Raspberry Ripple Letter C Keychain Crochet Pattern

This letter C keychain is worked in a classic shell stitch. Stripes of raspberry pink and soft cream fans alternate up the letter, and a raspberry border frames the shape so the edges stay crisp. Three tiny cream daisies with yellow centers and sage green leaves sit on the curve like a small spring bouquet.

The style is light, lacy and a little vintage. The letter works as a bag charm or a name-initial gift, and it uses up leftover cotton.

The pattern uses US crochet terms. The finished letter measures 3 3/8 in (8.6 cm) wide by 4 in (10.2 cm) tall, not counting the keyring hardware.

Construction is flat and simple. You work the letter from the bottom up in 10 short shell rows, with every row worked on the right side. The bottom and top arms are full width. The middle rows cover only the spine on the left, which leaves the opening of the C. One round of sc borders the letter. Then you sew on the flowers and leaves and attach the keyring.

Finished Size and Construction

  • Finished size: 3 3/8 in (8.6 cm) wide x 4 in (10.2 cm) tall
  • Skill level: Advanced beginner to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Super fine (fingering) mercerized cotton or size 3 crochet thread
  • Hook: 2.5 mm
  • Number of pieces: 1 main letter, plus 3 flowers and 3 leaves as appliqués
  • Layout: Single letter, no joining
  • Piece size before border: 3 1/8 in (7.9 cm) wide x 3 3/4 in (9.5 cm) tall
  • Border depth: 1 round of sc, about 1/8 in (0.3 cm) on every edge

Materials

Choose a smooth, mercerized fingering-weight cotton. Cotton holds the shell shapes, blocks flat and stands up to life on a keyring. Avoid fuzzy or very stretchy fibers, because the fans lose their definition.

  • Color A, raspberry pink: 6 g, about 21 m (stripes and border)
  • Color B, cream: 7 g, about 24 m (stripes and flower petals)
  • Color C, yellow: 1 g, about 3 m (flower centers)
  • Color D, sage green: 1 g, about 4 m (leaves)

Quantities include a margin of about 20 percent for tails, swatching and differences in tension.

Tools:

  • 2.5 mm crochet hook
  • Tapestry needle
  • Scissors
  • Gold split keyring, 1 in (2.5 cm) across, with a gold chain about 3/4 in (1.9 cm) long
  • One gold jump ring and two pairs of flat-nose pliers
  • Rustproof pins and a blocking mat or folded towel
  • Spray bottle with water

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sk: skip
  • st(s): stitch(es)
  • RS: right side

Special stitches:

  • Shell: 5 dc in the same stitch.
  • Half shell: 3 dc in the same stitch. At the start of a row, ch 3 counts as the first dc, so the half shell is ch 3 and 2 dc in the same stitch.

Gauge and Checkpoints

Gauge: 4 shells (24 sts) = 3 in (7.6 cm) wide, and 4 shell rows = 1 1/2 in (3.8 cm) tall. Each 6-st shell repeat is 3/4 in (1.9 cm) wide, and each row is 3/8 in (1.0 cm) tall.

Rows 1 to 3 form the bottom arm of the letter and also serve as your gauge test. Work them first, block them lightly with a damp press and measure before you continue.

Checkpoints:

  • After Row 3: 3 1/8 in (7.9 cm) wide x 1 1/8 in (2.9 cm) tall.
  • After Row 7: the spine is 1 5/8 in (4.1 cm) wide, and the total height is 2 5/8 in (6.7 cm).
  • After Row 10: 3 1/8 in (7.9 cm) wide x 3 3/4 in (9.5 cm) tall.
  • After the border: 3 3/8 in (8.6 cm) wide x 4 in (10.2 cm) tall.

If your piece is too big, switch to a 2.25 mm hook. If it is too small, switch to a 2.75 mm hook. Change hooks before going further, because the border math depends on this gauge.

Handmade crochet number five keychain with pink and cream striped pattern, decorated with white daisies on wood background.

Pattern Notes

  • Every row is worked with the RS facing, from right to left. Left-handed crocheters work left to right, and the letter reads correctly once flipped.
  • Fasten off at the end of every row, leaving a 3 in (7.6 cm) tail. Join the next row at its right-hand end.
  • “First st” always means the first stitch made in the previous row, at its right-hand end. On rows that begin with ch 3, the top of that ch-3 is the first st.
  • Odd rows (color A) begin and end with sc. Even rows (color B) begin and end with half shells. Both kinds of row keep the same stitch count.

The Letter

Bottom Arm

Row 1 (A): Ch 26. Sc in 2nd ch from hook, [sk 2 ch, shell in next ch, sk 2 ch, sc in next ch] 4 times. Fasten off. (25 sts: 4 shells and 5 sc)

Row 2 (B): Join B with sl st in first st. Ch 3, 2 dc in same st, [sk 2 dc, sc in center dc of shell, sk 2 dc, shell in next sc] 3 times, sk 2 dc, sc in center dc, sk 2 dc, 3 dc in last sc. Fasten off. (25 sts: 2 half shells, 3 shells and 4 sc)

Row 3 (A): Join A with sl st in top of beginning ch-3. Ch 1, sc in same st, [sk 2 dc, shell in next sc, sk 2 dc, sc in center dc of next shell] 3 times, sk 2 dc, shell in next sc, sk 2 dc, sc in last st. Fasten off. (25 sts: 4 shells and 5 sc)

Spine

The spine sits over the left 13 sts of Row 3. Counting from the right, Row 3 reads as follows:

  • sc (st 1)
  • shell (sts 2–6)
  • sc (st 7)
  • shell (sts 8–12)
  • sc (st 13)
  • shell (sts 14–18)
  • sc (st 19)
  • shell (sts 20–24)
  • sc (st 25)

Row 4 (B): Join B with sl st in st 13. Ch 3, 2 dc in same st, sk 2 dc, sc in center dc of next shell, sk 2 dc, shell in next sc, sk 2 dc, sc in center dc of next shell, sk 2 dc, 3 dc in last sc. Fasten off. (13 sts: 2 half shells, 1 shell and 2 sc)

Row 5 (A): Join A with sl st in top of beginning ch-3. Ch 1, sc in same st, [sk 2 dc, shell in next sc, sk 2 dc, sc in next st] twice. Fasten off. (13 sts: 2 shells and 3 sc)

Row 6 (B): Join B with sl st in first st of Row 5, then work as Row 4 from the ch 3. (13 sts)

Row 7 (A): Work as Row 5. (13 sts)

Sts 1–12 of Row 3 stay unworked. They form the lower inner edge of the opening, which is 1 1/2 in (3.8 cm) wide and 1 1/2 in (3.8 cm) tall before the border.

Top Arm

Row 8 (B): Join B with sl st in first st of Row 7. Ch 15. In the 4th ch from hook work 2 dc (the skipped 3 ch count as the first dc). Then:

  • sk 2 ch, sc in next ch
  • sk 2 ch, shell in next ch
  • sk 2 ch, sc in next ch
  • sk 2 ch, shell in the sc that holds the joining sl st
  • sk 2 dc, sc in center dc of next shell
  • sk 2 dc, shell in next sc
  • sk 2 dc, sc in center dc of next shell
  • sk 2 dc, 3 dc in last sc

Fasten off. (25 sts: 2 half shells, 3 shells and 4 sc)

Of the 15 chains, 3 act as the first dc and 12 form the base across the opening. That puts sts 1–12 on the chain and sts 13–25 on Row 7, so Row 8 matches the 25 sts of the bottom arm.

Row 9 (A): Work as Row 3. (25 sts)

Row 10 (B): Work as Row 2. (25 sts)

Leave the ends unwoven for now.

Border

Border gauge: 8 sc = 1 in (2.5 cm), which matches the body gauge. Work 1 sc per stitch or chain along the tops and bottoms, and 3 sc into each row end.

Corners: The letter has 6 outside (convex) corners: top-left, top-right, bottom-left, bottom-right, and the inner tips of both arms. Work 2 sc into each of these corner stitches. The 2 inside (concave) corners where the arms meet the spine get no extra stitches. The edge counts below already include the extra corner sc.

Lay the tails along the edges and crochet over them as you go.

Round 1 (A): Join A with sl st in first st of Row 10 (the top-right corner). Ch 1, then work each edge in turn:

  • Top edge: 2 sc in first st, sc in next 23 sts, 2 sc in last st. (27 sc: 25 sts + 2 corner extras)
  • Outer left edge: 3 sc in each row end, Rows 10 down to 1. (30 sc)
  • Bottom edge: working in the free loops of the foundation ch, 2 sc in first ch, sc in next 23 ch, 2 sc in next ch. (27 sc: 25 sts + 2 corner extras)
  • Bottom arm end: 3 sc in each end of Rows 1–3. (9 sc)
  • Inner bottom edge: across the top of Row 3, 2 sc in st 1, sc in sts 2–12. (13 sc: 12 sts + 1 corner extra)
  • Inner spine edge: 3 sc in each end of Rows 4–7. (12 sc)
  • Inner top edge: in the free loops of the 12 base chains of Row 8, sc in next 11 ch, 2 sc in last ch. (13 sc: 12 sts + 1 corner extra)
  • Top arm end: 3 sc in each end of Rows 8–10. (9 sc)

Sl st to the first sc. Fasten off. (140 sc total)

Why the math works: 27 + 30 + 27 + 9 + 13 + 12 + 13 + 9 = 140. Each row is 3/8 in (1.0 cm) tall, and 3 sc at 1/8 in (0.3 cm) each cover that height exactly, so the edge neither ruffles nor pulls. Each body stitch gets 1 sc at the same 8-per-inch gauge, so the long edges stay true. Only the six outside corners gain a stitch, which keeps them softly rounded instead of cupped.

Flowers and Leaves

Flower (make 3)

Center (C): Make a magic ring, ch 1, 5 sc in ring. Pull the ring closed and sl st to the first sc. Fasten off. (5 sc)

Petals (B): Join B in any sc. In each sc around, work [sl st, ch 2, 2 dc, ch 2, sl st]. Fasten off, leaving a long tail. (5 petals)

Each flower measures about 3/4 in (1.9 cm) across.

Leaf (make 3)

With D: Ch 5. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in last ch, ch 1. Rotate and work along the other side of the chain: sc in same ch, hdc in next ch, sc in next ch, sl st in last ch. Fasten off, leaving a long tail. (8 sts)

Each leaf is about 1/2 in (1.3 cm) long.

Assembly

  1. Weave in all remaining ends on the wrong side, running them through the border sc.
  2. Block the letter (see the next section) before you sew on the flowers.
  3. Sew a leaf on the top-left curve of the top arm, then sew a flower over its base.
  4. Sew a leaf and then a flower on the middle of the left spine.
  5. Sew a leaf and then a flower on the bottom arm, near its tip.
  6. Open the jump ring with the two pliers. Thread it through the top-edge border about 3/4 in (1.9 cm) from the top-left corner, add the end link of the chain and close the ring fully.

Final Blocking

  1. Mist the letter until it is damp but not dripping.
  2. Lay it RS up on the mat.
  3. Pin the left edge to 4 in (10.2 cm) tall, easing the left corners into gentle curves.
  4. Pin the top and bottom edges to 3 3/8 in (8.6 cm) wide.
  5. Pin the opening so the inner edges are straight and parallel.
  6. Open each shell into an even fan with your fingertip.
  7. Let it dry fully, at least 4 hours, before you unpin it.

Final Quality-Control Checklist

  • Odd rows begin and end with sc. Even rows begin and end with half shells.
  • Rows 1–3 and 8–10 have 25 sts. Rows 4–7 have 13 sts.
  • The border has 140 sc, with 2 sc in each of the 6 outside corners.
  • The letter measures 3 3/8 in (8.6 cm) x 4 in (10.2 cm).
  • No tails show on the RS.
  • The flowers and leaves lie flat and are stitched down firmly.
  • The jump ring is completely closed.

Troubleshooting

Shells look crowded or curl: Your dc are tight. Go up a hook size.

Row-end edges ruffle: Your rows are shorter than gauge. Work 2 sc per row end instead.

Row-end edges pull in: Your rows are taller than gauge. Keep 3 sc per row end, but work them more loosely.

The Row 8 chain sags across the opening: Chain at the same tension as your stitches, and work the border snugly into the free loops.

A stitch count is off: Every sc must land in the center (3rd) dc of a shell below, and every shell must sit in an sc.

Inside corners bunch: Don’t add extra stitches there. Keep to the standard counts.

Care

Remove the keyring hardware first. Hand wash in cool water with mild soap, press the piece dry in a towel and reshape it flat to dry.

Crocheted letter charm with burgundy and cream stripes and white flowers hangs from beige canvas tote bag outdoors.

Final Notes

The measurement chain is short. A gauge of 6 sts = 3/4 in (1.9 cm) and 1 row = 3/8 in (1.0 cm) gives a 25-st, 10-row letter measuring 3 1/8 in (7.9 cm) x 3 3/4 in (9.5 cm). The 140-sc border adds 1/8 in (0.3 cm) on every edge, for a finished size of 3 3/8 in (8.6 cm) x 4 in (10.2 cm). Three daisies and a gold keyring finish the charm.

Happy crocheting!

Leave a Comment