This wall-hanging towel holder keeps rolled hand towels tidy and looks lovely doing it. A long cream backing panel hangs from a natural wooden ring, and three arched bands sit across the front like little hammocks. Each band has a soft apricot scallop edge along the bottom.
The colors are kept calm: warm cream for the body and a peachy apricot for the trim. The stitch columns give it a soft ribbed look, and the shells add a cottage-bathroom feel without being fussy.
This pattern uses US crochet terms. The finished backing panel measures 5.8 in (14.7 cm) wide by 22.1 in (56.1 cm) long, not counting the hanging tab and ring. Each band strip measures 3.5 in (8.9 cm) wide by 13.5 in (34.3 cm) long before it is sewn on.
Construction is simple. You work the panel in rounds around a foundation chain, which gives it naturally rounded ends. You make three smaller strips the same way, add scallops to one long side, and sew their rounded ends to the panel. Last, you work a two-round border around the panel, add the hanging tab, and fold it over the ring.
Finished Size and Construction
- Finished size: 5.8 in x 22.1 in (14.7 cm x 56.1 cm) panel; tab and ring add about 3 in (7.6 cm)
- Skill level: Easy
- Terminology: US
- Yarn weight: Worsted (#4), cotton recommended
- Hook: 5.0 mm (H-8)
- Number of pieces: 4 (1 backing panel, 3 band strips) plus 1 wooden ring
- Layout: 3 bands stacked vertically on 1 panel
- Piece size: band strip 3.5 in x 13.5 in (8.9 cm x 34.3 cm) including scallops
- Panel size before border: 4.8 in x 21.1 in (12.2 cm x 53.6 cm)
- Border depth: 0.5 in (1.3 cm), two rounds of sc
Materials
Choose a smooth worsted cotton or cotton blend. Cotton holds its shape when the pockets carry damp towels, and it copes with bathroom humidity better than acrylic. Avoid splitty yarn. The oval rounds and the shells look best with crisp stitch definition.
- Color A, cream: 250 g, about 425 m (465 yd)
- Color B, apricot/peach: 25 g, about 43 m (47 yd)
These quantities assume a yarn of about 170 m per 100 g and include a margin of roughly 15% for swatching and sewing.
Tools:
- 5.0 mm (H-8) crochet hook
- Wooden ring, 3 in (7.6 cm) outer diameter
- Tapestry needle
- 6 locking stitch markers
- Rust-proof pins
- Measuring tape and scissors
- Blocking mat or towel and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sc2tog – single crochet 2 together
- st(s) – stitch(es)
- Rnd – round
- sk – skip
Special stitch – Scallop: sk 1 st, 5 dc in next st, sk 1 st. A scallop uses 3 stitches of the row below. The sc between scallops uses 1 more, so each repeat uses 4 stitches.
Round notes: The ch 2 at the start of hdc rounds and the ch 1 at the start of sc rounds do not count as stitches. Join each round with a sl st to the first stitch.
Gauge and Checkpoints
Gauge: 14 hdc and 10 rows = 4 in (10.2 cm), in hdc worked in rows. In single crochet, 4 sc = 1 in (2.5 cm), and one sc round adds about 0.25 in (0.6 cm).
Make one band strip first. It is small, uses the same stitches as the panel, and quickly shows whether your gauge is on track.
Band strip checkpoints:
- After Rnd 1: 0.8 in x 11.4 in (2.0 cm x 29.0 cm)
- After Rnd 3: 2.4 in x 13.0 in (6.1 cm x 33.0 cm)
- After Rnd 4: 2.9 in x 13.5 in (7.4 cm x 34.3 cm)
- After scallops: 3.5 in (8.9 cm) wide at the scallop peaks
Panel checkpoints:
- After Rnd 1: 0.8 in x 17.1 in (2.0 cm x 43.4 cm)
- After Rnd 3: 2.4 in x 18.7 in (6.1 cm x 47.5 cm)
- After Rnd 6: 4.8 in x 21.1 in (12.2 cm x 53.6 cm)
If your strip is too long, go down half a hook size. If it is too short, go up half a size. If the length is right but the rounded ends cup, your increase stitches are too tight, so loosen your hdc slightly. If the ends ruffle, tighten slightly instead of changing the increase spacing.

Backing Panel
Use Color A.
Ch 61.
Rnd 1: Hdc in 3rd ch from hook and in next 57 ch (58 hdc), 5 hdc in last ch. Rotate to work along the opposite side of the foundation. Hdc in next 57 ch, 4 hdc in last ch (the same ch as the first hdc). Join. (124 sts)
You now have two straight sides of 57 sts and two ends of 5 sts: 57 + 57 + 5 + 5 = 124. Mark the first and last stitch of each end group, and move the markers up each round.
Rnd 2: Ch 2, hdc in 57 side sts, 2 hdc in each of 5 end sts, hdc in 57 side sts, 2 hdc in each of 5 end sts. Join. (134 sts: 57 per side, 10 per end)
Rnd 3: Ch 2, hdc in 57 side sts, (hdc in next st, 2 hdc in next st) x5, hdc in 57 side sts, (hdc in next st, 2 hdc in next st) x5. Join. (144 sts: 57 per side, 15 per end)
Rnd 4: Ch 2, hdc in 57 side sts, (hdc in next 2 sts, 2 hdc in next st) x5, hdc in 57 side sts, (hdc in next 2 sts, 2 hdc in next st) x5. Join. (154 sts: 57 per side, 20 per end)
Rnd 5: Ch 2, hdc in 57 side sts, (hdc in next 3 sts, 2 hdc in next st) x5, hdc in 57 side sts, (hdc in next 3 sts, 2 hdc in next st) x5. Join. (164 sts: 57 per side, 25 per end)
Rnd 6: Ch 2, hdc in 57 side sts, (hdc in next 4 sts, 2 hdc in next st) x5, hdc in 57 side sts, (hdc in next 4 sts, 2 hdc in next st) x5. Join. (174 sts: 57 per side, 30 per end)
Fasten off. The panel should measure 4.8 in x 21.1 in (12.2 cm x 53.6 cm). The 57 straight stitches give 16.3 in (41.4 cm) at gauge, and each rounded end adds 2.4 in (6.1 cm).
Band Strips
Each band uses Color A for the body and Color B for the scallops.
Ch 41.
Rnd 1: Hdc in 3rd ch from hook and in next 37 ch (38 hdc), 5 hdc in last ch. Rotate. Hdc in next 37 ch, 4 hdc in last ch. Join. (84 sts: 37 per side, 5 per end)
Rnd 2: Ch 2, hdc in 37 side sts, 2 hdc in each of 5 end sts, hdc in 37 side sts, 2 hdc in each of 5 end sts. Join. (94 sts: 37 per side, 10 per end)
Rnd 3: Ch 2, hdc in 37 side sts, (hdc in next st, 2 hdc in next st) x5, hdc in 37 side sts, (hdc in next st, 2 hdc in next st) x5. Join. (104 sts: 37 per side, 15 per end)
Rnd 4 (sc trim round): Ch 1, sc in 37 side sts, (sc in next 4 sts, 2 sc in next st) x3, sc in 37 side sts, (sc in next 4 sts, 2 sc in next st) x3. Join. (110 sts = 104 worked 1-per-stitch + 6 added; 37 per side, 18 per end)
Fasten off Color A. Place markers in the first and last stitch of one straight side (37 sts).
Scallop Row: With Color B, join with sc in the first marked st. (Scallop, sc in next st) x9. The last sc lands in the second marked stitch. Fasten off. (9 scallops; 10 sc + 45 dc = 55 sts, using all 37 side sts)
Here is the math: 1 starting sc + (9 repeats x 4 sts) = 37 sts, which is exactly one straight side. The rounded ends and the other long side stay plain cream.
Weave in all ends.
Make All Pieces
- Backing panel: 1, Color A only
- Band strips: 3, Color A body with Color B scallops
Layout (front view, top to bottom):
[ ring ]
[ tab ]
+-------------------+
| 3.0 in gap |
| [ Band 1 ]~~~~~~ |
| 3.0 in gap |
| [ Band 2 ]~~~~~~ |
| 3.0 in gap |
| [ Band 3 ]~~~~~~ |
| 2.6 in below |
+-------------------+
The “~” marks the scallop edge, which always faces down.
Joining
Sew the bands to the panel before you work the border. Lay the panel flat, right side up, with one rounded end at the top.
Placement: Measure down the center of the panel from the top of the Rnd 6 edge.
- Band 1 top edge: 3.0 in (7.6 cm)
- Band 2 top edge: 9.5 in (24.1 cm)
- Band 3 top edge: 16.0 in (40.6 cm)
Each band is 3.5 in (8.9 cm) tall. That makes the gaps between bands 3.0 in (7.6 cm). Band 3 ends at 19.5 in (49.5 cm), with 2.6 in (6.6 cm) of panel below it.
Method: Place a band right side up across the panel with the scallops pointing down. Lay each rounded end flat so its tip sits on Rnd 5, about 0.4 in (1.0 cm) in from the panel edge. Each end covers 1.5 in (3.8 cm), so the sewn areas sit 0.4 to 1.9 in (1.0 to 4.8 cm) in from each side. Let the middle of the band arch forward, then pin both ends.
Stitch-to-stitch logic: With Color A, whipstitch around each rounded end. Make one stitch through each of the 18 end sc of Rnd 4 and into the panel hdc directly beneath it. That is 18 sewing stitches per end and 36 per band. Then backstitch a straight line across the band, through both layers, where the curve meets the straight side.
After you subtract the two 1.5 in (3.8 cm) sewn ends from the 13.5 in (34.3 cm) strip, 10.5 in (26.7 cm) of band is left to form the arch. That arch holds a towel roll about 3.7 in (9.4 cm) across.
Tension: Sew firmly, but don’t pull. The panel underneath must stay flat, without puckers. Keep both ends of each band at the same height.
Size checkpoint: The panel still measures 4.8 in x 21.1 in (12.2 cm x 53.6 cm), and every Rnd 6 edge stitch is free to work into.
Border
Border gauge: 4 sc = 1 in (2.5 cm). Each sc round adds 0.25 in (0.6 cm) all around.
Join Color A with sc in the first side stitch of Rnd 6. This sc counts as the first stitch.
Rnd 7: Sc in 57 side sts, (sc in next 9 sts, 2 sc in next st) x3, sc in 57 side sts, (sc in next 9 sts, 2 sc in next st) x3. Join. (180 sts = 174 worked 1-per-stitch + 6 added; 57 per side, 33 per end)
Rnd 8: Ch 1, sc in 57 side sts, (sc in next 10 sts, 2 sc in next st) x3, sc in 57 side sts, (sc in next 10 sts, 2 sc in next st) x3. Join. (186 sts = 180 worked 1-per-stitch + 6 added; 57 per side, 36 per end) Fasten off.
Why the math works: The straight sides get exactly 1 sc per stitch, so they stay 16.3 in (41.4 cm) long. On each rounded end, 0.25 in (0.6 cm) of extra radius adds about 0.79 in (2.0 cm) to the half-circle edge. At gauge, that is about 3 sc, so each end gets 3 increases per round. The panel now measures 5.8 in x 22.1 in (14.7 cm x 56.1 cm).
Hanging Tab: At the top end, skip the first 12 of the 36 end sts so that the next 12 sts are centered. Join Color A in the first of those 12.
- Row 1: Ch 1, sc in 12 sts, turn. (12)
- Row 2: Ch 1, sc2tog, sc in next 8 sts, sc2tog, turn. (10)
- Row 3: Ch 1, sc in each st, turn. (10)
- Row 4: Ch 1, sc2tog, sc in next 6 sts, sc2tog, turn. (8)
- Row 5: Ch 1, sc in each st, turn. (8)
- Row 6: Ch 1, sc2tog, sc in next 4 sts, sc2tog, turn. (6)
- Rows 7–14: Ch 1, sc in each st, turn. (6)
The tab is about 1.5 in (3.8 cm) wide and 3.5 in (8.9 cm) long. Fold the last 2 in (5.1 cm) over the ring to the back. Whipstitch the final row to the back of Row 6, one stitch per sc.
Final Blocking
- Put a rolled towel in each pocket to hold the arch shape.
- Lay the holder flat and face up on a blocking mat.
- Mist the panel and bands until damp, not soaked.
- Pin the panel to 5.8 in x 22.1 in (14.7 cm x 56.1 cm).
- Pin each scallop peak lightly so the 9 shells sit evenly.
- Let it dry completely, at least 24 hours, before removing the pins.
Final Quality-Control Checklist
- The panel is 5.8 in x 22.1 in (14.7 cm x 56.1 cm) and lies flat.
- Both rounded ends are smooth, with no cupping or ruffling.
- Each band has 9 even scallops facing down.
- The bands are level and centered, with 3.0 in (7.6 cm) gaps between them.
- Each band end has 18 whipstitches and a backstitch line.
- The tab is centered and the ring is secure.
- All yarn ends are woven in on the back.
Troubleshooting
- Rounded ends cup: The increases are too tight. Work the end stitches more loosely.
- Rounded ends ruffle: Your tension is loose on the curves. Tighten it instead of skipping increases.
- Scallops don’t fit: Recount the straight side. The 9 repeats need exactly 37 sts.
- A band tilts: One end is higher than the other. Re-pin both tips on the same measured line.
- The panel puckers: The sewing is too tight. Remove it and resew more loosely.
- The holder sags when full: Add a second backstitch line to each band end.
Care
Hand wash in cool water with mild soap and press out the water in a towel. Dry flat with towel rolls in the pockets, and do not tumble dry.

Final Notes
Here is the measurement chain. Get 14 hdc to 4 in (10.2 cm), then check that one band measures 2.4 in x 13.0 in (6.1 cm x 33.0 cm) after Rnd 3. Grow the panel to 4.8 in x 21.1 in (12.2 cm x 53.6 cm). Sew the bands at 3.0, 9.5 and 16.0 in (7.6, 24.1 and 40.6 cm). The two-round border brings the panel to 5.8 in x 22.1 in (14.7 cm x 56.1 cm). Add the tab and ring, and the holder is ready to hang.
Happy crocheting!