 11 (scallops): Sc in the first st. Skip 2, 5 dc in next st, skip 2, sc in next st 11 times. Then skip 2, 5 dc in next st, skip 2, and join to the first sc.
Count: 12 scallops = 12 sc + 60 dc = 72. Fasten off.
Tack the back of Round 10 to the strip with 19 small stitches.
Why the math works: The base perimeter is 72, the wall is 72 (36 meshes x 2) and the edging is 72. Because 72 divides by 6, you get exactly 12 scallops with no partial repeat. Round 10 adds 0.2 in (0.5 cm) and Round 11 adds 0.5 in (1.3 cm), which gives the 0.7 in (1.8 cm) border. Wall height: 4.4 + 0.7 = 5.1 in (13.0 cm).
Final Blocking
- Mist the whole holder with water until damp, not soaked.
- Lay the strip flat and pin it to 4 in (10.2 cm) wide.
- Pin the mesh rows straight and square.
- Stuff each basket with a toilet roll wrapped in a plastic bag.
- Shape the bases into a heart: push the lobes out and pinch the tip.
- Pin each scallop into a rounded curve.
- Let everything dry completely, about 24 hours.
- Remove the rolls and pins.
Final Quality-Control Checklist
- Each base reads 72 sts in Rounds 12–14
- Each wall has 36 meshes on every mesh round
- The hearts are centered at the front and look the same on all three baskets
- The strip is 9 meshes wide, with taper rows at 7, 5 and 3 meshes
- The tab holds the ring securely
- Each basket has 12 even scallops
- Basket bottoms sit at 0.2, 7.2 and 14.2 in (0.5, 18.3 and 36.1 cm)
- All tails are woven in and secured
Troubleshooting
- Base ruffles: Your tension is too loose or you added extra increases. Go down a hook size.
- Base cups: Your tension is too tight. Go up a hook size.
- Heart lobes are flat: Check that you worked the 2-dc increases in Round 12.
- Wall won’t fit the base: Recount both pieces; each must be 72 sts.
- Mesh sags: Use a firmer cotton and block over a roll.
- Heart looks off-center: Re-place marker C directly opposite the join.
- Baskets tip forward: Add a horizontal seam along Round 9.
Care
Hand wash in cool water and lay flat to dry, reshaping the baskets over rolls. Do not tumble dry.

Final Notes
The size chain runs from your gauge to the finished holder:
- 18 sc = 4 in (10.2 cm), which gives a 4.4 in (11.2 cm) circle
- A 72-stitch heart base about 5.5 x 5 in (14.0 x 12.7 cm)
- A 72-stitch wall 16 in (40.6 cm) around
- A 9-mesh back section that matches the 4 in (10.2 cm) strip
- A 0.7 in (1.8 cm) scallop border that finishes each basket at 5.1 in (13.0 cm)
Check each step and the holder will hang straight.
Happy crocheting!