This beaded snowflake curtain turns a plain window into a winter scene. The Frost Window curtain is made of eight hanging strands. Each strand holds six lace snowflakes linked by short chains with wooden beads and ends in a full yarn tassel.
The strands alternate pale sky blue and royal blue across the rod. The natural wood beads add a warm, Scandinavian touch. Light passes through the open spokes of every snowflake, so the curtain looks good from inside and outside.
The pattern uses US crochet terms. Each snowflake measures 3.75 in (9.5 cm) from tip to tip and 3.25 in (8.3 cm) flat to flat. A finished strand is 40.75 in (103.5 cm) long including its hanging loop and tassel. With the strands spaced 4.5 in (11.4 cm) apart, the curtain covers 34.75 in (88.3 cm) of rod.
Construction is simple. You work 48 identical three-round snowflakes and block them. Then you link them into strands with beaded chain connectors, add a hanging loop at the top and a bead-and-tassel drop at the bottom, and slide the loops onto your rod.
Finished Size and Construction
- Finished curtain: 34.75 in (88.3 cm) wide × 40.75 in (103.5 cm) long
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK / light (#3) cotton
- Hook: 3.5 mm (E/4)
- Number of pieces: 48 snowflake motifs + 8 tassels
- Layout: 8 strands × 6 motifs, colors alternating by strand
- Piece size: 3.75 in (9.5 cm) tip to tip; 3.25 in (8.3 cm) flat to flat
- Size before border: A linked strand without its tassel drop is 34.5 in (87.6 cm)
- Border depth: There is no fabric border. The finishing consists of a 3.25 in (8.3 cm) hanging loop at the top and a 2.25 in (5.7 cm) bead drop plus a 4 in (10.2 cm) tassel at the bottom.
Materials
Choose a smooth mercerized or matte DK cotton. Cotton keeps the picots crisp and blocks well. Avoid fuzzy or very stretchy yarns, because the strands hang under their own weight and acrylic can lengthen over time.
- Color A, pale sky blue: 100 g / 230 m (2 × 50 g balls, about 115 m each)
- Color B, royal blue: 100 g / 230 m (2 × 50 g balls, about 115 m each)
Each color covers 24 motifs (about 144 m), 4 strands of loops and connectors (about 10 m) and 4 tassels (about 26 m). The quantities above include a margin of about 25% for swatching, tails and tension differences.
Tools:
- 3.5 mm (E/4) crochet hook
- 48 natural wooden beads, 12 mm, with holes at least 3 mm wide
- Tapestry needle
- Sharp scissors
- Stiff card 4.5 in (11.4 cm) tall for the tassels
- Blocking board or foam mats, rustproof pins
- Spray starch or fabric stiffener
- Tape measure
- Curtain rod or tension rod for hanging
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- trtr – triple treble crochet: yarn over 4 times, insert hook, yarn over and pull up a loop, then [yarn over, pull through 2 loops] 5 times
- sp – space
- st(s) – stitch(es)
Special stitch: Trefoil Tip. Work all of the following in the same stitch: sc, ch 3, sl st in 3rd ch from hook, ch 4, sl st in 4th ch from hook, ch 3, sl st in 3rd ch from hook, sc. This makes 2 sc and 3 picots, and the middle ch-4 picot is the largest. The middle picot is also your connection point when you link the strands.
Gauge and Checkpoints
Make one test snowflake before anything else. Lace motifs vary a lot between crocheters, and every strand measurement depends on this one piece.
- Chain gauge: 9 ch = 2 in (5.1 cm)
- After Round 1: the center ring measures 0.6 in (1.5 cm) across
- After Round 2: 3 in (7.6 cm) from spoke top to opposite spoke top
- After Round 3, blocked: 3.75 in (9.5 cm) tip to tip and 3.25 in (8.3 cm) flat to flat
If the motif is too big by more than 0.25 in (0.6 cm), go down to a 3.25 mm hook, or tighten your trtr spokes so the loops don’t sag.
If it is too small, go up to a 3.75 mm hook. Also check that your ch-6 spaces in Round 2 are not pulling the spokes inward. The edges should curve in slightly but should not pucker.

Snowflake Motif (make 48)
Make 24 motifs in Color A and 24 in Color B. Leave a 6 in (15.2 cm) tail at the start and end of each motif.
Round 1 (center ring): Make a magic ring. Ch 1, work 12 sc into the ring, then pull the ring tight, leaving a small open center. Sl st to the first sc to join. (12 sc)
Round 2 (spokes):
- Ch 6 (counts as the first trtr), ch 6, skip the next sc.
- Trtr in the next sc, ch 6, skip the next sc. Repeat from * 4 more times.
- Sl st to the 6th ch of the beginning ch-6 to join.
(6 trtr spokes and 6 ch-6 spaces)
The tall trtr stitches form the six spokes, and each ch-6 runs from one spoke top to the next. Together they form the outer frame, and the gaps between the spokes become the triangular windows.
Round 3 (fans and trefoil tips):
- Ch 1. Work a Trefoil Tip in the joining stitch at the top of the first spoke.
- Work (3 dc, ch 3, 3 dc) in the next ch-6 space.
- Trefoil Tip in the top of the next trtr, then (3 dc, ch 3, 3 dc) in the next ch-6 space. Repeat from * 4 more times.
- Sl st to the first sc to join and fasten off.
(12 sc, 36 dc, 18 picots, 6 ch-3 spaces)
Count check for Round 3: each of the 6 repeats holds 2 sc + 3 picots at the tip and 6 dc + 1 ch-3 along the side.
- 6 × 2 sc = 12 sc
- 6 × 6 dc = 36 dc
- 6 × 3 picots = 18 picots
The two 3-dc groups in each side sit at its ends, so every spoke top is hugged by a 3-dc group on each side. That builds the dense fan around each point. The ch-3 in the middle of each side forms the gently curved edge between points.
Weave in the tails along the back of the spokes so they don’t show through the windows.
Make All Pieces
- Color A (pale sky blue): 24 snowflakes, 4 tassels
- Color B (royal blue): 24 snowflakes, 4 tassels
Each strand uses a single color. The layout grid below shows the strands from left to right as they hang on the rod. Each letter is one snowflake, from row 1 at the top to row 6 at the bottom.
Strand: 1 2 3 4 5 6 7 8
Row 1: A B A B A B A B
Row 2: A B A B A B A B
Row 3: A B A B A B A B
Row 4: A B A B A B A B
Row 5: A B A B A B A B
Row 6: A B A B A B A B
Tassel: A B A B A B A B
Block all 48 motifs (see Final Blocking) before you link them. Flat, starched motifs are much easier to align tip to tip.
Joining
Motifs are joined vertically only. Each strand hangs on its own and the strands never connect to each other. Every link runs from the middle ch-4 picot of a bottom tip to the middle ch-4 picot of the top tip on the next motif. Orient each motif so that one trefoil tip points straight up and the opposite tip points straight down.
Connector (5 per strand, 40 total):
- Thread 1 bead onto the working yarn before you begin.
- Join the yarn with a sl st into the middle picot of the bottom tip of the upper motif.
- Ch 3, slide the bead up against the hook, then ch 1 behind the bead to lock it in place. Ch 3.
- Sl st into the middle picot of the top tip of the next motif and fasten off.
(7 ch and 1 bead per connector)
Stitch-to-stitch logic: each connector anchors in exactly one picot at each end, so the motifs stay centered and hang straight. Don’t join into the side sc of a tip, because the motif will tilt.
Tension: match your chain tension to the gauge chain (9 ch = 2 in / 5.1 cm). Loose connectors make strands of different lengths. Each finished connector, bead included, should measure 1.75 in (4.4 cm) from picot to picot.
Size checkpoint: once all 6 motifs and 5 connectors are linked, the strand measures about 31.25 in (79.4 cm) from top tip to bottom tip. This is 6 motifs at 3.75 in (9.5 cm) each plus 5 connectors at 1.75 in (4.4 cm) each. Lay all 8 strands side by side and compare them. Redo any connector that is off by more than 0.25 in (0.6 cm).
Border
This curtain has no fabric border, so there is no per-side stitch count to calculate. Instead, a hanging loop at the top and a bead drop with a tassel at the bottom frame each strand. They are worked identically on all 8 strands so the bottom edge hangs perfectly level.
Border gauge: 9 ch = 2 in (5.1 cm), the same as the connectors.
Top hanging loop (1 per strand): Join the yarn with a sl st in the middle picot of the top tip of motif 1. Ch 30, then sl st into the same picot to close the loop and fasten off. (30 ch per loop; 8 loops = 240 ch total)
The 30-ch loop is about 6.75 in (17.1 cm) around and folds over the rod to hang 3.25 in (8.3 cm) deep. With 3.25 in (8.3 cm) of loop added, the strand now measures 34.5 in (87.6 cm), which is the size before border listed above.
Bottom bead drop (1 per strand):
- Thread 1 bead onto the yarn.
- Join with a sl st in the middle picot of the bottom tip of motif 6.
- Ch 4, slide the bead up, ch 1 behind the bead, ch 4.
- Fasten off, leaving an 8 in (20.3 cm) tail.
(9 ch and 1 bead) The drop measures 2.25 in (5.7 cm).
Tassel (1 per strand, in the strand color):
- Wrap the yarn 25 times around the 4.5 in (11.4 cm) card.
- Slip a 10 in (25.4 cm) length of yarn under the wraps at the top and tie it tightly.
- Cut the wraps open along the bottom edge.
- Wrap a separate strand of yarn 6 times around the tassel, 0.75 in (1.9 cm) below the top, and tie it off. Hide the ends inside the tassel.
- Trim the bottom evenly to 4 in (10.2 cm).
- Thread the drop’s tail through the top of the tassel and knot it securely. Bury the end inside the tassel head.
Why the math works:
- Top loop: 3.25 in (8.3 cm)
- 6 motifs: 6 × 3.75 in (9.5 cm)
- 5 connectors: 5 × 1.75 in (4.4 cm), which is 8.75 in (22.2 cm)
- Bottom drop: 2.25 in (5.7 cm)
- Tassel: 4 in (10.2 cm)
Together these add up to 40.75 in (103.5 cm). Every strand uses the same chain counts, so the strands come out the same length and the tassels line up.
Final Blocking
- Block the motifs before joining, then do a light final press after assembly.
- Wet each motif in cool water and press out the excess in a towel. Don’t wring it.
- Pin it to the board over a template 3.75 in (9.5 cm) tip to tip. Put one pin in the middle picot of each tip.
- Pin each spoke straight, then open the triangular windows evenly.
- Shape the 3 picots at each tip into a neat trefoil, with the middle picot pointing straight out.
- Spray firmly with starch and let the motifs dry completely, for at least 6 hours.
- After assembly, hang the strands and lightly steam the tassels. Comb the tassel strands straight with your fingers.
Final Quality-Control Checklist
- 48 snowflakes total: 24 in Color A and 24 in Color B
- Each motif has 6 spokes, 36 dc and 18 picots
- Every motif blocks to 3.75 in (9.5 cm) tip to tip
- Connectors are 7 ch each, with the bead locked in the center
- Every connector is anchored in a middle picot at both ends
- All 8 hanging loops are 30 ch
- Every bottom drop is 9 ch with 1 bead
- Every tassel is trimmed to 4 in (10.2 cm)
- Each strand is 40.75 in (103.5 cm) long, within 0.25 in (0.6 cm)
- Colors alternate A, B across all 8 strands
- All tails are woven in and hidden behind the spokes
Troubleshooting
Spokes curl or twist: Your trtr stitches are uneven. Pull each loop up to the full height of the beginning ch-6, then pin the spokes straight when you block.
Sides ruffle: The ch-6 spaces are too long for your tension. Use ch 5 instead and keep (3 dc, ch 3, 3 dc) in each space.
Sides pucker inward too much: Your chains are too tight. Use a hook one size larger for the chain stitches only.
Bead slides along the chain: You skipped the locking ch 1 behind the bead. Undo the connector and work it again.
Strands hang at uneven lengths: Recount the connector chains and the hanging-loop chains, then measure each strand against the checkpoint.
Motifs tilt sideways: The connector is joined to a side sc instead of the middle picot. Move it to the middle picot.
Tassels look thin: Add 5 more wraps and keep the card height at 4.5 in (11.4 cm).
Care
Hand wash in cool water with mild soap, press flat in a towel, and re-block with starch. Don’t tumble dry, because the beads and the picots can be damaged.

Final Notes
Everything in this curtain comes from one measurement chain:
- Chain gauge: 9 ch = 2 in (5.1 cm)
- Each snowflake: 3.75 in (9.5 cm) tip to tip
- Each connector: 1.75 in (4.4 cm)
- Each hanging loop: 3.25 in (8.3 cm)
- Each bottom drop: 2.25 in (5.7 cm) plus a 4 in (10.2 cm) tassel
- Each strand: 40.75 in (103.5 cm) long
- Eight strands spaced 4.5 in (11.4 cm) apart cover 34.75 in (88.3 cm) of rod
Check the first motif carefully and the rest of the curtain will follow. Happy crocheting!