This little letter S is worked in sage green and soft butter yellow stripes of lacy fans. Three tiny cream daisies with golden centers and green leaves sit on top. It hangs from a gold split ring on a short chain, so you can clip it to a bag handle, a set of keys, or a zipper pull.
The S has a fresh, cottage-garden look. Green fan rows sit at the bottom edge, across the middle, and along the top edge. Yellow fan rows fill the space in between, so the stripes stay easy to read even at this small size.
All instructions use US crochet terms. The finished letter measures 2.75 in (7.0 cm) wide by 3.25 in (8.3 cm) tall, without the hardware.
The letter is one flat piece made in 8 rows of fan stitch. Short rows and bridge chains shape the two open curves of the S, so you never sew the letter together. One round of border neatens the outline, and then you sew on the small daisies and leaves.
Finished Size and Construction
- Finished size: 2.75 in (7.0 cm) wide x 3.25 in (8.3 cm) tall; about 4.5 in (11.4 cm) long including ring and chain
- Skill level: Intermediate (short rows and bridge chains)
- Terminology: US
- Yarn weight: Fine (#2) sport-weight cotton
- Hook: 2.5 mm (between US B-1 and C-2)
- Number of pieces: 1 letter, plus 3 daisy appliqués and 6 leaf appliqués
- Layout: One single S letter worked flat in rows, bottom to top
- Letter size before border: 2.5 in (6.4 cm) wide x 3 in (7.6 cm) tall
- Border depth: 0.125 in (0.3 cm) on each outer edge
- Finished letter: 2.75 in (7.0 cm) x 3.25 in (8.3 cm)
Materials
Use a smooth mercerized cotton or cotton blend in sport weight, about 125 m per 50 g (2.5 m per gram). Cotton gives crisp fans and stands up well to daily handling on a bag.
- Color A, sage green: 4 g (10 m): Rows 1, 5, 8, border, and leaves
- Color B, butter yellow: 4 g (10 m): Rows 2, 3, 4, 6, 7
- Color C, cream: 2 g (5 m): daisy petals
- Color D, golden yellow: 1 g (2.5 m): daisy centers
These amounts include a margin for a test piece and for weaving in ends.
Tools:
- 2.5 mm crochet hook
- Tapestry needle
- Scissors
- Stitch marker
- 1 in (2.5 cm) gold split key ring
- 0.75 in (1.9 cm) length of gold chain (about 5 links)
- Two 8 mm (0.3 in) gold jump rings
- Two pairs of flat-nose pliers
- Rustproof pins and a foam blocking mat
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sk: skip
- st(s): stitch(es)
- rep: repeat
Special stitches:
- Fan: 5 dc in the same stitch.
- Half fan: 3 dc in the same stitch. At the start of a row, the ch-3 counts as the first dc.
- Petal: (ch 2, 2 dc, ch 2, sl st) all in the same stitch.
Color change: Work the last stitch of the row in the old color until 2 loops remain on the hook. Yarn over with the new color and pull it through. Cut the old color, leaving a 4 in (10.2 cm) tail.
Gauge and Checkpoints
Gauge:
– 1 fan repeat (6 sts) = 0.8 in (2.0 cm)
– 2 rows of fans = 0.75 in (1.9 cm)
– Border: 8 sc = 1 in (2.5 cm)
Gauge isn’t critical for a keychain, but it sets the final size and how open the curves of the S stay. Make one letter as your test piece and measure it at each checkpoint:
- After Row 1: 2.5 in (6.4 cm) wide
- After Row 2: 0.75 in (1.9 cm) tall
- After Row 4: 1.5 in (3.8 cm) tall
- After Row 6: 2.25 in (5.7 cm) tall
- After Row 8: 3 in (7.6 cm) tall
- After border: 2.75 in (7.0 cm) x 3.25 in (8.3 cm)
If your piece is too big, change to a 2.25 mm hook. If it is too small, or the fans look stiff and crowded, change to a 2.75 mm hook. Changing the hook by one size changes the width by about 0.25 in (0.6 cm).

Letter S
Edge notes: Row 1 is the right side (RS). With the RS facing you, Edge R is the right edge and Edge L is the left edge. Odd rows end at Edge L and even rows end at Edge R. The lower opening of the S is on the left and the upper opening is on the right.
Row 1 (RS), Color A: Ch 20. Sc in 2nd ch from hook, sk 2 ch, fan in next ch, sk 2 ch, sc in next ch; rep from * 2 more times. Change to Color B in the last sc. Turn.
(19 sts: 3 fans + 4 sc)*
Row 2 (WS), Color B: Ch 3 (counts as dc), 2 dc in first sc (half fan made), sk 2 dc, sc in center dc of next fan, sk 2 dc, fan in next sc; rep from * once more, sk 2 dc, sc in center dc of last fan, sk 2 dc, half fan in last sc. Turn.
(19 sts: 2 half fans + 2 fans + 3 sc)*
Rows 1 and 2 form the bottom stroke of the S.
Row 3 (RS, short row for the right connector), Color B: Ch 1, sc in first dc, sk 2 dc, fan in next sc, sk 2 dc, sc in center dc of next fan. Leave the rest of Row 2 unworked.
(7 sts: 1 fan + 2 sc)
Bridge chain: Ch 15. Turn.
The chain reaches across to Edge L. It leaves a one-row-tall opening above the 12 unworked stitches of Row 2. This opening is the lower curve of the S.
Row 4 (WS), Color B: 2 dc in 4th ch from hook (the skipped 3 ch count as a dc, so this makes a half fan). Sk 2 ch, sc in next ch, sk 2 ch, fan in next ch, sk 2 ch, sc in next ch. Sk the last 2 ch, fan in the last sc of Row 3, sk 2 dc, sc in center dc of fan, sk 2 dc, half fan in last sc. Change to Color A in the last dc. Turn.
(19 sts: 2 half fans + 2 fans + 3 sc. The 15 chains are used as 3 turning ch + 12 base ch.)
Row 5 (RS), Color A: Ch 1, sc in first dc, sk 2 dc, fan in next sc, sk 2 dc, sc in center dc of next fan; rep from * once more, sk 2 dc, fan in next sc, sk 2 dc, sc in top of turning ch. Change to Color B in the last sc. Turn.
(19 sts: 3 fans + 4 sc)*
Rows 4 and 5 form the diagonal spine of the S.
Row 6 (WS, short row for the left connector), Color B: Ch 3 (counts as dc), 2 dc in first sc, sk 2 dc, sc in center dc of next fan, sk 2 dc, half fan in next sc. Leave the rest of Row 5 unworked.
(7 sts: 2 half fans + 1 sc)
Bridge chain: Ch 13. Turn.
This chain reaches across to Edge R. It leaves the upper opening above the 12 unworked stitches of Row 5.
Row 7 (RS), Color B: Sc in 2nd ch from hook, sk 2 ch, fan in next ch, sk 2 ch, sc in next ch, sk 2 ch, fan in next ch. Sk the last 2 ch, then sc in the last dc of Row 6 (the dc the chain grew from). Sk 2 dc, fan in next sc, sk 2 dc, sc in top of turning ch. Change to Color A in the last sc. Turn.
(19 sts: 3 fans + 4 sc. The 13 chains are used as 1 turning ch + 12 base ch.)
Row 8 (WS), Color A: Work as Row 2. Do not fasten off.
(19 sts: 2 half fans + 2 fans + 3 sc)
The letter now measures 2.5 in (6.4 cm) x 3 in (7.6 cm). Weave in all tails except the working yarn, hiding each tail in a stripe of its own color.
Border
Border gauge: 8 sc = 1 in (2.5 cm). Along the side edges, work 2 sc in the end of each of Rows 1, 3, 5, and 7 (the sc edges). Work 3 sc in the end of each of Rows 2, 4, 6, and 8 (the dc edges). Inside the two openings, work loose sl sts so the openings stay open.
Border round, Color A: Ch 1, turn so the RS faces you.
- Top edge: 3 sc in first dc, sc in next 17 sts, 3 sc in top of turning ch. (23 sc)
- Left side:
- Work down the row ends of Rows 8, 7, 6, 5, 4: 3 + 2 + 3 + 2 + 3 = 13 sc.
- Loosely sl st in each of the 12 base ch on the underside of the Row 4 bridge chain.
- Work 2 sl sts in the inner row end of Row 3.
- Sl st in each of the 12 unworked sts of Row 2.
- Work 3 sc in the Row 2 end and 2 sc in the Row 1 end.
(13 sc + 26 sl st + 5 sc = 44 sts)
3. Bottom edge: Working into the opposite side of the foundation chain, 3 sc in first ch, sc in next 17 ch, 3 sc in last ch. (23 sc)
4. Right side:
– Work up the row ends of Rows 1, 2, 3, 4, 5: 2 + 3 + 2 + 3 + 2 = 12 sc.
– Sl st in each of the 12 unworked sts of Row 5.
– Work 2 sl sts in the inner row end of Row 6.
– Sl st in each of the 12 base ch on the underside of the Row 7 bridge chain.
– Work 2 sc in the Row 7 end and 3 sc in the Row 8 end.
(12 sc + 26 sl st + 5 sc = 43 sts)
Sl st to the first sc to join. Fasten off.
(Total: 23 + 44 + 23 + 43 = 133 sts)
Why the math works:
– Top and bottom: Each edge has 19 stitches. You work 1 sc in each stitch, plus 2 extra sc at each corner, which gives 23 sc. The corner stitches are already among the 19, so they aren’t counted twice.
– Sides: Each pair of rows is 0.75 in (1.9 cm) tall and takes 5 sc. That is slightly fewer stitches than the border gauge calls for, which keeps the side edges from ruffling.
– Openings: Each opening is matched 1 stitch to 1 stitch. Its 12 stitches equal 2 fan repeats, or 1.6 in (4.1 cm). Slip stitches add almost no height, so the openings stay clear.
– Final size: The border adds 0.125 in (0.3 cm) on every outer edge. That gives 2.5 + 0.25 = 2.75 in (7.0 cm) wide and 3 + 0.25 = 3.25 in (8.3 cm) tall.
Daisies (make 3)
Rnd 1, Color D: Make a magic ring, ch 1, 6 sc in ring. Pull the ring closed and sl st to first sc. Fasten off.
(6 sc)
Rnd 2, Color C: Join with a sl st in any sc. Petal in the same sc, sl st in next sc; rep from * 5 more times. Work the last sl st into the joining sl st. Fasten off, leaving an 8 in (20.3 cm) tail for sewing.
(6 petals)*
Each daisy is about 0.625 in (1.6 cm) across.
Leaves (make 6)
Color A: Ch 5. Sc in 2nd ch from hook, hdc in next ch, dc in next ch. In the last ch, work (hdc, ch 2, sl st in 2nd ch from hook, hdc) to make the pointed tip. Working along the other side of the chain, dc in next ch, hdc in next ch, sc in last ch. Sl st to first sc. Fasten off, leaving a 6 in (15.2 cm) tail.
Each leaf is about 0.5 in (1.3 cm) long.
Final Blocking
- Soak the letter in cool water, then press it between towels. Do not wring.
- Pin it RS up to 2.75 in (7.0 cm) x 3.25 in (8.3 cm).
- Pin each fan so it spreads out evenly.
- Open both openings to about 0.375 in (1.0 cm) tall and pin the bridge chains straight.
- Gently round the four outer corners with your fingertips so the S looks curved.
- Pin the daisies flat with each petal spread slightly. Pin the leaves so their tips are pointed.
- Let everything dry completely, at least 12 hours.
- Assemble:
- Sew one daisy on the top-right tip, one on the left edge over Rows 4–5, and one on the bottom-right corner.
- Tuck 2 leaves behind each daisy, angled out to either side, and sew them in place from the back.
- Open a jump ring with the pliers. Attach it through the border on the top edge, above the center of the left fan of Row 8, and link it to one end of the chain.
- Use the second jump ring to join the other end of the chain to the split ring.
- Close both jump rings fully.
Final Quality-Control Checklist
- Letter measures 2.75 in (7.0 cm) x 3.25 in (8.3 cm)
- Stripe order from the bottom: green, yellow, yellow, yellow, green, yellow, yellow, green
- Lower opening is on the left and upper opening is on the right, so the S reads correctly from the front
- Each full row has 19 sts and each connector row has 7 sts
- Border has 133 sts and lies flat, without puckers or ruffles
- Both openings stay open
- Daisies and leaves are sewn on firmly, with no stitching showing on the front
- Jump rings are fully closed, with no gaps
- All ends are woven in and trimmed
Troubleshooting
The S reads backward: Row 1 was used as the WS. Turn the piece over and use the other side as the front before you sew on the appliqués.
An opening has closed up: The border sl sts are too tight. Redo them more loosely, or use a hook one size larger.
The side edges ruffle: Work 2 sc instead of 3 sc in each dc row end.
The side edges curl inward: Work 1 more sc in each sc row end.
A bridge chain sags: The chain is looser than your stitches. Redo it with a smaller hook.
The fans lean to one side: Check that each sc sits in the center dc of the fan below it.
The ring pulls through the border: Attach the jump ring through 2 border stitches instead of 1.
Care
Hand wash in cool water with mild soap. Press the water out in a towel and dry flat in shape, and keep the metal parts dry to protect the gold finish.

Final Notes
Here is how the measurements fit together:
- 6 stitches make one fan repeat of 0.8 in (2.0 cm), so 19 stitches make the letter 2.5 in (6.4 cm) wide.
- 8 rows make it 3 in (7.6 cm) tall.
- A 0.125 in (0.3 cm) border brings the letter to 2.75 in (7.0 cm) x 3.25 in (8.3 cm).
If you meet each checkpoint, your stitch counts will match and the S will lie flat, ready for its daisies and a spot on your favorite bag.
Happy crocheting!