Golden Sunburst Hanging Toilet Paper Holder Crochet Pattern

This hanging toilet paper holder brings a little sunshine to the bathroom wall. A round mustard backplate carries a burst of cream rays, a snug basket sits on its lower half to hold one roll, and a doubled tab with a wooden ring lets it hang from any hook or towel bar.

The palette is just two colors: warm mustard for the body and soft cream for the rays, the basket bands, and the little sun appliqué on the basket front. The style is boho but tidy, with firm single crochet fabric and crisp, raised surface details.

The pattern uses US crochet terms. The finished holder measures about 9 in (22.9 cm) wide and about 13 in (33.0 cm) tall from the bottom edge to the top of the ring. The basket is 5.25 in (13.3 cm) across and 5.25 in (13.3 cm) tall, which fits a standard roll about 4.5 in (11.4 cm) wide.

Construction is simple. You crochet a flat circle for the backplate and add surface slip stitch rays. Then you crochet the basket from the base up with spike-stitch color bands, make a small sun appliqué, and work a short strip for the tab. Finally, you sew everything together and attach the ring.

Finished Size and Construction

  • Finished size: 9 in (22.9 cm) wide x about 13 in (33.0 cm) tall including ring
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4)
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 4 crocheted pieces (backplate, basket, sun appliqué, tab) plus 1 wooden ring
  • Layout: basket centered on the lower front of the backplate; tab centered at the top
  • Backplate size before border: 8.6 in (21.8 cm) diameter
  • Border depth: about 0.2 in (0.5 cm) per side, giving 9 in (22.9 cm)
  • Basket: 5.25 in (13.3 cm) diameter x 5.25 in (13.3 cm) tall
  • Sun appliqué: 2.9 in (7.4 cm) across
  • Tab: 1.5 in (3.8 cm) wide x 3 in (7.6 cm) long when folded

Materials

Choose a firm worsted yarn. Cotton or a cotton-acrylic blend works best because it holds its shape, so the basket will not sag under a roll. Avoid very soft or fuzzy yarns. The rays and spike bands look sharpest in a smooth, plied yarn.

  • Color A, Mustard: 70 g, about 126 m (138 yd)
  • Color B, Cream: 20 g, about 36 m (39 yd)

These quantities include a margin of roughly 30-40% over the measured amount, so you have room for a gauge swatch and a re-do.

Tools:

  • 5.0 mm (H-8) crochet hook
  • 1 wooden ring, 3 in (7.6 cm) outer diameter
  • Tapestry needle
  • 6 locking stitch markers (plus extra markers or scrap-yarn ties for placing the rays)
  • Scissors
  • Measuring tape
  • Pins and a blocking surface

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • BLO – back loop only
  • st(s) – stitch(es)
  • rnd – round
  • inc – 2 sc in the same st
  • rev sc – reverse single crochet (crab stitch)

Spike sc (spike): Insert the hook into the st one or two rnds below the next st (as stated). Yarn over and pull up a loop to the height of the current rnd. Yarn over and pull through both loops. Skip the st behind the spike on the current rnd.

Surface sl st: Hold the yarn behind the fabric. Insert the hook from front to back through the gap between two rnds and pull up a loop. Then insert the hook into the next gap outward, pull up a loop, and pull it through the loop on the hook.

Rev sc: Work sc from left to right (for right-handers), inserting the hook into the next st to the right.

Gauge and Checkpoints

Gauge: 16 sc x 16 rnds = 4 in (10.2 cm), in sc worked in the round.

Make the basket base (Rnds 1–11) first and use it as your test piece. It should measure 5.25 in (13.3 cm) across and lie flat.

Checkpoints:

  • Backplate Rnd 6: 2.9 in (7.4 cm)
  • Backplate Rnd 12: 5.7 in (14.5 cm)
  • Backplate Rnd 18: 8.6 in (21.8 cm)
  • Basket base Rnd 11: 5.25 in (13.3 cm)
  • Basket sides Rnd 31: 5 in (12.7 cm) of side height above the base
  • Sun appliqué: 2.9 in (7.4 cm) tip to tip

Too big? Go down to a 4.5 mm hook. Too small? Go up to a 5.5 mm hook. If the circle ruffles, your tension is loose. If it cups, your tension is tight. Change hooks rather than changing the stitch counts.

Golden-yellow crocheted basket with cream flower appliqué and white striped decorative trim.

Backplate

Work in continuous rnds with Color A. Put a marker in the first st of each rnd. Stagger the increases as written so the circle stays round.

Rnd 1: Magic ring, 6 sc in ring. (6)
Rnd 2: Inc in each st around. (12)
Rnd 3: Sc 1, inc 6 times. (18)
Rnd 4: Sc 1, inc, sc 2, inc 5 times, sc 1. (24)
Rnd 5: Sc 3, inc 6 times. (30)
Rnd 6: Sc 2, inc, sc 4, inc 5 times, sc 2. (36)

Checkpoint: 2.9 in (7.4 cm).

Rnd 7: Sc 5, inc 6 times. (42)
Rnd 8: Sc 3, inc, sc 6, inc 5 times, sc 3. (48)
Rnd 9: Sc 7, inc 6 times. (54)
Rnd 10: Sc 4, inc, sc 8, inc 5 times, sc 4. (60)
Rnd 11: Sc 9, inc 6 times. (66)
Rnd 12: Sc 5, inc, sc 10, inc 5 times, sc 5. (72)

Checkpoint: 5.7 in (14.5 cm).

Rnd 13: Sc 11, inc 6 times. (78)
Rnd 14: Sc 6, inc, sc 12, inc 5 times, sc 6. (84)
Rnd 15: Sc 13, inc 6 times. (90)
Rnd 16: Sc 7, inc, sc 14, inc 5 times, sc 7. (96)
Rnd 17: Sc 15, inc 6 times. (102)
Rnd 18: Sc 8, inc, sc 16, inc 5 times, sc 8. (108)

Checkpoint: 8.6 in (21.8 cm). Don’t fasten off. Put the working loop on a locking marker while you add the rays, then pick it up again for the border.

Sunburst Rays

Lay the plate flat, right side up. Place 18 markers on Rnd 6, one in every 2nd st (36 ÷ 18 = 2). Place a matching marker on Rnd 18 in every 6th st (108 ÷ 6 = 18), lining each one up straight out from its Rnd 6 partner.

For each ray, with Color B:

  1. Insert the hook in the gap between Rnd 5 and Rnd 6 at a marker and pull up a loop.
  2. Work 1 surface sl st into each gap outward, aiming at the Rnd 18 marker. End in the gap between Rnd 17 and Rnd 18. (12 sl sts)
  3. Move over one stitch column and work back inward next to the first line for 6 gaps. (6 sl sts)
  4. Fasten off and weave in the ends on the back.

Each ray has 18 sl sts: a single line near the center and a double line on the outer half, so it widens toward the edge. In total that is 18 rays and 324 sl sts. Work the rays at the same tension as your sc so the plate doesn’t pucker.

Basket

Base

With Color A, work Rnds 1–11 exactly as for the backplate. (66)

Checkpoint: 5.25 in (13.3 cm).

Sides

There are no more increases. Every side rnd has 66 sts.

Rnd 12: Change to Color B. Sc in BLO of each st around. (66)
Rnd 13: Sc in each st around. (66)
Rnd 14: Change to Color A. Sc 1, spike sc into the Rnd 12 st below the next st 33 times. (33 sc + 33 spikes = 66)
Rnds 15–26: Sc in each st around. (66 each rnd, 12 rnds)
Rnd 27: Change to Color B. Sc 1, spike sc into the Rnd 25 st below the next st 33 times. (33 sc + 33 spikes = 66)
Rnd 28: Sc in each st around. (66)
Rnds 29–31: Change to Color A. Sc in each st around. (66 each rnd)

Checkpoint: 20 side rnds = 5 in (12.7 cm). The circumference is 16.5 in (41.9 cm).

The BLO rnd makes a crisp corner at the base. Rnd 14 gives a cream band with mustard teeth dipping into it. Rnd 27 gives cream teeth dipping down into the mustard. The rim is finished in the Border section.

Sun Appliqué

With Color B:

Rnd 1: Magic ring, 6 sc. (6)
Rnd 2: Inc in each st. (12)
Rnd 3: Working in BLO for a ridged ring, sc 1, inc 6 times. (18)

Center checkpoint: 1.4 in (3.6 cm).

Rnd 4 (petals): Ch 4, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sl st in next st of Rnd 3 18 times. (18 petals)

Each petal is about 0.75 in (1.9 cm) long, so the sun measures 2.9 in (7.4 cm) across. Fasten off, leaving a long tail.

Tab

With Color A:

Row 1: Ch 7, sc in 2nd ch from hook and in each ch across. (6)
Rows 2–24: Ch 1, turn, sc in each st across. (6)

Checkpoint: 1.5 in (3.8 cm) x 6 in (15.2 cm). Fasten off, leaving a 24 in (61.0 cm) tail.

Make All Pieces

Piece Qty Colors
Backplate with rays 1 A body, B rays
Basket 1 A body, B bands
Sun appliqué 1 B
Tab 1 A
Wooden ring 1 —

Layout (front view):

        ( O )        <- wooden ring
        [ X ]        <- tab, upper box
     .--[ X ]--.     <- tab, lower box on plate
   /  \ \ | / /  \   <- backplate rays
  |  .---------.  |
  |  | basket  |  |  <- basket with sun motif
  |  |  (*)    |  |
   \ '---------' /
     '---------'

Joining

Use Color A and a tapestry needle for all seams unless noted. Keep the tension firm but not tight. The seams should hold the basket without dimpling the plate.

1. Sun to basket. Center the sun on the front of the basket between Rnd 15 and Rnd 26. Using Color B, whipstitch around the edge of Rnd 3, then tack each petal tip with one small stitch. The petal tips should sit just inside the cream bands.

2. Basket to backplate. Flatten the basket with the sun facing you. Mark the 12 center-back sts on Rnd 12. Place the basket on the plate so its base sits 0.5 in (1.3 cm) above the plate’s lower edge, centered left to right. Pin it in place.

  • Whipstitch the 12 marked base sts to the plate, 1 stitch per basket st.
  • From each end of those 12 sts, sew straight up the side, 1 stitch per rnd from Rnd 12 to Rnd 31. (20 stitches per side)
  • Leave the rim free.

That gives 12 + 20 + 20 = 52 anchoring stitches, enough to carry a full roll.

Size checkpoint: About 3.25 in (8.3 cm) of plate and rays should show above the basket rim.

3. Tab and ring. Fold the tab in half over the wooden ring so Row 1 meets Row 24. The doubled tab is 3 in (7.6 cm) long. Lay it on the front center top of the plate so the lower 1.5 in (3.8 cm) overlaps the plate.

Using the long tail, backstitch two boxes, each with an X through it:

  • Upper box: just below the ring, through both tab layers only. This locks the ring in place.
  • Lower box: on the overlapping part, through both tab layers and the plate. This attaches the tab.

Weave in all ends.

Border

The border goes on the backplate and the basket rim, both in Color A. If you like, work the border before joining, since the edge is easier to reach on a loose piece.

Border gauge: 1 rev sc per st. This keeps the edge the same length as the rnd below and adds about 0.2 in (0.5 cm).

Backplate Rnd 19: Pick up the parked loop. Rev sc in each st around. (108) Join with sl st and fasten off.

Basket Rnd 32: Rev sc in each st around. (66) Join with sl st and fasten off.

Why the math works: A flat sc circle needs 6 more sts in each new rnd. The border is not a new rnd of growth, though. It twists over the edge, so 1 rev sc per st keeps the edge flat. The plate grows from 8.6 in (21.8 cm) to 9 in (22.9 cm). On the basket, 66 rev sc match the 66-st sides, so the rim rolls neatly without flaring. With the 20 side rnds, the basket stands 5.25 in (13.3 cm) tall.

Final Blocking

  1. Lightly mist the backplate with water, or steam it from above without pressing the iron onto the fabric.
  2. Pin the plate to a 9 in (22.9 cm) circle, keeping the rays straight.
  3. Fill the basket with a toilet paper roll or a towel so it dries in a round shape.
  4. Let all pieces dry completely.
  5. Steam the tab lightly and press it flat with your fingers.

If you join before blocking, block the whole holder face up with the roll in the basket.

Final Quality-Control Checklist

  • The backplate lies flat and measures 9 in (22.9 cm).
  • There are 18 rays, evenly spaced and wider at the outer ends.
  • The basket is 5.25 in (13.3 cm) wide and tall, and the roll slides in easily.
  • Both spike bands show even teeth all the way around.
  • The sun is centered and every petal tip is tacked.
  • The basket base sits 0.5 in (1.3 cm) above the plate edge.
  • The tab is centered, the ring doesn’t slide, and both X boxes are neat.
  • All ends are woven in on the back.

Troubleshooting

Plate cups: Your tension is too tight. Go up a hook size.

Plate ruffles: Your tension is too loose. Go down a hook size.

Rays pucker: Undo them and rework the surface sl sts with a larger hook.

Rays drift sideways: Use the Rnd 18 markers as targets and check your line every 3 gaps.

Basket flares: Check that you didn’t add sts. Each side rnd is 66.

Spikes look loose: Pull the spike loop up only to the height of the rnd.

Basket sags: Add a second line of stitches along each side seam.

Roll doesn’t fit: Add one more base rnd (72 sts) and work the sides at 72.

Care

Hand wash in cool water, roll in a towel, and dry flat with a roll or towel inside the basket. Do not tumble dry.

Golden crocheted toilet paper holder with white daisy designs hanging on a beadboard bathroom wall beside green plants.

Final Notes

Follow the measurement chain and the holder comes together easily. Your gauge of 16 sc x 16 rnds = 4 in (10.2 cm) gives a 5.25 in (13.3 cm) basket base. The backplate measures 8.6 in (21.8 cm) before its border and 9 in (22.9 cm) after it. The basket sides add 5 in (12.7 cm), and the rim brings the basket to 5.25 in (13.3 cm). The 2.9 in (7.4 cm) sun fits in the 3 in (7.6 cm) mustard panel. With the tab and ring, the holder hangs about 13 in (33.0 cm) tall.

Hang it, add a roll, and enjoy a little sunshine every day. Happy crocheting!

Leave a Comment