Blossom Stripe Letter A Keychain Crochet Pattern

This little letter A is a lacy, striped bag charm with a lot of personality. Fan-shaped shells stack up in alternating raspberry pink and cream rows. Open chain arches frame each fan, and three tiny cream flowers with yellow centers and green leaves sit on the shoulder and feet. A gold key ring at the top lets you clip it to a tote, backpack, or set of keys.

The style is romantic and a little vintage, like a doily shaped into a monogram. The two-color stripe shows the shell structure clearly, and the flowers soften the outline.

The pattern uses US crochet terms. The finished letter measures 3.75 in (9.5 cm) tall and 3.25 in (8.3 cm) wide at the base, not counting the key ring hardware.

You build the letter from the bottom up. First you make two pink feet. Then you work each row right to left with the right side facing, changing color every row. The crossbar fills in across a chain bridge, the legs work separately to leave the center hole open, and one shell closes the top. A short pink edging finishes the dome and the feet. Last, you sew on the flowers and leaves and attach the ring.

Finished Size and Construction

  • Finished size: 3.75 in (9.5 cm) tall × 3.25 in (8.3 cm) wide
  • Skill level: Intermediate (frequent color changes and stitch placement)
  • Terminology: US crochet terms
  • Yarn weight: Sport (#2) cotton
  • Hook: 2.75 mm (US C-2)
  • Number of pieces: 1 letter body, plus 3 flowers and 6 leaves as appliqués
  • Layout: Single motif, no joining
  • Piece size: 3.75 in (9.5 cm) × 3.25 in (8.3 cm)
  • Size before border: 3.5 in (8.9 cm) × 3.25 in (8.3 cm)
  • Border depth: 0.25 in (0.6 cm) at the top dome. The foot edging lies flat and adds no measurable height.

Materials

Use a smooth, mercerized or combed sport-weight cotton, about 150 m per 50 g (3 m per gram). Cotton keeps the shell definition crisp and stands up to life on a bag handle. Avoid fuzzy or very stretchy fibers, because the fans and arches will lose their shape.

  • Raspberry pink: 5 g / 15 m (rows 1, 3, 5, 7 and the edging)
  • Cream: 5 g / 15 m (rows 2, 4, 6 and the flower petals)
  • Sunflower yellow: 1 g / 3 m (flower centers)
  • Leaf green: 1 g / 3 m (leaves)

Tools:
– 2.75 mm (US C-2) crochet hook
– Tapestry needle
– Small sharp scissors
– 1 in (2.5 cm) gold split key ring
– Two 6 mm gold jump rings
– Two pairs of flat-nose pliers
– Stitch markers
– Rustproof pins, a spray bottle, and a blocking mat

All quantities include a margin of about 30% for gauge swatches and weaving in ends.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sh – shell
  • st(s) – stitch(es)
  • sp – space
  • sk – skip
  • RS / WS – right side / wrong side
  • rep – repeat

Special stitch – Shell (sh): 7 dc worked into the same stitch or chain.

Magic ring: an adjustable loop that you pull closed after working the first round.

Gauge and Checkpoints

Gauge: One shell measures 1 in (2.5 cm) across its top edge and 0.5 in (1.3 cm) tall.
Border gauge: 6 sc = 1 in (2.5 cm).

Make one foot (Row 1) as your test piece before you start. It should be 1 in (2.5 cm) wide and 0.5 in (1.3 cm) tall, with the first and last dc lying flat along the bottom.

Measurement checkpoints (height measured from the bottom of the feet):

  • After Row 1: each foot is 1 in (2.5 cm) wide × 0.5 in (1.3 cm) tall
  • After Row 2: 3.25 in (8.3 cm) wide, 1 in (2.5 cm) tall
  • After Row 3: 3.25 in (8.3 cm) wide, 1.5 in (3.8 cm) tall
  • After Row 4: 2 in (5.1 cm) tall; the hole base is about 0.5 in (1.3 cm) wide
  • After Row 6: 2.25 in (5.7 cm) wide, 3 in (7.6 cm) tall
  • After Row 7: dome 1.75 in (4.4 cm) wide, 3.5 in (8.9 cm) tall
  • After edging: 3.75 in (9.5 cm) tall

If your piece is too big, go down to a 2.5 mm hook. If it’s too small, go up to a 3 mm hook. If only the width is off, check whether your chain arches are loose. Chains that are too relaxed make the arches droop and widen the letter.

Handmade crochet flower charm in pink, cream, and white with yellow center attached to gold keyring on wooden surface.

Pattern Notes

  • Work every row with the RS facing, from right to left. Left-handed crocheters work left to right and get a mirror image, which makes no difference for a symmetrical A.
  • Cut the yarn at the end of each row or leg section. Start each new color with a sl st join.
  • At the start of a row, ch 1 does not count as a stitch.
  • Count the dc of a shell in the order you meet them as you work across.
  • Weave in the ends at the back as you go, keeping each tail inside its own color stripe.

Row 1 – Feet (Pink, Make 2)

Ch 4. Work 8 dc in the 4th ch from the hook. The skipped ch-3 counts as the first dc. (9 dc)

Fasten off. Open the fan into a half-circle so the first and last dc lie flat along the bottom.

Lay both feet flat with the fans pointing up, about 1 in (2.5 cm) apart. Together the row spans 3 in (7.6 cm).

Row 2 – Leg Shells and Bridge (Cream)

Join cream with a sl st in the top of the outer-end dc of the right foot.

Instructions: Ch 1, sc in the same st, ch 2, sk 3 dc, sh in the 5th dc, ch 2, sk 3 dc, sc in the 9th dc. Ch 9 for the bridge. On the left foot, sc in the first dc you meet, ch 2, sk 3 dc, sh in the 5th dc, ch 2, sk 3 dc, sc in the last dc. Fasten off.

Count: 2 shells (14 dc), 4 sc, 4 ch-2 sps, 1 ch-9 bridge.

The bridge should lie straight without pulling the feet together. Each cream shell sits directly above a foot, framed by its two ch-2 arches.

Row 3 – Crossbar (Pink)

Join pink with a sl st in the first sc.

Instructions: Ch 1, sc in the same sc, ch 2, sh in the 4th dc of the next shell, ch 2, sc in the next sc. Ch 2, sh in the 5th ch of the ch-9 bridge, ch 2, sc in the next sc. Ch 2, sh in the 4th dc of the next shell, ch 2, sc in the last sc. Fasten off.

Count: 3 shells (21 dc), 4 sc, 6 ch-2 sps.

The three shells will be called the first, center, and last shell. The center shell fills the bridge and makes the solid crossbar of the A.

Row 4 – Legs Begin (Cream, Worked Separately)

The legs now work as two short sections so the center hole stays open. Each shell moves two stitches inward so the legs lean toward each other.

First leg: Join cream in the first sc. Ch 1, sc in the same sc, ch 3, sh in the 6th dc of the first shell, ch 3, sc in the 2nd dc of the center shell. Fasten off.

Second leg: Join cream in the 6th dc of the center shell. Ch 1, sc in the same st, ch 3, sh in the 2nd dc of the last shell, ch 3, sc in the last sc. Fasten off.

Count per leg: 1 shell (7 dc), 2 sc, 2 ch-3 sps. Row total: 14 dc, 4 sc.

The 3rd, 4th, and 5th dc of the center shell stay bare. They form the bottom of the hole.

Row 5 – Legs Continue (Pink, Worked Separately)

First leg: Join pink in the first sc of the first leg. Ch 1, sc in the same sc, ch 3, sh in the 6th dc of the shell, ch 3, sc in the last sc of this leg. Fasten off.

Second leg: Join pink in the first sc of the second leg. Ch 1, sc in the same sc, ch 3, sh in the 2nd dc of the shell, ch 3, sc in the last sc. Fasten off.

Count per leg: 1 shell (7 dc), 2 sc, 2 ch-3 sps. Row total: 14 dc, 4 sc.

Row 6 – Closing the Hole (Cream)

Join cream in the first sc of the first leg.

Instructions: Ch 1, sc in the same sc, ch 3, sh in the 5th dc of the shell, ch 3, sc in the last sc of the first leg. Ch 3 for the top bridge. Sc in the first sc of the second leg, ch 3, sh in the 3rd dc of the shell, ch 3, sc in the last sc. Fasten off.

Count: 2 shells (14 dc), 4 sc, 4 ch-3 sps, 1 ch-3 top bridge.

The ch-3 bridge is slightly shorter than the gap. That pulls the top of the hole into a soft point, so the opening tapers like the counter of a printed A.

Row 7 – Top Shell (Pink)

Join pink in the first sc.

Instructions: Ch 1, sc in the same sc, ch 5, sc in the 4th dc of the first shell, ch 2, sh in the 2nd ch of the top bridge, ch 2, sc in the 4th dc of the second shell, ch 5, sc in the last sc. Do not fasten off.

Count: 1 shell (7 dc), 4 sc, 2 ch-5 sps, 2 ch-2 sps.

The ch-5 arches curve over the outer halves of the cream shells and form the shoulders of the dome.

Border

The side edges have no separate border. Each row’s own end sc and arches make the edge, so the pink and cream stripes run all the way to the outline, as in the finished piece. The border work is a pink top edging and a short edging under each foot.

Border gauge: 6 sc = 1 in (2.5 cm).

Top edging (pink, continuing from Row 7): Ch 1, turn so the WS faces you.

  • First side: sc in the first sc, 5 sc in the ch-5 sp, sc in the next sc, 2 sc in the ch-2 sp. (9 sc)
  • Shell top: sc in each of the 7 dc. (7 sc)
  • Second side: 2 sc in the ch-2 sp, sc in the next sc, 5 sc in the ch-5 sp, sc in the last sc. (9 sc)

Total: 25 sc, worked as 25 sc one-per-existing-stitch + 0 extra. Fasten off.

Foot edging (pink, make 2): With the RS facing, join pink at the outer bottom corner of a foot. Work 3 sc evenly along the post of the end dc, 1 sc in the foundation ch at the base of the fan, then 3 sc along the post of the other end dc. (7 sc per foot, 14 total) Fasten off.

Why the math works: The top edging places exactly one sc in each sc, in each chain of every chain space, and in each dc. Row 7 has 4 sc + 10 ch in the ch-5 sps + 4 ch in the ch-2 sps + 7 dc = 25 stitches, and the edging puts 25 sc into them. Nothing is added or skipped, so the dome lies flat without ruffling or cupping. Each dc post is 0.5 in (1.3 cm) tall, and 3 sc per post matches the border gauge of 6 sc per 1 in (2.5 cm). That keeps the foot bottoms flat and straight.

Flowers and Leaves

Flower (make 3):
– Rnd 1 (yellow): Magic ring, ch 1, 5 sc in the ring, sl st to the first sc. (5 sc) Fasten off.
– Rnd 2 (cream): Join with a sl st in any sc. [(Ch 2, 3 dc, ch 2, sl st) in the same sc as the last sl st, sl st in the next sc] 5 times. The final sl st lands in the joining st. (5 petals) Fasten off and leave a 6 in (15.2 cm) tail.

Each flower is about 0.75 in (1.9 cm) across.

Leaf (green, make 6): Ch 5. Sc in the 2nd ch from the hook, hdc in the next ch, dc in the next ch, (sc, ch 1, sc) in the last ch. Working along the other side of the foundation ch: dc in the next ch, hdc in the next ch, sc in the next ch, sl st in the tip. Fasten off and leave a tail.

Count: 8 stitches + ch-1. Each leaf is 0.5 in (1.3 cm) long.

Placement:
1. Flower 1: Sew it on the right edge where Rows 6 and 7 meet. Tuck two leaves behind it, one angled up and outward, one angled down and outward.
2. Flower 2: Sew it over the outer side of the left foot, straddling Rows 1 and 2. Tuck its leaves behind it, pointing outward to the left.
3. Flower 3: Sew it over the outer side of the right foot, straddling Rows 1 and 2. Tuck its leaves behind it, pointing outward to the right.

Sew through the yellow center and the base of each petal so the petals stay flat. Tack each leaf at its base from the back.

Final Blocking

  1. Weave in all remaining ends on the WS, each within its own color stripe.
  2. Pin the letter RS up on a blocking mat at 3.75 in (9.5 cm) tall × 3.25 in (8.3 cm) wide.
  3. Pin the feet so their bottoms line up along one straight line.
  4. Open each shell into an even fan and set a pin at the top of each chain arch.
  5. Pin the hole open into a narrow triangle about 0.5 in (1.3 cm) wide at its base.
  6. Spray until damp, not soaked. Let it dry completely, at least 6 hours.
  7. Unpin and attach the hardware. Open a jump ring with two pliers and pass it through the 13th sc of the top edging, which is the center stitch. Add the second jump ring, then hook on the split ring. Close each jump ring fully.

Block before attaching the hardware so the metal doesn’t mark or rust onto damp cotton.

Final Quality-Control Checklist

  • [ ] Height is 3.75 in (9.5 cm) and width at the base is 3.25 in (8.3 cm)
  • [ ] Rows alternate pink, cream, pink, cream, pink, cream, pink from the bottom up
  • [ ] The crossbar has 3 complete shells of 7 dc each
  • [ ] The center hole is open, with a 3-dc base and a pointed top
  • [ ] The top edging has 25 sc and each foot edging has 7 sc
  • [ ] Both legs lean inward evenly
  • [ ] All 3 flowers have 5 petals and 2 leaves each
  • [ ] Jump rings are fully closed and centered on the top edging
  • [ ] No ends show on the RS

Troubleshooting

The legs lean outward or stay straight. Check where you placed the Row 4 and Row 5 shells. They should go in the 6th dc on the first leg and the 2nd dc on the second leg, not the center dc.

The crossbar bulges. Your ch-9 bridge is too tight. Rework it a little looser, or use a ch-10 bridge and put the center shell in the 5th ch.

The top dome ruffles. You worked extra sc into a ch-5 sp. Recount the edging: 9 + 7 + 9 = 25.

The hole closed up. In Row 4, the inner sc must go in the 2nd and 6th dc of the center shell, leaving 3 dc bare between them.

The flowers cup. Use 2 dc per petal instead of 3, or block the flowers flat before sewing them on.

The letter curls. That’s almost always tight chain arches. Go up 0.25 mm for chains only, or block firmly.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat. Re-pin the shells if needed. Remove the metal ring before washing.

Crocheted pink strawberry keychain with white daisy flowers hanging from cream canvas bag by sunny window.

Final Notes

The measurement chain is simple. One shell is 1 in (2.5 cm) wide and 0.5 in (1.3 cm) tall. Seven rows of shells give you 3.5 in (8.9 cm) of height. The crossbar row sets the 3.25 in (8.3 cm) width. The 25-sc top edging adds the last 0.25 in (0.6 cm) for a finished height of 3.75 in (9.5 cm). If you check each checkpoint as you go, your letter will match these numbers without guesswork.

Once you’ve made this A, the same shell-and-arch method works for other letters, so you can stitch a full set of initials for friends and family.

Happy crocheting!

Leave a Comment